A water level indicator model is a simple electronic device used to monitor and display the water level in a container, tank, or reservoir. When the water level reaches a certain probe, the corresponding LED lights up, indicating the current water level. This helps users monitor water levels without needing to physically check the container. More advanced models may include additional features, such as audible alarms, automatic pumps to maintain desired levels, or the ability to interface with other devices for remote monitoring. The water level indicator model finds applications in various fields, including agriculture, industrial processes, home water tanks, and more. The advantages of using a water level indicator model include: 1. Convenience: A water level indicator eliminates the need for manual checking of water levels in tanks or containers, saving time and effort. 2. Cost Savings: By preventing overfilling or running tanks dry, the indicator helps conserve water and energy, leading to potential cost savings. 3. Early Warning:It provides an early warning system, alerting users when water levels are too high or too low, helping to prevent potential flooding or equipment damage. 4. Efficiency:In agricultural or industrial settings, maintaining optimal water levels can enhance productivity and efficiency by ensuring a consistent supply for processes or irrigation. 5.Remote Monitoring: Some models offer remote monitoring capabilities, allowing users to check water levels from a distance using smartphones or computers. 6. Reduced Maintenance:Preventing overflows can help extend the lifespan of tanks and equipment, reducing maintenance and repair costs. 7. Customization:Users can often set desired water level thresholds, tailoring the system to their specific needs. 8. Easy Installation: Water level indicator models are relatively simple to install, making them accessible to a wide range of users. 9. Environmental Benefits: By preventing water wastage and promoting efficient water use, the indicator contributes to environmental conservation. 10.Safety:In scenarios where water levels are critical for safety reasons, such as in boilers or cooling systems, the indicator enhances safety by ensuring proper water levels are maintained.
@SabariSabari-hq3yh Жыл бұрын
@@nakulsahuart5hnn
@vidhanmaurya2026 Жыл бұрын
Thanks sir 🎉
@pandurangborade278611 ай бұрын
@@nakulsahuart0:48
@pandurangborade278611 ай бұрын
😂😮
@wtf_gamer4511 ай бұрын
LED=4 RESISTOR 220 OHM=4 TRANSISTOR BC 547=4
@SatishKumar-s3w5 күн бұрын
This science experiments was so cool and🎉🎉 superb🎉🎉❤🥰😍
@Abisrinatarajan10710 ай бұрын
This project I am 1st prize 🎉
@nakulsahuart10 ай бұрын
Congratulations 🎉
@stickination11935 ай бұрын
I am come the 69th place out of 100 with this
@lts_cuties_comparing5 ай бұрын
In which class
@mamidirupesh30665 ай бұрын
Again first price 🎉 for your English
@lts_cuties_comparing5 ай бұрын
@@mamidirupesh3066 😅😅
@sadhuramverma9999Ай бұрын
You are very talented!!
@Dharshan-k1v2 ай бұрын
Nice project I also did this project it was really working good and top ratings from the guests in the competition Thanks a lot❤
@nakulsahuart2 ай бұрын
Thanks for sharing your experience!😊
@meruemespineda9282 ай бұрын
is this applicable to a bigger tank?
@riturajni759128 күн бұрын
Yess!!!!@@meruemespineda928
@maheshpinninti67038 күн бұрын
Bro let me know how to do it
@alparahevar72145 ай бұрын
Best project in my life❤❤🎉🎉
@GaneshPatil-y7y5 күн бұрын
Project is successful working😊❤❤ I hope I am winner to 1st prize😊😊😊❤❤❤
@GaneshPatil-y7y5 күн бұрын
Mala 1st prize bhetayala pagije ❤❤plz god😊😊
@SGTDU4 ай бұрын
Thankyou sir for you i can make and i can understand 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@SandhyaKhempral4 ай бұрын
Nice sir i will be doing for this science Exhibitions
@shilpasingh-vh7kq13 күн бұрын
❤❤❤❤❤
@HarbhansSingh-zz7glАй бұрын
Sir Mane ise banaaya hai our muke 2prise 🎉 Mila hai Thank you sir
@nakulsahuartАй бұрын
Congratulations 🥳
@kareemullahkareem5049 Жыл бұрын
Can we really apply this to our house what if length of wire is increased then it will work or not
@sjjvddyumiherhv3709 Жыл бұрын
am currently doing this to my house , the water tank is on the roof , i will use long wires but it won't affect anything, and also I don't recommend using cartoon if you are doing this in home to prevent fire i will try to find something more secure maybe plastic or wood
@ikrammughalmughal986810 ай бұрын
@@sjjvddyumiherhv3709 Means agr Hum isk0 tanki mn use krngy tw work kreg ya ni?
