Wash race No.17 : Hotpoint vs Hotpoint Vs Hotpoint Fast wash 60 generation race

[@spirostzakis7345]

Load: 0:20 Start: 6:38 WML540 Heat: 14:46 Ultima Heat: 18:26 WF541 Wash: 21:47 Ultima Inter spin 600rpm: 36:09 Ultima First rinse: 41:43 Ultima Inter spin 1000rpm: 45:37 WML540 Inter spin 600rpm: 48:31 WF541 Inter spin 600rpm: 49:51 WF541 First rinse & Ultima Final rinse: 53:48 WML540 First rinse: 55:58 Ultima Final spin 1600rpm: 58:24 WF541 Inter spin 600rpm: 58:51 WML540 Inter spin 1000rpm: 59:54 WF541 Final rinse: 1:05:06 WML540 Final rinse: 1:08:34 Ultima Finished: 1:08:41 WF541 Final spin 1200rpm: 1:10:43 WML540 Final spin 1400rpm: 1:13:44 WF541 Finished: 1:22:08 Results: 1:33:04

[@RandomStuffByNoah]

Load 0:20 Start 6:38 WMUD962 Heat 14:46 WML540 Heat 18:26 WF541 Wash 21:47 WMUD962 600rpm Inter Spin 36:09 WMUD962 First Rinse 41:43 WMUD962 1000rpm Inter Spin 45:37 WML540 600rpm Inter Spin 48:31 WF541 600rpm Inter Spin 49:51 WF541 First Rinse and WMUD962 Final Rinse 53:48 WML540 First Rinse 55:58 WMUD962 1600rpm Final Spin 58:24 WF541 600rpm Inter Spin 58:51 WML540 1000rpm Inter Spin 59:54 WF541 Final Rinse 1:05:06 WML540 Final Rinse 1:08:34 WMUD962 Finished 1:08:41 WF541 1200rpm Final Spin 1:10:43 WML540 1400rpm Final Spin 1:13:44 WF541 Spider Snaps 1:19:03 WF541 Finished 1:24:01 WML540 Finished 1:33:02 Results 1:33:04

[@laundrylad2006]

In my opinion these are all great machines! :)

[@laundrylad2006]

Mukhtar's Reviews I’ve had every model lol, my favourite was probably wml

[@yalrikabi2007]

@@vacuum_collector26 I found this Hotpoint Extra WMXTF742P washing machine

[@danandlaundry]

They are good machines

[@spirit861]

What about 1:19:03?

[@vacuum_collector26]

@@laundrylad2006 I do actually like the WML I kinda like the last one too now

[@NinjaAssault1388]

Left Hotpoint - makes noise at 1200 RPM Average Hotpoint - makes noise at 1400 RPM Right Hotpoint - as quiet as a mouse at 1600 RPM

[@CHARLES11111]

Whichwasher . Links in Description Below . Hotpoint VS Hotpoint VS Hotpoint Wash race - Fast wash 60 Minute cycle Introduction, load and program: 0:20 Start: 6:38 Results: 1:33:04 0:00 Start Productions

[@vacuum_collector26]

I like them all especially the WF541

[@wandacapstick5476]

0:06:42 Middle Hotpoint Wash 0:55:58 Middle Hotpoint Rinse 1:13:42 Middle Hotpoint Spin 1:31:29 Middle Hotpoint Anti-Crease 1:33:03 Middle Hotpoint End

[@videolover2014]

1:19:03 - When Wash Races go wrong: Drum Spider snaps on Left Hotpoint Washer during Final Spin at 1,200RPM

[@danandlaundry]

That’s what happens when you use powder

[@CasamTheAnimator]

It slowed down the washing machine.

[@TomTheXboxSeriesX]

@@CasamTheAnimator wouldn’t guess :/

[@UltraTitanCameraEditz]

1:19:02

[@spirit861]

1:19:03 Middle Hotpoint Are you ok? Left one No I’m not Right and middle one Well the spider is broken I guess Middle machine Well bye HOTPOINT All machines ‘Crys’

[@mieleboy96]

The WLM range must have two lots of programming this ones is completely differnt to the one my cousin had here's use to do a cool down when on 60c, the first inter spin was 300rpm then the quick 400/600 and the 2nd Inter was 300rpm then the quick 400/600/800. it would also distri rinse and drain into final spin and final spin was 300rpm /300rpm 300/600/800. 300/600/800/1000 and finally I think 300/600/1000/1200/1400/1600

[@whichwasher2007]

weird but believable. it may be different programming due to its top spin possibly. but i have never had a fast wash 60'c/flash cotton 60'c do a cool down though.

