Want to HACK with a FLIPPER ZERO? || MEGA GUIDE

[@MajorMusa]

tbh this is one of the easiest to follow guides on the flipper. You should make some vids on firmware im sure people would eat that up

[@rithimstuff]

Thank you for the compliment! That was my goal with the video. I’ll be making more videos!

[@rossnaman]

Couldn’t agree with you more. Great tutorial, I’ve watch hundreds of videos on the Flippy 🤣 this one was perfect. Thanks a bunch. 🙌🍻

[@willwilliams8495]

by far the easiest beginners guide out here. i got my flipper zero a couple weeks ago and have been looking at videos since...this is the first one i came across that broke every step down in an easy to understand, step by step guide on everything i needed to know to setup and get running. ill deff be checking out your other vids fam!!! GL and keep it up!

[@rithimstuff]

Thanks for watching man; I’m glad I could help.

[@corycrawford4524]

Well, I'm glad I had a few 6-8 year old SD cards laying around and that they have given them new!

[@vibrantjames1752]

Just ordered my Flipper... Cant wait to learn more with you!

[@rithimstuff]

Awesome! You’ll love the Flipper!

[@Rift-nox]

same

[@danroberts2055]

Just got mine today and followed this video. Would love to see more on how to use the thing and apps etc.

[@rithimstuff]

Check out some of my other videos! I’ll make some more soon as well. And thanks for watching!

[@burstzgmail]

Your lesson consist of detail, pace of teaching is appropriate and your voice is so calm and peaceful. Thank you for this video.

[@rithimstuff]

I’m glad I could help! Thanks for watching.

[@ericberger4511]

I had a bit of an issue with the final firmware update step. Now i know how to reboot my flipper :)

[@101helio]

So far I have to say if you do videos like this explaining detail step by step helps a lot and the process was fast and easy and thank you I'll look forward for the next videos on the flipper by you I just subscribe to your channel

[@rithimstuff]

Thanks for watching!

[@Ghazibaba6824]

I loved the explanations. So calm and step by step . Well done mate

[@rithimstuff]

Thanks for watching!

[@youngchurchboi2597]

just got 1 today...much thx for the video, really helped me out :D

[@VenFlyte]

Dayum good one! I liked all comments and copied the link to share. Hopefully it helps with the algorithm!

[@rithimstuff]

Thanks for watching!

[@Colzun]

The music is delicious, thanks for the video.

[@rithimstuff]

Jazz makes everything much, much better, indeed.

[@HEREisTRACYY]

Have a flipper watch all kinds of supposely top notch ppl but they dont get down to detail like u do..sad that all that sponsor and cant show u much..now wit this video i just downloaded unleash firmware and i feel like i can do anything...lol flip the world wit the flipper....thanks...

[@rithimstuff]

Thank you so much! I’m glad I could help.

[@HEREisTRACYY]

@@rithimstuff have other questions can I used w different SD card running diff software on 2 flipper or can't work..notice my phone app wont bt connect after I downloaded unleash and even Chang the desktop name..any hints on what an idiot I am n what can n cant do .

[@MrMilarepa108]

I'd give you a sub for your excellent taste in music and visuals, but your explanations are also very good.

[@rithimstuff]

Thank you for your kind words. And as always, thanks for watching!

[@PaoloPabz]

what a great video... the jazz music in the bg was killer bro

[@rithimstuff]

Thanks man, glad you enjoyed it.

[@clankmon]

I just found your channel. Great tutorial. Enjoying the background music as well.Easy subscribe from me.

[@Ndevil11]

Dude you are going to grow so fast, this was the best most detailed tutorial and you have like 1k subscribers. KEEP IT UP 👏

[@rithimstuff]

Thank you so much man, and thanks for watching!

[@saulramirez7329]

Thank you sir! You are an excellent teacher! Hope to see more of your content soon!!!!

[@rithimstuff]

I appreciate that!

[@iyeetsecurity922]

*Which button crashes the CIA?*

[@rectones128]

Excellent video! Subscribed immediately.

[@rithimstuff]

Awesome! Thanks for watching!

[@HVAC_Tips_Tricks_Calcs]

Awesome video/information! If I could make one recommendation, ditch the background music. It competes with your voice.

[@rithimstuff]

Thank you for your insight, and thanks for watching! Maybe I’ll try that out.

[@xrpslinger662]

I appreciate your content. Thank you and keep doing what you're doing. You do explain things alot easier than others. Looking forward to more videos. I can’t seem to see your email anywhere.

[@rithimstuff]

Thanks, I appreciate that. I realize my email is not listed. You can reach me on my business email: [e-mail]

[@jannesvandenboogaert6689]

You got my like, exactly the 1000th

[@lucypurr666]

Thanks very much, great guide!

