We Break a Engine Block into Pieces and Made Disc Brake for Semi Truck

We Break a Engine Block into Pieces and Made Disc Brake for Semi Truck
#discbrake #machineshop #machinist #amazingtechnology #dieselcreek #pakistanitruck #manufacturing #machinerepair #cuttingedgetechnology #cuttingedgeeng

[@kindlyklaus9416]

Big respect for all the hard workers around the world, well done guys

[@glennpupino4890]

Poor guy with the sledgehammer probably has dreams about shredders at night

[@gumgumdumdum5824]

The dude with the sledgehammer probably hopes the taliban will give his family back when he is done working.

[@mustangpolygraph513]

🤡​@@gumgumdumdum5824

[@analienfromouterspace]

Gym at work.

[@codydickerson7714]

Probably has dreams of smashing his boss

[@vaderfloyd6926]

Probably wouldn’t have a job if they had such equipment

[@Greenpeace465]

man ...my back hurts just watching these guys

[@user-sev.kunduz]

😅😅👍🖐

[@peterpan408]

They can't afford tables.

[@twangyyy18888]

Disgusting people

[@Sp_kingz.__]

All while not wearing shoes

[@Imbroke1313]

My feet hurt 😂😂😂

[@markbousema7101]

I was relieved that once they started working with the molten metal they put their sandals on.

[@quietobserver4636]

Safety first!

[@williamharris5957]

😂

[@itsjustcalledcamping]

you spelt safety slippers wrong lmao

[@daijoubu4529]

Safety sandals

[@taco2k3]

Steel toed

[@tolikalonso]

Пакистан до сих пор не летает в космос только потому, что у этих ребят нет чертежа ракеты...

[@lovefordgalaxie]

Eles têm armas nucleares...

[@X_zero2123]

@@lovefordgalaxieподаренное советским союзом 😂

[@lolbots]

​@@X_zero2123nyet

[@mehmoodahmed893]

​@@X_zero2123 No country give gift to nucleur power to another

[@AliYafai-qh3ih]

وانت ايها الروسي لولا الألمان لكنت تعيش في عرا البرد في روسيا

[@brandonfernandez6952]

Damn.... I'll never complain about my job again.

[@FatalShotGG]

I guarantee you complained the next day lol-

[@VladimirPutin-p3t]

​@@FatalShotGGyeah, he complained about the know-it-all that had to put his 2 cents in where it wasn't needed.

[@ligmalonemusicboy5143]

@@VladimirPutin-p3t ur doing the same as if ur opinion mattered more😂

[@VladimirPutin-p3t]

@@ligmalonemusicboy5143 just think about what you just wrote there. Well, try anyway.

[@Lufanos]

​@@VladimirPutin-p3t Cheer up dude. It wasn't that deep. No need to get worked up over an obvious banter.

[@likebeatzztv7485]

official brembo factory 🤣

[@vojvoda9060]

😂😂😂😂😂😂😂😂

[@cyrusthegreat3081]

Hats off to all those hard working people! I will not lost 5 mins in this working condition.

[@KrustyKlown]

That $39 Ebay disk rotor you bought this Summer, came from these guys.

[@KrzysztofK1982]

The more expensive ones are made exactly the same way

[@adanedsstudio]

@@KrzysztofK1982yeah, just more automated, and even in Japan they end up doing similar disk rotor casting

[@richr161]

@@adanedsstudio The machining is fine minus the "non western" work conditions. Don't know how good their tolerances are. I'd be more concerned about QC. These are going on semi-trucks with tons of weight. The hardness and composition of the disk is going to differ literally daily.

[@arbiewolfe3027]

And I'll bet they could also make engine blocks from old brake rotors

[@mobeasley5454]

Next episode 😂

[@tayloralvidrez4342]

Fuck yeah they can. They can turn old shoes into engine blocks. Why do you think they aren't wearing any?

[@ZmagoZmago]

😂😂😂

[@yanceyboyz]

Probably do considering the failure rate of jaguar land rover engines 😂

[@user-sev.kunduz]

Картеры для кпп

[@rickn.7298]

We can all agree that these probably arent the best made rotors, but taking in consideration of the primitive work environment, tools, and methods and all with no PPE whatsoever, that's pretty damn impressive! My hats off these skilled hardworking men.

[@jimmysp4des229]

The roads and vehicles these pads will be used for are not meant for high performance, most of these vehicles will never see 40mph, these pads will work just fine in the environment theyll be used in.

[@Maximilian1990]

Working hard to make something bad isn't impressive

[@rickn.7298]

@@Maximilian1990 Perhaps you should post a video of you making rotors the right way using the same tools then

[@ilyarepin7750]

He doesn’t need to because he isn’t a third world street pooper who produces pig iron crap out of scrap metal in the street, he can just go to the store and buy it, and it’ll come from china because boomers outsourced our industries

[@presidentemaiq8652]

​@@Maximilian1990 What do you work as boy?

