Walkaround of my 2019 Fat Bob FXFBS - Almost all mods are done!

It was about time to do an updated walkaround video to show and talk about all of the mods that I've done on my 2019 Fat Bob (FXFBS). I've done quite a bit of stuff to the bike since the last walkaround I did. Below is a list of the items I cover in this video along with links to the specific channel videos on them or source links. And yeah... I was a bit taken aback getting all of this stuff listed out. That's a lot of stuff!
- Axle Nut Covers (Video): • Installing axle nut co...
- Memphis Shades Road Warrior: memphisshades.com/products/ro...
- Bolt Cover Caps: www.amazon.com/gp/product/B00...
- Memphis Shades Handguards: memphisshades.com/products/ha...
- Custom Dynamics LED Lights (front and rear): www.customdynamics.com/probea...
- PSR Journey Levers (Black): psr-usa.com/journey-anthem-adj...
- Kahuna Heated Grips: • Heated Kahuna Grips - ...
- Cruise Control: www.harley-davidson.com/store...
- Turn Signal Extension Caps: www.harley-davidson.com/store...
- CJ Motorsports Risers: cj-motorsports.com/products/f...
- SP Connect Bar Clamp Mount Pro: • How to install the SP ...
- Bar Clamp Bolt Caps - Source no longer available
- Overwatch Handlebar Bag: www.harley-davidson.com/store...
- Black Bolts for gauge: www.amazon.com/gp/product/B00...
- HD Mustache Engine Guard: www.harley-davidson.com/store...
- Orange Performance Spark Plug Cables: www.harley-davidson.com/store...
- Joker Machine Serrated Mini Floorboards: • Installing Joker Machi...
- Black Shift Lever (Video): • Replacing a front shif...
- Ciro Black Cap Kit for M8 (Video): • Putting the Ciro M8 Bl...
- 114 Derby Cover (Video): • Harley-Davidson Fat Bo...
- Ends Cuoio Beat Bag: www.endscuoio.com/product/beat/
- Givi Dolomiti 30ltr Top Case (Video): • Givi DLM30 top case in...
Reinhart 4.5” Mufflers: rinehartracing.com/product/4-...
Thrashin’ Supply Escape Bags (Video): • Thrashin Escape Bags F...
Rarebag Side Lid Bag: www.rarebag.de/taschen-fur-so...
Black Billet Brake Lever Replacement (Video): • How to replace the bra...
Buy channel t-shirts and mugs! - teespring.com/stores/being-he...
Instagram - go.BHNWPercy.com/Instragram
Facebook - go.BHNWPercy.com/Facebook
Want to swap stickers or send something to Percy?
BHNWP
PO Box 1377
Lorton, VA 22199-1377
-- My Bike --
2019 Harley-Davidson Fat Bob 114 (FXFBS)
• Rinehart 4.5" slip-ons
• Screamin' Eagle tuner
• Harley-Davidson 15" wind shield
• Memphis Shades Road Warrior Fairing
• Harley-Davidson Mustache engine guard
• Joker Machine Mini Serrated Floorboards
• PSR Journey adjustable levers
• Kahuna heated grips
• Memphis Shades hand guards
• Givi Trekker Dolomiti DLM30B 30ltr Monokey case
-- Primary Cameras at the Moment --
Nikon Z6
Nikon Df
Nikon 800
Fujifilm X-H1
Fujifilm X100v
GoPro Hero 8 Black
GoPro Hero 7 Black
GoPro Session 5
Video Editing Gear
iMac (circa 2014)
Adobe Premiere Pro
Adobe After Effects
Photoshop

[@RidinDad]

Looks killer man. It's very cool to see what you've done with the bike. It looks way different from typical fat bobs. awesome man!

[@withPercy]

Thanks! I tried to avoid doing anything typical or as expected. Much to the chagrin of Ms. Percy. LOL

[@larrycarvano3947]

I love the fact I love watching your videos because when you put something on your bike you put down the link to where you can get each item that is very cool I have the same bike as you if I keep it up it’s gonna start looking like you and Bike keep up the great videos and keep putting those links in thanks Larry

[@withPercy]

Thanks for all the kind comments, Larry! I'm really glad to hear the videos have been helping. Hearing stuff like that really helps me stay motivated to get content out there.

