Want a Ride? - My Electric Hummer Battery is MOUNTED!!

It is time to take our FIRST DRIVE in my Electric Hummer! Get your first month FREE with any Kiwico Subscription: www.kiwico.com/JerryRig This day has been in the works for a very long time. I started taking apart my Military Hummer January of 2021, and here we are taking it for a spin with its electric motors in February of 2022. A full year of hard work and learning later. Thank you for joining me on this adventure! Its been super fun and we have a lot more work to do! Should we add some Solar panels to the top?! I think so.
Grab your Whisper Project shirt (since its not a Hummer any more) here: www.jerryrigknife.com/
Huge thanks to Oshcut for the Laser and Tapping Machines: www.Oshcut.com
Watch all the EV Humvee build videos in order HERE: • Electric EV Humvee - T...
Anker is named as the Official Charging Partner of JerryRigEverything: ankerfast.club/JREpartnership
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
Replacement phone parts: www.fixez.com/?Jer...
The camera I used to film this video: amzn.to/2p7GtkX
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/AI2tmSb0onM9XPV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

[@LinusTechTips]

I like it - LS

[@mrnameyt1014]

Lol so less likes and no replies 😂

[@jali96]

How the heck does this comment barely have any reply

[@antonypeter2807]

Why I'm the third one here?🤔

[@MAV44]

Looks like nobody cares about Mr. Tips.

[@jali96]

@@MAV44 Mr. Ti*s

[@jclase]

11:09 - Zack: “I can almost feel the wind through my hair” 😂

[@billdoolinofficial]

Dude. Um deleting my comment. I have commented exactly your one. 😂 Same thinking.

[@giacomosmiderle9717]

lol I've just realized that he really said that

[@PavelCrisostomo]

Hahahaha love this guy

[@kysrussiansandindians0]

Hahaha this is so funny because he doesn't have hair and so I think it's a joke lol ääää

[@DragonOfTheMortalKombat]

LOL

[@PaulAdamsTheHandmadeFisherman]

it is exactly the sound the morning milk man's delivery float used to make when i was a child, they were electric and largely disappeared before the turn of the centaury in the uk

[@joshcoray3777]

As a guy who designs electrical things as the day job, the time you took to do each wire and connection right is what I love to see in the field. Excellent craftsmanship all around. You used the right tools and took the right time to do it right. I have really enjoyed this build and level of detail you put into it. Like you mention, 100s of hours per video.

[@tried2live]

Maybe it's already been mentioned somewhere or maybe someone else has made the comment, but I'd really suggest putting a driveshaft safety loop or two on the rear shaft. Any failure of a driveshaft component at speed and that shaft will start whipping around in the tunnel with enough energy to rip into those battery boxes pretty quickly.

[@WestonNey]

Yes super important advice

[@boostav]

Shouldn't have put one in in the first place.

[@drfranks1158]

I've mentioned this on every episode he drops. When that shaft lets go, his hummer is going to burn to the ground. I hope he is able to get out before it gets too hot.

[@user-bm9fo5kr1l]

Idk what that thing is but someone mentioned something in a about that a thin metal plate he used to attach driveshaft (?) or something to the body of humvee & they pointed out that metal plate can't possibly handle the torque produced by this. Are you guys talking about the same thing?

[@justabasslover4404]

you should copy paste this comment and comment it on his newly posted video very fast and early so that he can see this important suggestion that can save his hummer from burning.

[@marsgizmo]

This is such a cool and inspiring project! 👏😎

[@AxxLAfriku]

Do you have any idea who is replying to your comment right now? It's the FUNNIEST MAN ALIVE! Me funny (!!!) vids are so extremely funny, if you don't cry tears of laughter, you are allowed to thumb down me XTREMELY FUNNY vids! Do you think me funny (!!!) vids are funny, dear mars

[@MatthewNovoselskiy]

@@AxxLAfriku you are as cringe as Bella poarch

[@CheesyBigMac1]

simp

[@ratuldeoun7228]

A collab between yall two on a 3D project would be awesome!