@SehajPreet-wr1nk6 ай бұрын
Sir it is worked and I can made. This so superb 🎉🎉🎉🎉🎉
@DayatHidayat-m4y9 ай бұрын
Sir do we need connect the transistors together?
@nakulsahuart9 ай бұрын
Connect the components as per given circuit in video.
@Artistpro15112 ай бұрын
Me and my friends make this for science exhibition. Best brain project 😊😊❤. We are in 8th class
@Samu2387323 күн бұрын
We also
@ehtishamulhaq87854 ай бұрын
Sir Which type of clay you have used in this 1:04
@nakulsahuart4 ай бұрын
It’s M-seal you can get it from hardware store.
@ehtishamulhaq87854 ай бұрын
@@nakulsahuart Sir Which colour code Resister it is
@adailtonvilares12662 ай бұрын
Adorei o trabalho e principalmente o acabamento, parabéns
@nakulsahuart2 ай бұрын
Thank you
@iamnot.legend4 ай бұрын
I am going to try thanks for the idea 😀
@MuhammadQasim-ej6hc20 күн бұрын
what is that brownish thing you applied to the transistor before soldering it to the resistor and secondly what was that white material you used to prevent water leak from the bottle?
@nakulsahuart20 күн бұрын
First one is soldaring pest ( check in electrical shop), second one is m seal (check in hardware store)
@simplyus15614 ай бұрын
tried it and worked perfectly thank you 🙏
@luveaica3 ай бұрын
hello can i ask the size of the resistor and voltage of the switch and buzzer thank you
@simplyus15613 ай бұрын
@@luveaica 3.5V to 9V buzzer
@simplyus15613 ай бұрын
@@luveaica bought the resistor and switch from same link given in description of vid
@suryaprakash3156 Жыл бұрын
Sir isi ko ghr ki tanki k liye bnana h ac current k sath tb or kya instrument use karene padege alag se . Ya same yahi model ac current me b chalega kya . plz guide me
@nakulsahuart Жыл бұрын
Ye AC ne nahi chalega , aap battery ke place me 5v charger use Kar sakte ho . How to convert old mobile charger into DC adapter #diy kzbin.infoDA-ntHd0618?feature=share
@suryaprakash3156 Жыл бұрын
@@nakulsahuartac current ko charger k use se yahi pura system chal jayega
@suryaprakash3156 Жыл бұрын
Connecteor le liya sir mene isko kis point me lagana padega
@suryaprakash3156 Жыл бұрын
@@nakulsahuart sir apne 220 ohn ka resutor liya h mene ek or video me dekha to unhone 1 k or 10 k resistor liya tha to kya dono same he kaam karega
@-EC--xe1cr Жыл бұрын
Thise project I was done in my diploma...😁
@ikrammughalmughal986810 ай бұрын
Tw wo work kr rha ta or successful ta?
@Ashokkumar-hv1mg2 ай бұрын
Thanks for the project
@poonammanav13582 ай бұрын
Hi sir can we add a thin pipe for drainage just like the one we use for patients to give glucose
@nakulsahuart2 ай бұрын
Yes you can add pipe drainage so you can showcase water level from high to low . ( I used water level pipe got it from hardware store)
@ShailendraSingh-qx9sy2 ай бұрын
1st prize 🎉❤
@nakulsahuart2 ай бұрын
Congratulations
@seemivj701016 күн бұрын
Thank too much 🎉 😊
@amitkumarpatil498610 ай бұрын
How can we modify this as a low water indicator
@IonicExperiments10 ай бұрын
Sir Cardboard ka size kitna h
@shilpasingh-vh7kq13 күн бұрын
❤❤❤❤❤❤❤😊😊
@luna-ny1sx4 ай бұрын
can I use 100 ohm resistor
@omenagarwal237Ай бұрын
Maby
@ranjupandit4045Ай бұрын
Yes
@Mr.cRazybotzz_YT10 ай бұрын
Sir, what if i use different transistor (bc 557) Or diff resistor
@SGTDU4 ай бұрын
You can use 547 transistor 🎉🎉
@Kage-gk5wz Жыл бұрын
Is there any alternative for soldering iron?!
