Tap to unmute

Water Pump With No Moving Parts? (except water of course)

  Рет қаралды 728,088

Cody'sLab

Cody'sLab

Күн бұрын

I set out to make a pump that operates off thermal energy.
Help me make videos by donating here: / codyslab

Пікірлер: 2 100
@the1exnay
@the1exnay 7 жыл бұрын
Refrigerators use pumps to get a temperature differential- you use a temperature differential to make a pump. The anti-refrigerator
@oliverturner1649
@oliverturner1649 7 жыл бұрын
Underrated comment right here.
@swunt10
@swunt10 7 жыл бұрын
you just described every non electric engine ever.
@oliverturner1649
@oliverturner1649 7 жыл бұрын
How about engines that use a chemical reaction to generate a pressure differential, with the side effect of a temperature differential?
@swunt10
@swunt10 7 жыл бұрын
+Oliver Turner since I know a thing or two about thermodynamics I can tell you they are absolutely equivalent. in fact that's how you would calculate an engine. nobody puts "chemical reaction" into a formula to eg calculate a 4 stroke engine. you put in the heat input and pretend you know nothing else about what's going on. it's called the first law of thermodynamics and you can count yourself lucky if you never have to deal with any of that in your life ever.
@ajaxvarble
@ajaxvarble 7 жыл бұрын
Your describing a Sterling engine
@bottz2
@bottz2 7 жыл бұрын
I love how Cody always shows us the most inefficient, yet coolest ways to do things
@WmSrite-pi8ck
@WmSrite-pi8ck 2 жыл бұрын
It's actually the opposite. It's very efficient to use a thermal gradient from a joules used point of view...
@jek__
@jek__ 4 жыл бұрын
something went very right in cody's upbringing. He sees a thing, and he plays with it, and then once he plays with it, he makes the real version. The willingness and confidence to just do what you want with the world around you without fear or hesitation is admirable
@Systolic_Gaming
@Systolic_Gaming 3 жыл бұрын
Home school probably.
@cordellblaine
@cordellblaine 5 жыл бұрын
I'm glad you explained it on the whiteboard - I was stuck on the "how" it works. Very cool experiment!
@kremit6479
@kremit6479 4 жыл бұрын
Same here.
@Rsa-wy6ve
@Rsa-wy6ve 7 жыл бұрын
A jar full of pennies? really? way to flex on the fans
@LinucNerd
@LinucNerd 6 жыл бұрын
How rude... grr
@radiofrog
@radiofrog 6 жыл бұрын
Yeah I mean dude no need to show off your riches. Geez.
@Londrino
@Londrino 6 жыл бұрын
the pennies are just to hide the $20,000 worth of gold he's actually using as weight.
5 жыл бұрын
Pardon me... *two* jars chucked.
@Enonymouse_
@Enonymouse_ 5 жыл бұрын
Better than a jar full of penises.
@trueblue862
@trueblue862 7 жыл бұрын
That's simply a thermosyphon pump, first time I've seen it put to use like this though. If you used thin copper tubing it should improve the efficiency because it transfers heat much more efficiently. The thermosyphon principle was use on early cars to keep the engine cool before waterpumps became common place, hence the reason early cars had tall radiators. Keep up the good work mate, I'm always an interested in what you will come up with next.
@Hephera
@Hephera 7 жыл бұрын
it operates on the same principle as a thermosyphon but i wouldnt say it is one. this design makes multiple loops of heating and cooling in order to maximise the amount of water pumped through the system, wheras thermosyphons are designed to uniformly heat or cool a volume of water, theyre not specifically for pumping water
@Ny_babs
@Ny_babs 7 жыл бұрын
He is using it on an ecosystem. Copper tubing would kill any phytoplankton cultures. His temperatures with this setup could harm some cultures.
@3nertia
@3nertia 5 жыл бұрын
@@Ny_babs Is it copper's antimicrobial properties that kill phytoplankton or ?
@Ny_babs
@Ny_babs 5 жыл бұрын
3nertia inverts are not equipped to deal with excess copper. The same way humans are not equipped to deal with excess iron.
@trueriver1950
@trueriver1950 5 жыл бұрын
Early domestic central heating systems used thermosyphon. The water would be heated by the kitchen range or by a boiler built into the back of a coal fire. The water would thermo syphon first to a coil heat exchanger in the upstairs hot water tank to heat then round the house visiting radiators before returning to the best source. The advantage of having no need for electricity was likely more significant than having no moving parts (apart from the human shovelling the coal). Next innovation was a pump to feed the radiators, but where the hot water tank was above the heat source there was still no need for that circuit to be pumped. Turning the pump off effectively prioritised hot water over room heating. And finally, a car with an electric fan and electric water pump still uses the thermosyphon effect whenever the pump is off; ditto if it has an electric fan and you remove the water pump (don't do this in hot climate, but useful to speed up engine warm up and small efficiency saving in cold climate)
@UsenameTakenWasTaken
@UsenameTakenWasTaken 7 жыл бұрын
Oh, look. Pennies not being useless.
@maxscott3349
@maxscott3349 5 жыл бұрын
I still want 2 1/2 cent pieces back. Or 1/2 cents. I don't care, I just need that extra half cent of resolution for my transactions.
@diji5071
@diji5071 5 жыл бұрын
@@maxscott3349 Makes cents.
@stanervin6108
@stanervin6108 3 жыл бұрын
SHTF ballast.
@bjarnes.4423
@bjarnes.4423 7 жыл бұрын
You can make the back pipes partially out of metal and put radiators on it, so it has a higher surface area to get rid of the heat
@jusb1066
@jusb1066 7 жыл бұрын
front pipe too, plastic transfers temperature changes very badly
@SoulDelSol
@SoulDelSol 5 жыл бұрын
Exactly a heat exchanger would be metal
@NetRolller3D
@NetRolller3D 7 жыл бұрын
"Over a foot of head." English is such a funny language.
@LordZordid
@LordZordid 5 жыл бұрын
I'll have some of that.
@mustangthekitten7765
@mustangthekitten7765 4 жыл бұрын
Lord Zordid my **** ain’t even that long
@f.riydoff9228
@f.riydoff9228 4 жыл бұрын
@@mustangthekitten7765 better start doin dem keggels, son
@studporkchop
@studporkchop 4 жыл бұрын
That is an engineering term for the displacement of fluid
@isaiaholiphant7175
@isaiaholiphant7175 7 жыл бұрын
Cody just fill the front of your solar heater with water. Like you did with the milk jugs. That would give you the heat transfer that you need to make the system more efficient. You could even do the same to back. The only down side that I can see would be weight, so it definitely wouldn't be something to mount on the roof. Love your videos, keep them coming.