[@larrycarvano3947]

I have a 2019 fat Bob 114 S and I got those bolt covers and they really add a nice touch thanks for sharing that video I would have not known anything about that and like I said in my other comments I love the fact that you put down all the links keep up the good work

[@withPercy]

Glad to hear that! I think that the kit really does make a difference. What color scheme do you have on your Fat Bob?

[@davidjoel111]

This bike is beautifully build, love the small bags, the floor boards, the trunk, the style and the practicality in this bike are on point! I've been debating between this, a Lowrider S, or a touring model, but I don't think I want a big bike for every day commuting. I rented a Heritage for a few days, in paper it was the perfect bike for me but hated it, handles like a 18 wheeler. I test rode a Dyna fat bob a few years ago and loved it.

[@BurntupwoodburningByMatt]

Gorgeous bike Percy. Love them floorboards

[@withPercy]

Thanks, Matt. I love those things too!

[@samikamel9051]

Love the mods done on your bike, tasteful and elegant! I struggle from the same knee problem on my Fat Bob with the break paddle leaning forward too much. Your serrated brake pedal which is now much higher and closer to your foot is a brilliant solution! Appreciate if you can post web link for where to buy these from. Many thanks!

[@withPercy]

Thanks, Sami! Here's the link at HD to the Billet Brake Lever: www.harley-davidson.com/us/en/shop/satin-black-billet-brake-lever/p/41600219 and this is to the Brake Pedal Pad: www.harley-davidson.com/us/en/shop/dominion-small-brake-pedal-pad/p/50600269

[@gestoandlane]

Looks nice and those handguards are very practical :D

[@withPercy]

Thanks. And yeah, those handguards were a Godsend this winter.

[@VVoltz]

Looks killer. Thanks for the vid. I think my favorite mod are the new serrated mini floor boards with the new brake pedal with the bronze end, that looks amazing with the bronze heater shield. That whole setup is really really nice.

[@withPercy]

You get all the credit for there being any bronze at all on Sophie. I was definitely going to black out those shields before you started talking about how much you thought the bronze added a little contrast. But Sophie's not getting a boob job like Martha did. LOL

[@VVoltz]

Being Here Now, with Percy Thanks! Hey, we all win, you have an amazing looking bike and I love looking at your bike.

[@jampyzerozero6921]

Great Overview of mods. If you not done so I recommend keeping a google docs spreadsheet for part numbers etc.. this would help the community and make you fee cool :) Great Video!

[@withPercy]

That's a great idea!

[@kwamestamps35]

The bug just bit me and I got a used 2011 883. I would love to get this bike down the road. It's set up perfectly. I figure by the time I am experienced enough, you will be ready to move on to your next bike and you can sell me this one. Keep me in the loop. Cheers. 🤣🤣🤣

[@withPercy]

You never know!!! I might put her up for sale at some point.

[@CarlosAlfonsoGozz]

nice bike! hey i like the intro of your video, good job!

[@TheGorillaBiker]

The bike looks fantastic...you're so lucky so many parts are available for it and HD is mental expensive over there :) But yes that colour scheme is excellent, blacking out all the bits you have really makes all the colours pop.

[@withPercy]

Thanks, man. People keep telling me to add more orange but I disagree. I think the more I stay away from that, the more the scorched orange pops. Glad to hear someone agrees! LOL

[@TheGorillaBiker]

@@withPercy yes I agree 100%!! :) gotta keep that contrast :)

[@kidmoto22]

Love the walk around vids. They are better when you know the rider!! If you need some suggestions on how to continue to mod your bike I’ve got some ideas to help you spend your money

[@withPercy]

Thanks for the comment on the video. No thanks for the trouble maker offer though. 😜✌🏻

[@JB-up4pm]

Nice job. Looks great.