@himanshugautam212 Жыл бұрын
Bro you can do soldering from electric shop in cheap😊
@Kage-gk5wz Жыл бұрын
@@himanshugautam212 oh okay thanks dude👍
@himanshugautam212 Жыл бұрын
@@Kage-gk5wz welcome bro
@minnalgamer5828 Жыл бұрын
Sir what is the use of the tube and how do we use it
@RajaTharikaThirupathi6 ай бұрын
I think after completing the demonstration, to take the water out of the bottle
@omenagarwal237Ай бұрын
Yes @@RajaTharikaThirupathi
@DayatHidayat-m4y9 ай бұрын
Sir just want to ask ,does the length of the wire affect it sir?
@nakulsahuart9 ай бұрын
Maybe.
@MayankMavchi-z3y10 ай бұрын
Thank you sir for exieting inovatig project😂🎉
@Yanh.n56362 ай бұрын
What is the first red wire before 25% use for
@THARS_YT2 ай бұрын
That's opposite current if there was - the red was +
@samamahmoud441914 күн бұрын
Explain more please
@akshjaiswal19893 ай бұрын
Thanku sir it is working
@poonammanav13585 ай бұрын
Sir I have made this project but the buzzer is not working . Please tell if I can connect two batteries to it
@nakulsahuart5 ай бұрын
Check with interchanging buzzer terminals.
@poonammanav13585 ай бұрын
@@nakulsahuart sir i have already done it but buzzer is still not working
@UttamKumar-fi6rt4 ай бұрын
Thank you sir it's working very nice
@chetalikumari-oe6ey8 ай бұрын
Sir mere pass 1k ka resistor or 2222A ka transistor h wo use kr skti hun kya .
@rbhouse66042 ай бұрын
Njan ith mukkuvane......😊
@Firegirls46411 ай бұрын
Without soldering can we do this ???
@nakulsahuart11 ай бұрын
Yes you can do , you need to joint properly.
@Firegirls46411 ай бұрын
@@nakulsahuart can I use tape sir ?
@animalsbehaviour25 Жыл бұрын
Ye sab tools kaha milege
@nakulsahuart Жыл бұрын
Material list updated in description box .
@AyushSinghpatel-e7e2 ай бұрын
Bhaiya apnai bottle ke andar pipe ko cheepkanai ke liye kis cheej ka use kiya h ??? please bta dijiye
@nakulsahuart2 ай бұрын
Masking tape
@SuhasiniGaikwad-f4d Жыл бұрын
Hello sir what is name of that circle coin which in something
@nakulsahuart Жыл бұрын
Plz Mention time of video.
@mysteryspace1225 күн бұрын
Total cost to making project??
@infinityisscary5 күн бұрын
Under 300
@rakhigupta2442 Жыл бұрын
Sir ye white wala jo aapne use kiye uski jagah kuch aur use kr skte h ky
@nakulsahuart Жыл бұрын
M seal hai hardware store me mil jayega 20-25₹ ka hai , ya pir hot glue gun use Kar sakte hai.
@rakhigupta2442 Жыл бұрын
Thqn sir😊
@AchiKanu10 ай бұрын
Sir yeh kaunsa principal mein work karta h?
@codedarkshade-brawlstar3 ай бұрын
Beyonce
@bamangpako107210 ай бұрын
Based on which principle?
@mahmoodshamirzaie8164 ай бұрын
Hello. Thanks for this video. How can I use this project when the distance between tank and indicator installation place is large, for example 9m? Usually large distance is a challenge!
@AD_techzАй бұрын
Nice project
@bhagichandel3280Ай бұрын
Sir wire konse hai Pani se wire kharab nhi hojayenge❓
@aadityapranjaliworld2498 Жыл бұрын
Which tape have you used to stick the box
@nakulsahuart Жыл бұрын
It’s masking tape you can get from hardware store
@babitaprasad-w1i Жыл бұрын
Tq
@animalsbehaviour25 Жыл бұрын
Please send me amazon link for this tools
@nakulsahuart Жыл бұрын
Material list updated in description box .
