Waterproofing Tub Shower Walls | Easiest Method for Beginners

[@HomeRepairTutor]

We're excited to watch this video Live with you and answer any questions in the Chat!!

[@ameyers67]

Hi. Just as a clarification, WEDI and other Products like it are not waterproof on the surface. The closed cell foam structure is what gives the panel it's waterproofing. So when applying the sealant it is important to seal to the foam core and not just on the surface.

[@never2be07]

Commies Suck what do you mean seal to the foam core???

[@ameyers67]

@@never2be07 the facer is not waterproof. Only the core is waterproof.

[@ameyers67]

@@never2be07 the core is made of XPS or extruded polystyrene foam which is a closed cell foam and is waterproof. The facer is a cement based facer and is not waterproof.

[@never2be07]

Commies Suck I’m sorry, facer? Sorry I’m new at this and not quite sure what these terms mean. I guess what I meant to ask was how to seal it all the way to the core?

[@pr7562]

I've been a remodeling contractor for 40 years, and I can honestly say that this is one of the best wall prep for tiling videos that I have ever seen! Great information, well presented! I'm very impressed!

[@cuongnguyen-bo3wf]

Why you don't put building papers behind the boards to save times and your water spout is too low, at least 6 " . If this job have permit, they won't pass inspection.

[@InvestAndGrow2020]

@Biden Joe Lets Go Brandon And i agree! he’s right.

[@bflatt5417]

I was thinking the same thing I ain't been in that long but totally enjoyed this video

[@q4prez823]

You have to check your building codes for YOUR area. They ALWAYS change.

[@genecarden780]

I have been in the caulking and waterproofing trade for over 40 years and when I saw the flange stopped short of the edge of the tub I just knew you were going to make the mistake that 90% of people make and leave a huge hole at the outside edge of the the tub, because they stop the waterproofing at the edge of the tub. But you didn’t you went back and fixed it. Well done. Every “professional” tub installer needs to watch this video.( I normally get called in after the fact to try to repair the botched installation and I can’t tell you how many times I have found the tile at the narrow strip at the front of the tub without waterproofing or sometimes just drywall at that strip) I also applaud your numerous references to technical manuals. There are so many “experts” on KZbin that have never read the tech manual for the product they are using. Or they are just so ignorant that they think they know more than the manufacturer. Especially when it comes to sealants and waterproofing. The morons that advocate using soapy water or even window cleaner to tool sealants make my blood boil. Sorry for the rant. Keep educating people on the CORRECT techniques and details.👍

[@ashleywilkes7632]

So… say a person did that - stopped the wedi at the flange and tiled so there’s a gap. What would a person do there? Are they screwed?

[@genecarden780]

@@ashleywilkes7632 yes they are. Short of tearing everything out and fixing it properly, you can caulk the tile to tub properly, seal the grout and hope for the best. But I have never seen a KZbin video of caulking the perimeter of the tub that was done properly. Having said that it is possible that the water never gets beyond the finishes on the walls. The problem is you will probably never know until possibly thousands of dollars of damage has been done. It’s not one of those” it will leak” problems More of a “ it can leak”

[@ashleywilkes7632]

Hm okay. It’s at the back of the shower, so I wondered if ripping the drywall out to expose that gap would work, using wedi sealant to caulk it really well. I suppose the alternative is getting the experienced tile guy to come in and redo the shower, which is fair. At least it’s not a full bathroom remodel…yet

[@genecarden780]

@@ashleywilkes7632 if I’m understanding you correctly it sounds like that would work. That is kinda what I meant by” tearing it out” and fixing it. I meant remove the finished wall in that area. Not remove everything.Sorry my reply was poorly worded.

[@ashleywilkes7632]

Oh no, I appreciate the insight and expertise. I will grab some wedi sealant and get that tidied up. Thank you very much for your help

[@SpicyWoodsman]

What an incredible teacher. These tutorials are just ridiculously helpful.

[@HomeRepairTutor]

thank you so much, we appreciate your kindness

[@ginathomas5936]

@@HomeRepairTutor Do we need a permit to do all this remodelling? Do we need licenced contractor for this job -San Diego Residential Home.

[@euijuncha2253]

@@ginathomas5936 0

[@steveciarico9824]

I can tell you never learned through a tilers Union.

[@ShannonH.Sizemore]

Truly inciteful for..lol..to a person such as myself..who's getting ready to move to my "home place" and take up renovating it!