@MrChillerNo1
@MrChillerNo1 7 жыл бұрын
Thank you for making these great videos. I like your cool "just do/try it" attitude. For me you are the epitome of a scientist. keep up the good stuff.
@kindlin
@kindlin 7 жыл бұрын
And, btw, you get the degree to learn how to learn, to set yourself a basis on which to continue a life-long journey of discovery. Just sayin'.
@PaulPaulPaulson
@PaulPaulPaulson 7 жыл бұрын
You should give it a phase shift, because you want heat on the way up and cold water on the way down, but you can only apply heating/cooling over time which is basically the derivation of the temperature. The warmest spot should be somewhere on the front but not all the way at the top so that the warm part does not extend to the backside that much. The loops should be on the back side before they reach the top and they should get back to the front before they reach the bottom. The amount of optimal phase shift depends on how fast the water is moving and how fast the heat is exchanged, so your idea with the heat exchanger should help. Of course, a 90° phase shift (top half in shadow, bottom half in the sun) wouldn't start running because the water wouldnot "know" in which way to flow. But the best value should be much smaller anyways. After all, your heat exchanger might be enough but it's always nice to know about the control engineering theory behind it 😉
@johnsonmay3181
@johnsonmay3181 7 жыл бұрын
What?
@ianwalker6546
@ianwalker6546 7 жыл бұрын
Nice idea - maybe use a slatted shutter (recycled venetian blind?) on the top part to make it a variable effect? Breaks the 'no moving parts' principle though
@YodaWhat
@YodaWhat 7 жыл бұрын
It's not breaking the rule if it's only used in Test Mode, to determine the optimum Phase Shift. After that, no moving the blinds = no cheat.
@samclarke8724
@samclarke8724 7 жыл бұрын
god, great video. really hope we see a sequel were he adds in the common suggestions!
@HalvardSkurve
@HalvardSkurve 7 жыл бұрын
Also put the backside water through metal with cooling fins, being cooled by a solar-powered or wind-powered fan
@PanduPoluan
@PanduPoluan 7 жыл бұрын
I always love your vids, because even if you already had an inkling on how things would likely turn out, you always bring us viewers along for the actual discovery time. Well done, good sir!
@OcelotPwns
@OcelotPwns 7 жыл бұрын
it's so satisfying when you do the math to see what you should expect and it comes out close to what you observe.
@Elric509
@Elric509 7 жыл бұрын
@Cody'sLab Put a chimney on the back of the box, the updraft should cool the tubing well enough, bonus for no moving parts
@DrZoidbergism
@DrZoidbergism 7 жыл бұрын
I have to say i really like that you are using metric units.
@crumblesilkskin
@crumblesilkskin 7 жыл бұрын
DrZoidbergism Yeah because he knows the best way of translating amounts of something and that is why he is the best
@kim15742
@kim15742 7 жыл бұрын
Not consistently
@_Leouch
@_Leouch 7 жыл бұрын
just no one like imperial units :D
@darthclide
@darthclide 7 жыл бұрын
DrZoidbergism I am sure I am not the only one who just converts it to Fahrenheit in my head. Or just knows the freezing and boiling point of water in Celsius and just gets a rough idea how hot or cold something is. I have to say, I am really tired of people trying to look smarter by praising anyone who uses metric.
@sorebutt1
@sorebutt1 7 жыл бұрын
It (metric) is inarguably a more efficient, simple and practical system to learn and use.
@HK-bi2gy
@HK-bi2gy 7 жыл бұрын
i have learned more science from you than i have from several of my science teachers in highschool. please make more videos like this!! your idea you showed on your diagram is real cool
@Fabio.-.
@Fabio.-. 6 жыл бұрын
Same!
@AweOrbital
@AweOrbital 7 жыл бұрын
“Four centimeters of head, it’s not an efficient way to do it, but this does work.”
@G4r0s
@G4r0s 7 жыл бұрын
If you know what I mean
@zacharyhuntsman7310
@zacharyhuntsman7310 7 жыл бұрын
oh
@elihernandez800
@elihernandez800 6 жыл бұрын
In other words, just the tip is fine
@jejcnsjdndjskdjrn8329
@jejcnsjdndjskdjrn8329 5 жыл бұрын
Awe Orbit lol
@stanervin6108
@stanervin6108 3 жыл бұрын
@@elihernandez800 And only till the swelling goes down.
@TheGorphs
@TheGorphs 5 жыл бұрын
We appreciate your effort to use celsius / centigrade and milimiters / centimers here in Europe... Thanks a lot 👍
@timesthree5757
@timesthree5757 5 жыл бұрын
Nope us American don't like it.
@Zyczu55
@Zyczu55 5 жыл бұрын
@@timesthree5757 Imperial units suck because they aren't proportional like mertric system where for example 1l = 1000ml and 1m = 100m because everything is to the power of 10, in imperial you wonder how many inches are foot and foot to yards. So fuck off with your trash units.
@AlexMHardy98
@AlexMHardy98 7 жыл бұрын
Cody I love seeing the same amount of curiosity towards science as I do as a hobby
@technocracynow9339
@technocracynow9339 7 жыл бұрын
Exactly what i was searching for. You are Awesome Cody! Thank you for sharing your Knowledge this is the most important thing a Human can do! Keep Up!
@Bippah
@Bippah 7 жыл бұрын
"This is a result." Today on things you can say about everything!
@GeckoRider94
@GeckoRider94 7 жыл бұрын
Cody, for indoor use make two glass boxes with a peltier device in the middle siliconed into each box, fill with water and win Solar panel optional
@neopunkadelica5434
@neopunkadelica5434 7 жыл бұрын
Cody’s lab is the best channel on youtube in my personal opinion.
@samuelgeorge8524
@samuelgeorge8524 10 ай бұрын
Genius even in 2024 Cody. Just loving going through all your videos!
@alexanderhuff8758
@alexanderhuff8758 7 жыл бұрын
You should make a heat pipe! Like the kind that is used to move heat away from processors on computer. You could use it as a heat exchanger for this, or just do it as a stand alone video. If I remember right they use a sealed copper pipe with water under low pressure on the inside.
