Wavlink AC600 Outdoor AP WN570HA1(old version) Unboxing and Setup

[@rogojangigel3294]

Hello,..I have a question, when I turn it on, the green light from "POE CONVERTER" blinks and does not work......Thank you

[@BastiDevil80]

Yes an updated firmware would be necessary to fix the annoying bugs. From time to time the AP changes its IP address and starts a DHCP server. This kills the whole local network until the device is plugged out and rebootet. Please fix this, publish an updated firmware version or support the team of OpenWRT to support this device properly

[@vantrucnguyen5050]

Hello may you use EEPROM Flash CH341 Reading Membership and Coppy Give me the ROM file of the WAVLINK AC600 is not. Wire to receive feedback

[@eaheah7997]

Will not connect to the internet. Please advise

[@evofx]

I don't see the wisp option on my firmware. Where can I get this firmware?

[@WavlinkOfficial]

Hello, we have uploaded the latest version of the firmware of WN570HA1 to the official website of Wavlink. You can download the firmware to your computer and log in to the setting interface of WN570HA1 to update locally, or directly upgrade the firmware online. The address is as follows: www.wavlink.com/en_us/firmware/details/c1668bb13b.html In addition, if the firmware of our products is upgraded, it will be uploaded to the official website. It is recommended to check on the official website of Wavlink from time to time. If you have any questions, please follow us and feel free to contact us at any time.

[@hansdegroot652]

@@WavlinkOfficial Hello. I think we need an olderfirmware? Since the new one doe snot have the WISP option anymore. And that is reason I bought it. So were can we download the old firmware?

[@WavlinkOfficial]

@@hansdegroot652 Hello, there are two versions of WN570HA1 firmware available for download on our official website, a new one and an old one, you can find them. The URL is as follows: www.wavlink.com/en_us/firmware.html?page=1 In addition, just in case, it is recommended to make a backup in the management interface before updating the firmware next time, so that the old version of the firmware can be flashed back at any time. If you have any questions or suggestion, please subscribe to us and feel free to contact us at any time.

[@bt21jimin42]

@@WavlinkOfficial halo bagaimana cara merubah ip dan tanggal pada wavlink

[@WavlinkOfficial]

@@bt21jimin42 Halo, Anda harus masuk ke antarmuka manajemen produk untuk menyiapkannya. Di antarmuka pengaturan jaringan nirkabel, pilih metode jaringan "IP statis", lalu isi IP; Selain itu, biasanya saat pertama kali Anda masuk ke antarmuka manajemen, selama Anda mengikuti panduan penginstalan di halaman web untuk menyiapkan, Anda akan dialihkan ke antarmuka pengaturan waktu. Ini tidak sulit ditemukan, Anda dapat melihat antarmuka manajemen lebih lanjut. Jika Anda memiliki pertanyaan atau saran, silakan berlangganan kami dan jangan ragu untuk menghubungi kami kapan saja.

[@VulatrainFr]

Have you a New firmware ?

[@GFRochao]

Here I can download d The last firmware?

[@davidlee8973]

Yes, please go to wavlink.com or contact me via [e-mail] and I can send you the latest firmware.

[@zafpdingbats]

kindly send the latest firmware on my e-mail : [e-mail] thanks!

[@Unocl4ss]

@@davidlee8973 Pls send me firmware to [e-mail]. Thanks,

[@scottbradford9141]

@@davidlee8973 why isnt the firmware just posted on the web site for the public to download?

[@KandilNabil]

Please have the update to send it to me I need it [e-mail]