[@sparkscreatives]

This is so clear, concise, and you fast forward through the repetitive stuff, as close to perfect as you can get. *chefs kiss* *chest bump*

[@CHARLE.Rotten]

I am a designer of tile projects and i sell Wedi. I appreciate you doing this video. All the contractors I deal with love Wedi products. They are at a higher cost but if you use the whole system it’s guaranteed for life and it’s WAY easier to deal with.

[@BillOweninOttawa]

A materiel list would be super awesome. I can figure it out and will, but a detailed list would make a fantastic how to vid truly great.

[@terryschaefer5254]

I have been a plumber for 35 years and you hit it on the nail head by providing the key issues of water proofing and giving us he solutions. Great Job!

[@eskandosmani]

Might be the best video tutorial ever, and the fact that you showed 3 techniques thoroughly is wild. Thanks for your time 🙏

[@brendanvacon5124]

Man this video couldn't have come at a better time. Literally ripped a tub out last night and ready for the new one! *subscribe*

[@jtkilroy]

One of the best step by step how to videos I have ever see on any topic. Well done sir. Wedi should be writing you checks.

[@HomeRepairTutor]

thank you, it’s good just to know the Video was helpful - super appreciate you watching it; btw, Wedi didn’t sponsor the video or provide materials but their rep Artie did provide fantastic technical tips

[@mthuybonsai5316]

@@HomeRepairTutor , where do I find the wedi product. Thank you Sir!

[@Gordonlanguam]

Miss this guy. Does a real good job of teaching

[@zach9538]

@bathroomremodelingteacher

[@meme51ful]

Very impressed with the info that was presented logistically without boring me to pieces. Very well done!!! I am so grateful!!

[@cjgraham6444]

I’m currently renovating our bathroom and needed info regarding waterproofing around the tap/shower outlets etc. This video is so thorough/has attention to the necessary detail and is extremely helpful. Thanks:-)

[@mosconi0359]

What an incredible how-to video. Don't know how anyone could convey this any better than you did! A true artiste!

[@mikedickens2447]

As an interior finish carpenter of 40 years, I watched your installation and thought you did a very nicely fitted and waterproofed job. I will use your advice when I do mine.

[@davidclark6694]

Arguably the best bathroom remodel teacher on the web. Great work.

[@jerrygrayson8421]

Steve great video, I am WEDI certified and now will include a table saw in my truck. I had been using a circular saw and utility knife but realize your recent method is better. Each time you make a video it is better as your methods evolve. Thank you.

[@florcanela49]

Wow, I can't believe I watched the whole video. I could not take my eyes off your wonderful work.

[@romanroseborough1111]

Same.

[@mikekuczynski7677]

I have one word for this guy. OUTSTANDING!!!

[@user-yr6up6xt6x]

Find it stupid to unlike this dude because he is simply brilliant.

[@davidnflowers]

Wow. Rarely do I feel this grateful about KZbin videos

[@drbarco]

As a repair person myself, I always look around to see how others do their work and see if I can pick up a nugget from someone, and I never worked with this foam backerboard, always used backerboard with plastic for waterproofing, I like this better, and your step by step I have noticed is awesome

[@Awol-Andy]

Ahhh!! Been watching videos for weeks trying to figure out how to handle the flange on my shower pan. Wish I would have found this first!! Would have saved me so much time, money, and trips to the store. Thanks!!

[@tonycurtiss1081]

You are a Mechanic! I can tell u give it the time it deserves Which requires patients, and common sense. Remodeling is not anything like new construction. I can tell the way you use your equipment your approach is effective! Great video, well done Sir!

[@saileshp2903]

This is Great video! I'm thinking of replacing my pre-fabricated shower which is cracking on floor with titles. Thank you for sharing.

[@ryanmaier8795]

Getting ready to do my whole bathroom this week and this is the most helpful video I found so far!

[@kellnic]

How did it go?

[@ryanmaier8795]

@@kellnic it went great! I’m glad I watched hours and hours of videos like this 😅

[@kellnic]

@@ryanmaier8795 awesome! I’m just trying to get educated before I choose a contractor. I’m so tempted to do it myself after watching this very well done video (and a lot of others 😆) but I want it to actually get finished!

[@ryanmaier8795]

@@kellnic it is a lot, it took me about a week and a half and it was my only bathroom so trying to get it done quick was frustrating, but it’s definitely doable and a LOT cheaper to do it yourself. Maybe have a contractor do the things your not comfortable or things that may seem to hard to do. But I’m definitely happy with the end result!

[@burningdust]

Yeah I’d sub out the plumbing for liability reasons. A plumbing mishap can cause an amazing amount of damage.