@SAPROXYGAMERАй бұрын
what if we didnot use flux soldering paste. then the project will not work or what
@nakulsahuartАй бұрын
It will work if joint probably.
@SAPROXYGAMERАй бұрын
@@nakulsahuart ok tq so much
@carmelajean7477Ай бұрын
can I ask of what the name of the colorful wire for the water indecator
@prathabajracharya907814 күн бұрын
This is based on which topic of physics?
@fine47718 ай бұрын
Sir, are they regular copper wires? What type of wires are they? Thank you
@nakulsahuart8 ай бұрын
Yes you can use regular wires .i used Flat Ribbon Wire .
@imtyajmulla2325Ай бұрын
Sir Explain These project in 15-20 Lines please 🥺
@trimandeepsingh7505Ай бұрын
Plz tell the watt of the resistor used? 220ohm and what is watt?
@nakulsahuartАй бұрын
It’s 1/4 watt
@Papertube___tamannathread Жыл бұрын
Which type of wire you used please tell me
@nakulsahuart Жыл бұрын
check description for material list .
@janellajoycecasil2 ай бұрын
hi sir may I ask, what are the exact materials do you used? 😊😊
@nakulsahuart2 ай бұрын
Check description
@Samiksha91125 ай бұрын
Maximum budget kitna hogaa plzz tell...
@sangeejothisangeejothi3333 ай бұрын
Maximum 400to 500 rs I tried it
@omenagarwal237Ай бұрын
Òĥ
@joannahsanthosh5101 Жыл бұрын
sir aap transistor ke collector, base or emmiter ko kis kis ke sath connect kar rahe ho??..can u mention specifically
@nakulsahuart Жыл бұрын
You can connect as per video ( set video quality above 480p) circuit also given in video.
@Gamopanda Жыл бұрын
Vai aitar importance and ki kore kaj kore tar akta script dile valo hoto.khub urgent 😢
@honeyjajoriya26204 ай бұрын
🎉🎉🎉❤
@hemavathin632525 күн бұрын
Sir can you please tell us about disadvantages🙏
@Navaneet274 ай бұрын
Can u please tell me as to why are we using resistors in this and also the transistors
@GamersGang500Ай бұрын
thank you sir but make it with coca cola it's better XD
@NazirSheikh-o3lАй бұрын
Sir Can I made this project the colour code of Resistor with Red,Red,Orange,Golden😢
@Official.vivek44Ай бұрын
Bro you can buy a resistor only at price 0.50 rs or 2 resistor at just rs 1
@Esha648 Жыл бұрын
Assalam--o-Alikum sir, sir is project ki report ya presentatiom kasy ready kary bscs k liye. ku k hm ny ye project banana ha likin ap ny is ki report nahi banani.
@Samiksha91125 ай бұрын
I am also bsc cs student...
@BADARUDDINmemon2 ай бұрын
Very good
@PrashantVishwakarma-oh7gv15 күн бұрын
🎉
@prabhavathik7062 Жыл бұрын
We can buy all the thing in maker bazar website or app
@nakulsahuart Жыл бұрын
It’s up to you, you can buy online/offline
@123creation70 Жыл бұрын
Sir I am in 6th standard and four model help us a lot in our work .
@MSRitheesh2 ай бұрын
I got 1st prize for doing this
@nakulsahuart2 ай бұрын
Congratulations 🙌
@MSRitheesh2 ай бұрын
Thank you
@NarendraPadhan-d1t4 ай бұрын
I got 1st prize 🏆
@Surendranag-wn8mcАй бұрын
Really 🎉🎉🎉
@satyamjha327011 ай бұрын
Sir vo golden colour ka paste kya tha aur kaam kya hai uska 🤔
@nakulsahuart11 ай бұрын
Its soldering paste, soldering karne ke kam aata hai , 10-15₹ ka miljaega, electrical ya hardware store se.
@satyamjha327011 ай бұрын
@@nakulsahuart kya ye jaruri hai
@nakulsahuart11 ай бұрын
@@satyamjha3270 isse soldaring ache se ho jata hai .
