Wall e(Foldable, print-in-place) print on ender

Since Fab365 designed the Foldable Robot, there have been many requests to design the Wall-E in a foldable way. This is because Wall-E is optimized for foldable design. However, the shape optimized for foldable is only the body, and Wall-E's head/eyes, arms, wheels and track are a challenging shape with many factors to consider.
Now that we too have gained a lot of experience, we now have the skills to create, and finally we can design like this.
STL- fab365.net/ite...
Please enjoy the foldable design skills that Fab365 has accumulated over the past 3 years with the Foldable Wall-E.
This is Fan art and FREE
I printed on Ender 3, Ender 3 S1 to make sure any FDM 3D printer can print this design.
Here are some things to keep in mind when making Foldable Wall-E.
When folding the body, make sure to check the positions of the protrusions and holes before folding.
The parts attached to the upper corner of the Wall-E's body have a small adhesive area, so it is recommended to apply the adhesive carefully before sticking.
The neck must first be pushed up and then rotated before it can move.
The arm moves along the rail. On the lower rail, it moves well when the arm is forward, and on the upper rail, it moves well along the rail when raised up.
To make the track move well, it's a good idea to grease the wheels with sewing machine oil.
If the tracks are well separated, it is helpful to increase the flow rate.
Largest part in printing, size = X 160mm, Y 184mm, Z 25mm

[@Yuginkai12]

Still love it and the fact that the arms are also slidable, i could see this as an actual toy disney would make

[@cheesepoo7296]

they did

[@CAPTKMK2]

I just completed Wall-E, with PLA all came out as always the snap in parts are a little loose but the tracks worked first time it was pure luck through.

[@fab365_official]

Great~ Could you share on my review page please? fab365.net/reviews Thank you very much!

[@jorgel.martinez2648]

Downloading and printing. Love Wall-E . Thank you so much!

[@fab365_official]

You are welcome! Please enjoy~ 😁

[@T_McTag]

I am almost finished printing this Wall-E at 300%. interesting set of problems arise when it's bigger and you have to print in sections (220x220 build plate). So far it's working out OK.

[@fab365_official]

300% !!!!!! Wow~

[@commanderwolf_gaming5191]

Awesome again!

[@fab365_official]

Thanks a lot! Please enjoy~

[@victorgonzales9138]

Brilliant work!!

[@fab365_official]

Thanks for watching and comment!!! Please enjoy~

[@NickelLight]

Noooo this is making me want to get into 3d printing I have enough projects AHhHhhHh Still though, incredible work!

[@rcfourtyone1353]

Thats great,,,👍

[@fab365_official]

Thanks for watching. Please enjoy~

[@racythelander]

i dont know what i did wrong all the parts got filled in so the parts do not slide so i will have to cut it apart and asemble it that way and the wheels do not turn help im new

[@Dr.Evil_28]

Amayzing! Is there a way to make him so he can allso transform him in to a block ?

[@TheSirBlackbird]

Merci.

[@fab365_official]

You are welcome! Please enjoy~

[@deinema68yt62]

What's the best way to remove the support from inside the arm holes?

[@fab365_official]

Why did you use supports?

[@Le-Naka]

Nice model, I printed it already 3 times and I cannot get it to work. My printer looks perfectly tuned, but I cannot make it work. Eve on the other hand, works out flowless!!!

[@SPYROSTSABOURIS]

I know it's gonna be hard if not impossible to make it turn into a cube But I think it would be pretty easy to make it so the front opens

[@jlinder2420]

Any suggestions for the best print settings? (e.g. - layer height, etc.) I have sound some prints where you want them to fold or parts to move need to be printed with fine resolution to get results that work.

[@TamasJantyik]

There is more info on their webpage.

[@Francis-ST]

Somehow, its better that the official disney and pixar.

[@fab365_official]

Thank you very much!!! That is good comment for me~~~

[@theaverstijlen181]

Don't know what I am doing wrong but my legs, wheels keep falling out..

[@ehGai]

Any instructions on how to print?

[@makewithmegma]

💕👌👍

[@agusprayitno3235]

sir im so apreciate for this. i like this design and i say thankyou. i like this but sorry can u make character MO (cleaning service) because your skill look so amazing. thankyou so much sir

[@TamasJantyik]

I printed one but the tracks even after multiple reprints is just falling apart. Reprinted the last version from tpu and it works kinda okay-ish.

[@andybishop82]

what glue do you use?

[@fab365_official]

www.shop.fab365.net/loctite

[@NicksFilmsofficial]

I'd Like to know what settings to use I can't find information on what settings to use on the website

[@fab365_official]

The design of Fab365 aims to make printing seamlessly on any 3D printer. If your 3D printer can print things like 3D Bench in good quality, then there should be no problem with printing Fab365's designs in good quality.
Check out the video below to see how Fab365 designs products and tests them to print well on a variety of 3D printers. Fab365 design process video.- kzbin.info/www/bejne/rqjUZI1slLaFj5o Fab365 is providing Ender 3 Cura profile to customers who have purchased the paid design. Here's how to download Cura profile. fab365.net/help/43/how-to-download-slicer-setting However, as I said before, if your 3D printer is in good condition, there will be no problem in printing any design of Fab365. Thank you

[@carmelosuarezmoreno1469]

Exelente trabajo como todos los que hacéis, pero un pelín mas de información sobre parámetros recomendables para la impresión no estarían nada mal

[@MrTophatter]

i am doing this the instant i can get my hands on a 3d printer

[@nightbrand8016]

Only thing your missing is Kevin McLeod's "Dispersion Relation" playing in the background. Swivel here

[@Wallace19711]

I absolutely love this. So can you make Johnny 5 from Short Circuit?

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@GothicGlobe-hr5gw]

what are some setting for the ender 3 v2

[@fab365_official]

There are settings information on the page link that can be used as a reference for your print settings.

[@walvatrongomex6649]

Me encanta ❤, por cierto, qué altura tiene al final? (No lo entiendo muy bien en la pagina web)

[@lucianosilva6962]

exelente trabajo, que altura tiene en total ya armada la figura?

[@ma.christinagarcia6213]

Can you send me one Wall-E please :)

[@sami99351]

Plase make yamato

[@SebPlaySpaceflight]

12