Tap to unmute

Setting A Throttle Curve (Expo) on your Devo 7 Transmitter

  Рет қаралды 31,109

PowerScissor

PowerScissor

Күн бұрын

Пікірлер: 74
@barnboy3168
@barnboy3168 5 жыл бұрын
I can’t thank you enough PowerScissor. You just made my F210 3D easy to fly at the hover point! For the folks having issue, go to the bottom of the THCRV menu to SWITC POS 0 and press ENT. Then cycle down until you see D/R and make sure it is ACT. Then this trick works. Wow!!!!!
@RolandDobranszky
@RolandDobranszky 5 жыл бұрын
alleluja! you know the answer what i searchin for on hour...thx dude :)
@briandee98
@briandee98 8 жыл бұрын
Guys its so easy to follow the video tutorial. Dont ask if you dont know how to use your f210 devo 7 controller. Before messing up with the curves atleast you should know how to backup and restore your save settings.
@ArthurRodriguez
@ArthurRodriguez 7 жыл бұрын
Thanks a bunch!! Just got this squared away. What a crazy throttle ramp. This little thing was super squirrelly. Hopefully now it’s a little more manageable on the lower end.
@bryanblood4531
@bryanblood4531 6 жыл бұрын
Thanks dude. Worked perfectly. My DV7 had a slightly different menu from yours but your explanation was good enough to figure it out. Appreciated.
@PowerScissor
@PowerScissor 6 жыл бұрын
Glad it's still helping people out. Getting a good throttle curve makes a huge difference in flying.
@vineyardsaker6195
@vineyardsaker6195 5 жыл бұрын
This is very useful, especially for somebody not using BF/CF. Thank you!!
@BrentCartwright-DocsLabAudio
@BrentCartwright-DocsLabAudio 9 ай бұрын
I set mine 9.3, 18.6, 28, 37.3, 55 and 90, for control in the lower end and around hover, then punch lol ha-ha, it gives reduced rates in lower end and around hover point.. thanks for the help.
@joeknowsavings
@joeknowsavings 7 жыл бұрын
Great video! Thanks for this, it helped immensely although activating the D/R switch was lacking, the rest was great. Thank again!
@pauljohnsson2927
@pauljohnsson2927 8 жыл бұрын
Guys! for those who followed the video and still didnt make it to work, its bec u havent activated the switch "D/R". To do that (Press)... THCRV (ENT) / SET SRVHD (YES, ENT) / (DN) down to SWITC (ENT) / (DN) down to D/R INH (R to toggle on or off for that switch). Then head to MONIT and toggle the D/R switch or just exit out the menu completely and see it there.
@pauljohnsson2927
@pauljohnsson2927 8 жыл бұрын
m8, Are u sure u click ENT when u at SRVHD? set it to YES and then click ENT, after that just scroll down to SWITC and continue with ur settings btw i just read ur former post about u having the 3D F210, as i dont have the 3D version i am not sure its the same structure in the menu of ur controller.
@pauljohnsson2927
@pauljohnsson2927 8 жыл бұрын
Kev, now that i think about it, did u follow PowerScissors video first bef attempting to add my method? (my description is an addition to his and maybe "unlocks" what u r looking for...)
@PowerScissor
@PowerScissor 7 жыл бұрын
I've been super busy with a new baby lately so haven't replied much. But I just found out that the Devo7 gets set up differently depending on what model it's shipped with. You might need to activate certain switches if they are deactivated by default for you. All mine came activated, but my friends wasn't.
@craigshipley4050
@craigshipley4050 2 жыл бұрын
Nice job explaining this. Thank you.
@craigshipley4050
@craigshipley4050 2 жыл бұрын
The quadratic equation when values are represented on a x ,y coordinate graft. A curved perobala line Is produced. It's Perfect in my opinion for a speed controlled throttle .
@nutharatharnvorawong8967
@nutharatharnvorawong8967 8 жыл бұрын
Hi thanks for video. I have question. What is the "THSTK" menu for. It is between "Outpu" and "SWITC". I believe it stands for Throttle Stick but I have no idea whether leave it off or enable it. You can see in the video at 8:06. Anyone knows this please help. I've tried google around but could not find any pages/posts/clips that explain. Thanks.
@rbhamric1
@rbhamric1 8 жыл бұрын
When I go to the monitor, nothing happens when I flip the switch. I went through the video multiple times and as far as I can tell I set everything just as you did. Obviously I missing something???
@briandee98
@briandee98 8 жыл бұрын
Thanks for the tips. you save my day!
@ianrice1778
@ianrice1778 8 жыл бұрын
This is going to help with my f210 n 150 thank you sir! all my other tx are so easy to set throttle curve n expo but the devo 7👎