@KavitaKadam-wu2nq Жыл бұрын
Sir Marathi made Explanation speech saga na Please sir
@afrahakabir7718 Жыл бұрын
Project on robotics also ..
@Basanti-ig5ew8 ай бұрын
Sir material ka name
@nakulsahuart8 ай бұрын
Given in video and description
@Ak...alight11 ай бұрын
Buzzer kitne volt ka
@nakulsahuart11 ай бұрын
5-9v
@kevincrisnaldi87472 ай бұрын
@@nakulsahuartkalau 3-24V bisa?
@jcurve57507 ай бұрын
Even after water is drained out,last 2leds glows a bit ..how to resolve it?
@youknow3416 Жыл бұрын
Is shouldering mandatory? Can't I just keep them as it is my just twisting them together?
@nakulsahuart11 ай бұрын
Yes you can do.
@suryaprakash3156 Жыл бұрын
Transistor me b resistor jode 10k ka to kya ye sahi rahega
@miafrancis4580Ай бұрын
PLEASE STATE THE BENEFITS AND THE WORKING OF THIS THING
@Fitness_flex6611 ай бұрын
Bro koi project batao jo class 11 ke concept use ho
@nakulsahuart11 ай бұрын
You can select from play list
@akshjaiswal19894 ай бұрын
Sir how much cost it will
@NidhiKumari-c5g8e Жыл бұрын
Sir ye button dabne se automatic baatti bar Raji hai ku. Mai ye banaya hu
@Ptiti-t1p5 ай бұрын
Mera bhi
@buntyGamer1014 ай бұрын
I can made this project easyly
@AkshitKapoor-ry8mw4 ай бұрын
Grammar thik krle apni
@sushantamondal8408Ай бұрын
Thank you sir
@VandanaGupta-p2m Жыл бұрын
Sir I'm in 9th I am inspired by your videos very much. Sir could you give me a suggestion for my science project I am confused
@nakulsahuart Жыл бұрын
You can watch other videos from play list , choose according your subject.
@VandanaGupta-p2m Жыл бұрын
Thanks sir
@DanialRajpot-z4x24 күн бұрын
Kya pani aik pure conductor Hai
@himanshugautam212 Жыл бұрын
Bro can we use 18650 3.7 v battery with charging module 😢😢
@nakulsahuart Жыл бұрын
Yes Kar sakte ho
@himanshugautam212 Жыл бұрын
Bro single battery ya fir series me lagana padega 3battery ko
@nandugamingts371710 ай бұрын
Sir ye project pani ki tanki me lagaye to current nahi lagega kya ...? Vaha pe to High Voltage ⚡ Battery 🔋 use Hogi please reply Sir 🙏
@dimonhe99515 ай бұрын
Bro uske liye 1 alag se kit ata hai aap usko borewell ke cir uit ke sath jodna padega abhi sir ne uska hi model banaya hai mini
@AyeshaFred3 ай бұрын
I like this but I would like to try on a breadboard. How can I achieve this on a breadboard?
@nakulsahuart3 ай бұрын
You can use , and you can cover it with chart paper if required
@suhani1446 Жыл бұрын
How much volt led used in project tell us
@nakulsahuart Жыл бұрын
3-5v
@deepthi125d10 күн бұрын
Sir can you please mention the procedure.
@khursadali6813 ай бұрын
I am in class 5th and i am going to make science project
@My_world_5402 ай бұрын
Oh me tooo but in 6th class 😅
@Aadyalife11 ай бұрын
When i am turning on switch all the light are glowing and buzzer is sounding without water.ply help
@nakulsahuart11 ай бұрын
Hope you do the all connection as per circuit, plz cross check according circuit, if possible plz share your project image in Instagram.
@Aadyalife11 ай бұрын
@@nakulsahuart what is your id
@omenagarwal237Ай бұрын
@@Aadyalifeit is in channal descpriction
@Luffy-888 Жыл бұрын
Can we use any type of ohm resistor(220 ohm resistor) plz reply
@nileshamdavdiya6429yt8 ай бұрын
1k
@poonammanav13582 ай бұрын
Sir please tell the working principle of this project
@viaashwinth7567Ай бұрын
Transfer of electricity through water
@Gyan_ka_sajar_Ай бұрын
bro i made the project but when i glow them one by one it glow but in full connection only 1 and 4 is glow why.