[@rodrigocsilva7729]

The concern with the safety of these workers, is really impressive

[@Mitzoplick]

What do you mean? They have their safety sandals on!

[@sticustom]

Imagine their lungs? What’s the average age before they die? Mid 40s?

[@captainfancypants4933]

@@sticustom how do you guys think america was built? These dudes are doing it the way that it was done back in the day when men were men. Now it's always QQing about safety and osha and blah blah blah. This world would not have been built with you at the helm

[@marty2872]

@@captainfancypants4933 just because that was then doesn't mean it needs to be now. We've learned better ways along the way- that's called progress.

[@sticustom]

@@captainfancypants4933 yes that’s the way it WAS done until they discovered the side effects of silicosis, asbestos in the lungs, chemical carcinogens, etc that shortened a persons life by decades. The average age of people was in the fourties’ back then, today it’s nearly 80. So you think in todays world people shouldn’t have protective equipment to prevent injuries that occur immediately or diseases that take decades to slowly kill you? These people have the rights to live a long life, not died prematurely just so the wallets of their employers get fat.

[@G00GLEIsTR4SH]

When your buddy says "You can get them cheaper" off eBay.... 😂🤦

[@tanveerahmedvirk3315]

😂

[@javiercaraballo3444]

😂😂😂

[@Catharticscrapper]

Cut rate quality = Cut rate results

[@DAngeloDino]

And then their answer is, “nah, a lil swing O the hammer and presto, almost there to a brake disc.”

[@benitoloco899]

Shit, if those brakes work well then why not? Recycled auto parts is an example of a sustainable industry my friend.

[@MrOGWalk]

Nice brakes. God bless the driver's.

[@VladimirPutin-p3t]

The driver's what?

[@powerbar118]

​@@VladimirPutin-p3tThe driver's life once these brakes fracture and break under heavy load lol

[@VladimirPutin-p3t]

@@powerbar118 ha ha, I guess that's what he meant

[@algoritma241]

Avrupa ve amerika menşeili araba markalarının fren disklerin de çok daha fazla çatlama oluyor.Bunlar daha güvenli görünüyor.Arabanızı dinlenme istasyonunda yıkattığınız sürece hiçbir dünya markasına bile güvenmeyin.

[@MrBertmsk]

Представляете насколько должен быть ушатан блок цилиндров, что умельцы из соседнего гаражного сервиса не взялись за его "восстановление"?

[@31РУС.Белый]

Как же тяжело они живут

[@commentator979]

Либо люто поведенные, либо огромное кол-во микротрещин когда варить уже бессмысленно

[@darthvader6108]

А тем более индусы.

[@Vanchesster]

да это все мелочи, вот бы так наш русский брат работал бы на автовазе, эт ж все ручная работа не автоматизированная, знать бы кто их поставщик, понятно что из двс траков, все бы автолюбители переехали на этого производителя!

[@Igor-us5em]

меня больше всего пугает ,что тормозные колодки делают из сплавов алюминия, блоки же алюминиевые.

[@tjabdon606]

Hard workers and one heck of an engine block .

[@troythegardener]

I worked on a project in a foundry for a few weeks in the US and the guys pouring the metal had the equivalent of space suits on the entire time and 10s of thousands of dollars of PPE. Seeing these guys do it in barefeet is insane!

[@lao5456k]

В металлургии без средств защиты работали в 15,16,17,18,19 веке

[@1marcelfilms]

guy gets hurt in US: massive lawsuit guy get hurt there: he gets fired

[@Mr-vn2gg]

Si no los mata el trabajo los mata la comida la india es una locura

[@jonnysnipes3123]

its their culture. they don’t believe in sketchers nike or addias

[@montestu5502]

I guess you don’t need the PPE!

[@димаагафонов-э1м]

Страшно что этот продукт попадает на прилавки , и продаётся как оригинальная запчасти

[@stvossen9608]

Ну то что будут продавать по цене оригинала это да, но если все допуски про проточке соблюдены, внутри детали нет полых мест, тогда запчасть неплоха.

[@ЕвлампийПантелеевич]

@@stvossen9608 Ты видел момент балансировки диска?

[@Алексей-ч1ч3з]

Тормозной диск из алюминия?

[@serjserjinio4300]

@@Алексей-ч1ч3з похоже это не алюминиевые блоки, а старые чугунные.

[@Алексей-ч1ч3з]

@@serjserjinio4300 с виду вроде алюминий.

[@richardernst8857]

The work is absolutely amazing and incredible with what they have to work with they are engineers 👍👍👍

[@obfuscated3090]

That right angle gearbox for the sand mixer made from a truck axle is slickly done. It's an old idea that works.