@lasersaber
@lasersaber 7 жыл бұрын
Very interesting. Thanks for sharing.
@Pedro-rl8ww
@Pedro-rl8ww 7 жыл бұрын
Hey Cody, I remember you told us that your mercury gravity pump generated considerable ammounts of static electricity, maybe you could somehow transform that project into a generator, it'll be interesting. Upvote if you want Cody to see it :)
@dimitar4y
@dimitar4y 7 жыл бұрын
Huh. Actually. New solar panel design?
@BlazeChronicGreen420
@BlazeChronicGreen420 7 жыл бұрын
Pedro Blasco everyone knows how youtube works quit asking for likes.
@eeesmit
@eeesmit 7 жыл бұрын
Static energy is just high voltage but almost no current. Difficult to use in anything.
@Pedro-rl8ww
@Pedro-rl8ww 7 жыл бұрын
+BlazeChronicGreen420 Sorry, I wasn't really asking for likes... What should I get from that? I just wanted Cody to notice this message and that's the only way I found, since that's how youtube comment system work.
@Pedro-rl8ww
@Pedro-rl8ww 7 жыл бұрын
Maybe there's a way of accumulating the generated current using coils, it doesn't seem easy, but if it works, remember he only changed the mercury containers side by side once every 12 hours or somehing like that, so as an experiment I ind it interesting anyway.
@SilverbladeDagger
@SilverbladeDagger 7 жыл бұрын
Cody, Back when I was in high school (1992-95) I was involved in the Electrathon America project, where schools across the nation would build and race electric powered race cars for an hour, and whoever had the most laps would win. I was the head designer, driver and test driver, and did some of the electrical work on my vocational school's newest car. We ran 2- 12volt car batteries to power a 5.1hp electric motor, on a lightweight chrome-moly tube chassis, and I personally got it up to 50mph before hitting a thermal and power drop off. The main problem we had was the electric motor would get deadly hot, and after I graduated and left the project, someone actually fried the motor. The administrator of the school and supervisor of the project heard that another school tried to use direct application of dry ice to cool their motor, but it ended up seizing it. So I had a solution that I thought would work, but was vetoe'd and I'd like to know what you think about if it would work, since the idea I had is very similar to what you do in this video. First off, I'd put an insulated cooler behind the seat of the car, with a coil of copper tubing with semi-loose coils going from one side to the other at the bottom of it. I would run the ends of the coil through the insulation of the cooler, sealing the holes so it didn't leak, and then do a tight coil around the motor housing. So it would be two coils in a closed loop (also thought of a small DC pump in line), one massive coil in the cooler, one tightly wound around the motor. I would then fill the cooler with ice water and/or dry ice, and fill the copper tubing with water. The idea I was thinking of would be that the heat of the motor would conduct to the copper coil wrapped around it, heating the water. The heated water would push the water in the tubing into the part of the coil in the chilled/cold water, and circulate itself through the closed loop, bringing chilled water back to the motor to exchange temps. So not only would it circulate itself, but would also act like a heat sink to drain heat from the motor. Mind you, the motor temps would easily go over 150F, and I recall it once getting to 195F when you could smell burning varnish. In the end, the administrator freaked out over dry ice being used at all, despite him bringing a cooler full of it on race day. So we made some quick modifications and ended up putting a duct under the car, up through the back to blow directly over the motor. I don't think it did squat to cool things. So the day I raced it, which incidentally was the day of my graduation commencement, it was cool and rainy, I got the car up to 45mph and held second place for most of the race, and then the batteries completely lost juice, and I limped across the finish line at the end of the hour. I think if the motor kept cool, it wouldn't have drawn so much power to the point where the batteries were pretty much done. I wish I had pictures, but imagine a 4 wheeled go kart on BMX wheels, disk brakes, a roll bar, motor in the back linked to the rear axle with a chain, and 2 car batteries behind a sheet metal "seat". So would it be possible for the cooling setup I describe to cool an electric motor like that effectively for 1 hour and not cause a massive draw of amps from the batteries? I'd like to put to bed the idea that it would have worked if the damn knuckle head admin would have listened to me instead of freaking out. Also, it would probably be a good bit of science to demonstrate since it is a very similar idea to what you show in this video.
@chromabotia
@chromabotia 6 жыл бұрын
Cool Cody... I like the way that you take things from first principles in your projects
@KikinCh1kin
@KikinCh1kin 6 жыл бұрын
I imagine his neighbors are always like "wtf is that kid doing this time first he gassed us and now hes wrapping coils around things. I dont like it"
@dansw0rkshop
@dansw0rkshop 7 жыл бұрын
Solar distillation (evaporation at the bottom, condensation at the top) might actually work faster, where you have air convection moving the water, as vapor, from the bottom to the top.
@jasonharrison25
@jasonharrison25 7 жыл бұрын
dansw0rkshop the problem with this is he is also trying to move the salt in the water too
@kindlin
@kindlin 7 жыл бұрын
Or the blue food coloring.
@dallebull
@dallebull 7 жыл бұрын
Celsius and Centimeters
@jimwilliams1536
@jimwilliams1536 7 жыл бұрын
A tiny Fresnel lens would allow you focus light (for miniaturisation), could make the pump more sensitive in lower light conditions.
@anthonyfeatherstone7696
@anthonyfeatherstone7696 7 жыл бұрын
You sir are smarter than the average person. I wish more people were like you instead of trolling social media and worrying about dumb shit
@mortlet5180
@mortlet5180 7 жыл бұрын
How about using the pressure developed by the heating, to inject air (as bubbles) into a cavity, similar to how a "geyser pulse pump" (which is a type of air lift pump) works. It should be a MUCH more efficient use of the available heat differential, while still retaining the no moving parts advantage.
@zachburke8906
@zachburke8906 7 жыл бұрын
MRLT that's an insanely awesome idea.
@haroldoliver
@haroldoliver 7 жыл бұрын
That is what my Mister Coffee machine does. More or less like the old percolator pots did except it is single pass instead of doing the same liquid over and over.
@sakmannakki7294
@sakmannakki7294 7 жыл бұрын
"A foot of head" *Damn*
@ishdeath1950
@ishdeath1950 7 жыл бұрын
I thought the same thing lol
@seigeengine
@seigeengine 7 жыл бұрын
I tried, but then I realized there's no way to interpret that that makes any actual sense.
