Stripping Down Chris Slix' McLaren 650S Engine!
1:07:34
What's Wrong With This R8 V10 Gearbox?
1:25:46
Lamborghini Made a Big Mistake!
16:04
We Hammered a Ferrari!
23:16
2 ай бұрын
We Need A New Supercar Project!!
24:36
Пікірлер
@erickvond6825
@erickvond6825 2 сағат бұрын
Right... A mate of mine asked me to help him build a Ford Focus and I told him I couldn't be bothered. He asked me why, right... My answer was that it was a Ford. I personally have a few select cars I'll work on. If it's a Mopar, happy days. Audi, Porsche, Lamborghini, Ferrari, Mitsubishi, or Subaru I don't might lending a helping hand.
@spinnetti
@spinnetti 3 сағат бұрын
I have one just like it. I've had the coolant bottle and magrides. They put the strap on the coolant bottle, and THEN it leaked. The replacement bottle was cheap, but harder to put on than I thought - its really in a difficult place to reach despite looking easy. Didn't check the oil pipes or carbon yet but only 30k miles on it.
@surplusstock8778
@surplusstock8778 3 сағат бұрын
Could you swap an Audi v10 in a mclaren with this gearbox?
@russellbarker6634
@russellbarker6634 4 сағат бұрын
Ricky…….maaaaate……….f you’re going to do the Aussie accent right 🇦🇺 🦘…….you need the higher inflexions at the end of your sentence! 😉 Strewth!😂😂😂
@erickvond6825
@erickvond6825 4 сағат бұрын
Yeah, I reckon that's properly grotesque. I've done my fair share of wrenching and the state of that engine... Oh my days mate.
@garymarchant1926
@garymarchant1926 4 сағат бұрын
As a recent Subscriber to the channel and B8 RS4 owner, I wonder if you fixed this car? I can’t see a follow up video? Great content by the way, I’m loving binge watching the videos currently, keep up the good work!!
@markaddy53
@markaddy53 4 сағат бұрын
great job as always lad keep up the great work
@clivemacken552
@clivemacken552 6 сағат бұрын
Main thing is you walked away the car can be repaired
@danharbun483
@danharbun483 6 сағат бұрын
That's stunning but his gone to far with it,needs to be put into a museum
@danielmarshall4587
@danielmarshall4587 6 сағат бұрын
NO NO NO NO to onlyfans...... what would HR think.??
@MegaReddevil71
@MegaReddevil71 6 сағат бұрын
Tom's mom got it going on 😉
@danielmarshall4587
@danielmarshall4587 7 сағат бұрын
LOVE the "non-engine" tangents.....yes very COCK-EYED shit going on in the early to mid eighties education system. National curriculum, more like national disgrace. Great vid cheers.
@mikesonic29
@mikesonic29 11 сағат бұрын
Hi Kate!!!!!!!!!! So…….Ricky any collabs coming soon??
@MrDjiphone
@MrDjiphone 11 сағат бұрын
Raffle off the Superbad. I’d buy a ticket 😬
@barrylewis3937
@barrylewis3937 11 сағат бұрын
6th Spice girl was Old Spice wasent it? 😂
@yankidiot
@yankidiot 15 сағат бұрын
"I like lamp" Made me laugh 🤣Brick is a legend
@montage12333
@montage12333 15 сағат бұрын
Hey guys , could you not get the head aluminium welded and the seats re cut or the valve seats opened out and use bigger valves ? just seems a real shame to scrap a head that does look salvageable?
@icklepob88
@icklepob88 17 сағат бұрын
Was great to see you taking critics advice on board and using some power tools when stripping this engine, to save the customer £5 in labour on his scrap engine.
@REPerformanceUK
@REPerformanceUK 16 сағат бұрын
😂😂😂
@19Nutter87
@19Nutter87 18 сағат бұрын
Gonna ask a silly question but is the plan to use both units as the old one seems bigger and would think that’s better
@REPerformanceUK
@REPerformanceUK 15 сағат бұрын
It seems bigger because it’s empty now! Better set up over the new unit. The old unit will be used for storage and the dyno is still over there.
@andrewmallard2301
@andrewmallard2301 18 сағат бұрын
Love the workshop. Fantastic knowledge. Now to do a bit of flat track with Ryan Vickers, in Italy 😁👍
@JonBallard-x3x
@JonBallard-x3x 19 сағат бұрын
Fault finding is something I love Geeking-out too. Great Video lads.
@REPerformanceUK
@REPerformanceUK 15 сағат бұрын
Glad you enjoyed it. Thanks for watching.
@DaveNickels-yg8bv
@DaveNickels-yg8bv 19 сағат бұрын
Fab video guys 🙌 I have the 5 cylinder tsfi and it’s great to see the internals and how it should be put together
@streakyfish
@streakyfish 21 сағат бұрын
Educational Steps 😁😁
@paulthompson7280
@paulthompson7280 23 сағат бұрын
I've built a few high performance moters bikes and cars and this guy knows how to build moters Proper. For those who don't want to spend the money I wouldn't build a moter for you either ,
@ZephrSec
@ZephrSec Күн бұрын
Love the strip downs, great work and the display of knowledge is phenomenal
@REPerformanceUK
@REPerformanceUK 15 сағат бұрын
Thank you. Glad you enjoyed it. Thanks for watching.