[@jimdension8074]

I have been installing Wedi and other EPS Board products for many years - very well put together video - the tub flange area is always a challenge - excellent, well put together video

[@spielnicht00]

I've been watching a lot of videos to help me prep for remodeling my bathrooms and this video is by far the most intuitive and easy to follow. Thank you!!

[@jaredwalterwilson]

Thanks for showing the most legit ways of doing things... Too many videos out there trying to say that it's ok to cut corners.

[@robinpatterson8754]

This certainly NOT your first time doing this work. Nice Job. Very Helpful

[@teddybaker7231]

Great video, I’m a bit tired watching you work, but I’m inspired. I’m in Spain, they don’t use this method here, or the didn’t on my house, It’s the 5 blob method, 3 inch blobs, makes Reno a nightmare. Thanks so much 🙂

[@MaMa-qh4dy]

Steve, you make it LOOK soooooo easy. Thank you for sharing your great work!

[@HomeRepairTutor]

thank you so much

[@vickhenderson2332]

This is way more complicated than just slapping in a tub surround!! Good video!

[@Billy_G_Oat]

Very pleasant to watch with concise and informative information explaining the importance of every step you take. Never thought about tiling a tub/shower space, but this makes me feel confident I could do it. Thanks!

[@kurtdussander4944]

If you do I hope you don’t put the backer board down in the tub like he’s doing. 5 min in and I can’t watch anymore.

[@Virtual-Media]

Foamboard idea is simple but genius. A little embarrassed I never thought of some of these great tips. Thanks..

[@trevorpollock3024]

Someone who takes pride in their work. 👍👍👍👍👍

[@rmbrate]

This video made me confident in remodeling a tub area thank you 😮

[@sovannabrand9747]

I like the video thank you for sharing. I am working on the install the shower so what type of glue can I use to put on the drywall?

[@JamesWilliams-vz1ff]

Very informative with points that will make the job last for years.

[@vyasragoonanan2560]

Best job I’ve seen so far. I’ll definitely show this to the guy doing my bathroom.

[@oklarry6056]

Excellent Video! A sausage trick, for bulk guns. Instead of plunging your knife in the end. Just smack one end of the sausage against your knee and spin a few times while smacking it across your knee. After 4 or 5 smacks, the metal clamp ring will fly right off. It will keep your knife clean.

[@elwood212]

For my very first bathroom I used Wedi which is seriously expensive in Australia. I wish I’d seen this video before building as you have some great tips I’d learned in hindsight. Such as being seriously careful to keep every fill flat and flush for tiling. The wedi niches are too small too narrow fall inwards and are too expensive wish I’d built my own. Thank god I learned all my mistakes on hubbys bathroom before building my own.😂😂

[@Teaganderry]

I appreciate the options on how to hang the backer board over/above/on the flange.

[@susanfrombflo8368]

You are an excellent teacher. Thank you for this tutorial, and thanks for answering why I had water damage on the wall and floor near my similarly-positioned tub (20:41 helpful tip).

[@DellAnderson]

This was an excellent instructional video, complete with valuable comments. That said, I am astounded that home building design has remained in the dark ages. This is not a comment on Wedi or your technique specifically, but the whole idea of putting penetrations thru a shower wall where water inevitably goes, with the only thing preventing wood rot being a Rube Goldberg concoctions of sealant tape, caulking, and rubber grommets. Lots of caulking. Lots of sealant. Valves recessed inside the wall and nearly inaccessible from the front. Certainly there are better ways -- scandinavian type showers with fully exposed plumbing perhaps? Larger one piece water proof backing boards and some kind of corner sealing mechanism? This new shower is essentially unchanged from one in a 1955 home except it has a single mixer valve (dubious improvement) vs a two knob water control shower. Still thumbs up for the excellent quality educational video. Thank you!

[@armandomelendez3742]

Beautifully done. I will start doing it with my bathroom. I hope I can find a video on how to tile it. Thanks

[@handydoc2531]

Loved this video. Great work. Question...... my tub has studs on 24” centers. Unable to add more studs or framing. Will this work in my situation?

[@MrMissthang86]

This is one of the best tutorials I’ve seen on KZbin. Thank you so much for your effort. I am very confident that I can do this.

[@hopenewman8657]

Great video it is really helping me out with my project in my shower God bless you

[@tangamanga94]

Excellent video with enormous amount of information. Do you have a video on how to do a drain pan for shower floor? I want to expand my shower but this is the only thing holding me back.

[@jerijames2876]

wow this is in 2020, hope this guy is safe and healthy to continue his work. truly an expert.

[@-sstevens5444]

Wowwww. Wish all teaching videos were as well done. Thank you.

[@shelbyjerold9661]

So easy to understand specially waterproofing the shower. Thank you.