@Gdsmith504
@Gdsmith504 7 жыл бұрын
1 foot of head makes sense. It is .433 psi or the weight of a 1"X1"x 1 foot column of water. It therefore show how much lift the pump has. It can raise the water by 1 foot. It's equal to about 3 kpa.
@evanthedude8567
@evanthedude8567 7 жыл бұрын
Gdsmith504 they were talking about HEAD as in a SUCC OF THE DICC
@Gdsmith504
@Gdsmith504 7 жыл бұрын
Evan The dude I was aware of that. How they related a video on science into a comment on fellatio is just a reflection of sophomoric humor.
@mikecorleone6797
@mikecorleone6797 5 жыл бұрын
“I should be able to get about a foot of head” that’s what she said
@Xhopp3r
@Xhopp3r 4 жыл бұрын
Loved it. I have been thinking about moving water from lower ground to higher ground without pumps - off and on - ever since I read about heron's fountain. I had a discussion with a friend of mine who goes to MIT about the fountain. He said the physics wouldn't allow it to work, and I agreed with him. However I asked him if it was possible to use physics to beat physics and make it work. His answer was no. I believe you have done just that. While many people look at heron's fountain as a perpetual motion machine, I don't care about that. I just care about going from lower to higher ground overcoming the force of gravity using just physics, and nature. I absolutely loved this video.
@sorna94
@sorna94 4 жыл бұрын
i passed high school maths because the teacher liked me, i have no idea what you are talking about half the time, yet i have followed you for yeears. never change cody
@firstlast-cs6eg
@firstlast-cs6eg 5 жыл бұрын
. There are a few aspects of this I don't understand. But I think I understand most of the important parts. I have a few suggestions that look very good to me. Use metal tubing. Metal is more thermal conductive and could take higher temperature, you could paint it black on the side facing the sun. Around this metal tubing build a hot box. reflective like iron or aluminum foil? (Not black, thus the light hits the water twice and doesn't heat the back side as much) material that curves concavely inwards focusing the light and thus heat on the tubs. Maybe metal around the one side also that it could hold more heat and heat up. The glass would also curve acting like a magnifying glass on the tubes. Then good insulation between the front and the back side. The net effect should make one side considerably hotter, making for a much greater temperature differential and you'd use less tubing, more of the surface area would be focusing the heat thus less water to move and thus taking less energy to move it. On the back side, the tubs (still metal would be some distance away from the surface) could have a wind fan. Put a fan on a high poll above any obstacles to wind, like surrounding houses, trees etc. Connect it via belt to another fan blowing below the device pushing the heat away. (top fan is turned by wind, bottom fan is turned by the top fan) Alternatively the whole thing could be high up capturing more sun and wind, like your roof. Would it still work if it was all horizontal? Because horizontal on the roof would maximize the amount of light caught for the longest period of time. Please let me know if you've read this. I know this video is like a year and a half old or something, do you read comments of old videos? If someone else reads this, how might one send a message like this so that Cody might read it?
@Papperlapappmaul
@Papperlapappmaul 7 жыл бұрын
Heat pipes might be able to increase the efficiency of your contraption considerably as they allow you to transfer thermal energy between two points quite easily. BTW: The >1M subscriber disease seems to have infected your channel. Only one of the first 26 comments wasn't pure cancer but actually related to the video. (Thank you, "Andy's Videos")
@chabis
@chabis 7 жыл бұрын
You mean the copper pipes? Might be worth a try. At least that stuff can be scrapped from all sorts of radiators, I guess. Like the ones in cars or in fridges.
@MikeOxolong
@MikeOxolong 7 жыл бұрын
"Does it really pump water?" It is a water pump, which is supposed to pump water. In the video, you can see it pumping water. How is this a good, or not "cancer" question related to the video?
@chabis
@chabis 7 жыл бұрын
Zachary Nolting You mean the result is basically zeroing itself out?
@Papperlapappmaul
@Papperlapappmaul 7 жыл бұрын
Heat pipes aren't just straight up copper tubes. The magic happens inside of them. If my memory serves me right there's some kind of capillary action going on in these things. If the pipe is connected to two fairly conductive points on each end and insulated in the middle, they pretty much move the heat from one point to the other without much loss.
@SpartanMJO12
@SpartanMJO12 7 жыл бұрын
swiss quite right. A break anywhere in the line and they stop working. Plus I'd imagine it's quite hard to source that much heat pipe.
@GiveAcademy
@GiveAcademy 7 жыл бұрын
Works like a modern coffee pot. :)
@jimmybobhere
@jimmybobhere 7 жыл бұрын
A drip coffee maker has no moving parts. Water is heated, rises up a tube, then cascades down over aromatic coffee grounds. This temperature differential pump seems to use a similar principle. Good video!
@vincentcathelineau1058
@vincentcathelineau1058 5 жыл бұрын
Cody, this is very close to the concept of the fluidyne pump, maybe somebody told you that already. Only in a fluidyne pump, you use an air tight top on your u shape with some air in it and this air tightness added with the heat provided on one side will start making the water oscillate at a high pace. Then, you can pump up to 20 feet. The thing is, research has so far proven you can transfer only about 5% of the heat energy into actual mgh energy due to pumped water. Say you wanted to produce electricity this way by making a micro pumped hydro plant yourself. You would need basins, pumps of this type of a really fair size, tubes, a turbine and a lot of square meters of thermal solar panels. 50hz or 60hz AC is achievable by turning the turbine on when the top basin is full enough. 24h electricity production can be achieved through hot water storage. You will need at least 4 times more surface in thermal solar panels than you would need in PV, and even more so if you want to store energy for the night, but this type of installation is feasible on a DIY scale. Toughest part being the turbine, which i'd buy. FYI, fluidyne pumps are only another type of stirling engine.
@oddryan8896
@oddryan8896 7 жыл бұрын
Can you run half the hose under ground?
@RoyceBarber
@RoyceBarber 7 жыл бұрын
That's a superb idea Ryan. For heat we just need mirrors, and for cooling we need thin bright tubes or a metal which transfers a lot of heat. Running the lines into a dark box insulated with KaoWool (amazing insulation) would be good, filled with water would also be good, and great if the water were evaporating, but the best is as you said...having the lines covered over with dirt. So no matter how hot the lines get, the ground would still cool them off fast.
@fundamentally2615
@fundamentally2615 7 жыл бұрын
Hmm one problem is that the cooling should be primarily on the back, not the bottom, and the pump needs to remain upright. Maybe pile up dirt behind it? Of course that doesn't really work with putting it in his shrimp boxes.