[@marsgizmo]

@@ratuldeoun7228 hehe, that would be amazing ❤😌

[@yagineko]

The high pitched whine that they were talking about is the DC braking feature of the motor controller. It's applies a PWM signal to the windings of the motor to hold it in position when momentum, gravity, or some other force is causing it to move when you're telling the motor to stop. High frequency switching (PWM) makes noise because of efficiency losses (sound, heat, light, etc.).

[@florrieflorrie4577]

You dont get a high pitched whine from a tesla or bmw

[@yagineko]

@@florrieflorrie4577 I'm not sure what sort of methods Tesla or BMW employs for their motor controllers. They could be using regenerative braking. Depending on the gearing or noise dampening involved, this can be relatively quiet. The DC braking that I think was used here can also be quieter. When they close up the hole in the cabin that goes straight to the engine compartment it should dampen it. High frequencies don't penetrate walls as easily as low frequency.

[@KDlGG]

@@yagineko as far as I’m aware Tesla uses regenerative braking. I could’ve swore Elon talked about it a lot. Could be wrong tho

[@Drag0nmaster]

@@KDlGG It does, i'm assuming its just because there is no sound dampening as well as all the missing body panels lol

[@KDlGG]

@@Drag0nmaster yeah that thing even with sound dampening is gonna sound loud as hell. Not as loud as a diesel etc but still loud because he’s got balloon style 33s 35s so that makes it louder, then the wind noise and basically sheet metal panels that vibrate like crazy at higher speeds, it will be miserable for good drives

[@jimbuckman25]

Im impressed with all these different camera angles. You can tell he’s put a lot of thought into these videos

[@ThreeTwentyTech]

This series is *seriously* addicting

[@atreyanarya5049]

yes

[@leightonbiker7526]

Same

[@testaccount13200]

e

[@kix5457]

yes

[@SalvadorJV00001]

Tooo

[@SoldierKnowsBest]

I just replaced the batteries in my remote control and I feel like a champ. Hopefully the feeling for you getting this done is similar lol. All kidding aside, great job man and someone needs to sponsor you to bring this bad boy down to CES one year.

[@jesusislord6545]

Repent to Jesus Christ “Make every effort to live in peace with everyone and to be holy; without holiness no one will see the Lord.” ‭‭Hebrews‬ ‭12:14‬ ‭NIV‬‬ Ju

[@xiar5546]

It’s more terrifying to remove and recharge 6s lipos in a rc car. Those things have like no regulations and could go thermonuclear at any moment. Even just sitting on a shelf.

[@Soren0]

That would be great if someone could sponsor him, CES would be a great venue to show this off at.

[@sanu4u27]

Have been waiting for this day all along and here we are.. so amazing to see this finally come together on its feet(or wheels rather ).. the entire journey has been so absorbing and equally connecting to the viewers.. i'm sure many of us started clapping around on seeing it move for the first time.. Thank You Jerry for this series and making us all part of the experience.

[@muhammadansar1767]

Been watching this project since day one. The amount of hard work and dedication you put in this really paid off, i am more than happy for your success. Congrats!

[@TechWithBrett]

My brain hurts thinking about how you were able to put this massive puzzle together. I can't believe you finally were able to take it for a drive! Congratulations!

[@JerryRigEverything]

My brain hurts too. Luckily I was able to meet a lot of really smart people who helped alot along the way.

[@IvanITpro]

@@JerryRigEverything Like a little LEGO! ... One battery at-a-time! ... ;)

[@MrGreenAKAguci00]

@@JerryRigEverything I remember the feeling of the first test drive on a electric sk8board that I've build and customized. Your humvee is something else. I hope it will give you much more smiles per kWh than headaches.