[@PonosCherezNos]

Когда в сервисе говорят: "Есть оригинальные диски, а есть подешевле"😂

[@Алекс-м3]

Оригинал - черные, красные подешевле 😂😂😂

[@piu3685]

You guys are amazing!

[@MyPrimeone]

I see where autozone is buying aftermarket rotors 😂😊

[@meaneymouse1371]

Bbbbbwwwwwhhhaaaa 👽👽👽

[@Nelson4207]

You think a business cares about your safety or makes a better product because they charge more, thats the hilarious part 😂🤣🤣🤣 Its not treated any different bubba, welcome to manufacturing on a small scale

[@BasicH0nda]

“Exceeds OEM Standard”

[@ИгорьКрупин-ш4т]

Можно вечно смотреть на воду, огонь и парня с кувалдой😂

[@johnwilburn]

Four things I can’t get over about this: 1) how much it reminds me of Indiana Jones and the Temple of Doom 2) that they wear sandals doing this kind of work 3) that they paint the cooing fins inside and 4). That there are engine blocks they actually scrap and don’t repair.

[@randomentity6553]

Well the engine blocks are not repaired because they're actually made of recast old brake rotors.

[@sneckotheveggieavenger9380]

A lot of first world trash is exported to third world countries for recycling

[@easyDoes1T85]

Temple of Doom😂😂😂 I needed that

[@mike4402]

Using one of the most sophisticated highly regulated pieces of steel and turning it into low quality cast iron and milling it to look like a brake disc takes some serious skill. Best part is most people don't know they're being scammed and think they're getting a real break disk when you are just getting a shiny chunk of iron.

[@clarencefoster7689]

Not much different than what we get on new stuff

[@ray24051]

Then you'll love the video of them making passenger buses just with tack welds Lol.

[@andrewb9893]

I work at a chrysler dealership and let me tell you man we recycle our scrap metal and it goes to china where they do the same thing just on a higher scale. Then people go to their dealer for peace of mind and oem quality but you’re actually getting Chineseium garbage. The whole world is like this in a nutshell. Make it as cheap as possible tell no one and charge a ridiculous amount.

[@FedkaSlovanich]

@@clarencefoster7689i still have the factory rotors on my 1995 tahoe, they only lost 2 thousands of a inch in 290k miles, forged steel rotors that my files cant even scratch

[@RobBradshawG]

"break" disk is correct 😂

[@xxlauchmelderx4746]

very satisfying work these guys are doing. Respect👍🏼

[@Greasyfingers60]

I think I counted 10 fingers and 10 toes on everyone. Great job working safely today, team!

[@shaulbenshimon6463]

These are newbies. The others went upstairs. 👼

[@xrjockey86]

But they all had at least 6 fingers and 6 toes on each hand and foot before.

[@a.alphbond9003]

The workers who lost fingers and toes were replace the day after they lost them.

[@clarencefoster7689]

sometimes safety equipment makes you careless

[@VladimirPutin-p3t]

If someone loses a finger they get fired... As their finger is handed back to them.

[@TheMrshaally]

Amazing street level skills...safety is definitely not on the agenda for these overworked and guaranteed underpaid workers.

[@shawnsatterlee6035]

It's their culture. Iam sure they laugh at u sucking down fast food sitting on ur ass doing nothing as u judge others. Least they have work ethics!

[@silvercloud671games]

Well they simply have no choice. At least they getting food on the table to their families

[@Salman_Saho]

At least they know what a woman is

[@borayurt66]

They are scammers.

[@TheMrSkyshark]

​@@borayurt66chill out they're not Indians

[@JJAH408]

Where the girls at ....?? Fair play lads , doing it the hard way , but getting it done 💪

[@borayurt66]

Great quality control there! If the final guy goes thumbs up, it has passed.

[@ruuusaki]

LOL

[@ROGER2095]

When your 18-wheel truck, carrying propane, is barreling down a long, winding, steep hill, with crumbling pavement, in the driving rain, you'll be grateful that your brakes passed their inspection!

[@off2u4ea99]

India can make advanced engine components, but not shoes?

[@sebrura]

😄

[@Munchstars27]

​@@off2u4ea99s Pakistan, ask them

[@MICHAEL-ys3pu]

The discs actually look pretty good but I would not trust them on anything more than a wheelbarrow.

[@bryanlatimer-davies1222]

And guaranteed to be almost round and sort of fit on the studs

[@guesswho6038]

@@bryanlatimer-davies1222 At least they do the braking job most of the time, soon at your local parts dealer.

[@khizarshah1009]

These workers are Pakistani and believe me there work are 💯💪 better they do alot of hard work...skilled worked is 10 time better then machine work and more expensive..still these guys are paid poorly...I'm not forcing you but ...I knw there work I'm local...no accidents have been reported..