@Zalied
@Zalied 7 жыл бұрын
dirt on the back would definitly help cool it and using mirrors to focus more light gives more heat. this could help give a bigger temp differential without adding much complexity
@oddryan8896
@oddryan8896 7 жыл бұрын
Fundamentally i don+ think it would matter to much if it was horizontal rather then vertical, as long as the sun hits the episode side for a good portion of the day
@fundamentally2615
@fundamentally2615 7 жыл бұрын
Odd Ryan Think of it this way: The water on the cold side is heavier than that on the hot side, due to their difference in density. Let's say you're looking at it from the side so that the cold water is on your right and the hot is on your left. Since the water is heavier on the right, all the water will rotate clockwise, with the heavier (cold) water moving toward the bottom. If we start out with the cold water on the bottom, the system would already be in equalibarium, and the water would have no reason to move. Hopefully that made sense haha.
@littlebacchus216
@littlebacchus216 7 жыл бұрын
In a lot of vids we get the "we'll wait for that to settle out" ever thought about making a super skookum centrifuge?
@JoceAC
@JoceAC 7 жыл бұрын
Do refining of calcium from bones next plz.
@danieltrevena3117
@danieltrevena3117 7 жыл бұрын
Vaibhav Bisht that actually sounds pretty cool
@cyrosgold7
@cyrosgold7 7 жыл бұрын
That's easy~ish, you can get calcium from bones by dissolving in acid then neutralizing the acid to precipitate the calcium compounds, Calcium Phosphate. But refining those compounds for pure calcium is another matter. He would have to separate the Calcium Chloride from the Dissolved bone solution, evaporate it down to a solid salt, and then heat the salt to a molten state and do some electricity based shenanigans. Pretty dangerous stuff, but he would have metallic calcium.
@shurdi3
@shurdi3 7 жыл бұрын
Spooky
@radarpinki
@radarpinki 7 жыл бұрын
dissolve a skeleton and a trumpet for halloween
@Guggz
@Guggz 7 жыл бұрын
"Hey everyone, Cody here. So I took a trip to my local cemetery"
@ala4857
@ala4857 6 жыл бұрын
I am not sure what I just watched but this was the best sky cloud time lapse video ever
@kajallison8896
@kajallison8896 7 жыл бұрын
Cody your such a smart guy. props to you dude.
@tsumui
@tsumui 7 жыл бұрын
Hey Cody, Is there any reason not to set up your pump in parallel rather than in series? If all of your columns are in parallel, that would eliminate the need for some kind of complicated heat exchange system.
@jasonharrison25
@jasonharrison25 7 жыл бұрын
tsumui it would increase volume but not pressure. he is looking for a way to increase the pressure
@st0rmforce
@st0rmforce 7 жыл бұрын
I thought the same thing, but Jason's right. Each loop in series increases the difference in water level between one end and the other. If they were linked up in parallel, they'd move more water per minute, but only by the height-difference of one loop (just over a millimetre).
@tusharagrawal5479
@tusharagrawal5479 7 жыл бұрын
for greater temperature diffrential you could try focusing sunlight with help of convex lens
@vincentrobinette1507
@vincentrobinette1507 5 жыл бұрын
Or, perhaps, with a Fresnel lens.
@scotthuftel2358
@scotthuftel2358 5 жыл бұрын
Wouldn't either of those have a chance of burning plastic
@wikedawsom
@wikedawsom 5 жыл бұрын
@@scotthuftel2358 depends on how tight the focal point is
@lexiecrewther7038
@lexiecrewther7038 4 жыл бұрын
Better to use copper pipe painted black. The problem is not with generating heat, but with transferring it to the water
@SmokeyEdits
@SmokeyEdits 7 жыл бұрын
Good god Cody, it's almost 7am. Go to bed.
@theCodyReeder
@theCodyReeder 7 жыл бұрын
Its 5am here
@camdenv1427
@camdenv1427 7 жыл бұрын
Smokey Jef 4 am here!
@J_rusty712
@J_rusty712 7 жыл бұрын
I want sleep
@SmokeyEdits
@SmokeyEdits 7 жыл бұрын
To be fair, I fell asleep from 2am to 6am. I thought I was wasting my time when I refreshed my subscriptions feed until this popped up with "one minute ago".
@FAB1150
@FAB1150 7 жыл бұрын
Almost 1.30 pm here .-.
@TheScaryName
@TheScaryName 7 жыл бұрын
I absolutely love that you're using metric.
@WatermelonBMX
@WatermelonBMX 7 жыл бұрын
I love this channel, always watching it before bed
@rorolonglegs4594
@rorolonglegs4594 7 жыл бұрын
teacher: soo what do you want to become when you grow up me: a cody teacher: ...
@RustyShackelford6
@RustyShackelford6 4 жыл бұрын
Gay
@DioD3
@DioD3 7 жыл бұрын
Isnt this extremely inefficient?
@caracaes
@caracaes 7 жыл бұрын
DioD3 it is useful for taking advantage of residual heat or solar. since it has no moving parts it requires less maintenance and it makes no noise. the design can be improved to be more efficient
@st0rmforce
@st0rmforce 7 жыл бұрын
He said in the video that a solar panel and electric pump would be able to move the whole jar of water to the top of the electricity pole in a couple of seconds. Yes. It's inefficient.
@calvingreene90
@calvingreene90 7 жыл бұрын
Yes but if made from say glass or platinum it would still be working in a thousand years if not broken by an external force unlike the efficient pumps that would wear out in a few decades at most.
@st0rmforce
@st0rmforce 7 жыл бұрын
But how much water would be pumped in that time though?
@calvingreene90
@calvingreene90 7 жыл бұрын
It depends on pipe diameter and temperature differential. Using an electric immersion cup heater and a 2" pipe I was getting a couple liters a minutes at a 3mm lift without misusing the heater.
@8b8b8b
@8b8b8b 5 жыл бұрын
Car With No Moving Parts? (except car of course)
@bibasik7
@bibasik7 5 жыл бұрын
Ever heard of hills?
@8b8b8b
@8b8b8b 5 жыл бұрын
Hills, No Wheels
@sawyer3818
@sawyer3818 5 жыл бұрын
Electric cars have less moving parts but some parts still move. Like wheels
@dariondavis2488
@dariondavis2488 5 жыл бұрын
Fred flintstone did it
@ZoeSoutter
@ZoeSoutter 5 жыл бұрын
rocket sled?