@davesilva9174
@davesilva9174 7 жыл бұрын
Hi. Can you do a full set up for the F210 3D with a Devo 10? I haven't upgraded my Devo 10 to Deviation yet but considering soon. Your thoughts on Deviations? Thanks!
@SteveO4478
@SteveO4478 7 жыл бұрын
Maybe you can be of help I have the aux 1 and aux 2 on the same channels on CF mapping. I've tried to fix it in the transmitter but no luck. I have the F210 w/devo 7.
@nosikovandrey8404
@nosikovandrey8404 8 жыл бұрын
good job, guy!
@senditfpv6538
@senditfpv6538 8 жыл бұрын
Informative vid 👍 I've just sorted my d/rates on the same switch so is there a way to program t/curve to another? God I miss my ds6, so much simpler with better displays. Loving the f210 😍 newbie with devo
@PowerScissor
@PowerScissor 8 жыл бұрын
Yes there is. I won't have my Devo 7 in my hands this week to explain exactly how...but you can set it to the toggle switch that is on the right side also (I have it set to both in my current setup)
@mriffle50
@mriffle50 8 жыл бұрын
Great Video!
@JaxTellerRC
@JaxTellerRC 8 жыл бұрын
Awesome man thanks for this! Liked and subbed
@PowerScissor
@PowerScissor 8 жыл бұрын
Thanks, I liked your work on the Sons of Anarchy.
@JaxTellerRC
@JaxTellerRC 8 жыл бұрын
PowerScissor Ha ha, cheers man (-:
@JJBfilm
@JJBfilm 8 жыл бұрын
This video helped me out big time.. Thanks for sharing..I do have a question re: setting up the rate mode switch..The instructions you gave were excellent, however the switch is not changing the rates back to the factory rates.. The rates did change in the d7. But the switch does not seem to respond..Any help would be appreciated.."newbe"
@PowerScissor
@PowerScissor 8 жыл бұрын
I'm not sure exactly what you're asking. Check FMD switch and see if you saved your settings there. It's been a while since I've messed with a Devo7, but I remember it being easy to change that switch on accident.
@JJBfilm
@JJBfilm 8 жыл бұрын
+PowerScissor thank you...got it, all good
@davesilva9174
@davesilva9174 8 жыл бұрын
Hi. Was excited to see your video here since I'm a newbie at this and I wanted to calibrate the DEVO7 for a more "beginner" flight mode. I Entered all your digits as instructed but when I check in "Monitor" mode, Throttle starts at 0 with the stick in the MIDDLE position, and displays -100 when all the way down and +100 all the way up?! When I double check OUT of "Monitor" Mode, like you did, the numbers start at 0(down throttle) and 100(Up full throttle)?! To retrace my steps, I started this whole process by creating a new Mode and then RESET ALL to stock setting. I then recalibrated to the Devo 7 Guides in the F210 3D manual. After setting these I then tried your setting and got the problems stated above. Also noticed a "THST" setting when advancing another step after setting throttle percentage -what percentage should that be at since it looks like its the same % for all throttle positions? Please help. Thanks. -DS
@PowerScissor
@PowerScissor 8 жыл бұрын
Do you have a regular F210 or F210 3D?
@井上謙-j1v
@井上謙-j1v 8 жыл бұрын
if it is a 3D, any idea how to setup? it seems i cannot get the POSITION part, instead it will give me a MODE. any help?
@davesilva9174
@davesilva9174 8 жыл бұрын
F210 3D. Same Devo 7 though.
@bobsheas
@bobsheas 8 жыл бұрын
I have the same issue. The d/r switch is not working. Did anyone figures this out?
@davesilva9174
@davesilva9174 8 жыл бұрын
ended up buying a DEVO 10. Much better range and reliability. Get one!
@madforit9661
@madforit9661 8 жыл бұрын
Please could you try and help Looking at manual it says setting up the osd on the devo 7 to go to system and then video I do not have video in the settings Only buzzer and about
@PowerScissor
@PowerScissor 8 жыл бұрын
Are you sure you have the correct manual. There are different variants of this TX like a "Devo 7e" for example.
@madforit9661
@madforit9661 8 жыл бұрын
yes
@PowerScissor
@PowerScissor 8 жыл бұрын
+spooner Graham I cannot find the section you're referring to in my manual...odd
@occ2812
@occ2812 8 жыл бұрын
How can I more speed (POWER) from Transmitter (SET) to do it more quickly, (THHLD-THCRV) ???? please
@PowerScissor
@PowerScissor 8 жыл бұрын
Emirete Angel Can you explain a little more? Not sure what you're asking.
@co1980
@co1980 7 жыл бұрын
how do u set a arm switch on the devo 7? so i can flick a switch so my props power up on my f210? plz help...
@PowerScissor
@PowerScissor 7 жыл бұрын