[@MarvinHartmann452]

​@@khizarshah1009Yeah we see that paskistani street workers are the leading tech of the world...

[@pskbae]

Disc-shaped object.

[@erre_gomez]

Pensaba que soy muy trabajador hasta que vi esto…😂😂😂

[@АлександрЧуприянов-и3ы]

Бетономешалка у них вообще огонь , задний мост с редуктором 👍

[@i.d.6492]

When you don't feel like going to work, remember there are these guys doing hard work

[@mauriceboykin4422]

Look ma no toes

[@alejandro5930]

Y cuando tengas afán, recuerda los frenos de disco Made India 😂

[@Old_goldsmith]

@@alejandro5930 Its Pakistani made

[@jonathans4503]

If I don't feel like going to work, I don't care what other people are doing. I just don't go. If I put myself in everyone's shoes, I'd be too depressed. I do what's good for me.

[@aug.jam.1]

@@jonathans4503 couldn´t have said it any better! Totally agree

[@sergeygta4pony]

in theory , the engine block needs to be washed , heated , and then molded into a mold for baking blanks , for casting . and so , you will have a lot of impurities with dirt . and impurities in cast iron create voids and cavities , violating the strength of the casting .

[@JoseMartinez-ll7vo]

In theory these aren't going into space..

[@ExGemini]

I'm afraid that impurities are not of any concern where this breaks will be deployed.

[@shawnsatterlee6035]

Go go Google! In theory that is 🤣

[@shawnsatterlee6035]

One person on here can't even type proper English! But we is smarter, we knows it all 😂😂

[@12mak]

@@shawnsatterlee6035 He's not wrong though

[@themanu2k12]

I feel sorry for those people having to work without safety equipment. They look really hardworking people but inhaling those fumes, dust, etc or even touching certain materials can get you very sick in the long run.

[@novadf10]

Those people are working very hard to Winn a bread 😓respect and salute to all of you ❤

[@SevenSixTwo2012]

If they were in the USA, they could also loot a Nike or Apple store. According to Democrats, that counts as "winning bread" too. 🤔

[@julio43988]

Trabalhar numa fundição descalço sem proteção nenhuma isso é escravidão, povo sofre😢

[@thetruejay20]

It's an act for the video

[@khizarshah1009]

​​@@thetruejay20 I'm from Pak believe me it's not act our labour are very skilled and hardwork we even built our own weapons..it's better then and 💯 like original the problems are the equipments..and poorty

[@KalebWilson95]

That’s crazy I didn’t expect him to literally split the engine by hand

[@SirMo]

And not even wearing gloves or safety glasses. I mean imagine one of those block splinter and send shrapnel flying back towards him. Crazy.

[@juanreyes6955]

Yeah they’re some hardworking people for shit conditions

[@a.rajesh1884]

Very talented

[@ПростаяКухняДляВас]

5 лет назад я запасался пивом и безудержно смеялся под эти видео пакистанские, 2 года назад лишь слегка улыбался без пива, сейчас смотрю и думаю какой стартап замутить в гараже))

[@ripme21]

Открой там мини бар.

[@sardaukar6478]

Увы это наше будущее 😢

[@Алекс-м3]

Клуб гаражных алкоголиков

[@hansolops1287]

@@sardaukar6478 ваща будущее это алкоголь

[@Eniseysky]

​@@hansolops1287алкоголь? Мне два!

[@vaderfloyd6926]

This man broke an engine block to pieces with an old sledgehammer and two wedges. Brilliant 👏👏

[@NevskyKsandr]

14:54 отличные диски, ещё никто не возвращался с претензиями😅 good discs, no one has come back with complaints yet😅

[@простойсмертный_7]

👍😂😂😂👍 !

[@christiang.9485]

Ja klar, weil alle wo sich über die Bremsscheiben beschweren könnten, vermutlich vom Bestatter gesegnet und begraben wurden - auch eine Art von "Geschäft ohne Reklamationskunden"

[@windowsxpprofessional]

Because they all died

[@ИмяФамилия-ю7ч]

Это контроль качества!

[@hashisgod]

@@christiang.9485that’s the joke

[@nismo2070]

I'm in the US. The quality of aftermarket parts here has taken a nosedive the last few years. It's frustrating to get warped rotors right out of the unlabeled white boxes they all seem to come in now. It makes sense after seeing this.

[@tomstiel7576]

coming to a Auto Zone near you soon,,,,talk about third world,,,no wonder everybody trying to jump the fence to get in to the racist country of the USA,,,sarcasm intended

[@cobus8586]

I doubt they export to US

[@glock21guy]

A couple years ago, I put new drums on my '70 C-10. Still had the originals (at least in the front). I should have left them on there. Even though they weren't in great shape, they didn't pulsate like the brand new ones. The prices have gone up, the quality down.