[@DeepRinseEnthusiast2002]

whichwasher2007 I think it has a hotpoint wma drum

[@DeepRinseEnthusiast2002]

The ones with hotpoint drum have different programming to the indesit drum ones

[@ruzannaruzanna2351]

INDESITGROUPFAN 1 Орджоникидзе 😍😎😎😋😋😊😚😍😍😭😢😢😰😱😱😭😭😭😭😱😱😭

[@kuldeepkumar21412]

Hotpoint is blocked

[@4sunil]

0:15 like the music!

[@wandacapstick5476]

Just as Hotpoint 1 finnished, Hotpoint 2 continued to spin.

[@cplayzstuff6907]

Hotpoint heaven!

[@ВалерияДроздова-р5щ]

Ян

[@ВалерияДроздова-р5щ]

Цен

[@orologi1000]

funny race: 37:36 hotpoint ultima sudslock 1:04:17 hotpoint WF541 mini waterlock 1:06:16 hotpoint WML540 rattling noise 1:16:54 hotpoint WF541 unbalanced spin 1:19:03 hotpoint WF541 spider snaps 1:28:52 hotpoint WML540 rattling noise again 1:29:07 hotpoint WML540 "1400rpm and too close to the ultima"

[@mielekid]

I.m love washing machines

[@SJSproductions]

Same here

[@dawnleatherlandhunt8722]

Can,t believe the spider snapped on the old hotpoint out of the 3

[@КатеринаГавриляк-м6ж]

Dawn Leatherlandhunt 577ш483854еунфайййй

[@acjfcyber]

Dawn Leatherlandhi'u

[@washing_machine_guy]

11:53 "the WF541 sounds fine!" Little did you know that the spider was gonna snap on final spin 😂😂😂

[@DeepRinseEnthusiast2002]

Washing Machine Guy and it’s a sealed tub machine which means bearings can’t be changed

[@washing_machine_guy]

Washer Guy 2002 I thought those ones had changeable bearings...

[@DeepRinseEnthusiast2002]

Washing Machine Guy later wfs like wf101 wf321/326 wf541/546 wt721 wt741/746 do have sealed tubs and they are anti clockwise ones whereas the clockwise ones have split tubs

[@bobsurrey4043]

Washing Machine Guy I thought that too because other machines in that generation had serviceable drums

[@DeepRinseEnthusiast2002]

Bob Surrey there are 3 wma drums used, one is the 53l 6kg split tub and 55l sealed tub and 58l split 7kg tub

[@domi_2164]

Left washer:broken spider Middle washer: to long Right washer:win

[@anvil_08]

1:35:36 I have Indesit BWA 71053. It has got the same turning off beep. 5:03 and the same turning on beep

[@ТагирБайтаев]

lntroduction, load and program: 0:20 Start: 6:38 Results: 1:33:04

[@asliguven1974]

That 3rd Hotpoint is already finished.

[@Максимсабадаш-с3й]

Pretty cool now

[@mieleboy96]

The WF541 only does 1300rpm on fastwash 60 i went through all speeds on my friends one

[@whichwasher2007]

i thought it was 1200rpm. deffo did not sound like 1400. lol

[@wandacapstick5476]

Why did Hotpoint 2 drain before Hotpoint 1 did if Hotpoint 2 took longer?

[@wandacapstick5476]

Why we’re 2 washers longer than 60 minutes if they we’re on Fast Wash 60

[@angeladamron3645]

1600rpm very high speed

[@servisslimline]

its so frustrating cos the fastwash started out a great cycle on the wf/wt range and got progressively worse range by range :(

[@niceranx5174]

But hotpoint wf541 gone wrong

[@simionemanoijovsimionov2765]

@@niceranx5174+

[@hotpointlover6624]

Whichwasher2007 Can You Do The Spin Race Challenge With The Hotpoint WF541 Vs Hotpoint WML540 Vs Hotpoint WMUD962 Please

[@whichwasher2007]

no because the wf541 is broke. however i have done a spin race on the wml540 and wmud962. as a good comparison between standard and inverter motors. but there is one between a WMA58, the wml540 and a WD420.