@GTRliffe
@GTRliffe Күн бұрын
STOP BASHING THE TUNER WITHOUT PROPER INVESTIGATION!!!!! boys you can't blame the tuner without knowing the full story!!!! the tune could be perfect and the driver not-so. those drivers that don't understand every engine needs a cool down period after a hard time do damage like this-especially after a tune, for every minute of a hard time should be three minutes of cool down-that is why own tunes are so conservative blaming the tuner could have severe consequences on his or her career-his or her business, those accusations should be a last-last resort after a thorough investigation could be bad fuel, bad injector, excessive thrashing, excessive heat, no cool-down between runs, bad fuel pump..blaming someone's tune shouldn't be ever thrown out that easy online-the damage to one's reputation could very easily reach he's customers and eventually effect he's family that's relying on his or her income
@REPerformanceUK
@REPerformanceUK 16 сағат бұрын
I purposefully haven’t mentioned the tuner or the engine builder because I don’t know the facts! But certain things are obvious to see!
@robertblackshaw7913
@robertblackshaw7913 Күн бұрын
No1 ceramic may have broke when you dropped the plug socket and trapped that nut against it.. lots of fake NGK plugs about that drop internal ceramics like no2 has.
@REPerformanceUK
@REPerformanceUK 16 сағат бұрын
Yeah I did think that! I don’t think I used enough force to break the plug trying to get my socket in but doesn’t mean someone else didn’t try!!
@markbruton-young9228
@markbruton-young9228 Күн бұрын
Known in the trade as ‘totally fuckin fecked mate’
@ronald1968
@ronald1968 Күн бұрын
Good educational video as usual.... just one minor point..... did you not break plug one when the nut was stuck in the plug tube??.. not as it matters, it's scrap anyway.....
@REPerformanceUK
@REPerformanceUK 16 сағат бұрын
I did think that mate! I watched back as I didn’t think I used that much force getting the socket on but doesn’t mean someone else hasn’t tried before me!!
@fks8218
@fks8218 Күн бұрын
Bobble hat is anti-funny
@wosa9461
@wosa9461 Күн бұрын
Shame you didn’t have the injectors to look at - we have so many customers reluctant to install new injectors on a freshly built engine, it’s just unfathomably silly not to! and I do appreciate they’re expensive. Even sending them away for “testing and servicing” they’re operating at 200+ bar and the best testing machines produce around 10bar maximum. Definitely another GDI death this though! Concerning two cylinders have excessive oil however.. If you’re building a fresh engine, shooting for big power - invest in brand new injectors. Get everything on as level playing field as you can! Drop liners and stock head bolts?! In good hands now though!
@REPerformanceUK
@REPerformanceUK Күн бұрын
Completely agree mate!
@Mark-t6v
@Mark-t6v Күн бұрын
Not sure if someone already asked, but what would a repair or inspection like this cost? USD
@yorkshiresfinest6102
@yorkshiresfinest6102 Күн бұрын
Did you have something big to do with a skoda build for skoda ?
@REPerformanceUK
@REPerformanceUK Күн бұрын
Yea mate!
@iandalton3839
@iandalton3839 Күн бұрын
I'd rather watch you being real and having a good swear at things rather than watching the 'careful' ones that I know swear, but don't on here.
@bingwalker5024
@bingwalker5024 Күн бұрын
Really enjoyed that 👌
@chrismartin6427
@chrismartin6427 Күн бұрын
Ferrari Testarossa named Testarossa because it means red head after the red head on the engine
@fks8218
@fks8218 Күн бұрын
Have you ever seen a bigger bobble on a hat??
@graemeconnelly8849
@graemeconnelly8849 Күн бұрын
partv2
@desrobertson9803
@desrobertson9803 Күн бұрын
PLEASE STOP TRYING TO DO A NORTHERN ACSCENT AS REALLY ANNOYING, as for content top notch
@72neillyboy
@72neillyboy Күн бұрын
Buy shite, you buy twice 🤦🏻‍♂️
@LoganMoore-nf5nm
@LoganMoore-nf5nm Күн бұрын
Dav likes showers with men, Gay
@andrewwright2885
@andrewwright2885 Күн бұрын
Tom's mum has got it going on...
@ninjastu6231
@ninjastu6231 Күн бұрын
I haven’t got a clue and probably never will have 😂
@garysimpson8860
@garysimpson8860 Күн бұрын
So what your saying is tune an rs3 engine to the moon don’t look after it run it on shit fuel and change the oil every 15 thousand and it’ll last for years 😂 . If you can’t afford it don’t run them that’s why I’m poor and run run a standard jcw as if this thing happen to me I’d be broke and wouldn’t have a car , I’ve watched your channel since the start and this is one off the best 👍 great work
@shaunmaxwell2745
@shaunmaxwell2745 Күн бұрын
I didn’t like the look of the Mk5 r32 but one came up for 6k with 100k miles everything factory. Bought it and I have absolutely grown into them. Love the day too