[@tomstiel7576]

@@cobus8586 don't be so sure

[@eddjordan2399]

China is among the world's largest suppliers of car parts, exporting motor vehicle parts and accessories worth $34.8 billion in 2018 to USA.

[@chincemagnet]

These guys actually work. I’d never be able to hunch over all day like that, nobody would. Idk how they even do it

[@adnanshuja4075]

They are doing Hard work with Good Skill, I have not seen any where that they were cautious and care full about the Chemical Composition and Other Properties of Material as per Duty of the Component since the Part is highly responsible for safety and operation of an Auto Motive Vehicle such part failure can lead to Road Accident with various Lives to End. Any How the Process of Breaking an Engine Block is much technical and impressive.

[@MrMolox1984]

Надо им подсказать если насверлить перфорацию, то ценник в два раза поднимать можно + упаковку с брендом типа brembo

[@SashaRio]

Тебе такие и продают😂

[@sardaukar6478]

Технологии АвтоВАЗа судя по качеству

[@lashalasha3481]

На порядок лучше автоЗаЗа :D

[@Ciprian-Amarandei]

Even if the products made this way are of lower quality I am impressed by the entire process. I watched dozens of these types of videos from India and I'm impressed.

[@VladimirPutin-p3t]

This is how manufacturing is done where labor is cheap and capital is expensive. I have worked with Indian engineers who still think this way and shy away from automation, rather making processes unnecessarily labor intensive.

[@YJ-oy6zy]

Pakistan

[@TheGuruStud]

Not a single person of the over 1 billion total in any of these countries has heard of a work table! Amazing.

[@Mk-cd8fn]

Money is the problem and u are faster with this method

[@darrylhaynes9208]

Where do you think the metal for there furnace came from

[@TheGuruStud]

@@Mk-cd8fn having a locked up back after a couple weeks isn't going to make you faster lol

[@ronbelanger4113]

Show us all your ignorance without say it directly.

[@buckmurdock2500]

@@TheGuruStud then you will be replace by one of the other 1000 looking for a job.

[@Финифриф2018]

Теперь понятно, почему гаечный ключи made in India расходятся, когда пытаешься затянуть обычный болт на 6

[@МаксимМухин-э8у]

Это не Индия, Пакистан кажется

[@Финифриф2018]

@@МаксимМухин-э8у хрен редьки не слаще

[@zdzislawbazydlo7074]

I worked with metals back in Poland, this guy's are wise hard working people, imagine what they will do if you give them modern technology and tools ❤🇵🇱🇨🇦❤🇵🇰❤

[@Lau9hin9man]

А наши то токаря говорят что диск нужно на одной посадке протачивать 😅

[@jacksonpuckett6115]

As a diesel mechanic I can promise you these are rotors for a much smaller application such as a passenger car or similar. Brake rotors for semi trucks and class 8 vehicles are much larger, heavier, and typically BOLT on to a hub using 10-12 bolts. Not the little countersunk holes you see here which are typically annoying little phillips head screws.

[@eternalbeing3339]

No those look like half ton dodge rotors. Dana 44 axle, those are 5 lug, 3/4 and 1 ton are 8.

[@Jeremy-iv9bc]

Yeah no shit Sherlock. Was your first clue that they’re tiny?

[@jacksonpuckett6115]

@@Jeremy-iv9bc read the title.

[@Chris-hd7lr]

Legend has it, They’re still on their way to building their first car..

[@ВиталийМазан-е7р]

Хотелось бы увидеть фирму упаковки в которой они будут продаваться

[@kulibin82]

пфф. выбирайте сами: триалли, gm, СТЕНОКС, асинг, сакс, бош, крафт, сат, хола итд )))))

[@up8286]

@@kulibin82 Тойота оригинал

[@Savinskiy555]

Диски из алюминия???

[@up8286]

@@Savinskiy555 чугуний

[@mrnobody1897]

брембо же

[@ВасилийАнтонов-д2д]

Я не специалист в металлообработке, но наверное отверстия под шпильки/болты стоит позиционировать относительно центрального отверстия, а не поддерживаемого в одной точке рукой трафарета. Бедность это страшно.

[@AlexVLD88]

балансировка этого дерьма, покинула чат вместе с координатным станком

[@Eniseysky]

Нормально!!!

[@OlegBulatov]

Там у оправки есть проточка кольцевая. Она садится на внешний обод. Биение остается лишь на внутреннем отверстии - в данном видео не показана обработка ступичного отверстия. А все остальные кромки они обточили на станке. Не разделяю ужаса англоязычных комментаторов по поводу рецептуры. Мы не видели весь процесс варки, поэтому не можем судить о качестве. Думаю, рецептура соблюдена.

[@Shpricendrossel]

​@@OlegBulatovбалансировки диска мы тоже не видели и подозреваю что её просто не делают.

