Warhammer 40K Space Marine 2- RTX 3060 | DLSS/LSFG Frame Gen | 1080P ULTRA/OPTIMIZED Settings Tested

[@Augmented_Realism]

MOD Installation for NVIDIA and AMD cards: Step 1: Set the Display Mode as Borderless screen otherwise LSFG won't work and gives the blackscreen/freezing issues in Fullscreen mode.. Step 2: Download the Lossless Scaling v2.11 App from the link below (It supports now LSFG 2.3 with up to 4X Mode): FG Mod Link: pixeldrain.com/u/2pozaqWm Step 3: Apply the ''Registry fix'' first then ''Run the Lossless Scaling app'' Step 4: Set LSFG to 3X Mod and disable the Upscaler as OFF in the Lossless Scaling APP for the RTX 3060 or higher level cards but you can use also use that section as LS1/NIS or FSR if you have a weaker GPU. ------------------------------------------------------------------------------------------------------------------------------------------------------------------- (NOTE: 3X and 4X Modes also runs fine and much smoother if you already getting 60 FPS or higher as Base FPS without FG) ------------------------------------------------------------------------------------------------------------------------------------------------------------------- (NOTE 2: Don't forget that 3X and 4X Modes costs around %10 to %15 Native FPS loss to interpolate the new generated silky smooth frame-rates to target your monitor's maximum refresh rate, similar for 2X Mode but FPS impact that not high for the other modes so it's suggested to use those options if you have already more than Native 60FPS and targeting mainly 144/165/180/240Hz displays) ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Step 5: ''SCALE'' hotkey is automatically set to ''CTRL+ALT+S'' but you can change it to which key combination suits you.. Step 6: Keep it open and press the hotkey in game, FPS boost would be crazy and boosted frames are totally real, not the fake ones.. ----------------------------------------------------------------------------------------------------------------------------------------------------------------- NOTES: - This method is for all NVIDIA/AMD cards - It works so smooth, not noticable input lag or whatsoever.. - No ghosting/flickering, super stable - Game doesn't have official Frame Generation so this is the best option that you can use for Frame Generation for now but you can also wait for the DLSS3/FSR3 in the post patch as well.. - Recorded video feels like the base FPS not the generated LSFG boosted silky smooth FPS because there is no way to record that and almost all of the recorders prevents the Lossless Scaling to run it in the background so you can try this LSFG on your high refresh rate display and you will see the difference like I mention..Even if it the recording was possible, KZbin would have showed the locked 60FPS again..

[@Augmented_Realism]

-Timestamps 00:00 - OPTIMIZED + DLSS QUALITY (FOREST) 02:16 - OPTIMIZED + DLSS QUALITY (FACILITY) 05:05 - OPTIMIZED + DLSS QUALITY (HORDE ATTACK) 06:46 - OPTIMIZED + DLSS QUALITY (WAR SCENERY) 07:50 - FG ON + OPTIMIZED + DLSS QUALITY (FOREST) 10:10 - FG ON + OPTIMIZED + DLSS QUALITY (HORDE ATTACK) 11:32 - FG ON + ULTRA + DLSS QUALITY (INDOOR) 13:40 - FG ON + ULTRA + DLSS QUALITY (FOREST) 14:18 - FG OFF + ULTRA + DLSS QUALITY (FOREST) 15:43 - FG OFF + ULTRA + DLSS QUALITY (INDOOR)

[@Augmented_Realism]

Upcoming Videos - Call of Duty Black Ops 6 Multiplayer - OPEN BETA - The Casting of Frank Stone with AMD FSR3.1 Frame Gen - God of War Ragnarok with AMD FSR 3.1 Frame Gen - Spider-Man Remastered + Miles Morales with AMD FSR3.1 Frame Gen - Dying Light 1 Performance Revisit - 1080P ULTRA Settings + NVIDIA PCSS Test - GTA 4 Vanilla - 1080P ULTRA Settings TEST with DXVK VULKAN API - Dying Light 2 with AMD FSR3 Frame Gen - Avatar Frontiers of Pandora with AMD FSR3 Frame Gen - Tom Clancy's The Division 1/2 - 1080P BEST OPTIMIZED Settings - Tom Clancy's Rainbow Six Siege with Latest Updates - Battlefield 2042 with Latest Updates

[@Augmented_Realism]

Subscribe and Like for more contents..

[@Augmented_Realism]

Recorded with NVIDIA APP and it impacted the entire performance like 4-5 FPS during the test. Resizable BAR is enabled.

[@Augmented_Realism]

NOTES: - This method is for all NVIDIA/AMD cards - Game doesn't have official Frame Generation for now so this is the best option that you can use for Frame Generation but you can also wait for the DLSS3/FSR3 in the post patch as well.. - It works so smooth, not noticable input lag or whatsoever.. - Lossless Scaling Frame Generation may not work stable on weak cards.

[@lukilladog]

Is that a lsfg plugin for msi afterburner?