Conam Horton Are you using Betaflight? Do you mean to arm with a switch, or idle up with a switch.
@juleskoch
@juleskoch 5 жыл бұрын
Good video, although it is not complete. The video is missing step #7 as written down below: #1: make sure you work in a copy of the F210 model #2: go to function THCRV (enter) #3: leave SRVHD on Yes (enter) #4: set POSIT to POS 1 (DN) #5: set EXP to ON (DN) #6: set P-L to 5.0% (DN) #7: go down to SWITC POS 0 and press ENT. Then cycle down until you see D/R and make sure it is ACT. #8: Then set P1, P2, PM, P3, P4 and PH. As down below and make sure that before you enter the percentage that you set P1, P2 etc. to ACT. PL = 5% P1 = 12.5% P2 = 20% PM = 30% P3 = 50% P4 = 70% PH = 90%
@Six2226
@Six2226 7 жыл бұрын
quich question sir.... would this work on the 250 runner basic 3 ????
@Six2226
@Six2226 7 жыл бұрын
nevermind.... it worked !!! and Thank you sir !!! Now trying to figure out how to turn the pitch and yaw down a bit too , for smoother flying to get used to this. I race cars... so its like learning on motor HP , before throwing in a turbo kit !!!
@WolfUniqe
@WolfUniqe 8 жыл бұрын
nice this helped me a lot thx !
@PowerScissor
@PowerScissor 8 жыл бұрын
Glad it helped. The menu is so confusing at first.
@hakeemnz3316
@hakeemnz3316 7 жыл бұрын
how to make the spin more quick
@johnaughinbaugh7510
@johnaughinbaugh7510 6 жыл бұрын
dude thanks for the video but when it comes to confusing youve got the wealkera d7 beat by a long shot
@jeffro1005
@jeffro1005 7 жыл бұрын
Can you do a video on setting up so my rodeo 110 isn't so touchy. I guess it's called expo ?
@PowerScissor
@PowerScissor 7 жыл бұрын
Jeff Paige That is what this video explains. You are just manually adding expo by setting the points along the "expo" curve yourself.
@jeffro1005
@jeffro1005 7 жыл бұрын
PowerScissor I mean not just the throttle curve. The other controls like yaw etc
@PowerScissor
@PowerScissor 7 жыл бұрын
Jeff Paige Are you running stock firmware on the flight controller or have you flashed betaflight? You can change the rates for yaw/pitch/roll in the configurator easiest. Or if you fly angle mode you can adjust that there also.
@hakeemnz3316
@hakeemnz3316 7 жыл бұрын
can you do this at rodeo 110. please you are the only guy that i hope.please help me
@hakeemnz3316
@hakeemnz3316 7 жыл бұрын
please.. i need your help
@rexfarell
@rexfarell 8 жыл бұрын
Does it make it more controllable while in acro?
@senditfpv6538
@senditfpv6538 8 жыл бұрын
Eric Avila yes it does, also doing your d/r would help. Just to ease things down abit.
@mudpanther6079
@mudpanther6079 8 жыл бұрын
hello i have followed the video step by step triple checked everything and when i flip the switch nothig happens?
@PowerScissor
@PowerScissor 8 жыл бұрын
What happens with your FMD switch? I'm assuming you are referring to D/R toggle?
@mudpanther6079
@mudpanther6079 8 жыл бұрын
+PowerScissor yes the d/r switch as the video shows pal
@PowerScissor
@PowerScissor 8 жыл бұрын
What happens with your FMD switch in the "2" position...still nothing? I've seen a couple of times the setting were applied there instead of the D/R switch.
@mudpanther6079
@mudpanther6079 8 жыл бұрын
+PowerScissor is that the top right behind d/r switch i have tryed all the switchs after uve done the settings triple checked its activated
@bobsheas
@bobsheas 8 жыл бұрын
I have the same issue in that the d/r switch does nothing. Anyone figure out what we may have done wrong?
@R1carib
@R1carib 8 жыл бұрын
Thank you!!!!
@raialice5118
@raialice5118 7 жыл бұрын
oh my god , what a mess , flying with devo , i own the F215 and looking for a Smooth Flying setup tutorial , but better change to a frysky receiver and fly with my taranis x9d
@warrenwarren38
@warrenwarren38 5 жыл бұрын
Devo7 is the worst tx
Walkera Devo 7 Controller - Configuration Settings For Runner 250 Pro
9:52
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
The Secret To Perfect GPS Rescue
47:33
Dshot
Рет қаралды 42 М.
Build Your Own Drone Tracking Radar:  Part 1
20:08
Jon Kraft
Рет қаралды 614 М.
WalkeraDevo 7 Dual Rate setup,  Ladybug
13:37
Mike Russell
Рет қаралды 26 М.
How to Build a Fixed Wing Drone? | Electronics Basics
15:15
FLIGHTORY
Рет қаралды 20 М.
ATTEMPTING FAST FPV WITH THE WALKERA F210 3D RACE DRONE
3:04
Monkeypod FPV
Рет қаралды 6 М.
Walkera Runner 250 Quick Tip - Viewing settings with MultiWiiConf
12:23
Walkera Bind
8:04
Peter Hardy-Atkins
Рет қаралды 90 М.