[@staybroncy]

Im gonna try this. Ive always red guarded my backer board. Ive seen this type of board but never tried it. Im gonna give it go.

[@chozznbell1319]

Great tutorial. I've watched many of your videos and thank you so much. Repairing a bathtub basically a 2 handle to a one handle, Used Hardy Backerboard DIY, The question is I did not remove the entire Backer Board I cut out 6 of the tiles and cut the Backerboard to the exact size I then replaced the cavity with a perfect cut Backerboard, used proper backer screws added additional 2X4 for it tom adhere to. Then i sealed it with the recommended sealant I need to water proof my valves and spot. How should I proceed?

[@JulsB63]

Thanks for this. I need to redo my moms shower and mine an this video address a lot of questions an general lack of knowledge that I gave.

[@SamanthaSweetAnne]

Who else came here and realized you already put in cement board so it's a waste of time to watch it but you still want it to watch it. I learned a new word today, sausage gun! Thanks.

[@CSVUTUS]

Lol I just have installed cement board yesterday and I kind of want to redo it after watching this video….

[@jenkinsj2010]

Guilty

[@siguiendosuenossiempre4232]

This is completely different level of work, best video on KZbin myfriend...

[@kewe6968]

Thank you. I never even thought of that. I'm putting in one piece but still going to use that board. I have allot of work to do before then but want to do it all right.

[@thriftyelf3845]

Outstanding video! FINALLY someone who demonstrated how to install the waterproof panels to the tub flange!! THANK YOU! Question: if you have used Wedi and Schluter, in you professional opinion, how do the 2 products compare?

[@albert10161]

Straight to the point . No chatter . Good job man . Thank you .

[@kevinjames0000]

seems like a promotion for " wedi " =)...great video

[@lorenzomartin1019]

I like how he uses the 3 walls to demonstrate 3 different methods of installing the wedi board against the flange.

[@kevin-fn3cs]

watch alot of video but yours is far clear and simple. alot of tips i had learnt from this video. as i needed tips to do my home bathroom. thanks for the video👍

[@misterle7026]

Great tutorial. One thing i would recommend is to insulate your bathroom walls. It's more for sound and noise rather than climate control. Family member can be inside during their personal business without people from the other rooms hearing every grunt and push.

[@UntilItIsFinished]

**HNNNGGGGHHHH** **HUUNNNNHHHHGGGGGGHHH**

[@davefoc]

Over the years I built about 15 tile showers using Hardibacker over a vapor barrier. I used a preslope under a mudded shower pan. If I built more showers I would use a system like this. It took me longer to put up the vapor barrier than it takes this guy to put up all the wall boards. A lot of that is because he is faster than I ever was, but I could see time savings in every step of the way with this system. And the end product might be better. When you build a tile surround for a bathtub the vapor barrier should drain into the tub over the flange. Except water draining down that path leads to mold at the base of the tile so you caulk and there is no place for the vapor barrier to drain? I don't like either solution. What I like is keeping that water from going through the tile board and that is what a system like this accomplishes.

[@gtbike8142]

I want to do my bathroom, I am so nervous to do it. Your video is very informative

[@ewarda100]

this is one of the best how to video that addressed all the fine details, thank you.

[@HomeRepairTutor]

Glad it was helpful!

[@abutimmy3743]

Great tutorial and how he tells you to read the manufactures book..this is a major problem with all trades.

[@rowleykats717]

I loved this video. It is so going to help me with my upcoming bath remodel. But I have a question. I had my tile guy float my other showers and of course that means a “cement” type product. How can I protect the valves from water leakage behind them? Could I use the same product around the valves, etc.? Or what do I need to do?

[@122willman]

you're a complete pro. Would be so nice to have that talent. Thanks for making this video.

[@bigmex8794]

Thank you for this video. I have bathrooms to take care of. This is a massive help

[@nickl582]

You do a phenomenal job at explaining the things you've learned, that someone doing this for the first time would never know. One of the best explanations I've seen.

[@fbarr8540]

This is perfection!! This is exactly how I’d do this job. To me overkill is a must in shower systems. Perfect video.

[@Losi5t20]

WELL DONE, I have been over with different bathrooms from Ballon wall framing customer hacks and hardi and the other. Still system seems bullet proof. I will talk will my local plumbing store and the rep from weedi, The best part even if it more cost for materials the labor is so much easier. Great work.

[@HB-yq8gy]

Nice tub waterproofing. I wonder how strong is form? It looks like it's easy to cave in the tiles if you accidentally fall against it?