@FunkFPV
@FunkFPV 7 жыл бұрын
Wouldn't 2 connected coils, 1 in hot and 1 in cold be better?
@mcmurm11
@mcmurm11 7 жыл бұрын
Cody, your neighbors must be patient and understanding folks.
@viniciuslambardozzi4358
@viniciuslambardozzi4358 5 жыл бұрын
Ok so I'm just as amazed by the fact you can leave everything outside, including the camera with no worries and it wasn't: stolen, destroyed, stolen and destroyed. 3rd world sucks man.
@johnbuck5181
@johnbuck5181 5 жыл бұрын
Damn straight, I love living around white people.
5 жыл бұрын
@@johnbuck5181 Yeah. This certainly wouldn't last in more "culturally enriched" areas.
@wakefieldallan
@wakefieldallan 5 жыл бұрын
But diversity is our strength... funny thing though. While inwas typing that dumb one liner, when went to type strength my phone suggested money... so I think my phone is right. Diversity is (the lefts) money...
@MatFig
@MatFig 5 жыл бұрын
White country / White neighborhoods
@marcinraczkowski3267
@marcinraczkowski3267 5 жыл бұрын
@@johnbuck5181 I live in probably most white country in EU right now, and the camera woud not last half an hour. So quit your racist bullshit
@HeirloomReviews
@HeirloomReviews 7 жыл бұрын
CODY DO A VIDEO ON A HYDRAULIC RAM PUMP. I STILL DONT UNDERSTAND HOW THEY WROK!
@ruforufo2185
@ruforufo2185 7 жыл бұрын
yeah, that would be cool.
@paaaaaaaaq
@paaaaaaaaq 7 жыл бұрын
ask AvE
@jasonharrison25
@jasonharrison25 7 жыл бұрын
they work by the water hammer effect. the momentum of the fast moving water and a closing check valve causes a spike in pressure ( water hammer) this pressure is trapped on one side of the pump with a check valve. the pressure causes the water to be able to pump to a higher level then the supply water but with a sacrifice of less volume. would still be fun to see Cody make one though
@theCodyReeder
@theCodyReeder 7 жыл бұрын
hee ya go! kzbin.info/www/bejne/mJiop4F5m6mtsNU
@laamatoro2684
@laamatoro2684 7 жыл бұрын
its simple momentum, using the energy of flowing water. Just the same as a 1kg weight on earth sitting still pushes down with 1kg, but if you let it move quickly(drop it from some elevation) and try to stop it in a short space you will find it generates much more than 1kg of force for that short distance. Set a hammer on a nail and nothing, move the hammer quickly and then stop it with the nail and the force is high enough to push the nail into wood, actually about the same peak force that a hydraulic press would need to slowly push the nail into the wood. Energy over distance.
@ALegitimateYoutuber
@ALegitimateYoutuber 7 жыл бұрын
if static electricity can attract water why not use something along that idea. Thus create a static force around the tube that can be toggled on and off, and have it operate similar to a coilgun. That should be more effective and also allow to to teach and show off a few more things. Plus it also maybe possibly wont have any moving parts as well.
@almorlina
@almorlina 6 жыл бұрын
I saw a super fluidics demo of that. Actually no moving parts could work for his application.
@ancapftw9113
@ancapftw9113 5 жыл бұрын
I was thinking something similar. Magnetic hydrodynamic pump. Works well on salt water.
@CraneArmy
@CraneArmy 7 жыл бұрын
Hi Cody. I'm not sure if this idea would meet your criteria, but you could shrink the pump a ton if you are willing to let a little water boil. If you used a small solar concentrator (either a lens or a mirror) to heat up a reservoir you could push a relatively large amount of water through a capillary tube in a few minutes just like pushing a piston in a steam engine. You might also have some control over when it is circulated by adjusting the positions of the solar concentrator and reservoir. You might control the amount of water to be circulated by adjusting the length of the capillary tube. Your brine shrimp colonies are coming along great. Keep making videos!
@BrianPhillipsRC
@BrianPhillipsRC 7 жыл бұрын
cool test
@jacklleb7785
@jacklleb7785 7 жыл бұрын
Is this going to be a new series? I'd personally like it to be called : inventions with cody
@silasmayes7954
@silasmayes7954 5 жыл бұрын
Radiators could help cool the water drastically to help with efficiency
@Shepard_AU
@Shepard_AU 7 жыл бұрын
Can anyone guess how many pennies are in each jar?
@edgarvilar2128
@edgarvilar2128 7 жыл бұрын
Gmanmovies09 Hum... 14?
@cyrosgold7
@cyrosgold7 7 жыл бұрын
About 650 aka $6.50 Assuming those are 16 oz jars.
@VaidasKondratas
@VaidasKondratas 7 жыл бұрын
at least 2
@Audio_Simon
@Audio_Simon 7 жыл бұрын
+Cody'sLab Yep if we all guess and then take the average it should be very accurate. Cody should mention it in his next video. I'll guess 500 each jar.
@kewakl8891
@kewakl8891 7 жыл бұрын
~1200
@pierre5325
@pierre5325 7 жыл бұрын
Friend Cody, just to say, Thou Rocketh! Thanks again for a great learning experience. pierre de Nuevo Mejico
@nathanjones7250
@nathanjones7250 5 жыл бұрын
Maybe take the feed reservoir out of the hot sun and start with cold water . ? Place it just below the top of the tubes and reduce the hight of the tubes by increments so that its siphoning more and pumping less ? Pull it to the final push ? Use a rifled tube to enhance the fluid dynamics and rate of flow. Taper it from broad at the begining of down flow to narrow at the top of the up. More volume in the shade to cool faster and add mass to the down cycle of the down / up balance . ( or one long tesla valve with two chambers ? ) picture two tesla valves in a tube styled like a dna strand. . I enjoyed your video. Thank you. There is a quote somewhere by someone that says ' would the person who says its impossible shut up and let the person actually doing it get on with doing it . I like your style . Dont wait around for the perfect pen to be delivered so that you can draw the pencils on your table . 😉 when people say it isnt an efficient way of doing something i always ask them if its more efficent than not doing it at all. Your pump is 100% efficient. It pumps 100% more water than a pile of parts .
@minecrafter0505
@minecrafter0505 7 жыл бұрын
Wouldn't a system with a winding wire in the back and then a winding wire in the front work better? It would simulate a long pipe in cold and a long pipe in heat and would spare the large number of temperature changes.