[@FenTour]

Love the heated grips, not just good at keeping warm but look great too...

[@withPercy]

And they are just a huge improvement over the stock grips in general. Much more comfortable.

[@FenTour]

@@withPercy Indeed, the bigger diameter suits my big hands too.

[@anthonyroe5246]

Great video! Very informative. Thank you!

[@withPercy]

Thank YOU for watching!

[@LaRangerDave]

I'm intrested in the adjustable levers for my wife's Triglide. Thanks for showing your bike to us.

[@withPercy]

Thanks for watching! Those PSR adjustable levers are incredible. They sure take a lot of strain and wear off your hands. Especially when you're in urban areas and doing a lot of braking and shifting.

[@SaddleTrampTV]

That bike really looks good with that fairing.

[@withPercy]

Thanks, man. I think I might need to got about another 2-3" up on the shield. Still catching a little too much air for long trips.

[@TheBigkal201]

Great video thanks nice bike as well

[@withPercy]

Really appreciate that feedback!

[@carltonbirds]

Very lovely 👍

[@DCyclemoto]

She lookin good!

[@withPercy]

Greatly appreciate that feedback coming from someone with such great creative taste!

[@snozzybosch7503]

Nice further upgrades man. One more thing I would add would be a flush fuel cap......? What do you think of those? I Love the flexibility of this bike and ability to take things off and on without too much grief as u pointed out nicely with this video’s montage. Questions: Who makes the RHS bag.......? Could you send me a link......? How many miles have you done now? Keep up the great work. Really like your channel.

[@withPercy]

Thanks so much! I've got about 8,500 miles on her at this point. It was 1 year this month that I got her. That small bag is made by a guy in Germany who custom makes bags and seat covers. His web site is www.rarebag.de The site is in German but if you use Chrome and tell it to translate the site you'll be good. Thanks for hanging out on the channel!

[@dongtiger1567]

改善 的 很完美！

[@withPercy]

Thank you!!

[@dongtiger1567]

@@withPercy 你懂中文？

[@kinnamng4135]

HI my engine heat is killing me when i stop at traffic, can i install Mid Frame Air Deflectors? But there is no model so far for Fat Bob 114. Can you recommend any model that can fit FB114?

[@withPercy]

Have you checked captain-itch.com/ ? I've heard some people say they've ordered stuff from him to keep the heat from burning their legs. I haven't had that issue myself since I replaced my pegs with mini boards.

[@DaveGme]

Can I ask where you got the black shift linkage and the black shift arm? I just purchased a brake arm from Crossthread Cycles. It was what I hated most about mine too. Not just that it was as ugly as a mud fence, but I had to “reach” for it way too much.

[@highlander69usa]

Great work on the channel dude. I’m enjoying the insight and potential options to use on changing up my Fat Bob. When you installed the CJ Motorsport risers, did you have to extend the cables at all? I have not been able to find any tutorials on how to install these. Thanks.

[@withPercy]

Thanks for the kind words!! Really appreciate that. The risers are super easy to install and did not require any modifications to the cables. I went with 1.5” risers and I’ve seen posts by other people who went with the CJ Motorsports up to 3” that said they did not have to replace/extend cables. If you go to the 2018+ Softails section of HDForums.com, there is a really long thread there from last summer/fall when he was fabricating these. Tons of information from people who installed different sizes. Search for CJ Motorsports in that forum and you’ll see the thread. Best of luck and thanks for watching!

[@highlander69usa]

I added the 1.5 inch risers and it really helps dial in the seating position. I’m very happy with them

[@ronpuchalski6388]

Looks Good! I went with Dougz Spartan fairing & painted it to match the bike. Ends Cuoio makes, arguably the best bag on the market. I have the Glam Rapid. Much larger than yours but fills that side in well, protects the side mount plate & balances well with the pipes. Got my Jokers ordered....trying to source the rear brake pedal from a dealer within range from me....they are scarce right now. How do I send you some pics??

