WD-40 Chain Cleaner and Degreaser. For more information, see bassocantor.com
Пікірлер: 30
@BevMattocks2 жыл бұрын
Thank you for this video. I always find my chain falls off the chain rings when rotating the pedals using a "contraption" like the blue one you use. Not sure why this always happens?
@matrolen Жыл бұрын
Still need to lube the chain or put some grease on it. Dry wax or wet depending on your climate
@chipper4423 жыл бұрын
Should use the “contraption” while the chain is wet with the WD-40 degreaser
@cedricsalvatore68733 жыл бұрын
AFTER USING THE DEGREASER SHOULD I PUT ANOTHER BIKE OIL
@BassocantorReviews3 жыл бұрын
Yes add lubricant afterwards
@ethangesselman52643 жыл бұрын
Does the brakes still work after you put W-D 40 on them
@BassocantorReviews3 жыл бұрын
Yes but maybe not so good as before!
@ethangesselman52643 жыл бұрын
@@BassocantorReviews ok
@paulragona19413 жыл бұрын
I think you’re referring to wd-40, which is a lubricant, this wd-40 degreaser.
@ethangesselman52643 жыл бұрын
@@paulragona1941 well if you even Touch the rotors they can not work so I don’t want to use it and Destroy my brakes
@Drago09003 жыл бұрын
No. Not near as well. Avoid that at all cost.
@warpampee3 жыл бұрын
Hi. Can I use this if I want to clean my hub bearing? I will open them and clean them. Is this foam okay?
@Drago09003 жыл бұрын
Technically yes. Id suggest normal WD40 though.
@althornes88054 жыл бұрын
Smart shop vac use👍
@NEKAADMI3 жыл бұрын
Could you please define little bit more about the blue container that you using clean the chain. Which chain cleaner or degreaser should I add into that blue container? I am Benninger cyclist and looking each and each video about the maintain the bike keep clean and as well as how to change the tires or tube and many more.... Please advise.
@furyxvanity29464 жыл бұрын
That stuff better not be very strong, if its too strong it can penetrate through bearing seals and dry out the grease inside jockey wheels,pivots and potentially the hub bearings if it gets there
@lunatiy3 жыл бұрын
jockey wheels don't actually have bearings but bushings