@Crazy_Diamond_75
@Crazy_Diamond_75 7 жыл бұрын
Unfortunately... no. Every turn in the pipe has to have a corresponding temperature change. Otherwise the two sides of the turn will cancel each other out. Simplify it down to his original example with one bend and a length of pipe on either side. If both sides are warm then there's no height differential between them. If you were then to chain a bunch of those together everything will cancel out and you won't have any head at all.
@LunaticCharade
@LunaticCharade 7 жыл бұрын
No, but; a horizontal loop for cooling at the top/heating at the bottom would be a great idea, allowing the vertical columns to be the right temp!
@MikeOxolong
@MikeOxolong 7 жыл бұрын
Cheeseburger is a hamburger topped with cheese.
@wantedpwner
@wantedpwner 7 жыл бұрын
Or unmake... O_o
@drewlovli7299
@drewlovli7299 7 жыл бұрын
Nah he should Make concentrated dark matter
@MikeOxolong
@MikeOxolong 7 жыл бұрын
Yeah, I would like to see him making superfluid helium.
@MikeOxolong
@MikeOxolong 7 жыл бұрын
chbrules How do you make antimatter?
@trolllol7264
@trolllol7264 7 жыл бұрын
Yeah
@radicalxedward8047
@radicalxedward8047 5 жыл бұрын
I don’t get why people without nearby water in Africa don’t make simple stuff like this or even just a really long siphon with an elevated water container at the source and a bunch of tubing back to the village or whatever. This specifically would probably be far too inefficient but a really long tube would still carry the water for them.
@BigMuskachini
@BigMuskachini 5 жыл бұрын
because they have an average iq of 75
@Aurelleah
@Aurelleah 5 жыл бұрын
@@BigMuskachini Intelligence has absolutely zero to do with learned knowledge. We have more education than them but you can rest assured there's plenty of africans who are more intelligent than you are
@tahvohck
@tahvohck 5 жыл бұрын
@@Aurelleah Probably a lot of africans more intelligent, based on that comment. Some of the low-power, high-reliability stuff coming out of that region is insane.
@Aurelleah
@Aurelleah 5 жыл бұрын
@@tahvohck ye for real
@luct3368
@luct3368 5 жыл бұрын
unforunately the local warlord will probably pile through, or some IQ 60 person to trash it. It only takes 1 idiot to destroy a genious' life time of work
@RunninBird
@RunninBird 7 жыл бұрын
I wonder if this could be used to make a reasonably functional self-circulating solar hot water pre-heater/heater.
@PatrickMHoey
@PatrickMHoey 7 жыл бұрын
Our guy Cody has leveled up!
@keitjan
@keitjan 7 жыл бұрын
interesting, make a nuclear reactor next time
@acorgiwithacrown467
@acorgiwithacrown467 7 жыл бұрын
kei nuclear reactors are easy ._.
@hollowsoulreaper7251
@hollowsoulreaper7251 7 жыл бұрын
He does actually plan on making a nuclear reactor. Or at least did.
@robschultz4647
@robschultz4647 7 жыл бұрын
I'm on to you north korea.....
@1904pokemon
@1904pokemon 7 жыл бұрын
HollowSoulReaper he wanted to make a fission reactor or something he has tritium
@neopalm2050
@neopalm2050 7 жыл бұрын
tritium is used for fusion. Not fission.
@eduardocarus4482
@eduardocarus4482 7 жыл бұрын
You should do a patent of your pump
@JasonGroom
@JasonGroom 7 жыл бұрын
I am betting the thermosiphon has already had one filed a long time ago.
@Jadinandrews
@Jadinandrews 6 жыл бұрын
Pretty sure it will be hard to patent a solar water heater.
@jacobopstad5483
@jacobopstad5483 5 жыл бұрын
There's got to be a way to put a Tesla valve in there and make it more efficient...
@PandemoniumMeltDown
@PandemoniumMeltDown 4 жыл бұрын
I mean the video, I watch all of it then would lick my eyes as they were fingers for if fingers could see, that'd make them videos fingerlickingood. But once at the end, you sir are one of the few that makes me stick till the last second for your anthem is so darn good.
@n8rtotplayz647
@n8rtotplayz647 5 жыл бұрын
Put multiple loops inside that come out the top and then loops on the shady side to radiate away heat. Rather than plastic tubing Copper has better thermal conductivity and higher pressure capacity, perhaps a heat sink attached to the loops on the back to help radiate the heat back into your box or into the atmosphere. A check alive to stop r𝗲𝘃𝗲𝗿𝘀𝗲 flow as the sun goes away. More volume could be achieved with a lager diameter. Simpler perhaps than each loop entering and exiting the box on each circuit, this seems like it would inhibit efficiency over all.
@EmmadCheema-gv6iu
@EmmadCheema-gv6iu 5 жыл бұрын
Cody: uses metric system Americans: Mind blown
@innerclass1509
@innerclass1509 7 жыл бұрын
Pump didn't work well, despite the fact that the water bottle placement was right on the money.
@impelcrato9258
@impelcrato9258 7 жыл бұрын
Menead Saward pun heavily intended
@st0rmforce
@st0rmforce 7 жыл бұрын
Menead Saward Get out
@Z4G.
@Z4G. 7 жыл бұрын
Get the FUCK OUT!!!
@andregon4366
@andregon4366 7 жыл бұрын
Everything has moving parts that wear out with time. They're called Homo Sapiens.
@That0Homeless0Guy
@That0Homeless0Guy 6 жыл бұрын
We actually used to use something like this in ponds. But we used a horizontal coil in the pond and another just above the surface and backed it like you with a black panel. It was simply to generate a little water flow during the summer as the ponds would stagnate in the heat once algae blooms kicked in. My dad knows the exact technique I think but I think I could work it out with a few hunded dollars of pipe.
@hogsandstews
@hogsandstews 2 жыл бұрын
His excited giggle when he realizes his invention works (but not perfectly) makes me smile
@okabee1505
@okabee1505 7 жыл бұрын
Um excuse me, it's water of color not colored water
@st0rmforce
@st0rmforce 7 жыл бұрын
10 points to squabble-dor
@tedbundy367
@tedbundy367 6 жыл бұрын
froz1983 it's Fros not Froz
@pubcollize
@pubcollize 6 жыл бұрын
Cyano-American water
@leegato282
@leegato282 6 жыл бұрын
froz1983 depends which side of the pond you're from. KZbin is global, after all.