[@pokineusz3501]

@@JerryRigEverything I can imagine the last episode of the technical series related to this EV with 20 minutes long credits at the end :D

[@Rhynri]

That high pitched noise is probably FOC - “Field Oriented Control”. It’s a method for controlling motors at slow speeds and many controllers switch it off at a steady state. Your motor controller probably has some configuration around this, you have a lot of inertia so once your moving you can probably shift over - experiment with the cutoff to get lowest noise / smoothest acceleration.

[@ScarletFlames1]

For something with the weight of a standard ICE hummer 20 kmph (16mph-ish) for the acceleration to switch to a higher speed. That's the maximum I'd say, could easily even go for half that. It's mostly a setting of "how fast are you going to go offroading to the point your motor can't push at standard settings?"

[@jesusislord6545]

Repent to Jesus Christ “Make every effort to live in peace with everyone and to be holy; without holiness no one will see the Lord.” ‭‭Hebrews‬ ‭12:14‬ ‭NIV‬‬ Jh

[@bluephreakr]

@@jesusislord6545 Sorry fam, I'm agnostic with what book I wipe my ass with. But I find bibles to be especially soft on my sensitive skin.

[@weskopr]

I am willing to bet, that it runs on Vector control (FOC) over the full range. The whine comes from motor coil resonance due to switching frequency. At low speeds the PWM signal is at low duty cycle, which creates a rather drastic change in magnetic flux in the coils, which in turn makes them vibrate.

[@anythingrc4715]

@@bluephreakr AHAHAHA needed to be said to these bible bashers

[@Georgiaguntraining]

Working, myself, on a relay setup for a rock crawler with 32 relays and fuses, I have been almost overwhelmed by the learning curve of rewiring the entire vehicle. This project blows me totally away, and really provides inspiration. Congratulations, you deserve all of the thrill of that first drive.

[@raktimroy9654]

Congratulations Jerry!! It is really amazing!! From the day it went to the present day, when it moves out of the garage on its own , has been a long, interesting and an awesome journey. Feels good that you made us a part of this. Keep it up!! Hoping to see more complex and fun projects from you in the future !!

[@marildogjolena1012]

25:15 This looks like an epic video game intro, so perfect ''it is time...'' *grabs you by your neck and lifts you up like a boss* ''...for a midnight drive'' 🤣🤣

[@ElectricSuperCar]

Thanks for letting me be part of the process! Such a cool project! 😎

[@vuxluongw]

super satisfying to see this project finally bears fruit. been waiting for this moment for about a year now. congrats Zack!

[@C01A60]

Congrats! What an achievement!! Did not miss any of your videos can’t wait to see it all ready with the full paint and all!

[@weskopr]

Generally, when you assemble high power electrical leads, it is good practice to mark the mounting hardware, so that you know it has been properly torqued and it hasn't moved. Loose joints can create cool fires 😁 Also that whine you hear is coil whine from the motor. You can try to change carrier frequency of the inverter to minimize it.

[@fixerdrew02]

This ^

[@MrE_]

Nice info

[@MrGTAfan93]

Actually a lose power cable would probably create a very hot fire, and that is something that you want to avoid! (plspeoplegetthejoke)

[@chaos3260]

@@MrGTAfan93 thats pretty cool

[@SilverCymbal]

I could have watched an entire video just watching the silicone come out as the box was screwed down!

[@lvill3633]

Feels great to see it finally moving, can't compare to what Jerry must've felt since it is his project ☺️

[@sscorpio71]

Congratulations! I have been with you since you brought the hummer home and with you as you got the hummer turned into EV! looking forwards to build progress.

[@LMSwarrior12]

Zack: *built an entire electric vehicle” Also Zack: “I am not a smart person” The humbleness 😂

[@rowannadon7668]

Fr lol

[@shravanganesh9429]

🤣lol

[@owiela]

Everyone who hasn't built an entire electric vehicle: "what does that make me?!" O.O

[@PistonAvatarGuy]

He built the HMMWV part of the vehicle?

[@taltigolt]

a series worth binging

[@yazanhamdan84]

It's been a fun ride, watching everything fall in place to finally being able to drive it was a treat. Well done!!