[@Augmented_Realism]

@@lukilladog You need to download Hwinfo app and you can integrate the Hwinfo.dll for the Hardware sensors in the MSI Afterburner, otherwise there is no way to show the real FPS unless using OBS and I don't wanna use the OBS because of huge FPS impact (leads to 10-12 FPS loss). All my recordings also carried out with Nvidia APP and FPS loss is around 2 to 5 FPS maximum 👍

[@rexghidorah]

Going from 30fps to 100+ fps is crazy

[@Augmented_Realism]

Game also uses EAC (Easy Anti Cheat) so that it also heavily increases the total power draw of the CPU significantly..

[@dramaticmudderer5208]

Have you tried launching it from the retail exe to basically disable eac?

[@Augmented_Realism]

@@dramaticmudderer5208 No, I haven't tried that, I will try 👍🏻

[@TheMistral]

I'm thinking about to buy it. Can be playable with i7 4790k, SSD, 16 gb of RAM and GTX 1080Ti?? Notice is not an RTX so I think I can't use DLSS...

[@Augmented_Realism]

It won't be very smooth experience with that CPU (less than 60 FPS avg) with only FSR3 because this game is very CPU Intensive, wait for official hardware based FSR3 Frame Generation patch (it will come in the next updates of the game) so that 1080 Ti can be able to generate more FPS later on, the FPS boost also wouldn't be as efficient as RTX cards but performance will be ok for that GPU

[@stanleystan7029]

it doesn't work for me 😭

[@Augmented_Realism]

@@stanleystan7029 What is your system specs bro? Which settings do you play with and what's your base FPS?

[@stanleystan7029]

@@Augmented_Realism AMD Ryzen 5 2600 3.40 GHz RTTX 2070, 16,0 Go (i got 55-65 fps at low/1080P DLSS max, 45-55 at high)

[@Augmented_Realism]

@@stanleystan7029 Play the game 1080p Ultra + Med Volumetrics + DLSS Quality but FPS would be pretty much similar like you get because this game is very CPU Intensive and R5 2600 limits your performance appearently but I highly suggest you to use the Lossless Scaling Frame Gen tool like I mention in the pinned comment section but if you can't get decent performance again with Lossless Scaling Frame Gen, it's probably because of your CPU, in this case I would suggest you wait for the official hardware based DLSS3/FSR3 Frame Generation support so that you can easily reach up to 90-100FPS+ or simply upgrade your CPU to at least R5 5600 if you can afford.

[@stanleystan7029]

​@@Augmented_Realism I did as you explain, I see the software activated but I don't see the fps increasing, did I do something wrong?

[@Augmented_Realism]

@@stanleystan7029 How many FPS do you get with only 2X Mode of LSFG 2.3? You should be able to see another FPS Overlay screen up left corner of the screen once you activate the LSFG Frame Gen.

[@indigo7671]

Is it possible to get 100+ fps with this mod on i5 12400f + RTX 3070?

[@Augmented_Realism]

Yes, it's possible. I can already get avg silky smooth 144 FPS experience and this tool increases the FPS to your monitor's maximum supported refresh rate, if it's 75Hz it will be locked at to 75 or if it's 165Hz LSFG 3X Mode will try to boost the FPS up to 165FPS as long as 3070 can handle but I'm sure it can handle it very well 👍🏻 Just use the LSFG 2.3 3X Mode with DLSS Quality, you will be fine if you are on a high refresh rate display.

[@indigo7671]

@@Augmented_Realism Bro, it's mindblowing. I had about 60-80 on medium. Turned on lsfg 2.3 / 3x then it became 144+ fps. But because of input lag I lowered it to 2x. I get 110-130. Unbelievable. After buying 144hz monitor it was hard to play single player games at 60 fps. But now it's not a problem :D BIG THANKS DUDE!

[@Augmented_Realism]

@@indigo7671 That's right bro, it's mindblowing :) and works really good tbh..and the input latency not that noticable and unimportant in single players games like this but ofc set your settings in according to your preference :) Have fun! Don't forget to follow the channel for further contents🙂 Happy to help 👍

[@BublaBenchmarks1999]

why the fps still shows like 52 even after fg on bro

[@Augmented_Realism]

@@BublaBenchmarks1999 because it's targeting my monitor's refresh rate to provide the best smoothness as possible by sacrificing the native FPS to interpolate the new generated smooth frames (LSFG 3X impacts the native FPS performance more than 2X mode btw but 3X mode smoothness and total performance output is greater in this title) so that's not a problem bro, it's freaking smooth here and there is a day and night difference when it comes to smoothness compared to FG OFF state. Don't also forget that I've recorded and that's affecting it like 4-5 FPS more as well. Performance may vary depending on the scenarios btw, open world combat and horde attacks impacts the performance higher than indoor areas but as long as you can get at least 50 to 60 FPS (and even at 40 FPS+ situations) in open world areas as base FPS (without using LSFG), Lossless Scaling Frame Gen would make the game feel buttery smooth on High refresh rate monitors (144/165 Hz etc..). I have also tried DLAA with LSFG and that also worked really smooth but adds some input latency because of considerably lower base FPS compared to DLSS Quality but one thing I also realize that there is almost no difference between DLAA & DLSS Quality visually hence I'm sticking with DLSS Quality for the best smoothness and image quality.