[@withPercy]

Are you on Instagram? You can DM photos there. My ID is bhnwpercy. I'm also on Facebook facebook.com/bhnwpercy You are right about the Ends Cuoio bags. I'm torn right now between ordering another one for the exhaust side or having a Rarebag made. I LOVE those Cobra buckles on the Rarebag and they are much easier to get closed than the quick release on the EC Beat bag.

[@faithwalker2287]

Awesome! I like it! Rando question: Does this happen to you? When we stop in a parking lot, we choose an area where no one is around and when we come out, there are people parked next to us. Seriously?! With ALL the other spaces you have to choose next to us??? 🤦🏽‍♀️ 😂

[@withPercy]

OMG... that happens ALL. THE. TIME. Especially when I'm in my car. I normally go out of they way parking my forever car so I don't risk getting dings and dents. Unfortunately, there are a lot of forces in the universe that seem to take glee in seeing me stress walking back out to the parking lot. 😂

[@Glockg26]

Di you use the ant-scratch tape when installing the over-reach handlebar bag?

[@MrTointon]

I’d love to get those 1.5 inch risers…any chance you want to sell the smaller ones, now that you’ve added the larger ones?

[@withPercy]

Sorry. Those sold right after I published that video.

[@Jnu925]

Shes GORGEOUS man..

[@withPercy]

Back off, bro! This bitch is mine! LOL Can't wait to see if you pull the trigger and how you'll set yours up.

[@Jnu925]

@@withPercy Hay brother so just out of curiosity, I wanted to ask, how do you like the long distance ride fully packed with the stock shock?

[@paulspurlock599]

For someone who is planning on two up riding, is there a sissybar/bag combo you recommend? Also, I am surprised you haven't changed the seat out. Must be that comfortable eh?

[@withPercy]

I replaced the stock seat. Here's the video I did on that: kzbin.info/www/bejne/ppuTeWydrsZoZ7M I really like the Kuryakyn Vagabond bag but that might be too small for 2 people, depending on the length of the trip. You might look at the HD stock "tall" sissy bar (which isn't exactly "tall") and the HD luggage. It's really hard to beat their luggage for touring and it fits really well on the bike.

[@carlito3624]

Thank you for posting. Excellent description on everything. How did you know what size risers to order?

[@withPercy]

Hey Carlo - I knew that I wanted to bring the bars back towards me somewhere between 1-2" and raise them just a tad. So I went with the 1.5" risers which turned out perfect.

[@carlito3624]

Being Here Now, with Percy , thank you for the reply. I will try them Too. Thank you for posting link.

[@ronpuchalski6388]

Percy; What risers are those? My elbows are almost at full lock on the bike. Would like a little more bend but don't want to alter the egos too much.

[@ajalfaheem1176]

Hey, awesome video! I like your sissy bar and large case setup you have. Can I get a link to the sissy bar and case you have on? Thanks!

[@withPercy]

The sissy bar is the standard holdfast from HD: www.harley-davidson.com/us/en/shop/HoldFast-Sissy-Bar-Upright-Standard-Height-Gloss-Black/p/52300454 For the top case, check out this video that I did on that and how I mounted it: kzbin.info/www/bejne/oHvKnnuJhblngck (That case is not mounted on the same sissy bar that I linked to before.)

[@keithmcguire1082]

Great video. You mentioned that the SP Connect mount also holds your TomTom navigation device (in additional to your cell phone). I was looking at the SP Connect website, but I didn't see any cases for GPS navigation devices. Can you please explain how you attached your TomTom to that SP Connect mount? I'd like to use that same mount for either a cell phone or a GPS navigation device. Thanks!

[@withPercy]

Hey Keith - I put an SP Connect universal mount on the back of my TomTom. This mount just slid down between the ears on the back of my TomTom so I didn't even need to use the 3M on it. VVoltz did the same with his TomTom. We've both been traveling with our TomTom's mounted like this for over a year. Here's the mount on Amazon: amzn.to/3cuV6HG

[@keithmcguire1082]

@@withPercy Awesome! I really appreciate the quick response & the link!

