Walkera Bind

[@johndarcy9594]

Peter, you are so clear that even I at 68 can understand .. thank you so much.

[@birdmantelly007]

My two Commercial Drones (Walkera and Cheerson) have been converted. I now use Radiolink mini pix with standard radios. This was not easy at first but I find that problems are more easily resolved.

[@newozuser]

Good Day Peter, I am new to both the Dev0-7 and the 450 quad that I am putting together. The quad will be using APM 2.8 (with external GPS) and 920Kv, 2213 T-Motors. No extra gimmicks like telemetry, MiniOSD etc for now, may be a few weeks later... I have also purchased the LiPo Balanced charger - iMax B6 with 3 LiPo 2200 maH batteries. I am waiting for the T-Motors and the APM 2.8 and GPS which will arrive tomorrow. After mucking around with the Devo-7 I ended up with 'Thkls error' on start-up screen. I tried to reset the RC... but it keeps coming back. Would you be able to help... troubleshoot some of my initial issues with setting up the APM 2.8 and with Devo-7. If you could, that would be greatly appreciated. Newozuser

[@birdmantelly007]

Can you bind test the receiver out of the copter? Before removing it note all details of connections between the receiver and the flight controller.

[@droneready8278]

My Devo7 is stuck on throttle hold mode and I cant get it out for nothing.

[@birdmantelly007]

The Walkera range has expanded beyond my ability to unravel their mysteries. The bigger retailers can be useful as a first step. If desperate, try the Forums when you are feeling calm. Best wishes.

[@birdmantelly007]

When asking a question in a language other than English I need to be certain which language you are using . I do try to respond to international queries.

[@mikewaterman1905]

Can you hook up the Devo 7 transmitter to a RC car? ?

[@rpaull3]

they had model planes 52 years ago?!

[@birdmantelly007]

They did. They did !!!! I am living proof !!!

[@leonardobarreto3480]

Hi Peter, i hope you are doing fine. I updated my QR x 350 anda my receiver Devo F7 stop work it's dont bind to my drone and de right green light blind fast. could you please help me? regards

[@madforit9661]

Follwed your instruction and i am getting one rear light on the quad it still wont bind Can you help?

[@napadolmarican830]

I want to seting in mornitor drone

[@birdmantelly007]

sorry can't help with this one. never had the pro version. have you checked any forums ?

[@paulmcmahon1774]

H i Peter A noob question ! I have the white Devo 10 ,but I lost the x350 pro ,it fell out of the sky with only five flights under its belt :( it was a lot of money down the drain :( anyway my question is what is this FIXED I D and what does it refare to ,??? is it the model ? I have the tx like I said ,iam going to build a 350 pro with the shell I bought and a601 reciver and a cc3D flight controler board with a G P S module four 2212 motors ect, I havent used the trany for about two years now so Iam still looking at the TX and its functions,I have a TX Dx6i but they say you can hack this TX with fimware and you cn us the dms orange recivers ! the reason why I want to usw the DEvo 10 is it Has a 2 KM range ,any help on this TX and the FIXED thing would be good Peter.

[@ocularocular8722]

Hi I bought new Walkera x350 pro. and i want ask you if you know how to do new Calibration cause I do wrong Calibration when I start Walkera Can you help me in that Thanks friends

[@bulenboncuk426]

Walkera 200lm için Bind Yapma orijinal alcı ile yapmak kumadayı çalıştır modtan giriş yapın receiveri tıklayın run yap tıklayın noktalar gidip gelirken Bind kaplosunu alıcıya takın alıcınız eşleşmiş olacaktır.tskl.

[@danhuus]

Hey peter, thank you for this video,

[@barunmukhopadhyay]

Hello Peter excellent Video tutorial ; can you put a video for Walkera Mini CP Flybarless Set up and swash plate levelling with Devo 7E transmitter , pls pls

[@heullydronenacaptura8964]

boa noite depois que calibrei o devo 7 meu gps parou de funcionar digo a chave que ativava o gps o led continua piscando mais não entra no moto gps poderia me ajuda a calibra a chave de ativação do gps e um Qr x350 pro.

[@santiagomedina1962]

Good day friend, you can help me, I followed the steps but I can not link the DEVO7 to my walkera, I do not know what else to do, I pressed the reset button and it still does not work ... you can help me

[@rpaull3]

i'm about to sell my hunk of junk qr x350 "Pro"... because I can't download the software that will allow my computer to connect to it. I'll try a few more times tho before I give up, and thank you for this vid.

[@rcpete7055]

Thanks

[@mattp9361]

He never even showed how to bind!

[@sdjb111]

I am late to the game, But that is cool. Thank you sir.

[@susanthajayakodi6593]

thanks

[@Rcgermany]

Super Video kann nur deutsch schreiben...👨🏻‍💻👴

[@frankrusselldesign7563]

Apart from the menu, the solid construction and the overall quality which is great, this is the worst radio I have ever had the misfortune to own. The binding is terrible and unreliable. The instructions are almost none existent and confusing. Do not buy a Devo Radio.