[@rickietatum4319]

It's great to see that the project so far is a huge success. We'll done Zach.

[@briansmobile1]

24:40 THAT was funny! I smiled a lot through this video- SO excited and happy for you! YOU DID IT!!! I knew you would, but I also knew what a huge undertaking this would be. Those shirts are deadly! I gotta get one!

[@JerryRigEverything]

Come grab one!

[@oraclemorah6138]

@@JerryRigEverything please do durability test of Huawei mate 40 pro and Huawei p50 pro

[@sminthian]

Yeah, I was confused there. I was pretty sure electric cars don't crank.....

[@mikes78]

I'm amazed Jerry has been able to put this much time into projects with a newborn. Mind you, it's not just a "this'll be cool", it IS a large part of their income stream. Me, I was chuffed that I built a 3 foot aquarium & wooden stand during my wife's pregnancy with our first, it was my "stay out of her way and let her rest" project.

[@raindrop2407]

As someone who's in the military that drives humvees in daily basis, it's so weird to see it drive so silently

[@azamshukri7741]

@@JM-oi9pk my god.. Seriously you compared the first try ever EV by a KZbinr with freaking Tesla ? Haha

[@leepicgaymer5464]

@@azamshukri7741 Tesla Owners will try to brag about anything.

[@Gmon750]

@@JM-oi9pk You're more than welcome to make your own electric Humvee and get it to run quieter as your Tesla. Until then, leave the room so the adults can talk.

[@derkchurk5879]

@@JM-oi9pk but unlike your tesla, it actually looks cool

[@heisenbergkierkegaard3982]

@@JM-oi9pk You just said it to brag about your Tesla 😂

[@nathangee9756]

I was smiling so big for you guys at this project. I have truly enjoyed watching these videos and look forward to more!

[@raycla1]

Hello Jerry ever since you started this project I have never missed your video update and I can surely say it’s been worth every minute you have put in thank u for educating us who are so much interested this project

[@godkeyx]

Zack: I am not a smart person Also Zack: *Proceeds to build a car*

[@jclase]

Also Zack: installed an elevator at home Also Zack: built an electric quad cycle

[@yagooatthegoat]

Zack is our first pick during a zombie apocalypse 💪🏾

[@G4UL]

@Godkey 3. He used all of his brains to build it

[@troll2637]

@@G4UL so did Einstein.

[@00kidney]

I'm loving every single episode of this series! And I really hope he can come up with another project once he's done with this one because I'm quite addicted right to this series right now and I can't believe it's almost over!

[@CheesyBigMac1]

simp

[@jamieroberts456]

Zack says "Life is a DIY Project." There's no doubt he's just getting started.

[@francoistombe]

In would like to see some Cambry in these episodes. Being a bit of a DIY dude myself (I built my house along with some other projects) I have followed Zach for some time. When Cambry came into the picture she added a nice colour to everything. I like the episodes where she appears as much as all the technical stuff.

[@wldgeo3881]

me too am waiting for another project after this, all the way from Kenya 🇰🇪

[@nealthomson9505]

Yeah. I agree. . . Maybe a project thats an extension of this one. Like a sport or camping trailer that goes with the Hummer. That way we get to paint it with matching colours. . . TGC Blessings:)

[@ChiChi-dy9qi]

Congratulations Zak, you're a bloody genius! Well done, I can't wait to see it go off road 🙂

[@marioptcardoso8465]

Jerry, congratulations. Even I felt super excited when you took the first ride!!!!

[@contentment5325]

I am seriously impressed. To go from being generally good at tech and mechanics to actually putting together such a complex piece of hardware as an EV, thats a feat for sure. Kudos to you Jerry.

[@VitaKet]

Not to downplay what he's done here but he's had a ton of help.

[@onetakewonder1999]

his name is actually zach but that doesnt matter

[@Omri.Collects]

@@VitaKet Not to downplay your comment and it’s blatant passive aggressive tone but, help or no help, Zach has done a tremendous job building his EV.