@Stropitor
@Stropitor 7 жыл бұрын
You changed the title
@theCodyReeder
@theCodyReeder 7 жыл бұрын
Several times... still dont look right.
@Stan_Tarka
@Stan_Tarka 7 жыл бұрын
Cody'sLab if you take away the question mark it looks good enough for me
@rkan2
@rkan2 7 жыл бұрын
"Making a water pump with only water as moving parts"?
@kateonianlaw1127
@kateonianlaw1127 7 жыл бұрын
Perhaps you could just call it a "Heat Gradient Water Pump" or something like that. Still will get you no results Googling it, but the title sounds more interesting.
@nipnipnip7508
@nipnipnip7508 7 жыл бұрын
Non mechanical water pump
@anernits
@anernits 7 жыл бұрын
Sorry cody, It isn't really new. It's calles a thermosiphon. That's how solar water heaters work basicly. A water tank is plased above a heat box, where copper pipes run through. The sun heats the water in the pipes, warm water rise to the tank while cooler water replace them below. They're very common here in Israel.
@peetiegonzalez1845
@peetiegonzalez1845 7 жыл бұрын
Nothing Cody does is new. He's demonstrating things for the rest of us. We don't all share the same experiences.
@hanvyj2
@hanvyj2 7 жыл бұрын
I knew thermal heating was common, didn't know it used the heat to circulate the water though. Assumed it was pumped. Really cool.
@JohnnyKronaz
@JohnnyKronaz 7 жыл бұрын
No one said it was new. Where in the video did he say he invented a new technique?
@areyouserious4223
@areyouserious4223 7 жыл бұрын
I won't search it for you. Just pay attention on what he says. He speculated to maybe have invented it after not finding it with a Google search.
@trickyspider7080
@trickyspider7080 6 жыл бұрын
Kronaz邪児 very beginning he said he’s trying to invent a new pump
@THARUNKUMARVK
@THARUNKUMARVK 7 жыл бұрын
You could use expanded gas(from heating though) to push water upwards to a higher level just because air expands more than water when heated. It takes very less energy to heat and cool air instead of water.
@MineJarok
@MineJarok 7 жыл бұрын
Your Intros are awesome. So creative
@gantmj
@gantmj 5 жыл бұрын
I have no idea what's going on as I only speak freedom units.
@Nakilon
@Nakilon 7 жыл бұрын
Dude, I believe having multiple loops of tube is the same as having one in this setup. You put the tube in cold water and then warm but then again cold -- that looks wrong to me. Make multiple loops through one canister and then multiple through the other: 1 1 1 1 1 2 2 2 2 2, not the 1 2 1 2 1 2 1 2 1 2
@lawrencemaroun3310
@lawrencemaroun3310 7 жыл бұрын
I'm thinking he should only have one cold loop and many on the warm side. The pressure in the system will be the same, and there will be more distance of warm water to expand.
@LunaticCharade
@LunaticCharade 7 жыл бұрын
No, you need to heat and cool the water each loop, otherwise the stacked loops cancel out and only gives the effect of one hot or cold loop
@chrismofer
@chrismofer 6 жыл бұрын
this is a tried and true pump called a thermosiphon, lots of good science already done on the concept.
@RoyceBarber
@RoyceBarber 7 жыл бұрын
You invented an early Solar Thermal Difference Fluid Pump. We need a cool name for it though. Solar Pump. Something like that. Very cool! When your design is a bit more polished, I'd LOVE to build one of these. I'm no scientist, but I like to build tiny versions of some of the things you build. But for this I'd go massive scale. Sounds like a copper heat synch of some sort, or copper pipe in the shadow, may be good for the cooling areas, with a certain amount of fluid dribbling over the copper for further heat removal. Not to over complicate it. XD But thank you for the ideas Cody. Now to watch the last bit of the video.
@morganphillips8609
@morganphillips8609 7 жыл бұрын
cody's way of counting 1,2,3,4,5,6,7,9,10,11,12,13,14,15,16,17,19
@dafuqisdis6008
@dafuqisdis6008 7 жыл бұрын
I'm really glad you use the metric system
@Speeder84XL
@Speeder84XL 7 жыл бұрын
Really cool! You're turning heat into potential energy basically.
@andrewm6329
@andrewm6329 4 жыл бұрын
Thank you for teaching Americans about the metric system! :)
@reina4969
@reina4969 6 жыл бұрын
This has to one of my favorite videos of yours. I want to see this in action inside your aquariums!
@zetacon4
@zetacon4 5 жыл бұрын
Most intriguing. I love seeing how force can be multiplied. This idea has some very fascinating possibilities. Careful thermal differentials would need to be observed. But, the potential is there.
@xylenox6112
@xylenox6112 5 жыл бұрын
It's not multiplied, though, unless I'm mistaken.
@travishanson166
@travishanson166 5 жыл бұрын
Same thing in an ammonia/propane refrigerator. Cap the two vessels and plumb a tube between the air space to profit from vapor pressure differences. Keep one vessel cooler than the other . You could possibly try a reed valve somewhere to produce hammering to increase flow rate possibly. I've pondered similar ideas for connecting stock tanks together and using a geo thermal loop to keep them flowing, one to another to keep the water warmer than freezing in the winter, and cooler in the summer.
Compress Air with No Moving Parts! - Trompe
8:50
Practical Engineering
Рет қаралды 2,5 МЛН
Sprengel Vacuum Pump: The most efficient vacuum pump ever?
20:18
Cody'sLab
Рет қаралды 1,5 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
Will Gauge Blocks Stick In Vacuum?
15:47
Cody'sLab
Рет қаралды 608 М.
Cody’s Carboniferous Terarium
19:19
Cody'sLab
Рет қаралды 881 М.
Mining Magnetite
16:20
Cody'sLab
Рет қаралды 1,1 МЛН
Cody's Methane Generator Part 1: Putting it Together
14:16
Cody'sLab
Рет қаралды 822 М.
The Viral Home That Beat the Wildfire: Here’s How It Survived
17:56
BYoung Design
Рет қаралды 139 М.
HHO Generator - Water to Fuel Converter
9:12
TKOR
Рет қаралды 12 МЛН
Sodium Water Hybrid Rocket?
33:00
Cody'sLab
Рет қаралды 977 М.
Concentrating Dilute Nitric Acid
10:12
Tony's Pastimes
Рет қаралды 944
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН