Watercooled, Overclocked SERVER Build!

[@1FelixxileF1]

*drills in a rad, punctures the tube, seals it back up with epoxy, has the glorious idea of just using double-sided tape, finds another rad, drills in this one as well* classic

[@FodrMichalych]

After this video my face is watercooled by the sweat.

[@tiavor]

I got panic attacks by looking at his drilling tech, doesn't he have some kind of metal plate to stick in there?

[@subterficial]

Arguably still better than the time he didn't want to wait for mounts for the 22 core Xeon, so he removed the socket bracket and zip tied the cooler to the motherboard.

[@CheesyMcBeard]

I got panic attacks he drilling into metal without goggles.

[@BillPairaktaridis]

Jesus, why not go out and buy another radiator?

[@deadbeef7553]

6:59 "because i CANNOT risk a leak..." 10:14 - fixes punctured radiator with epoxy

[@Verpal]

I proba4 just flex/Teflon tape it, gotta give the man credit.

[@AngelaTheSephira]

@@Verpal F L E X T A P E

[@AurumFaber]

Woken in a nutshell

[@rice9221]

I'm ready for the 15 part series: whole server room water cooling

[@phreapersoonlijk]

Not again !!

[@TobyCowles]

rice9221 can't wait!

[@TheKtm300rider]

everyone upvote this so it happens

[@anghellic7982]

rice9221 only if they lea4ned there lesson from last time

[@b10s]

*WWW - Whole Warehouse Watercooling

[@EclecticResearch]

Put the ghetto watercooled server on top of racks, on top of racks, on top of all of your data. I see no problems here.

[@Kramer7969]

Has make sure there are no leaks because this will be above the petabyte server. Stay tuned for "Repairing the water damaged petabyte server"

[@Wayne-fe1ed]

lol.

[@nothingiamjustsomekindofdu5744]

didn't age

[@derchesten]

"I AM TAKING NO RISKS OF LEAKING" proceeds to drill into the rad, seals it with epoxy and calls it a day

[@michaelneal2062]

derchesten I was going to comment the same thing but checked to see if anyone else had

[@derchesten]

I did as well, but got tired after like 15 comments, following the guidance of guru linus of the epoxy seals

[@ichabaudcraine2923]

TheMiningWaffle Same.

[@donnyboi1990]

If a cars radiator is leaking from a huge gouge and JB Weld can stop it I'm sure he's fine

[@the3rdid485]

Calls it a day? He swapped out to a new radiator that wasn't drilled through lol.

[@shepherdpiers]

Its the honesty in Linus' videos that keep me coming back.

[@GodlikeIridium]

After killing a rad by drilling trough it: "I could have used double sided tape instead of drilling" Shortly later, with a new rad: *drilling again* 😂

[@hanfyren7961]

Ricardo Pesenti Not so rad

[@MaksKCS]

Ricardo Pesenti Because he already had holes in the case.

[@TheRicheg]

Whare was the pillar drill when you need it oh yeah and the breathing space for that rad.....

[@raylopez99]

@9:25 is where that happens. It's good to have sponsors when you are a klutz like Linus is...free stuff comes in the mail all the time I suppose.

[@snoodballla9632]

love tap

[@telefon72]

Im calling it now, it will leak on the 1 petabyte server.

[@9998-d6n]

karlpc200 lol so true. Then we will get petabyte server drive recover part 100000

[@telefon72]

Indeed

[@Rakku]

Tbh, if they are so stupid to watercool (unneeded actually) a server in a rack and endanger the whole server rack with being flooded, they deserve it. They arent new to electronics, but as time goes on, they are way less caring about/with equipment and give a shit about it. May be fun to look at for some time, but after a while I seriously doubt LTT for having an actual appreciation for the stuff they use. This channel is heading downhill now for a few months. Dont know why tho.

[@absurddive]

implying no one expects that Lol

[@TheSqueeker101]

FYI Helium drives are sealed so theoretically the drives should not be damaged, open connections easily could though.