[@hotpointlover6624]

whichwasher2007 Ok So The Hotpoint WF541 Is Broke I Think There Something To Do With The Hotpoint WF541 But How About Hotpoint WML540 Vs Hotpoint WMUD962

[@Sossyification]

If the wf541 was fine still on the fast wash 30, you could do a spin race

[@missemmie7895]

Hi do you know the Hotpoint Aquarius WF541 washing machine what water feed did it have Hot and Cold or Just Cold Please reply

[@whichwasher2007]

They have just a cold feed.

[@ТагирБайтаев]

Hotpoint vs Hotpoint Vs Hotpoint Wash race - Fast wash 60 Minute cycle

[@ElTipoEspañol]

when were those washing machines introduced lol

[@mrlaundry101]

Are you sure the wmud heats after soaking the clothes as my smart turns the heater on after finishing the prewash fill and then main wash before even starting soaking :)

[@whichwasher2007]

Mrlaundry101 it turns it on straight away on fast wash 30. But since it takes more laundry on fast wash 60. It dose a short saturation phase.

[@mrlaundry101]

whichwasher2007 the wonders of different programming:)

[@asliguven1974]

On laundry

[@UltraTitanCameraEditz]

1:19:02 when wash races go wrong Drum Spider Snaps on Left Hotpoint Washer during Final Spin At 1,200RPM

[@StrawTech8]

im curius to see hotpoint vs indesit vs hotpoint

[@سجوديسجو-و4ظ]

NukeGamin22g YT

[@Sossyification]

The WF541 does seem to go fine, on Final spin on 1200rpm, it had a snap spider

[@Ksi_Uk]

What Spiderman

[@JoseSantos-rd2ct]

Cool

[@Owen-hs9dk]

37:45 Suds lock spin

[@MisterBrownJack]

3 hotpoint washing mashines at the shame time

[@erdoganyucedag4386]

Results 1:33:04

[@videolover2014]

Hello! I'm new to you, but I've been watching some Washer Videos that you've been making and I'm into a little more of the Wash Race Videos. Anyway, there are some Washers that you should make Videos of, especially in a Wash Race. Want me to tell you the Washer Models that you should make Videos of along with the Existing Washers that you have?

[@whichwasher2007]

No. Because alot of the machines I have on this channel have been sold on. Don't worry though. There is gonna be many wash races to come of different cycles, brands and ages. This weekend is cheap Vs expensive (Hotpoint Vs miele)

[@videolover2014]

Also, in this Video, plus the other Video with the same 3 Hotpoint Washers, how come the Left Hotpoint Washer Drum Spider snapped at Final Spin, plus making noise in the other Video with the Intermediate Spins & Final Spin? Also, in the other Video, when the Left Hotpoint Washer was tumbling slowly after the spinning, it sounded like a Whale because of the already snapped Drum Spider from this Video when it was on Final Spin. Also, are your Washers being sold after you make videos of them or so, even after your Videos of them in a Wash Race?

[@whichwasher2007]

apart from that now broken hotpoint yes they get sold on. they also can be filmed weeks in advance. but with no end in sight of ending the wash races, you bet there is loads more to come.

[@videolover2014]

Well, can I tell you the Models of the Front Loading Washers at least for what I would love to see in the Future when it comes to more Washer Videos, even more Wash Race Videos? There are some Front Loading Washer Models I happen to like that I would love to see in the Future one day, especially in Wash Race Videos.

[@ТагирБайтаев]

WHICHWASHER PRODUCTIONS W

[@博兰托]

Why do you think WF541 is everything fine & your washer called *WF541* Was trying to stop quickly attempt spider to snap the tub!!!! That is funny!! xD 😆😆😆😆😆🤣🤣

[@asliguven1974]

3 Is spin 1600RPM 3rd one is finished.

[@anvil_08]

1st Hotpoint: broken drum 2nd Hotpoint: half broken drum 3rd Hotpoint Indesit WIN: nothing

[@CasamTheAnimator]

The second one did not slow down, It's drum is a little bit broken.

[@MAZ105-chan]

Sounds 1100 for Miele, LG and Privileg...