[@rithimstuff]

Thank you for watching!

[@talharaihan978]

Release candidates means its version which is passed the dev version and it's released for user acceptance. If it'll work fine then it'll be released. So the release candidate version is more stable than the development version.

[@rithimstuff]

Correct ☑️

[@kianalb2702]

Amazing video, very helpful and easy, keep it up

[@rithimstuff]

Thank you for watching! Glad I could help.

[@luis.palomo]

Do I get to keep the original flipper animations when I download roguemaster? Like the ones of the doplhin doing random stuf on the rest screen? Subscribed! :)

[@rithimstuff]

Yes indeed. In my newest video, I show you how get new animations and to restore the old ones. Also, roguemaster has the same animations, just slightly changed. Thanks for subscribing and watching!

[@ezblizzy]

Make a video showing what the new firmware can do

[@saulluas1866]

Hi, thank you for your lesson. I have have a question, is there a reason why a flipper zero wouldn’t read a key tag/fob?

[@kelscornershop]

best guide so far good shit

[@Alexisz998]

Hey, really liked this easy to follow guide by the way. I didn't really get what the rogue firmware add, is it simply to change the menu and the animations ?

[@rithimstuff]

No, it removes all of the limits on the flipper. It also adds tons of new apps and other things. It basically makes your flipper 10x more capable. Thanks for watching.

[@Alexisz998]

Okay, I will make sure to upgrade it then. Thanks @@rithimstuff !

[@UfukKay]

27 now :) Need more video and examples in real what can you do with the flipper. I have Wi-Fi Modul too but my be connected… I used deauth..

[@rithimstuff]

I’ll be making more videos soon 👍

[@UfukKay]

@@rithimstuff Great 👍 maybe with Infrared or subghz outside

[@UfukKay]

@@rithimstuff in your Video we have in vehicles folder just Honda, Mazda, …. Codes How can o find codes for my old cars Volkswagen and kia/Audi ?

[@rithimstuff]

@@UfukKay That is relatively impossible, as that would require an extremely specific and advanced understanding of the inner workings and codes with those cars, as the only ones easily openable are included in the UberGuidoz files. Unless the cars you want to unlock are old, they are not possible.

[@beepboop-o5s]

definitely posible@@rithimstuff

[@jsl9289]

More flipper vids big dawg!

[@j0hnc0nn0r-sec]

Mega guide - proceeds to show you how to setup

[@rithimstuff]

Yeah, hence the term Mega Guide… that was the point of the video sir.👍 By the way, I appreciate you taking the time to write this comment, it means a lot!

[@GARYTF2]

DO you have another tutorial on how to pentest and use and of these tools? Im starting to pentest here at work, btw our systems flagged me when I was moving all those files on to this loll

[@rithimstuff]

No I do not have a pen-testing video out yet. I hope to possibly make one soon. I currently have a new video in the works that should be coming out soon. Thanks for watching!

[@rafitheboss1784]

Is this basically like the talking Sasquatch video

[@rithimstuff]

Talking Sasquatch is great! I’m just trying to give more information than the rest of the creators out there. My videos are basically just better edited versions with more information. So you can watch a video from another creator and still be left with questions, or you can watch a video or a video series from me and have every possible question answered very quickly. And I’ll be going into depth on topics like this, but also other topics as well. Thanks for watching!

[@rafitheboss1784]

@@rithimstuff ok that’s great

[@c2c001]

What exactly is the difference between Xtreme and RM? Can someone give me an entailed answer?

[@ciprog.456]

thank u

[@rithimstuff]

Thanks for watching!

[@nibbinoodle05]

very good guide thank you :)

[@Storytankos]

I cant buy the flipper on the real flipper site but can i buy it on amazon and is it the same? iwant to flash my flipper but im not sure if its possible with the version from amazon do you know somethign there?

[@rithimstuff]

Well, there is only one version of the flipper zero out there. So if you are buying a real one flashing is not a problem. However, Amazon cut all sales of the flipper zero not too long ago, so the one you are looking at is most likely fake. I recommend buying used, or Walmart actually has some sellers that have the flipper. (In small quantities though.)

[@golfinglife610]

Order now bro just bought another one and it arrived in 4 day's

[@edwardcruz9200]

Hey I was wondering I did everything right but when I install from file on flipper zero app and It says it needs an update so I updated then it just takes it back to normal instead of it being with a bunch of new stuff

[@rithimstuff]

DO NOT under any circumstances click that update button unless you want to go back to the default firmware. Go through the same process again of installing the new custom firmware. Thanks for watching!

[@edwardcruz9200]

@@rithimstuff hey sorry to keep bothering but I keep trying to reinstall it and when I do I don’t update it anymore but when I try to use the flipper it says update firmware to run this app for basically everything

[@rithimstuff]

@@edwardcruz9200 It only says to update because it means to update the stock firmware. Disregard it entirely unless you want stock firmware. If you need help again after this, send me your discord.