[@FelipeFigueroaG]

"I should've used two-sided tape for the radiator, why did I risk drilling it in the first place?" Proceeds to drill the second radiator.

[@studioptolemyllc6476]

He had already drilled the holes and counter sunk them... might as well use them at that point.

[@lonedemon]

THANK YOU!

[@jsal92]

Then there will be no clearance under the rad for the fans to draw air from. The tape comment was in fact wrong.

[@jakebradley361]

Felipe this is linustechtips...

[@ledfed1912]

tape is a shit solution anyways.

[@themooseaider5806]

Cannot risk a leak, ill super tighten fittings, run tiny tubing runs to reduce precipitation and finish it off with this radiator i've jankily repaired using epoxy......

[@elijahbush9742]

TheMooseAider He changed the rad

[@vzgbfdnhgmjgj1100]

And drilled into that one too

[@scinorandex]

AND PLACE A 1000TB SERVER BELOW IT

[@jasonbourne2173]

TheMooseAider he used a fresh radiator in the end though

[@themooseaider5806]

i know he changed the rad, was just highlighting the thought process, or lack thereof, to even consider repairing the rad in the first place.

[@Dloweification]

Whoa, a LTT without a random advertisement at the end.

[@cartergarvoille1044]

You forgot the tunnel bear ad

[@davidmayer6960]

Dloweification blue apron is place to go for all your food needs

[@esemes16]

I see them every day on floatplane

[@hentosama]

PUT WATER TUBES ON TOP OF THE PETABYTE SERVER WHAT COULD GO WRONG??????

[@SSMateuszSS]

Everything

[@chapel4533]

I seriously don't understand why he doesn't simply put it on the bottom...

[@ricksadler4594]

The further down it is, the more dust it accumulates.

[@peterpopofff]

the hard drives are most likely will be fine because their completely sealed off so water is not gonna get inside them but the water will most likely mess up the other shit

[@juanurdaneta9844]

Couldn't he just put the petabyte project above the water cooled server?

[@ricksadler4594]

Linus: "I'll just drill into this radiator taking no precautions." *drills into radiator* "Shit. I should have just used double sided tape. Oh look, another radiator." *drills into radiator* smh

[@StrelitziaLiveries]

Richard Sadler gold just pure gold

[@jayjaygolden5123]

Richard Sadler sometimes I wonder if its all an act

[@jonathanoxlade4252]

jays 2 cents too much thermal paste I dident cringe I cringed at this oh look let's drill a radiator shit I fucked up oh there's another let's nearly destroy another rad oh the cringe in this my god

[@asimrizvi4031]

Richard Sadler 9 no 9 f dd

[@Msm1234msm]

Richard Sadler h

[@DeletedTaters001]

"No unnecessary risks" Does unprofessional water cooling over thousands of dollars worth of servers. LTT all right

[@scinorandex]

More like LMG cause the channel will still be fine, LMG on the other hand though...

[@aishasiddique2582]

@@scinorandex thats fax

[@JFarenci]

Its videos like these that make me wonder how that man still has all 10 fingers.

[@jayhollowayii2]

Linus needs workmens comp coverage -;

[@jayhollowayii2]

@Everything Else right i mean as many times linus drops things or get fried lol

[@GR33Nday2]

Get rid of 10Gb network in order to have a wanky watercooled server. Makes sense xD

[@as7river]

I was sincerely expecting to hear "There's a right way to do it, and there's our way to do it".

[@andrewq8527]

Leonel Cantú de Llano He did, he said "The wrong way"

[@Krydolph]

Yeah, thats what I was expecting too....

[@VibeSensational]

Leonel Cantú de Llano haha yea

[@twintailMedia]

.. there's the right way.. then there's the linus way.

[@benjaminwhiffen52]

Just put it on the bottom or the rack then you won't have to do another all our data is gone videos

[@benjaminwhiffen52]

ya that would be fun to watch. he probably would get alot of views

[@benjaminwhiffen52]

i remember u from the ncix tech tips windows sponsorship comment.

[@geothr33]

Some men just want to watch the world burn :P

[@highwolf_x]

the HDDs are the helium filled water-resistant ones, no?

[@hoangtran4736]

well, if there are any spillage, it will probably damage the pcbs of the other components. and since linus' servers are basically constantly 24/7, a sudden failure of the raid controllers would at best, result in the loss of the raid controllers, and at worst, the corruption beyond restore of every file on the petabyte project. but at least if worsts comes to worsts, we will at least get all our data is gone pt2.

[@Jaker788]

If you really wanted to cut leak risk down from fittings. You should have used Teflon tape on all the male threads. You never know when an o ring will go bad. If a fitting does loosen the seal stays, also it keeps fittings from wanting to unscrew.

[@joe1988]

Teflon tape is only effective on tapered pipe threads.

[@SSPear66]

*Screw It*

[@ViperGaming2303]

"We need to make sure it is never going to leak" 5mins later *drills hole straight through rad and fills it with epoxy*

[@seanc.5310]

James Craig my thoughts exactly

[@epoag1]

This is my favorite type of Linus video. I don't like the scripted ones as much

[@bttoborjas]

Just like in the wanky garage and kitchen set old days. Never forget the days of the racing dildos.

[@Tinqas]

Alberto Borjas wut

[@bttoborjas]

+Olly Fenn you must be new here :D

[@epoag1]

Alberto Borjas I still go back and watch those vids over and over

[@michaelcarey]

I just love watching Linus and his build projects. Drills, screws, cables, swarf flying everywhere, the odd swear thrown in, hindsight thoughts... entertainment galore!

[@anonymussy123]

Let me just use this square hockeypuck. Thats the most canadian thing ever.

[@connorml]

lol

[@MJ-uv4qo]

lol

[@talltiger2790]

lol

[@AG.Floats]

lol

[@muh1h1]

Tightens fittings with pliers to avoid leaks at all cost - uses a glued together radiator that is destined to leak at one point or another... #justlinusthings

[@Ruhrpottpatriot]

He switched the radiator out in the vid.

[@IPpainting]

yeah but he wouldve used it

[@Ruhrpottpatriot]

Done right, the glue would've sealed the cooler. I find it more "concerning", that he found a second cooler and decided to drill again. Even though he had the idead that he could've glued it into place.

[@nicolalombardi7352]

"We can't afford any leaks", proceeds to drill through the radiator and fix it with glue

[@choidoes6441]

why can't you just dump ice all over in the server box?

[@Strift__]

Choi Does like he said, it will melt. You could use milk for the server, it will eventually turn into a solid which will fill all the cracks and crevices to keep it cool

[@IndeterminateMetal]

The biggest problem with putting Ice is that is blocks the air flow.

[@ganaraminukshuk0]

Choi Does You Reminded me of How To Basic's cooling vid. Probably the last thing you want to do.

[@NonsensicalSpudz]

the ice would stop the fans from spinning, besides that don't see why you can't just dump frozen water on a pc

[@TheSkogemann]

Yeah, liquid nitrogen doesn't melt.

[@davidmayer6960]

"There's a right way to do it,and there's our wrong way to do it" --Linus. 100% legitimate quote

[@JHA854]

This might sound crazy guys, but what if they like, did a whole room water cooling?

[@steffeeH]

They've already done that

[@Kaljami]

Swoosh

[@Squidward1314]

steffeeH captain obvious here xD

[@Rebasepoiss]

That's the joke.

[@thoryan946]

Ba dum tssh.

[@Sketch1994]

14:29 lmao...We have another rad, next frame he's drilling through it!

[@mashalkhan8261]

ikr

[@Spaghetti775]

"This will be mounted ABOVE petabyte project" but why tho

[@apoclypse]

This.

[@Ishiku__aka_xchoibitschibihil]

apoclypse ^^^^^this

[@PongoXBongo]

Heaviest items (batteries, storage, etc.) toward the bottom, lighter things (CPUs, networking, etc.) toward the top. They can always put a plastic "diaper" on the water cooled unit to protect what's below, draining any leaks away from the rack.