[@DaxtonAnderson]

Those LTT zipties being used is absolutely hilarious 😂 I made a DIY eBike (72v/2500w) and used them for cable management on the bike too 😂

[@rafita3399]

Yeaaaaaaaaaaaaaaaaaaaaaaa!!!!!!! So happy to see that hummer rolling.thank you for all the hours and videos of the process.

[@shekharthedr]

So happy to see it’s moving. Nor missed a video about this ride which will ride.

[@adamgentry332]

You should probably install a steel hoop around that drive shaft to keep it from smacking the center battery box. If a universal joint breaks it could get ugly

[@scellyyt]

I believe the reason the motor makes that high pitched sound when it starts from a stop is the ESC in a special high torque mode that pushes more current to the motor, similar to the sound hybrid cars make when they start rolling. It's sort of like a first gear.

[@DavidBezemer]

It's a Pulse Width Modulation (PWM) noise, most likely from the inverter.

[@scellyyt]

@@DavidBezemer pretty sure yeah, although I couldn't hear the sound change from the changing duty cycle

[@gregholloway2656]

@@DavidBezemer indeed it is. It may be possible to increase the pwm switching frequency in the inverter, to push the noise out of human hearing. This is certainly possible with commercial VFDs.

[@GardenGuy1943]

Wrong, it’s the alternator, needs new oil

[@TherapyWithWind]

@@GardenGuy1943 hmmm....I was leaning toward the muffler bearings.

[@Devon_Bastiansz]

Can feel the happiness in Jerry's voice when he's driving it Congrats man 💯💯💯

[@TanveerKhan-wt9hj]

its really awesome, waiting for 6 months just to see this baby move. congratulations jerry. its a great success lots of love 💖

[@mmikels]

When it first came out of the garage on its own power, I screamed of excitement! And I'm not even part of the build. Haha! What you did is super cool stuff! Congrats!

[@Lizlodude]

That 3 AM test drive of a project never gets old lol. Also, that whine sounds like the PWM frequency of the speed controller/inverter, it might be switching drive modes at different speeds? Should be able to be tuned out with some settings. From my experience ESCs tend to do that when they're running in sensorless mode. I assume that motor has an encoder but it may need some configuring.

[@jovelcjose]

Amazing Jerry, been following ur build from the beginning, the way it's been evolved, is amazing, kudos to your dedication!

[@thamer93]

I binged watch this whole series today, really enjoyed it & learnt loads, congratulations on yr first drive

[@DillandShaj]

Man I'm so happy for you! I work as an electrical designer for an EV company its amazing to see that the information is available for anyone in the world to give this a try if need be! Amazing job again and Im looking forward to seeing how much further you take it!

[@nazrojean7128]

THIS by far is the most satisfying episode of the whole journey so far!the intricacies of assembling each of the batteries into place n loading em up into the humvee....super satisfying!the thrill n suspense when u got it rolling surpasses my excitement for all the Jurassic Park movies dino scenes...i really feel like been part of the project,so yeah-i'm grabbing the Whisper Tees for sure!

[@AlvieeG]

Glad i never missed these episodes in the series....thank you so much!

[@grumpyolemann]

Bravo, there was never a doubt, you can JerryRig anything.

[@hanssenjones]

This is the kind of project every man talks about doing one day and never gets around to doing it. Absolutely awesome! Cant wait for the next video!

[@SL_G]

Am I the only one who was so hungry to see these wheels spinning on road. Loved the video Jerry❣. Learnt a lot from this Electric Hummer Series 💯✊🏻

[@justinbeard4733]

That is legitimately one of the most cool things I've seen in quite some time. glad I've been along for the ride.

[@ssinghvi]

Fantastic work. Truly enjoyed the series so far. Congratulations on this major milestone!

[@MunroLive]

Looking forward to seeing this Hummer in person.

[@roshanbhandari1668]

Wow.. Munro my man himself.

