Wall Desk Build Part one

Hello everyone, this is Part 1 of 2 of my wall desk build. I originally had this idea for an area under a bulkhead in my basement. My wife found a desk similar to what I wanted on Pottery barn. However, its price was far outside what we could afford. This is my take on the Logan Desk.
This project will require a lot of straight cuts and breaking down plywood to the sizes you need.
You will need 6 sheets of 3/4 Poplar Plywood
2 sheets of Birch for desk top
2.5 sheets of 1/2 inches sanded plywood.
(12) 1x2x8 (Pine, Poplar, Maple, Red oak.)
(2)1x6x8 (Pine, Poplar, Maple, Red Oak.)
(1)sheet of MDF
(7) 1x3x8 maple
Kreg Jig Tools:
Pocket hole jig
Shelf Jig
European hinge jig
Kreg Jig fine thread screws 1” 1/4
Wood Glue (I prefer Titebond original)
Kreg Jig pocket screws
1 quart Polyshades Ebony
1 quart Polyurethane gloss
1 gallon White paint
paint Brushes for oil and latex paints
(120, 180, 220, 400)grit sand paper
Hardware of your Choosing
8 European style hinges for inset door
4 sets of drawers slides at 20" dept
Hand planer
Orbital sander
(Preference)
Finish nailer
Brad Nailer
Stable gun
Pin nailer
2 1/2 inch hole saw
Circular saw
Miter saw
Table saw (optional)
Music is from
Two Steps from hell: Album
Pegasus 1: Vanquish
Impossible: Unleashed
Winterspell:Skyworld
Victory: Battlecry
Flight of the silverbird: Battlecry
Strength of a thousand men Instrumental core mix.
These songs can be found on iTunes.
Video clips from other channels
How to Build Stairs
This channel I’ve noticed had been harder and harder to find and they were instrumental in helping me with my build.