We Bought ANOTHER Noble Engine! Part 11

[@rodrv6]

I always enjoy your videos, especially ones like this that show you doing mechanical work. I've got a fairly large collection of Hayne's manuals, left over from the days when I did a fair amount of car work as a side business/hobby. The older ones were the best, as they published newer ones, the phrase "This job is beyond the scope of a home mechanic and should be performed by a dealer" began to appear more and more. I'm a retired aircraft technician and I really appreciate the care you put into your work. I'm looking forward to the next episode!!

[@petersutherland2075]

I must have 50 or so haynes in my collection. It amazes me the History of the Haynes brothers . great content as usual.

[@andybegbie8553]

There's a Haynes museum it's quite good

[@georgieliverpol]

The good old Haynes manual saved me a fortune on my datsun 120y back in the day

[@deanbaldwin3540]

Great in-depth inside work

[@REPerformanceUK]

Glad you liked it! Thanks

[@chrisclayton2278]

Great to see the engine strip, I have to say, watching is becoming a bit problematic with that camera focus 😞

[@daverose5557]

Excellent, showing how it works

[@joeglabus7255]

Got to love a good old hynes manual saved me a fortune over the years 😂😂😂

[@steffydog]

Another great video, cheers guys.

[@REPerformanceUK]

Glad you enjoyed it. Thank you.

[@issacmuckelrath5541]

5 week off work now due to a push bike accident and I have to say you guys are getting me through it. Keep up the good work. Loving the technical aspects to the videos. The engine disassemble on the NOBALIST of NOBLES was really good. Although no one wants to see a video where someone else’s work is discredited, it’s viewing gold when you see pandoras being opened. Would love to see the other engine being opened up.

[@samrodian919]

But " Whoever built this engine did it in a sandpit" is the quote of the century as far as I am concerned! lol

[@REPerformanceUK]

Sorry to hear about your accident. Hope you heal quickly. Thanks for watching.

[@issacmuckelrath5541]

@@REPerformanceUK appreciate it 👍

[@BryanChandler-s8x]

Isn't it tempting to use a Jaguar 3.0 V6? More displacement, shimmed buckets instead of followers, variable intake timing, coil on plug, and it would mostly bolt right in. X-type has the cam driven water pump, S-type has a floating water pump that bolts over the timing cover-so it would be idea for using a remote electric water pump. Possible draw back, the intake manifolds are kind of tall.

[@lemmy9996]

The voice of experience !!(4:54) 👍

[@pinderwagen]

When I went aftermarket rods in my vw block, I needed to tickle the bottom on the bores as at 3 and 9 o'clock, the rods were just touching the block. I think that's what the impact marks you mentioned are. You will probably have a matching shiny spot on the rod. I die grinder and a couple of mm metal removal around the contact point fixed it.

[@Drones_and_more]

There used to be a Autodata book, it was fecking awesome, loves the Haynes as a spotted teen motor bike lover.

[@johnrowell942]

Fantastic to a top engine builder strip down and engine which they did not build. Find things out about it. Nice cosworth parts. Look forward to the build on this engine.

[@meirionrhys3786]

Those are a long way away from cosworth parts 😂

[@garethv1554]

If you went in most garages through the 80 & 90s there would’ve been a shelf full of Haynes manuals lol

[@garysimpson8860]

The evo’s very nice and could to see some work in the noble to as I think when I retire in 12 years time it might be finished 😂

[@REPerformanceUK]

😂😂

[@andybegbie8553]

I find these videos really interesting. I'm also a bit like yourself, I like the geeky stuff too!

[@REPerformanceUK]

Glad you like them! Thanks for watching.

[@Impulse5596]

Lee from Barrum engines is bringing his Lambo to you for a service soon, why not get him to do any necessary remedial work for you?

[@REPerformanceUK]

Machining work I was already planning to mate! 😉

[@danielmarshall4587]

OH YES...... "I read it in the Haynes manual" it was the "I saw it on KZbin" of it's day.

[@amoswillbond5917]

Really informative video, but I prefered his earlier work in "Moon".

[@andybegbie8553]

Just seen u take the sump off, are u gonna dry sump it?

[@briannareid9423]

I got a garret gen 2 GTX 35 76 with 91 rear housing for my evo x should be fun

[@meirionrhys3786]

Those rods are known for not being great out of the box for tolerances, not bad for the price if you get them direct from source though (far east...)

[@markdavis2475]

The older Haynes manuals were better. You're right that newer ones will say plug in, diagnose, and take to a dealer! Another focus whine, it seemed worse than usual... a camera issue?

[@raymondmudie8219]

I was advised when looking at an EVO X to get the GSR and spend 2500 on exhaust intake and tune and you are up to FQ360 power. The only variant that was very different was the FQ400 which had a lot of changes to turbo etc. Ended up with an FQ300. Awesome fun..

[@markcozzie]

Fought was the Evo 9, didn't know had this option on Evo X

[@raymondmudie8219]

@@markcozzie Yea UK had the 300, 330, 360 and 400… awesome cars.

[@Tracertme]

You bought another noble engine,,❤ what a noble deed you have done 🤣😂

[@REPerformanceUK]

Tell me about it 😂

[@Charles-u5s5j]

Damned, this is current? I was hoping to binge this one like a Netflix series. Now it'll be weeks (months?) before I see the final product. :(

[@bingwalker5024]

Enjoyed that , 👌

[@REPerformanceUK]

Glad you enjoyed it. Thanks for watching

[@timmymallett1]

'Reassembly is the reversal of disassembly'

[@michaellawson-l7t]

I’m need an M12 update!!! Please

[@stehodg1934]

Removing a splinter mix sugar and soap into a paste . Put paste on plaster then put plaster over the splinter remove plaster after 12 hrs . Splinter will now be on plaster 👍

[@REPerformanceUK]

Never heard of that! Great tip. Thanks.