[@EricP36]

The Teardown Titan himself!!! 🔥🔥🔥

[@maxounette-jv7dj]

I'm sure for him it will be like having a visit from Jesus in person.

[@LaowaiDaveJCP]

😮

[@curtisbme]

Oh man... You better reduce the amount of screws and other connection points in there before Sandy sees it.

[@applesushi]

I found myself grinning from ear to ear when you all drove through the parking lot. What an undertaking. This is the best build series on KZbin right now.

[@bonganipeter9433]

I'm impressed by the determination and consistency 👏👏Well done guys!!

[@mitchellwright549]

That's awesome!!! I can imagine how satisfying that must feel. Congratulations 🎉🎉🎉

[@Ma77riK]

Being a mechanic who operates a family business I'm really excited by the future of electrification, alot of people assume I'm against it because keeping liquid drinking jalopies on the road is a major part of my lively hood, it's exactly the opposite, I would gladly trade dropping compact electric motors into vehicles instead of piston pumping greaseballs 😂

[@man_imbored171]

Yeah but they're becoming more and more hard to repair

[@Ma77riK]

@@man_imbored171 regular cars are definitely alot harder to repair these days, many more moving parts that have individual sensors for each component, electric motors having a single moving part is definitely a plus

[@Xephrey]

Honestly, each one of these videos, for me, is the most highly anticipated thing on KZbin. The sense of satisfaction and fulfillment Jerry must feel all throughout this process can’t possibly be overstated. And really, imagine once this whole thing is buttoned up and fully functional; what can he not do then?

[@col68p]

Great to see it finally moving. We’ll done guys and thanks for the great videos

[@raphaeltoast]

It's truly amazing that you did all this in a year. Great work.

[@LincolnBerryIII]

Congratulations to Zack and his channel: Hands-down, this is the BEST content on KZbin in 2022!

[@drakegarcia3106]

I think that this humvee build series deserves an award or some sort of recognition. Alot of effort were put into this. Also, will this be street legal once finished?

[@nuur2825]

It should be there's nothing here that would make it not street legal.

[@christianrichert5197]

I was wondering that, too. But then again, it's the US, so if it rolls n breaks, it's probably street-legal :-D I know in Germany it's very difficult to get a license plate for any kind of EV conversion as you have to get it examined by an official authority, which is quite expensive. And if you fail the examination, you have to fix the issues and redo the process, until you pass everything. It can end up costing many thousands of euros just to get a permit to run on public roads... And if you are not an expert in what you are doing it will be very difficult to build an EV up to code in the first place. Every wire, fastener, connector, mount, etc is tested and has to be up to code in its own right. It's not an easy process. It's all in the name of safety though, and I think it's ok. Sucks that you can't easily convert your own car. But prevents unsafe cars to be on the road. So overall, I am not too mad about it.

[@desertedpyro3238]

SWEET so glad to see this coming together, i think this is so awesome.

[@steventheriot3901]

You should put a couple driveshaft loops on it to prevent damage to the center box if you were to ever have a u joint failure. Hate to see it burn to the ground due to a battery venting. Great work! Love the series!

[@grantandre79]

This was one of the most satisfying videos to watch in this series, yet!.. and not just because of the major milestone but also for all the detail in how those battery boxes are constructed. Impressive. Congrats!

[@aldencrabb713]

The most unique beefy and technically well thought out electrified conversion ever seen on KZbin! I take my hat off to your ingenuity and forward thinking throughout this epic build! 😃👍

[@333krook]

Love this series so much. I’m very interested to know what the final front/rear weight balance will be! And how it roughly compares to the original balance. Keep it up Zach!!!

[@rashadfoux6927]

It's a joy to see your joy on this project man. Good job!

[@akira939]

It's amazing seeing how different everything is since it started, I love this series

[@SplitSniper7]

This is incredible. I can't believe you've gotten this far into building the EV and I cannot WAIT for the final results!