[@flyingrc2041]

You are an idiot, watch from 11min. The holes are drilled spot on!!

[@rkarins3825]

The non-existent level of quality assurance they put into their product and processes was impressive.

[@jimseviltwin1]

Definitely gives you some insight as to how powerful a thrown piston rod can be to break through the walls of an engine block!

[@MrActionPL1]

Not exactly, broken piston rod often hits weakest part of block

[@thatbluefa5913]

​@@MrActionPL1 He hit that spot at 0:42 lol

[@shawnsatterlee6035]

@@MrActionPL1 yeah because the rod knows exactly where that spot is huh? Sorta like on ur wife who will say differently as well 🤣

[@MrActionPL1]

@@shawnsatterlee6035 I've blown up about 14 engines building big turbo's projects and mostly rod knocks everywhere inside block, but makes a hole in weakest spot , then in most cases rod snap in half or if like my engines rods are forged, engine is seized

[@roscoedickhertz8947]

They were cast aluminum blocks that they melted down to make brake rotors... Let that sink in.

[@dropt6051]

I used to work here, don't let the video deceive you. we had great benefits, paid holidays, weekends off and even better employee discounts. the yearly bonuses were also very rewarding. we only worked 4hr shifts 4 days a week.

[@szymoniak75]

Don't forget remote work

[@brassmule]

​@@szymoniak75Lots of zoom zoom meetings for remote workers at the brake factory.

[@mikemike7096]

To everyone complaining about safety and quality control, DON'T WORRY ABOUT IT, These hard working men know what they are doing try to do the same when you are poor sanctioned and live in a country that can't afford to give you nothing, At least they did something from nothing with their bare hands.

[@deplorablelibertarian]

And who cares that the rotors they are making, won't stand up to serious braking. I don't have to be on the road with them.

[@عربييونيس]

​@@deplorablelibertarian اعتقد انها تصمد بسبب المادة الاصلية من المحرك

[@VladimirPutin-p3t]

​@@عربييونيسthe cast iron from the engine blocks is so contaminated here it's garbage metal

[@aleksandr4626]

Парни настолько верят в свои станки что могут позволить себе перевернуть диск чтобы с другой стороны проточить.

[@serjptz3650]

Парни настолько верят в свои станки что могут позволить себе класть ветошь прямо на резцедержатель)

[@helensisikoff]

И что в этом такого?

[@peaceone786]

Honestly I salute to these people for this kind of hard working 🫡 ❤

[@димаагафонов-э1м]

Те что не смогут раздолбить, заварят электродом и в машину собирать будут 🤣

[@Alexandr-ss5hy]

Точно. Это у них сортировка-что на переплав, а что на востановление блоков

[@opengnosis8555]

This is during the daytime operations. At night, this place is turning out AK's and RPG's.

[@Tirex-z8m]

Когда мне будет казаться, что я устал, работая за компом, буду включать это видео))

[@vitvit13]

@@118248 what good skill about it? its a pure garbage brake discs, there is too many impurities.

[@Metalmassacre07]

Damn, I am so happy I am able to buy quality products, like Zimmerman brake discs from Germany.

[@theroyalcrownedtiger2946]

I am glad I can get worthwhile quality brake parts, from the brands, Brembo, Ebc, Extreme Stop, Wagner, for my vehicles, from the local parts store.

[@Metalmassacre07]

@@theroyalcrownedtiger2946 Brembo is now chinese garbage

[@theroyalcrownedtiger2946]

@@Metalmassacre07 : Doh !

[@lh1678]

0:14 Guy in background turns to look a the other guy and they both are laughing on the inside cause they already bought the Disk Brakes from Amazon for $20 and this guy is getting paid 5 cents a day.

[@lh1678]

Guys also probably thinking while he is swinging that hammer "Death To America"

[@edwinbigpapiortiz8429]

The strength on these dudes is amazing.

[@Hytor001]

Это конечно ужас...... Как машина будет тормозить с такими дисками? Интересно не развалятся ли они при езде по горной местности?

[@sergey_sovetsky]

Finally we can see how ventilated rotors are made.

[@sergeygoculenko]

Тормозные диски.

[@onesikm3]

Don’t forget to mention! The speciality coating at the end 🎨😂💀

[@billbob5858]

Love watching my brothers in far-flung places create stuff with the barest of materials - sending all my respect 👍

[@dandruffo]

What has this world come to, some people have millions others have to work in conditions like these. Something has gone very wrong...

[@redsnapper2889]

Yep, the money for the device you are typing on could feed many children for months. Are you going to sell and donate?

[@notimeforspace2477]

@@redsnapper2889 if everyone sold their device and donate money then the food price would skyrocket and your phone will not be able to feed those children anymore....you missed the point from the original comment ,the whole system is wrong and designed to make money to few people and in-slave the others.