[@jackiemyself3504]

1:19:04 Hotpoint Spider Snapped

[@erdoganyucedag4386]

The finish

[@erdoganyucedag4386]

Is loud.

[@forzalad6415]

does the middle machine have an indesit motor as it sounds just like my one?

[@whichwasher2007]

Indesit (Hotpoint) use different motor's. Where as Electrolux just sticks to Nidec motors. The middle one has an Indesit drum. At the time. The wml540 was made with both the Indesit and the WMA drums.

[@forzalad6415]

okay thanks mate

[@GalaxyGamer-qn1mv]

@@whichwasher2007 that's ashame I have the indesit one

[@eymenalisogutlu9380]

Lgh

[@teopas2007]

1:19:03 broken drum

[@washinglad1400]

1:19:04 *Hotpoint WF541's spider has left the machine*

[@wandacapstick5476]

Why did 2 Hotpoint Washers take more than 60 minutes?

[@videolover2014]

The Sound in your Video here has glitched out for a second at 1:29:53 while the Middle Hotpoint Washer was on Final Spin. :-/ The Camcorder that you're using, does the Sound somehow glitch out for a second after a while when doing Videos of the Front Load Washers?

[@whichwasher2007]

The camcorder records in 30 minute clips. It sometimes dose not record the sound at the end of the clip for a few milliseconds.

[@danandlaundry]

@@whichwasher2007 that’s why I prefer using iPhones to record my full cycle videos as it records for as long as there’s enough storage and battery and I can just plug the device in to a power pack

[@wandacapstick5476]

0:06:41 Left Hotpoint Wash 0:49:51 Left Hotpoint Rinse 1:10:43 Left Hotpoint Spin 1:20:55 Left Hotpoint Anti-Crease 1:22:09 Left Hotpoint End

[@Steam171-e4t]

0:09:34

[@despoinaerezogloy1518]

@@Steam171-e4t γωξκξξ

[@despoinaerezogloy1518]

Η

[@despoinaerezogloy1518]

Ωω

[@博兰托]

I ❤ WML540

[@wandacapstick5476]

0:06:42 Right Hotpoint Wash 0:41:44 Right Hotpoint Rinse 0:58:24 Right Hotpoint Spin 1:08:42 Right Hotpoint End

[@СергейМихайличенко-у7р]

Кгнгщбэьь .юбот

[@СергейМихайличенко-у7р]

,●●●●●●●●¿

[@Sossyification]

It's only the WF and the WML that does anti-creasing

[@Jay63783]

wf541 missing the bottom panel i wonder why

[@博兰托]

1:19:03 Too broken

[@stfuplsok]

does* go / does* not (NOT 'dose')

[@Irml1000]

Rewwq12w

[@Wasmachineman]

Do you still have that Miele W487?

[@whichwasher2007]

yes, and i have got it out for a play tonight.

[@Wasmachineman]

Cool, will you record it? Never seen one running before.

[@samuelburden2112]

The wf541 did spin break because the outertub might of come loose

[@arpsichord7474]

thats not obv

[@MetProduct-td4rz]

No the spider snapped

[@danandlaundry]

No it’s because the drum was rubbing on the seal due to the spider snapping

[@LaundryGuy1500]

That went bad in the end

[@erdoganyucedag4386]

Imao

[@wandacapstick5476]

Hotpoint WF541 didn’t malfunction at the end of this video.

[@jeannettehellewell9910]

Start Heat heat Wash Inter spin 300rpm 300rpm 400rpm 600rpm

[@Tubeless-285]

Spider just snapped?? How?

[@danandlaundry]

The middle hotpoint looks has a similar layout on the control panel to my Indesit

[@vacuum_collector26]

Its made by Indesit

[@danandlaundry]

@@vacuum_collector26 go away from me

[@danandlaundry]

@@vacuum_collector26 I know it’s indesit but you always haunt me

[@vacuum_collector26]

@@danandlaundry how am I haunting you this is a public comment section I'm allowed to reply or comment

[@vacuum_collector26]

I don't know if you ever realised I actually apologised to you before (even tho you were the one in wrong) to stop this but since you are too busy holding grudges you never noticed life is too short to hate people over the internet for silly things

[@mr.masterbreuvouchegara20i36]

3nd hotpoint make the first inter spin

[@Owen-hs9dk]

46:55

[@introverted.magic.shifters]

What is a spider on a washing machine?