[@StGeoRUSH619]

OMG, Bro... that is F#@K!NG Amazing !!! Congratulations on a successful test run !!! It's Alive... IT'S ALIVE !!! So very cool, and very happy for you, Jerry.

[@NickMuzzio]

Congrats! Must feel awesome to complete such a task. Thanks for sharing!

[@fuckmesideways1328]

Literally was smiling all the way through, I'm so happy to see the fruit of your labor finally come to fruition! Bravo!

[@PhrozenCPU]

Out of everything that is just plain amazingly awesome and high-tech, what I love most is how clean everything is on fitment and presentation. It is a piece of art, like each piece was specifically designed for this one purpose. Amazing job Zack!

[@Tolstiy83]

So awesome to see it finally come together. Great Job!

[@GeoDelGonzo]

Right on, right on, right on!! 👍 sounds like the gear box takes a while to lubricate itself, but after a few minutes, the oil is thoroughly flowing.

[@maanvir_singh]

I'm not even driving it but still it makes me crazy happy to see this project come along such a long way...I've been waiting for this day since the first video was uploaded and got me crazy excited about how a converted HUMMER EV would really be like. I've followed this project more than any show that exists and honestly I really got addicted to this series like I've watched each and every video in literally less than an hour every time they were uploaded....Congratulations to Zack his family and the whole team that's been working really hard on this project. Would love to see the HUMMER EV in SEMA 2022. Much Love ❤

[@vaibhavsharma5071]

11:12 Zack: “I can almost feel the wind through my hair” 🤣

[@andrewgourd8486]

Can't like the video enough! Thanks for making these videos. Really fun to watch.

[@hardcorepooka104]

It's great to see this moving under it's own power!! Can't wait to see more!

[@juanromanlopez4959]

Seeing Zack happy with his Hummer is the most Wholesome thing on the web, Congratulations!

[@WilfredZweverink]

Man, it all coming together is so great, it's been a joy watching this, and it was making it, you can tell. Your best project so far, and one of the most impressive YT series of the past decade. You rock Zach...

[@callmeslack]

O man, I’m so buzzing just watching it get out of the garage. You’ve done some amazing work, It’s came so far!! Keep it up :)

[@westandforpeace777]

I'm very happy for you. You deserve this and even more!

[@stephentroyer3831]

It is great to see a DIY project where you're taking safety very seriously. I like how you have insulated everything that needs it, and then went ahead and added more insulation where it may possibly be needed. Awesome.

[@roselinefuret8465]

at 22:12 Zach says bokas. You can tell he is exited lol

[@DiegoLeoratto]

Top project Jerry, I was anxious for your first drive in the EV HMMV. So cool! Greetings from Brazil.

[@benjamind7290]

Amazing! Congratulations. Such a slick build. I am crossing my fingers and toes for you but seriously it is looking so good.

[@jishan6992]

Words can't explain how much I love this series, I have been waiting for every new video like it's a TV show This might just be the most important project on KZbin.

[@realsecrets1]

you might wanna watch 'Rebuild Rescue' rebuilding an abandoned airplane

[@haydensalles]

Congrats man! What a year this is going to be 🎉

[@phantomxx1000]

Idk if it's just me but as watching this I felt so chill like just to the point I almost fell asleep all the sounds of drilling and tapping etc.. and Zack's voice is so calming to top it off. The only thing that kept me awake is how cool the build is and how it's going.

[@johngee9018]

So Exciting! Congratulations! Looking forward to some off-road testing in the future.

[@alsahhim3576]

At long last. I've enjoyed being on this journey with you Jerry!

[@joshuamcdonald5621]

LETS GOOO!!!

[@WesleySloss08]

LETS GOOO!!

[@johnnyrocket6588]

LETS GOOO!!!

[@auricdasgupta7536]

Great work Jerry. A big fan of urs, never missed ur videos especially ur EV project

[@Alfredomakanas..0923]

You're awesome Jerry, thank you for your service..👌🏽👍🏽💪🏽