[@starlarkyt]

CellDevises for weight reasons

[@cedced29]

Mechanic here. Dont know a lot about computers but love whatching this. Get to make a lit of things from scratch (work on semi fleet for a company) and i can relate to a lot of this.

[@justinproctor1834]

MOLEX to SATA lose all your data

[@Hollipolli]

Justin Proctor Well that was a good pun

[@hentosama]

Hollipolli its reality

[@Hollipolli]

Oscar Velazquez I know but it rhymes as well.

[@thinkbefore1131]

Oscar Velazquez

[@PaulyRenzeth]

Rhyme.

[@Licatese0Roussel]

Lets expose as little tubing as possible in order to avoid any problems 312 years from now. But let's drill a hole into a radiator then, fix it with epoxy. Amazing.

[@Benjamin-rq1fi]

5:25 watercooling a server mounted computer above (not quite) Petabyte Project? That sounds like an unnecessary risk to me.

[@ShannonVampire5320]

Somewhere out there, JayzTwoCents is crying

[@snazzysnazzergryphon8550]

Someone out there is watching this at 8k god some reason

[@Dgeigerd]

only 4k here

[@megamixa]

@@snazzysnazzergryphon8550 They upload in 4k, though...

[@Pdawg-wm2wl]

Lol

[@luisramirez-or5vg]

14:33 - 14:47 Close your eyes and let imagination sink in

[@Ishiku__aka_xchoibitschibihil]

Luis Ramirez this shit!!"!!

[@xhulioballiu8538]

i just love this comment

[@nathantron]

Oh great. A new WHOLE room water cooling series...

[@VibeSensational]

Nathan Trone if it kept the other room cool then why not xd

[@Dirtyboxer1]

Did anyone else cringe when Linus started drilling on the second radiator, after just saying he should have used double-sided tape? I did. I was almost certain he was going to drill right through it. Also, Linus, WTH were you thinking putting a repaired radiator you hadn't tested into a unit right above your future petabyte storage? Lol That whole video I was just yelling "STOP! For the love of God, Linus! Just stop!"

[@TheAtqthe30th]

michael gregory Like honestly if I were Linus I would place the water-cooled render machine on the lowest point of the server rack and have a container in the bottom to stop any water from pooling on the floor. So that way if it leaks it won't damage any other machines in the rack

[@Lambda_Ovine]

I just imagine a guy screaming at a computer screen "STOP! for the love of God, Linus! Just stop!" and it's a pretty funny scene.

[@nathansautodetail]

Yes...so much cringe in this video.

[@nerdyrcdriver]

I could be wrong, but he might have been tapping (cutting new threads) in the holes so the screws would thread into the radiator brackets instead of going all the way through the radiator. If he had to reverse the drill out instead of just pulling it out, then that's probably what he was doing. If he just pulled it out then he must have been making the holes bigger for some reason.

[@Maaad-maaan]

I was just about to say the same. The man never learns. I've given up on him ever actually thinking anything through

[@williamwatkins6669]

I love the classical music in the background. You should do that more often

[@CameronHarris9499]

Love the new music choice lately.

[@Fanaz10]

This.

[@maggiejordan2638]

Cameron Harris It reminds me of the music from the fallout 4 build video a few months ago

[@CameronHarris9499]

Yeah it does.

[@kennyelkhart]

"Always pull back before trying to insert" - LinusSexTips

[@RageQuitRQ]

- LinusSexTapes

[@Metroidprime2002]

Drill with protection. ( ͡° ͜ʖ ͡°)

[@emmetfcgaming6186]

I have the right fitting

[@emmetfcgaming6186]

Oh now I'm having fun

[@ToddHowar.d]

He's not wrong, you gotta make sure the fitting is ready for the pump.

[@AudioPhil96]

You should have made an "Whole server-room watercooling project" :D

[@reas0ns]

AudioPhil96 Put the whole server room into the sea.

