Walk-Behind Weed Eater Trimmer - Will It Run?

[@BobTraweek]

Genius. Patient. Nicely done. Saved me from needless steps on fuel line replacement. Exactly what I needed to see with my poor eyesight... the fuel tank holes. Thank you.

[@carlousbray8026]

I got one just like that with the same problem...Thinking about selling it...Just bout primer and fuel line..havent installed it yet

[@mailgail1]

I just got the same model and was looking for how to fix it. Glad you were there. I’m going to start with the gas lines. Hope that’s all it needs.

[@brycelund4112]

Yep. If that doesn’t fix it I would recommend just replacing the carb or rebuilding it. Let me know if you have any questions when you get those lines replaced.

[@BobTraweek]

Those jet screws are a bear to adjust on my carb. EPA covers removed- revealed jet screws in a dual pit that I couldn't get a screwdriver on to adjust anything (no slot). Under a magnifying glass the screws look like there are serrated edges around the screw edges- housed inside the protective pit. I cannot get my smallest hemostat in the pit to attempt an adjustment. I almost had it fixed. Knowing Welbro it's probably an obsolete carb.

[@angelamartin7408]

I luv tat drill

[@brycelund4112]

Thanks

[@sidneywhite749]

Just got one of these. The primer bulb assembly is missing, whole thing. If I find one how does it connect.

[@davidknibbs9646]

I have the same one. What are the setting screws left one is what and the right side. I have the same problem with Maine and it fires up and stalls out. I put new lines and filter it was running great and then nexit time it didn't say running? 😊😮

[@brycelund4112]

It’s probably the diaphragms in the carb. And the screws I would start with them about a turn and a half out each and adjust from there.

[@dfields9511]

I just received one if these free. Been sitting outside for awhile

[@davidknibbs9646]

Iam going to try to make the hole in the Handel Bigger by the throttle cable for more Air?

[@kaptkrunchfpv]

Some of the older weedeater stuff is worth saving. Never seen one of these. Cool!

[@rickorell8989]

One cool DUDE

[@JGsgarage_unboxings]

Just bought one today for $25 at an estate sale. I will do a video on it as well. Eventually.

[@brycelund4112]

Yeah they are pretty cool. I’m gonna get a carb for mine because that adjustment screw kinda got bent and it needs a rebuild kit anyway. It kinda sucks that you have to replace the line every time it wears down though. Maybe I’ll make a video on putting a speed-feed on it.

[@JGsgarage_unboxings]

@@brycelund4112 nice I'll sub and check it out. Whenever you eventually upload it. I know this one will need a good carb cleaning. It's winter here and I won't be in my shop as much. Business is slow this time of year. Except snowblowers and saws

[@brycelund4112]

@@JGsgarage_unboxings thanks for subbing. Yeah maybe I’ll get to it this winter when stuff gets slow.

[@JGsgarage_unboxings]

@@brycelund4112 I definitely hear you there. I been doing different videos during winter. I'm running out of content ideas.

[@sidneywhite749]

Where can I get parts for fuel tank like fuel filter, primer bulb etc?

[@brycelund4112]

Amazon is the cheapest way.

[@ponygirl70]

What do you use for fluid in the ultrasonic cleaner?

[@brycelund4112]

Gunk carburetor parts cleaner.

[@rickywilson6214]

I am working on the same weed eater can you tell me is it 2 stroke or 4 stroke

[@brycelund4112]

2 stroke.

[@angelamartin7408]

I got one for $10 in better shape than this one. Looking to tune up, bcus this would b perfect since I hav a bad back. I hav a larger one we call the beast and it works just fine, it’s heavy duty.