[@whichwasher2007]

Gives the drum strength to stay round like a drum.

[@introverted.magic.shifters]

@@whichwasher2007 then how did the spider snapped

[@wissamelothmani4736]

Its make unbalanced spin

[@Sossyification]

My Hoover Vision Tech does really unbalanced spins which causes it to make knocking noise and for some odd reason the spider didn't snap.

[@washdrytvbyhotpointlover2009]

1:19:02 spider snaps off gose

[@piotrps426]

Zoom ZHL440 was made in July 2010

[@DhruvK123]

Hotpoint Left And Hotpoint Middle final fast spin 1:19:03

[@spirit861]

Spider also snaps……..

[@SkyBloxRoblox]

37:45 suds 1:19:03 uhh I’d I did i did not do it 1:19:26 1200 rpm 1:20:42 left finished

[@erdoganyucedag4386]

Menu 00:00

[@Washercrazy]

at 1:20:40 the drum is now turning very stiff

[@kellycheng1143]

一

[@سجوديسجو-س6ع]

Washercrazy

[@carmencalin4547]

Mkkkk,"'cc

[@UltraTitanCameraEditz]

1:02:11

[@CHARLES11111]

Spin Race No. 120：Hotpoint Smart vs Hotpoint Aquarius.

[@никомунеизвестный-п3и]

1:06:14 spiders rip

[@danandlaundry]

1:19:05

[@zuhaibkhail9573]

1:19:03

[@asliguven1974]

Looks like the everthing is fine.

[@erdoganyucedag4386]

Start 6:38

[@erdoganyucedag4386]

Hotpoint fast wash 1st Hotpint 2nd Hotpoint Ultima 3rd

[@washdrytvbyhotpointlover2009]

0:20 6:35 1:33:04

[@ТагирБайтаев]

Links in Decription Below

[@cathbeck6643]

1:19:03 spider broken on the left hand side and it's a WF541

[@shahidahbibi8659]

The Hotpoint Wml541 is now at 1600rpm

[@cathbeck6643]

WML540

[@mieleboy96]

Is the wml540 on 60c?? My cousin's WML560 always did a cool down on fw 60 at 60c

[@whichwasher2007]

yeah it was set at 60'c

[@DeepRinseEnthusiast2002]

INDESITGROUPFAN 1 does his have a hotpoint drum as I believe the wml/wmf/wmd machines with hotpoint drum do a cool down

[@mieleboy96]

Washer Guy 2002 yeah it did

[@DeepRinseEnthusiast2002]

INDESITGROUPFAN 1 and it has a super silent motor and 58l 7kg drum although rated 6kg what colour is it?

[@mieleboy96]

Washer Guy 2002 white it had no eco tech badge ither

[@thehackyt3404]

*Top*

[@kevinlimbu-qm6hd]

How many words was missing?

[@ernestogarza5625]

10.12 coll

[@tolyabelyaev1551]

10:12

[@SkyBloxRoblox]

6:42 41:44 58:24 1:08:42 55:58

[@MinhPhong02]

Spider snapped

[@amidkhan3960]

My favorite washer is the WML540 in the middle!

[@DisuzOnYT]

Same

[@ernestogarza5625]

heat22:60

[@GamerAndReviems]

1:19:03 Problem Hotpoint WF 541

[@terrysmith9022]

Hard to tell

[@zuhaibkhail9573]

Right Hotpoint no anti crease

[@wandacapstick5476]

Fast Wash 60 means 3600 seconds.

[@asliguven1974]

3rd Hotpoint is Balanced

[@NotLGWasherBansWorstUsers]

Mission Failed Indesit Was Missing

[@NotLGWasherBansWorstUsers]

Hotpoint Wins

[@Itsanimal938]

1:19:04 R.I.P.

[@SkyBloxRoblox]

1:19:03 spider snapped

[@pauloquintana9101]

Why did spider snap on your Hotpoint WF541 Washing machine?

[@CasamTheAnimator]

Spider goes through the drawer, and then goes through the rubber pipe, and then goes between the drum and the tub and makes a cobweb that snaps the washing machine.

[@SkyBloxRoblox]

1:19:03 28:03 52:50