Washing Machine fills slow makes Screaming/whistling Sound - CLOGGED Water Inlet Valve - EASY FIX

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Inlet valve: amzn.to/3QB0UTZ
Lid switch: amzn.to/3xIZZu2
🧰

[@DIYwithMichaelBorders]

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. Inlet valve: amzn.to/3QB0UTZ Lid switch: amzn.to/3xIZZu2 🧰

[@benh5492]

I wish we could have been able to HEAR THE NOISE BEFORE YOU FIXED THE To see if was the same Noise problems that we’re having. 😞

[@abeg3047]

Yup

[@Forever29plus1]

That was my entire point of going to this video to see if its the same sound. Ughh waste of time.

[@02051970sonny]

No shit 😂

[@scootermom1791]

Total waste of time.

[@johndoe-vc1we]

So many videos never show this 🙄

[@dryoatmeal98]

I was getting both the high pitch squealing and the slow fill. I watched this video and gave it a try. I took the hoses off of the inlet valve and the screens were definitely clogged with crud. I cleaned them out and reconnected the hoses and boom! Worked perfectly, no noise and full stream of water going into the drum. For me, there was no need to replace the valve. Thanks for the info!

[@ari3lz3pp]

Thank YOU also for explaining the noise. I think it's a inlet valve issue for me too but no squeak; it's more like a scraping/maybe like it's trying to cough up stuff. Hard to explain. But no scraping from drum or anything since it's not agitating but is filling.

[@garyhaley5008]

Easy Peasy! I thought it was going to be a big job! Direct, to the point! Excellent video! Thanks!

[@DIYwithMichaelBorders]

Awesome Awesome, great job making it a DIY project Gary. Thanks for sharing this. 😎👍

[@DaneRobertson85]

I'm experiencing loud screaming noise but you didn't let us hear the noise to compare

[@jeredphillips8744]

thank you

[@fourdegreeswarmer]

Great vid…thank you so much

[@DIYwithMichaelBorders]

We appreciate that, thanks for watching.

[@edgargarcia3721]

Super good vid helped me out for sure

[@DIYwithMichaelBorders]

same ol g gar So glad to help and thanks for watching. Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and ring your KZbin bell 🔔 that would be awesome thanks again! 😎👍🔧🔩

[@garyhaley5008]

Putting it back together was much harder than taking it apart. I couldn't get the frame to fit right. I did eventually get it! Thanks

[@DIYwithMichaelBorders]

Thanks for sharing this Gary, that can definitely be a tricky step. 😎👍

[@dethanww2]

May I suggest showing how to reinstall the shell when complete? Solid series though. Saved me $2,000.00

[@DIYwithMichaelBorders]

Good morning ☕️ we really appreciate your feedback. Any and all feedback is greatly appreciated, as it helps us continue to get better and provide the DIY community with better content. That’s amazing you saved $2,000.00. You will continue to benefit greatly and save lots of cash over the years by making your projects DIY. 😁👍🧰

[@sexybdy1]

you saved me $ 250 there my friend

[@DIYwithMichaelBorders]

Awesome, saving money is a great thing. Great job making it a DIY project, definitely paves the way for a more enjoyable weekend ahead. Let us know if you have any questions.

[@breakingbadheisenberg9703]

My makes a choking sound ? Checked hoses , there not the problem also checked the intake screens , still it slow to fill and makes choking noise?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. You may just have a damaged inlet valve. Behind the screens are inlet valves, one on Cold, one on Hot, that may be beginning to flutter as it fills. The inlet valves close to not allow water to continually flow into washer when it is not running. Replacing this entire part will hopefully fix your issue. Please keep us posted.

[@breakingbadheisenberg9703]

@@DIYwithMichaelBorders thank you for replying

[@DIYwithMichaelBorders]

@@breakingbadheisenberg9703 😎👍🔧🔩

[@dubiousjesse]

Will this work for front load washers too?

[@DIYwithMichaelBorders]

Thanks for watching & this part is slightly different in design as those inside front load washer however your screens on back of machine where hoses connect to are the same. 😎👍

[@itsthemuscledad38]

Did your washer make a squeal during sesnsing fill cycle?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Don’t recall any squealing, however it may be related.

[@1888CHAD8881]

my old washermachine made a whistling sound when it was finishing (for about 2 days) then it died.. I got a brand new washing and it whistled too

[@DIYwithMichaelBorders]

NotMyName Thanks for watching & that’s no fun. Have you pinpointed what’s causing the sound? Brand new machines shouldn’t make any odd sounds. 😎👍🔧🔩

[@1888CHAD8881]

@@DIYwithMichaelBorders i believe air in the drain hose? it only did it once.. Im honestly not sure.. it can't be the machine

[@DIYwithMichaelBorders]

NotMyName Thanks for the update & let us know if it starts doing odd things or making unique sounds. 😎👍🔧🔩

[@joshchavez2996]

Where you find the inlet valve at?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We are hanging out today at the DIY Raptor headquarters watching college football answering all questions for our fellow DIY’ers. We appreciate you reaching out to us. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3HnhvnG 😎👍🔧🔩

[@sixpackbinky]

Mine makes a booming sound filling with water, brand new

[@DIYwithMichaelBorders]

Thanks for watching, that’s no fun...especially being brand new. Do you see any signs of leaking?

[@JRS-iq9pz]

Couldn't you have just cleaned that thing out and put it back rather then buy a new one?

[@DIYwithMichaelBorders]

JRS2623 Thanks for watching. That’s definitely an option. We hope the video helped. Please subscribe to the channel and ring your KZbin bell 🔔 this will be very helpful to us thanks again! 😎👍🔧👍

[@katbosh7748]

Where's the screaming noise?

[@DIYwithMichaelBorders]

Thanks for watching. Maybe neighbors playing outside. 😁👍

[@jeredphillips8744]

its comin from inside the inlet valve.its clogged with sediment/debris.clean it out or replace it/youre good 2 go.

[@jeredphillips8744]

he didnt let us hear it.

[@DIYwithMichaelBorders]

@@jeredphillips8744 Thanks for watching & sharing this. Any & all helpful info is greatly appreciated. Us fellow DIY’ers need to stick together! Hope all is well with you and your family. 😎👍🔧🔩

[@jeredphillips8744]

@@DIYwithMichaelBorders thanks man i hope your fam is good 2.the video was awesome.my only suggestion would be to run the machine beforehand w/the faulty inlet valve still installed so we could hear the sound for comparison purposes.