[@jamesmatthews-pv2ft]

Thanks for mentioning haynes manual for internet genealogy looked on Amazon, 1 new one in stock for £14 and 1 used one for £4, ordered £4 one, happy days. SO thanks

[@REPerformanceUK]

You’re SO welcome! Lol. Glad it helped.

[@chrisb00k]

Do you think it was bad rod bearings or just that it was a dirty build that got grit onto the crank causing that weird catching?

[@dalamar6228]

Does the crankshaft get balanced with the flywheel and clutch attached?

[@markcozzie]

Should get balanced all together

[@raymondmudie8219]

Was that a snap on chisel being used 31min into the video?

[@Drop_bear_au]

oz (new south wales, australia) has a crap load of mondao parts and engines and wreckers

[@markcozzie]

Owen's worked on the fq400 only

[@andybegbie8553]

Can u get the pistons coated?

[@shaunpowell7513]

Find an engine thàt fits the hole they bodged around thàt one K24 with turbo would be good

[@jontyII]

If you are doing new rings why do you need to put the pistons in the same cylinder? Just curious

[@markcozzie]

Common sense to keep in same bore, wear,be rather bad practice not to,

[@k4o5sfc]

Many moons ago Ricky

[@belly450]

Mark Harrison did the FQ400s with Motec , he left Owens but he was a good builder of EVOs

[@REPerformanceUK]

Yeah I know Mark, he runs HP Factory now!

[@belly450]

@@REPerformanceUK I haven't seen him for a while , he tuned my Pulsar years ago. I am mates with his brother Pete who was a high level motocross rider

[@SCOTTDIESELCRAZY]

Put a Garrett g25-660 turbo

[@mikesonic29]

Expanding on the no Japanese cars theme… any Swedish meatballs maybe a Volvo 2.5L build yet? Are they similar to Audi inline5?

[@neilwharton720]

I hope that was a snap on tube removal tool you used to withdraw that rusty old steel tube? Chisel did the trick anyway 🙈🙉👍👍well the monkey wrench didn’t work either 😂😂😂

[@mgbond]

Engine came out of the 2.5 Noble to fit a V8 engine in. This did not get complete due to time and therefore sold and an M400 was purchased.

[@lemmy9996]

Ricky, paid by Lamborghini Pangbourne to rebuild a V10 engine, consults a Haynes manual from 1990 to rebuild a lawnmower.🤣🤣

[@JonesThePhysics]

Retting is the reversal of removal....

[@ast6537]

I don't think you can buy that coolant pipe anymore unfortunately 😕

[@alexworz4135]

Needed this 👌

[@REPerformanceUK]

Good to hear. Thanks for watching.

[@philmanton7829]

googled squirter. Wasn't what you needed 😂😂

[@MikeLloyd-z2s]

Brave! 😀

[@REPerformanceUK]

😂 risky

[@markcozzie]

Forced performace green,red then black,green good for road,black lag monster and use for drag

[@lodo75]

MHI turbo not IHI turbo on an evo

[@tunnel7]

Proper engine not of that v10 rubbish cheers lads

[@ryanp6138]

You will see Ace Ventura in our video thst was edited before I saw this one.

[@REPerformanceUK]

I love Ace Ventura too lol

[@markcozzie]

This noble engine been upgraded with forged pistons and rods,(dont think noble used forged rod's), wheeler dealers noble showed how bodged these put together terrible, should've used second gen st engine

[@ro63rto]

21:50 - Beefier rods than McLaren fitted on some of their engines .

[@meirionrhys3786]

They'll break a cap instead of bending 😄

[@jamest5149]

As others are offering help…Do you want me to come down and take your splinter out?

[@aeroflopper]

Haynes manual only good for wire diagram and torque settings, they were published for idiots my dad bought loads

[@depthofshine]

Replace with with R32 / R36 engine with Turbo conversion save weight and space.

[@Handless_handle]

That binging was not worth the editing, it just amounted to 30seconds of irritation! More bike content that’s what we need 😊

[@ktmnorfolk3215]

Boooommm

[@REPerformanceUK]

😎

[@julianpritchard2558]

Ah , good old “ Haynes book of lies “

[@Waynesbay2010]

you definitely need a better camera

[@REPerformanceUK]

👍🏼

[@paulnolan8056]

Focus is shocking today guys…

[@porkster5924]

What’s with the out of focus close ups guys 🤷🏻‍♂️ It’s bad enough I’ve eyesight like Mr Magoo 😂

[@REPerformanceUK]

Sorry! Trying to sort it.

[@RossDrewery]

Surely sack off that taxi motor and go with a eco boost or vr38, something befitting your calibre of supercar builds. That whole motor setup is depressing.

[@douglasmurdoch]

There nothing wrong with a bible always come in handy sand pit 😂😂

[@yasirkalwar4538]

Make me your helper, I won't take money from you

[@aidencoder]

Please. Take a short course on using a camera. Please. It's like it was filmed by a drunken sailor.

[@shafiqahmed7400]

you know you do have great content but the mistake you make is your videos are just too long. most youtubers dont do past 25 mins.. this is coming from a guy who has no clue on how to produce a video, just watch them.

[@belly450]

Yet the best videos are 1hr engine builds. i would watch longer videos over short ones all day long

[@ldtenenoff]

LOL news flash ricky we r all idiots lol please chek me spelingg

[@REPerformanceUK]

😅😂