[@FatbobRell]

Do you have a link to the cafe shield

[@tonyyanni2678]

Nice upgrades. I am interested in the black out cluster cover I tried to find one. Not successful. I really enjoy your videos. I have a black fat bob 2018. Thank you.

[@withPercy]

Hey Tony - Are you talking about blacking out the speedo gauge? If so... I'll be dropping a video on that very thing this Friday. Really appreciate you being a part of the channel community. If you want to DM me on Instagram (@bhnwp) and send me a mailing address, I'll drop.a poker chip and decal in the mail to you when I go to the post office this Friday. Stay safe!

[@tonyyanni2678]

Being Here Now, with Percy thank you, yes blacking out the speedo gauge. I’ll wait for your video. Stay safe

[@ajalfaheem1176]

What kind of mounting system do you have to buy so you can install the case firmly on your Fat Bob? Can i get a link please?

[@withPercy]

It is the Harley Holdfast 2-up Luggage rack (www.harley-davidson.com/us/en/shop/HoldFast-Two-Up-Luggage-Rack-Gloss-Black/p/50300140) plus a mounting plate. Check out the video I did on the case and how it's mounted here: kzbin.info/www/bejne/oHvKnnuJhblngck

[@tarmak968]

Consider Color matching the fairing. I got lucky with my 2019 Fat Bob as it is black.

[@withPercy]

I've thought about it but I haven't liked the look of that much orange on other FXFB's I've seen that have done that. I might change my mind, but I think I'm going to keep it black for now.

[@IchibanMoto]

@@withPercy maybe an orange accent stripe on the black

[@rickjames6462]

How many 8mm and 6mm bolt caps did you use? I'm going to order just not sure how many of each I need

[@withPercy]

Don't remember and I'm not at the house. I bought 1 package of each though and that was enough.

[@Glockg26]

Can you provide the EBay link for the black screws on the instrument cluster?

[@withPercy]

Here you go. Order them while they are listed because they go dark often. www.ebay.com/itm/2018-Harley-Davidson-FATBOB-Black-Riser-Caps-handlebars-HD-FXFB-SOFTAIL-FXFBS/303866761367?hash=item46bfded097:g:59cAAOSwK~RZ~b4V

[@jamesmac4447]

What’s that brake lever set up and model number ? And also what’s the foot pegs ? I want do mine before I ride it . Just got a 2023 version

[@withPercy]

Unfortunately, from what I understand, that brake lever is no longer available. People ask me about it all the time. It was a Harley part. The Mini-boards are from Joker Machine. If you search my channel, you’ll find a couple of videos that I did on them. Including ordering the correct part and how to install and adjust them.

[@jamesmac4447]

@@withPercy thanks

[@nunoantao8437]

Muito bom very nice

[@withPercy]

Thank you very much!

[@TheZuver1]

I have the same motorcycle 2022 sometimes less is better you buy the bike because you like it

[@bigluke4095]

Who is the brake lever manufacturer?

[@withPercy]

It’s a Harley-Davidson brake lever. If you watch the install video I have the part number in there, along with the install. The video is here: kzbin.info/www/bejne/enmoZ6WijpuBZpo

[@ianluca5323]

great fucking custom bro!!!!!!!!!

[@withPercy]

Thanks, man! Appreciate that!

[@ramsdellsvlog4144]

What foot controls are those?

[@withPercy]

Joker Machine Serrated Mini Boards. I've done a couple of videos about them. Super nice. I highly recommend them for the Fat Bob.

[@azstarlink9781]

Who makes tha bag?

[@withPercy]

The Beat bag on the clutch side is from Ends Cuoio (www.endscuoio.com/) and the small back on the exhaust side is from Rarebag (rarebag.de).

[@brettbonz121]

First mod should’ve been to remove the sticker off your air cleaner

[@chrisbrintnell3590]

Get the cat out of that bike easy to do and it still will have the cat # if it got a cam big improvement and it looks stock you need a catch can and a Trax vent or vented dip stick make it romp.

[@laryangel4082]

L