[@notimeforspace2477]

@@redsnapper2889 if everyone sold their device and donate money then the food price would skyrocket and your phone will not be able to feed those children anymore....you missed the point from the original comment ,the whole system is wrong and designed to make money to few people and in-slave the others.

[@redsnapper2889]

@@notimeforspace2477 It would still do more than a comment on KZbin. Far more.

[@helensisikoff]

They just need to work harder! And come out of their comfort zone!

[@G.Maximus_MBChB]

I really like how they all have their helmets, safety boots and goggles on. Great work☺️

[@handy240]

Typical selfish first world thinking. Helmets, boots, goggles are costs. Get a paying customer first

[@zheka_shevelev]

Их 509 миллиардов. Если что пойдет не так, другого найдут

[@oo0Spyder0oo]

Yeah yeah we read the same shit on all these vids, it’s getting old. They want or need to work the way they do shouldn’t bother you. Before you had better conditions your ancestors did it tougher too, get over yourself.

[@southpaw9041]

The people who first developed these working methods did it in tough conditions with minimal attention to safety. It's only until modern times that safety is taken with so much nuance and consideration. What these guys in the video do is impressive and their lack of safety equipment is irrelevant to that.

[@paulschneider4480]

a dystopian nightmare on multiple levels

[@donaldgreathouse6611]

Hard working men. Very good job!

[@m1geo]

Good to see he's got his safety slippers on while swinging the sledge hammer at an engine block casting. 😮

[@homeroaguilar6163]

The safety laws in the USA make brainless people

[@petercozzaglio6070]

Don’t know why your last name is Smart, because you’re not very smart. In many developing countries shoes are very expensive compared to the wage . And in countries that are very humid like the South Pacific, shoes can easily and quickly develop foot fungus.

[@TrippinBusa]

Safety squints too

[@alpinlt769]

Safety first.

[@m1geo]

@@alpinlt769 safety third*

[@Dirtbiker-guy]

Glad to see them take every practical safety measure to guarantee a long happy life.

[@TRACK_HAWK]

Очень много тяжёлого труда! Спасибо вам работяги, вкусной еды вам побольше))) и хорошей зарплаты

[@sardaukar6478]

Сомневаюсь про хорошую зарплату

[@TRACK_HAWK]

@@sardaukar6478 так вот я и пожелал хорошей😆

[@k-a-z-a-c-h-o-k]

Ты серьёзно?Или стэндапер?

[@Dmb.577]

Каменный век. Смотреть страшно

[@krokodil_kaban4ik]

Прикинь если в глаз кусок отлетит

[@masters_of_Kherson]

​@@krokodil_kaban4ik Та это мелочи! А если с ковша на ноги прольётся металл? Они редко до 40 доживают..

[@krokodil_kaban4ik]

@@masters_of_Kherson ноги просто шире ставить и ничего не прольется

[@sardaukar6478]

Последствия санкций, это наше будущее братцы

[@emojiemoji7725]

все як у тебе в рашкістані

[@b.h.6307]

For those who do not know metallurgy, it is an extraordinary video. It has a series of serious errors in the production of brake discs. The molding sands mixture is made as considered by the mixer, without moisture control, permeability, etc. They use cast iron from engine blocks, which is a superior gray cast iron, but it is melted at the cubilou, where they burn a lot of coal to maintain the lamellar graphite and prevent the formation of cementite. The result will be low-quality lamellar graphite cast iron brake discs. If you notice, it does not show whether they are checked dynamically or statically. A disc like this, under brutal braking, is likely to break and cause a serious accident.

[@MarcelHVAC]

and also the holes might not line up, imagine that is happening you when mounting.

[@captainsewerrat]

The way they break down the engine block tells me enough when it comes to their level of education.

[@QuarkTASCHENjoe]

Not only that they overload their old trucks and drive on bad roads, they also have this type of parts installed .. Now i know why they pray to allah that often in a day...

[@ИванЩербинин-ж1ю]

Кто не знал, как делается брембо))

[@raZZkataeV]

Запчасти для Экзиста и Автодока

[@ИмяФамилия-ю7ч]

Ага если выбирать при покупке не «Дилер», а самый дешман вот такое и приедет 😂

[@tonydauto8246]

You know some OSHA official somewhere is watching this just losing his mind lol

[@FrankBenlin]

Very good work. Thank you.

[@luisgordillo1695]

My deepest respect to these Men ! 😁😁

[@ssss-df5qz]

"How off centre do you want the casting?" "YES!"

[@Legendz167]

Boooo

[@Tearflavoredcereal]

I’m dying 🤣🤣🤣🤣🤣

[@the_even_toed_ungulate.]

Love all the safety equipment, especially the steel toe cap sandals.