[@AudioPhil96]

iHypez How about an acrylic pool in the center of the warehouse where the servers are submerged in mineral oil? :D

[@reas0ns]

AudioPhil96 Then thats not "water"cooling :o

[@Person-fr5md]

Then, it would have been a LTT project, this is a fucking test.

[@Jackofspades180]

Whole server-room submerged in phase-changing liquid nitrogen.

[@AlfredWheeler]

It's great that you don't hide the mistakes, problems and challenges, but instead present how you deal with it. Kudos! Thanks.

[@jc265]

"I should have just mounted the radiator with double sided tape" *proceeds to drill through another radiator*

[@aefilmsweddings]

Thought this same thing haha

[@jasrajchattha9800]

Hodor Q

[@EenGeniaalGameKanaal]

Hodor hold the radiator hold the radiator hodor

[@seanmartinson6249]

"We have another rad!" *immediately starts drilling into it* I cringed.

[@n0ldgr769]

Sean Martinson thought the same thing I saw him drilling and I was like wtf why no double sided tape

[@amshermansen]

Tape would be much worse.

[@lorenzopierotti7875]

Sean Martinson mee too

[@IPpainting]

well i mean its purpose is sitting horizontally in a rack its enough to fix it in place with a very good double sided tape onto the chassis for moving around on its right side up

[@MrValgard]

anyway why he pulled out second after he screwed everthing togeder ....

[@cj37373]

Btw you can just put this below 1pB server

[@DagamonEx]

CJ636C65 this needs to be the top comment XD

[@NoLoMo]

My guess is that it's too heavy for it to be safely mounted higher.

[@LewisGreyChemGeek]

Agreed

[@thebreatho]

Roman Larenas it doesn't matter, Servers don't rest on each other, each individual case has its own railing system supporting the full weight

[@JohnDoe-qx3zs]

+Roman Larenas 2U higher would not be a problem. Trick is to lift each 45drive cabinet 2U separately, while temporarily handing off the full load to another cluster member so drives can be spun down while moving.

[@betamax80]

I have to say, fair play LTT for publishing such an honest video for such a major channel. I've worked with 1U, 2U servers and the whole format is so problematic!

[@kstolstykh]

Am I the only one who hears a loud static noise when playing the video? Or am I tripping?

[@TheSamDickey]

Kirill Tolstykh Nah man I hear it too, you ain't crazy

[@jeremycrocker2524]

Yep. It's consistent all the way through to 7:38 and then it comes and goes constantly. At first I thought it was background noise, but it stay consistent everywhere he goes so its probably the mic.

[@drkamikaze1]

Kirill Tolstykh I was going to say it's the server then I turned up my volume

[@vidolarara]

That is the buggy Premier denoiser effect. Linus, please make them apply it on the whole audio channel that way, there shouldn't be any noise spikes.

[@huskypro1]

It's the fans I think

[@JoTheVeteran]

You know I subscribed to you about half a month ago. Before that I've seen your videos here and there but I wasn't convinced it was worth my time. I couldn't be more convinced after watching this video. The things I had to go through so that a machine eventually works, I'm glad to see others face the same issues as I and I'm grateful you show the whole progress of it, instead of "I'm using these parts, it's easy to assemble, it's done". It's never easy... Great build man, hope it serves you well.

[@tobynott7840]

Jo Veteran more like I hope it servers you well

[@JoTheVeteran]

Oh no you didn't! How can you even go on with your life now? :D

[@aspade01]

Of course you had a hockey puck around...

[@14031993]

Well he is Canadian

[@adamgtrap]

Is it racist to make those comments, or is it nationalist?

[@emu5581]

Canadians aren't a race

[@edwardwilson7459]

oh burn

[@lukasperuzovic1429]

Or a real country

[@QuiznosBear]

3d print spacers? most would just use washers...

[@PhantomWorksStudios]

Thank you!!!! I said the same exact thing >

[@MrKittke]

next video ... Petabyte project drowned OOPS

[@bionicle1611]

Thanks!

[@DevilMinion666]

verry well sweeden

[@RChero1010]

When Linus hits an automatic center punch with a hammer at 8:36 instead of just pushing down like a normal person...