[@Kalinux_ai]

keep doing videos man

[@rithimstuff]

Will do!

[@DogWorkingHere]

I'm at the point of installing the RogueMaster firmware and it gets to "Setting up region data" and has hung there for over an hour. Here's the actual error: [UTL] Region Provisioning @Ramaput START [RPC] (2) Gui Start VirtualDisplay ERROR: Operation timeout (generic) I've installed firmware on other devices and I know I could brick this thing if I just reboot it. Any ideas?

[@rithimstuff]

Is the error on the flipper or the qFlipper software??

[@egorzu]

18:29 wth was that jumpscare man?

[@christianwolfgang943]

I do not see the flipper zero sd on the desktop, did I miss something? was this the partition?

[@occulticlol7015]

did you say you have a SDXC card and you formatted it?, how do you do that?

[@rithimstuff]

I apologize, but there is sadly no specific answer to this. I have had many instances in which it worked with sdxc and many instances that didn’t. I have a special program that helps with the sdxc transition. But I cannot share that information with you. Thanks for watching!

[@PROTUNER]

Which would you recommend? 32gb, 64gb or 128gb??

[@rithimstuff]

Hello! Personally, I think a 32gb card is great! Make sure you are getting the right type though, as stated in my video. Thanks for watching!

[@PROTUNER]

@@rithimstuff SanDisk Ultra MicroSDHC C10 A1 UHS-I 32GB

[@JayskiiG19]

Doesnt really matter what sd card i use thoigh does it?

[@rithimstuff]

It does indeed matter, as every sd may produce different results. Those maybe being good, or possibly bad. It’s up to you to experiment and in turn find what works best in your certain circumstance. However, I will say that SanDisk SDHCs tend to produce results that are quite good. But once again, there are multiple options. Thank you for watching, and happy holidays.

[@dutchbachelor]

Nicely done video!

[@rithimstuff]

Thank you very much!

[@r3miix]

18:35 what do you mean XFW has hidden pictures? like malicious ?

[@rithimstuff]

They are 18+ pictures, that I personally do not want on my flipper zero.

[@alexandre_1a442]

At 4:01 , why we can’t have linux computers ?

[@rithimstuff]

I don’t see why not. If Linux is your thing, then embrace as best you can haha. The tutorial is easiest to follow with Windows, as that’s what I made it for. But anything works. 👍

[@alexandre_1a442]

@@rithimstuff I know, I said that for fun but it's true that Linux is not very popular so it's common to forget to talk about it

[@sumone665]

you said it has amibo files where do i access those?

[@rithimstuff]

Hello, thanks for watching. In order to access the amiibo files, you have to go through the nfc app, and then select Saved. Right at the top should be the Amiibo folder. (This is only if you are using RogueMaster)

[@asimfaizlabib1959]

Flipper Zero doesn't deliver to Bangladesh 😭

[@rithimstuff]

That’s not fair! I’m sure there is a way.

[@0tez_]

do i need to buy a USB converter, for a desktop, cause i cant find a port for a microsd

[@rithimstuff]

Yes indeed you do. You can find one for under $15 on Amazon.

[@christianwolfgang943]

sweet i got goku in there now!

[@VenFlyte]

I also want Goku!

[@michael2m000]

I would like to keep my old dolphin animations, Can I change it back to that?

[@rithimstuff]

Yes, you need to copy them from the original flipper firmware. Which can be found on GitHub. I’ll be making a new video on that soon. Thanks for watching!

[@family11m]

when I try and use the Github desktop, it says Permission denied.

[@rithimstuff]

I would absolutely help with this situation you are facing. If you could, provide me your discord username and I’ll message you privately on this matter. Thanks for watching!

[@1mpulse182]

u got a sub bro

[@adilson7577]

this files works on the unleashed firm?

[@Purrfectcat100]

I am taking to get a flipper but the only problem is I don't have a computer so will I be able to do all of this with a Android

[@rithimstuff]

Yes! It is very possible, just quite difficult. I personally have not done that before but I’m sure there must be a video out there somewhere! Thanks for watching!

[@MatteBlk300C5.7]

can any of this stuff your going over, be done with the flipper app / I tried to use my mac, and it said i need to update. But i dont want to update bcuz i can only use cura with my 3D printer, with 10.14

[@rithimstuff]

If you connect via Bluetooth to your mobile device, yes you can use the flipper app. However, it’s very hard to do everything you see in the video. So overall I’d say no, but I guess it could be possible. I’ll try and make a video on it soon. Thanks for watching!