[@rkgaustin]

This video has nearly every OSHA violation.

[@serbtesla]

I would bleed out 1st day at work.

[@shawnsatterlee6035]

@@serbtesla probably because ur distracted by bright shiny objects.

[@onepalproductions]

@@shawnsatterlee6035 lmao😅

[@swaldron5558]

Fantastic health and safety footwear!

[@AbdulhayQayumov-eh9ot]

Made in ???????

[@Huawei-p5l]

Made in Pakistan

[@pavelsemenov3199]

о, а вот и официальный поставщик сборочной линии Lada ))))

[@AlexeiMordor]

Ниппон вообщето, коробка даже запечатлена, где чел зенковкой занимается

[@pomastein]

ты чё:? это оригинал БМВ

[@VladimirPutin-p3t]

​@@AlexeiMordorprobably Nippon knock offs

[@MetrAXE]

Покрасить чтобы потом ещё раз обточить, гениально!🤣

[@ВячеславАртобалевский-д5ф]

Красится чтобы увидеть нарушение геометрии. В школу вообще ходил?

[@ДимитърИванов-я8ч]

Покрасили перед уточнение размеров. Не надо после клеить чтоб не засрать поверхность при покраски

[@простойсмертный_7]

В общем в школу ходил !

[@barabashka4837]

@@ВячеславАртобалевский-д5ф Учитывая общий пиздец происходящего,думаю как раз таки по тупости =))) О каких то там технология обработки метала,В том числе и термической,эти ребята не слыхали даже.Да что там,они в сланцах раскаленный метал в форму заготовки заливают =)

[@k-a-z-a-c-h-o-k]

Не фиг геометрию нарушать изначально.@@ВячеславАртобалевский-д5ф

[@deviouscarma]

Damn that looks really well made and finished

[@rkgaustin]

Guy operating a giant gas torch barefoot. Guys handling molten metal wearing sandals. Guy operating a lathe wearing a loose billowing long sleeve shirt. Nobody wearing any safety equipment or gloves while handling toxic liquids, breathing toxic particulate, and spray fumes. This video has it all!

[@BMW18M3]

I didn't know there were that many safety violations. You counted them all. Good job 😅

[@thechosenone8466]

There is a guy wearing one glove while drilling

[@TomuchLogic-ko8bz]

There Jerusalem joggers aren't steel toed 😅

[@SirMo]

That makeshift door they used to close that area where they were heating disk inserts was also probably made from Asbestos lol.

[@EricVandenAkker]

not that I'd ever expect to see safety glasses or steel toe boots, but that guy sledgehammering engine blocks is on borrowed time.

[@sergegostoli9524]

I assume the "black rocks" they throw in with the broken pieces of cast iron is coke (ie cooked coal really) but what are the white rocks ? some kind of flux like limestones ? Also this is the first time I've seen casting cores being cooked prior to casting in "Pakistani type videos", is the binder still molasses for that ? For once it's a rather decent product and a fairly well tooled casting shop albeit still using the (lack of) expected safety precautions but at least there didn't seem to be any child labor in this one

[@gundarvarr1024]

limestone

[@Spiritualwarfare587]

Is carbon for making steel harder. When u buy disk rotors some more expensive brands write high carbon

[@GNXClone]

It nice to see proper use of the words “break” and “brake”. That doesn’t happen much nowadays.

[@aftabbabar6623]

The end product had ventilation holes in the disc plates. I never saw that part where the ventilation holes were made. The mold couldn't make these holes and i saw the crude plate without ventilation holes and then all of the sudden, they were there.

[@jeffshaper9466]

The guy used a drill really fast. 😂

[@jeffshaper9466]

5:08 he just pokes some random holes.

[@paulkurilecz4209]

I like the incoming quality control on the raw materials. Which alloy do you use? Engine block. 🙂

[@dave161141]

"diesel alloy" probably 😏

[@paulkurilecz4209]

@@dave161141 😀

[@mehdihani2932]

4140

[@paulkurilecz4209]

@@mehdihani2932 I don't think so.

[@shanehinds2555]

aged engine block is the best stuff,, you know race engine builders used to throw engine blocks out in the back of the shop and let them season for at least 5 years, the longer the block sat outside the stronger it was when you built it for the racecar..

[@palscanley]

Truly amazing people naking this stuff out of old enginge blocks 👌👍

[@perropulgoso3351]

Glad to see them taking all the necessary safety precautions 😢

[@Hotrodford]

OSHA would love them

[@Hotrodford]

This is how America will be in about twenty years

[@finding_beauty_for_you]

Mad respect for the work they are doing!

[@jeffrey3837]

God 11:05 is absolutely disgusting to see. You can just see the wobble in the parts. They are nowhere close to round and symmetrical. I could just imagine how bad these things would cause your vehicle to wobble going down the road.