[@CazRaX]

Probably why he switched right after, he broke it.

[@datalorian]

"Can't risk leaks" Fixes a radiator with expoxy, and over tightens pipe fittings. Amazing. No bulge whatsoever indeed.

[@Not_Loading]

This was the first LTT video i ever watched, this is the 10th time i watched it in half a year.

[@jackjones8988]

more like "A right way to do it, then the Linus way of doing it".

[@nemtudom5074]

Thats what i was thinking too

[@jono3952]

Why don't you have a drill press ffs? Always seeing you guys using hand drills for delicate work...

[@bmxriderforlife1234]

because you dont really need a drill press. i mean they are nice and all but its not required.

[@jono3952]

He drilled a hole in a radiator.

[@Bloodication]

but is it working? yes. Whats the issue son

[@dunxy]

Im pretty sure ive seen a press in other videos, would be the smart thing hey...

[@Anthonypython]

actually he fixed it with epoxy, and said he fixed one before like this and worked fine for many year's. couldn't use it yet since the epoxy hasn't hardened enough...

[@alistairstuart2009]

You should put it in the bottom of the rack not above the HDDs!

[@patrick_test123]

alistairstuart2009 "there is a right way and the way we are going to it" Linus Sebastian 2017.

[@jakehix8132]

heat rises. you're going to get a slight degree of efficiency increase by being in the hottest part of the rig. using distilled would make his errors at least unlikely to destroy everything.

[@UltimateBreloom]

Jake Hix That water would pick up ions like crazy. He's pumping it through metal. It's not going to stay safe for long.

[@Shmozone]

The storage servers and batteries are on the bottom because they're the heaviest. Makes the server harder to knock over and all around more stable. Nothing to do with heat, and the distilled water would as UltimateBreloom said pick up ions and become conductive quickly. Distilled water is only somewhat safe during initial testing for leaks, not long term.

[@zeusrealmr9927]

9:27 Linus, my man. You held it back and managed it, extremely well - with your demeanour. My fullest respect to you..

[@SkywereProductions]

800TB Project*

[@someonefromearth4898]

Skywere Productions 400TB?

[@SkywereProductions]

Oops, i didn't remember which one it was, it's edited now :p

[@thepodian9348]

Doesn't matter, gonna be 800ml project soon.

[@SkywereProductions]

Soon there will be ''Liquid cooling 40K in harddisks''

[@overclock1993]

I love Linus mindset. He minimizes the risk of leaking by shortness the length of tubing while punching a hole on his rad and fix it with glue. LOL, it makes the perfect sense. BS: professional solution, put 3 15,000 RPM server grade fans in it and let it run at it must.

[@airolospacca]

There is an awful lot oh "HISS" in this video. Kinda annoying. EDIT: typo.

[@McHox]

wat

[@FatalErrorX]

dont hear it, fix your shit headphones

[@kamigato]

it's there, just not all the time, get your ears checked

[@michaellorsensei7511]

airolospacca waful

[@potatoonastick2239]

Yeah there is definitely one, it was annoying me as well

[@KaizenHydraxis]

Pretty sure 'the editing team asked me to build this' is code for 'I wanted to build this'.

[@jackrepo1099]

When you think about it you are watching him make something which is used so we can watch him.

[@powderedwater67]

I cant handle that right now.

[@wowlumi]

Video-ception confirmed. What would be even better is if he confirmed this video was uploaded from the same server, which I think is a pretty safe bet

[@fortbrothers9809]

every mistake in the book. will done

[@douglasdtlltd]

along with drilling into the new Rad to make the holes bigger again.

[@user-rs3lg6un4n]

*well

[@peterhindes56]

*do

[@fortbrothers9809]

love linus he is like any one unless some time the writer do...

[@rexrexxington6932]

The irony lol

[@UberHaxorJuke]

microsoft does water cooling right put the whole damn thing in the bottom of a lake

[@DumbSloth87]

Kaby Lake, to be more precise.