[@jonwimberly]

Thank you for taking time to share your knowledge and talent. Very good video. Left no question in answered.

[@edawadezz]

first video ive seen of yours ever. man i could have used this years ago when learning my first showers. great work new subscriber here

[@HomeRepairTutor]

awesome, thank you, hopefully some of the tips help

[@mikecullen400]

Just a quick tip. I just finished installing Wedi backer board in a tub surround. Make sure to use either a chalk line as in the video or straight edge to mark your cut. I foolishly used the mesh lines thinking they were parallel to the board. They are not. The error didn't ruin anything and I was able to repair it but it pissed me off.

[@HomeRepairTutor]

Great tip, thank you for sharing 🔥🔥

[@tantricsphinx]

Thanks for this thoughtful heads up. This easily could have been a pretty straightforward but, erroneous, assumption that turned out less fortunate for many. Good stuff!

[@andykeene7672]

Thank you! I am not worried now about tackling my project now...

[@MountainAngel01]

Thank you!!! I love the way you are so knowledgeable and detailed! I have never been able to find such a great teaching video as good as yours! Thank you!😊❤

[@speedracer210]

PRO TIP: When using any type of sealant to attach panels to a flat wall use circles instead of lines and it will actually create a vacuum and hold the panel better.

[@kylebrown3734]

Thank you I will be applying flat wall panels to this backer board. Will do the sealant in circles.

[@piyushsopory5817]

One of the best shower waterproofing videos

[@JuanSanchez-pi5pj]

Thank you Sir for taking the time to do this video ,very informative, gives me confidence to redo my shower by my self...l really liked those foam covers..thank you so much..

[@adriannewright2873]

Most helpful video I've seen for this project by far! Thanks!

[@renobtankit6019]

fantastic vid, I will be using these products on my shower next month.

[@devilshaircut9]

Just got the Wedi Tub kit and the OEM site is weak on the Flexi-collar install. Thank you for making it clear and sensible, I'm ready to go

[@edwino.4773]

Awesome job! Thanks for the video! Was looking at Schluter but seems that wedi might be less time consuming

[@budnspud]

Can you add red guard on top for extra waterproofing?

[@kittysch2]

Are you scratching the tub? Is the film still on the tub? With your drill, hand tool. Good instructions for me and many

[@richardsipala346]

Weeoh, excellent tutorial. I’m in the same boat with a total bathroom renovation project. The only exception here will be full overlap all the way around tub with my Wedi board. My walls were badly out of square. So my ferrying strips have me about 1/4” out from the tub lip. It’s okay cause I’ll just make up the difference with Wedi caulk. I will also run a glue bead down each stud because that’s just me. I will use my finger to level caulk at the tub because a putty knife might actually scratch the tub…. That would be me for sure LOL. Okay, so here I go. My inner tub wall has been fitted..l. Now the glue and caulk. Wish me luck everyone. My tile guy comes in two weeks so I hope my end product will suitable for him. Later

[@Jeziorski7]

I was always taught the backboard sits on the flange and the tile then goes down to the tub. I personally think the way you did the first wall would be more water tight, however won't your drain no longer be centred?

[@shkhamd]

Also some says that method has the risk if the sealent breaks then water would get to the edge of the backbaord and damage it, which is why backboard on flange, tile down to tub was recommended, idk which is more practical.

[@romanroseborough1111]

Excellent video. Easy to follow and understand. I'm currently renovating and feel that my Bootz shower installation from Home Depot may need to be redone for a proper waterproof seal. It was the prefab 4 piece shower and tub system. Plumber only put a 40mil rubber seal around the shower system. I don't believe he waterproofed the valves or pipes for the shower head and knob. This makes me nervous watching this video. Great content nonetheless.

[@jenba36]

Very informative video, thank you for all the details! Any chance you know what model tub this is?

[@Vin3Man]

This video has given me confidence to at least attempt to remodel our 60 year mauve tiled hall bath. 2 questions, do you have a complete video series on this entire bath remodel since it looks so similar to mine and what tub make model is that you installed? My cast iron tub is narrow due to a nearby window and I need to find a similar size. Thanks!

[@martharamos8833]

Hi I just found this video and I love it thank you I am planing to tile my butroom shower my self Whit this video I learning a lot I have a question where can I purchase the water proof panels I am I Canada Quebec I depreciate your help Thank you very much and I can wait to see your next video Martha

[@mcloedmashiri9118]

What an incredible teacher ....thank you so much

[@7628739]

Great advice, been watching hing, and getting ready to do my own.. keep up the great work!

[@greenspiritarts]

Great video, thank you!!! Kudos to your camera-person too!