[@MatteBlk300C5.7]

@@rithimstuff ok thanks. I did that already. But when i try to deauther. It doesnt work. So i wondered if i updated my computer, and updated so i could download qflipper. Can i go back and update to 10.13 0r 14, so i can use cura for my ender 3 V2 ? i only found 1 video on youtube, on the steps to take, to deauther with flipper. Can u recommend a video? Do u have a video on it?

[@rithimstuff]

@@MatteBlk300C5.7 I haven’t necessarily considered making a video on that quite yet. But I could possibly. I don’t deal with internet related hacking, but I could recommend Talking Sasquatch’s video. I don’t know what it is called, but he deals with that stuff all the time.

[@EllarMarine]

Do Micro SD HC go higher than 32gb?

[@rithimstuff]

Sadly no. I have in the past tried using SDXC (which goes above 32gb) and it has worked a couple of times. I just get the most success using SDHC. You’re free to try whatever you want; because who knows, it might work!

[@EllarMarine]

Ok thank you. I tried looking up higher ones on amazon but I still couldn't find any, but thank you anyway!

[@TheBuckBratager]

@@rithimstuff - Question: Is the issue that SDXC cards typically use exFAT, whereas SDHC use FAT32? I know that's an issue with a lot of linux-based handheld gaming emulators (which I am aware the Flipper is not one of). A person CAN reformat SDXC to FAT32 using software that isn't packaged with Windows, which would allow for a larger storage capacity. I have a couple larger cards lying around that I'll experiment with, but if you haven't tried reformatting your microSDs to FAT32, I'd love to hear how that changes things for cards that did NOT work for you, initially.

[@rithimstuff]

@@TheBuckBratager I am aware of that possible reasoning for the failures, and I have tried it myself using the 3rd party software shown in the video. I have also seen this issue with handhelds, and I have used the method you mentioned with them as well. From my tests, I’d say it works 50% of the time. In the end I have determined with research that it is more worth it just to use the old SDHC cards, and just suck up the fact that it has less storage in the end. But who needs more than 32gb anyway with the Flipper? I’d say the max you need is around 10-15. Thank you for your question, and I appreciate you watching the video! (P.S. I will continue to try other methods, and I am planning a video on it for the future.)

[@almaoX]

great vid thanks.

[@rithimstuff]

Glad you enjoyed it

[@808DC2R]

What brand should I use for the micro sd card?

[@rithimstuff]

Hello, and thanks for watching! As I said in the video, you want a cheaper card in general. So I recommend a basic PNY SDHC MicroSD, or SP, or even Lexar. I wouldn’t go for any better than that. Once again just like I stated in the video. Thanks again!

[@Wdahit]

Why do you have to install all the files before the custom firmware?

[@eetgribtek382]

why is unleshed not better?

[@rithimstuff]

It’s just my personal preference. Roguemaster is built on unleashed, but it just has tons of unstable features. I just like that better.

[@eldean0]

What is a playlist? I see you skipped over those on the install files ?

[@rithimstuff]

I am not quite sure what you are talking about. Could you explain yourself better? Thanks for watching!

[@eldean0]

@@rithimstuff sorry it was late lol.. I’m curious as to what the playlist files are for? In the repo

[@rithimstuff]

@@eldean0 When using a playlist in the flipper, it will go through many different frequencies to try to activate or deactivate something. It really depends on what your are trying to do.

[@ابراهيم-ح8ع]

i dont have the flipper SD(F) file that u have... is that a problem?

[@thatassassinguy]

Will this BadUSB work if I'm using the Unleashed firmware.

[@ROFLance]

Your voice sounds just like Styropyro

[@rithimstuff]

Haha, I suppose so!

[@auntiestonks3806]

Nice vid

[@jakek1132]

My sub GHz files don’t work after one try it says the region is blocked how do I get passed this

[@Minkooovv]

how do i plug the SD card into the computer

[@EastCoastCamping]

Quick question . How come on some of the commands the file folder shows “empty” majority of what I downloaded shows empty everything copied over correctly , is the file just empty ? Also I followed your video to the T did everything , when I install the rmtgz qfliller says rbc failed , but the weird thing is on the flipper itself it says success after it finished , but on qflipper it says rbc failed and never complets the update . And the sub ghz folders like ceiling fan that say Hampton bay gas signs all are empty . What happened

[@rithimstuff]

Hello. I wish I could help you, however I can’t seem to understand what you are asking. Could you possibly reword your question? And maybe ask one at a time? Thank you for watching.

[@amelifehacks]

Clone always fails :/

[@andyb7754]

Thank you for the information. I'll have to watch it a few more times because it put me to sleep! LOL! The music is too loud and annoying, just FYI.

[@connerfrost7441]

Get some vbuck

[@VenFlyte]

Robux bruh

[@Scumfukc]

Do a video on esp 32 i cant seem to flash mine