[@shutereye2634]

kek

[@1babo]

PsyQo Syk beaned kekek

[@aspade01]

No it was microsoft. They submerged their entire data servers in the ocean.

[@gregoryviper]

As an IT guy, i can say this guy is a crazy genius. Who works like a real computer guy xD Messing it up and fixing your problems on the go.

[@TheKeleja]

is it just me, or does this jank server completely negate the entire h.264 workflow they spent so long researching a couple years ago? ghe one with that dual xeon machine?

[@Ishiku__aka_xchoibitschibihil]

Kevin Lee James hmmmmm

[@obvious_humor]

Kevin Lee James They didn't change the workflow, this is still the export server but they found that IPC was more important than threads, so they switched away from Xeons and Linus threw a spare 6950X into this one.

[@h7908]

why not use mineral oil for the cooling loop instead of water so you have even more safety

[@suicidalcupcake222]

because mineral oil has a lower thermal capacity and conducts heat much less effectively. It can also destroy the tubing...

[@h7908]

oh ok coz i know its not electrically conductive so for petabyte project underneath it would be a life saver if it leaked

[@bmxriderforlife1234]

because mineral oil is more viscus then water thus it would wear out the pump a lot faster as well as require a lot more effort to drain and flush the potential for mess is higher. also the results wouldnt be much different.

[@suicidalcupcake222]

bmxriderforlife1234 yes the result would be very different

[@h7908]

what if there was a pump witch could handle such viscosity as mireral oil

[@ajay01281990]

problems linus could solve easily if he had enough time to wait around for a 3D print job

[@HeresTheBrotherhood]

listen bro your the best out there period and its killing me watching you pop holes in that rad like that ! dude for a dollar you can buy a "bit stop"a simple ring wih a set screw that will slide up and down the bit for depth

[@user-rs3lg6un4n]

Linus, is there something wrong with you?

[@ErdnußRiegel6969]

Ggaming Gavin Im asking that Since 2008 to Linus

[@breathlesstuna8919]

Ggaming Gavin Of course there is. Several things, actually. That's why we love him.

[@padlockbeats151]

flaws are character ;)

[@nunayobusiness7521]

am i the only one noticing alot of white noise on this video?

[@sangeetsubedi9509]

Nope, me too

[@Ultimaniacx4]

Linus was so mad his anger coalesced into an audible hum.

[@ChaseMcloud]

Yeah Linus is pretty loud.

[@menix2384]

Huh, I think it's the loud server fans.

[@Science759]

I noticed like halfway through the video that they tried to clean it up, but the noise filter was cutting in and out, also making Linus sound like he was on a 0.1 bitrate stream. Very weird and not expected in an ltt video...

[@j.l.2620]

Auto punch: one of the greatest tools known to man, and does not require a hammer lol

[@MrMoxes]

I think I just realized, after watching the server room vlog, that this takes place in the future! the room is so much more clean than before. Ah the power of editing.

[@EternalSilence1]

Why is the server room so small? Why isnt this a decent space? Cause i think its not gonna be future proof, such a small room, for their server.

[@jjws600]

They literally used the cupboard under the stairs...

[@UKPhoto111]

Also because storage space for unused components is more important than a decent server room in LTT world. :D

[@bobbobo4748]

For what would they need more/bigger servers?

[@Excludos]

Their servers handles all the rendering (and storage) of all their videos. More power = faster rendering = can put up videos faster and more often, not to mention all the manhours wasted waiting.

[@soup5220]

+Qun heuang how large is your server room?

[@fabianl1098]

9:25 when you don't pull out fast enough 😨

[@vivekmurali7642]

Fabian L this needs to be right at the top lol

[@fabianl1098]

Ikr lol😂

[@nekoroms]

but linus doesnt need to pull out anymor ;)

[@vivekmurali7642]

***** loooool

[@vivekmurali7642]

***** either way he knows how to work the epoxy 😂

[@alextarr1423]

Watching Linus use tools is funny.

[@deamon6681]

Jear, it gives a Tim Taylor vibe.

[@williamtrevena7016]

"let me use a hammer on this automatic center punch rather than push on it as intended" -Linus

[@gullraiznadeem2548]

My favourite kind of ltt video. Just getting stuff done and solving problems on the go

[@JonTheGeek]

"I should have just used double sided tape..." Finds second rad *Drills into it*

[@hanro50]

Are you sure your editing staff ain't going to remote desktoping into it to play Crisis?

[@ivanmirinski7439]

Do you live in the Sahara desert? Because I hear slithering from this video.

[@alexanderblokzijl2454]

ikr fcking annoying

[@pepperhawkins8357]

I really appreciate this video on a different level. Only because you showed us that you are in fact human and not some kinda super wizard!

[@Ben79k]

putting that edgy server above all your other mission critical servers. classic. i smell another disaster video in a few months. lmao tragic but good content.

[@liquor8396]

Ben79k does the server listen to slipknot

[@marekchrusciel5564]

Reads title in my mind : No you did not just do that

[@awk4722]

Marek Chruściel Hey Noble

[@marekchrusciel5564]

Andrew Kingstrom shit they found out *rollin away*

[@lovelol3]

the classical music in the background makes me feel like LTT is trying to educate it's viewers on more than just computers ... how dare you sir!

[@conspire2truth]

its not it's

[@orlandogil14]

Best vídeo so far. Please make more server room stuff. NAS/Servers/PDU/KVM/UPS/Disaster Recovery/Room cooling/Server maintenance. Love your videos 👍🏼

[@Rundberget]

Keep up with the classical background music! :D

[@Tidestomper]

Do you know piece that starts at 12:00, i thought it is Mozart but I listen to his sympohnies and this is none of them.

[@aMR5AvDeG]

But is it RGB?

[@topbun8304]

every no rgb vid I will slit my wrist

[@JBthunder23]

I will laugh if this leaks over petabyte project.

[@CoolKoon]

You're not by far the only one expecting for that to happen....

[@foogabob1079]

Josh Bahr not if when

[@JustinJacobs005]

The concept of this video is right on par with your raid-0 server crash and shows you still don't understand servers. For those looking here for server guidance: Servers are meant to be reliable, long-lasting work horses, not overclocked and water cooled custom monstrosities (except for lab machines, then by all means). FYI, if you need a 2-U server with a lot of horse power, look at hyper-converged servers, I have some from hyper-grid (or nutanix, vblock, etc) that have 4 blades and 96TB of ssd storage in 2-U size.

[@LetsPlayTheMoment]

Did i miss any Server-room Update? Looks very different from Last Time i saw it...

[@ffgzed]

the server-room update video isn't out yet.... On Twitter LTT wrote: "Server room update coming along nicely. Gonna be more than one video tho.. hours of footage.."

[@brofights3138]

tooti but is it comming?

[@ffgzed]

Yes.

[@010FSL101]

Drilling a hole in a rad like that... what would you expect. Linus needs to chill with these projects lol he broke the screen in the razer project and now this.

[@ORCACommander]

All he would of needed was a drill press, not even a good one!

[@amshermansen]

Would HAVE*

[@GSP-76]

010FSL101 what I want to know is how the rad is getting or releasing air...there's literally no ventilation on either side...

[@britishcadet]

There is, only a few mm, that's what the broken acrylic pieces were for

[@electricsnut]

he breaks everything, its expected

[@voag9251]

Please do another server tour

[@Randude14]

Man I miss videos like these. Those home project kind of vids where Linus gets frustrated but we get to see an awesome ending.

[@ChadDesch]

Are you sure there's not some way you could have mangled/modified the 10Gb network card so that it fit in there? Go hard or go home, Linus.

[@andrwxu]

Chad Desch go home.

[@djordjepepic1656]

"I should have mounted the radiator with double sided tape!!" *Proceeds to drill into the new radiator* Oh, Linus xD

[@DerJoshbert]

Imagine, what kind of damage a leak in this environment would do :O

[@lancebrown7786]

Yes overclocking and watercooling guarantees the best stability and the least downtime. Great example Linus really showing us your expertise.