We built a RZR and X3 wheelie ramp... it went poorly

This was BAD
FRESH MERCH: www.sxsblogpar...
PARTS STORE LINK: www.sxsblogpar...
ROCKY MOUNTAIN AFFILIATE LINK:
www.rockymount...
Patreon:
/ sxsblog
Garage channel: / @110garage
3DOT channel:
/ @3dot374

[@iacono1987]

The wheelie ramp needs to return!! But first, maybe some wheelie bars to minimize damage.

[@ShowboatHK]

Yes this!!!

[@jaydanmoore8459]

Definitely

[@firekeeper8872]

100%

[@m42walker09]

plus 1 for this

[@markbrethauer3042]

The problem is the wheelie bar will drag the ramp

[@JHDieseland4X4]

Frankie unit can rep the JH hype shirt anytime!! 🤘🤘🤘

[@joshhopper6109]

Would be interesting to see this contraption again with wheelie bars on the machine

[@jakesmall3454]

When it ripped the back off and slowly tipped over. I laughed so god damn hard my wife was looking over at me like I was crazy. Frickin hilarious

[@noahray341]

please do this again with the 2 stroke X3 so everything does not explode after it flips

[@coryneal3161]

I was thinking the same thing

[@jpmesser4300]

It doesn’t have the low end power band to keep it up

[@fastballfilms4214]

@@jpmesser4300 doesnt need it lmao 2 stroke dirtbike wheelie no problem, they need a hand brake so they can modulate that with the throttle like youre supposed to do to keep a motorcycle wheelie at balance point.....sxs wheelies are like big squads

[@calholli]

Don't you be breaking my 2 stroke.. It's my favorite sXs

[@trashyduck]

2stroke and the rs1 were born for this contraption

[@renoallstate4573]

When I was a bit younger and had bigger balls I found the speed/ wind resistance actually helped me wheelie, 40 50 ish on a quad worked well but on a skinny motorcycle 90 was needed for any wind resistance but slow wheelies were also done and probably a bit safer

[@davemiller4016]

This was one of the best videos in a while!!! Not because of the damage to the machines but because of the building of something awesome. (a wheelie ramp) great idea!!! Absolutely a GREAT idea guys. can't wait for others to try. Good luck guys!!☝😂🖒

[@jodicouch9049]

Absolutely the ramp needs to come back. Also, Doug's machine is now half way to rock bouncer status. Time to tube chassis, put it on 35s and go back to Windrock. Then he can get a Pro R for his dune rig.

[@jimtamski5038]

looks like tons of fun. glad to see you guys enjoying the new compound. well deserved.

[@williamgonzales3902]

Would love to see the Willy ramp come back. It was extremely successful. Just next time remove every single plastic and maybe even exhaust from the back of your vehicles before you start going ham love you guys see you on the next one

[@justdunson]

Did not disappoint love the bed deletes never seen 2 done so fast

[@c4or2ey02]

He is going to be out there everyday now. Doogalfield is going to be the first to be riding wheelies like stunt riders on sportbikes.

[@devinberry8742]

Hell yes return of the wheelie ramp! Great job men!

[@brokesxs2547]

Well that went wrong very quickly 😂. The black cloud lol

[@chuckfowler8875]

Dougal is the man that wheelie looked like a Monster Jam wheelie that sucked he didn't know where he was at he could have rode it for awhile.

[@FusionOffroad]

I am thinking you should get the full role cage for your wheelie ramp! to keep the back end on.

[@DetroitLove1977]

Franks exhaust blowout reminded me of a beer and taco bell commode visit!

[@robertmerinsky3358]

Absolutely 💯 love it! You guys rock!

[@ninerout399]

Y’all need a fab up custom rear bumpers that tie into the roll bar so you don’t tear up the rear end doing these wheelies.

[@t.e.m.pmotorsports5392]

The comparison between the ramp and mikes hammer was great, bout died 😂 you guys rock 🤘

[@Brandon-wg5xu]

Maybe adding a metal plate on the back so it won’t drag anything. Like a skid plate type. Because this was honestly cool I would see that again

[@matthewmilam286]

I’m blind in one eye I would probably miss the ramp totally and just Shish kebab my machine straight through the radiator 😂

[@natedog51]

"I got a little too excited" That's what he said 😂🤣😂

[@RCLandslide]

Bro the exhaust shooting that clump of dirt made me laugh so hard! 🤣 but the wheelie ramp is freaking awesome dude, genuinely great content. 👍

[@AntiPattern328]

I think the whole 'Mad Max' vibe looks great!!

[@erikcolon413]

Just build a steel plate or "sled" that will hit the ground instead of the plastics. When I had my machines growing up they always had a grab bar or a rack that would hit the ground before anything else would.

[@chevyriding4646]

Dope ass wheelie ramp Mike your an original gangsta lol an man that x3 was pissed so dam hot she squeaked then QUEEEEFFED an shit dust hahaha awesome video was fun to watch

[@chadbanks7611]

I see a Leroy side-by-side in the near future for the wheely machine Lol would be awesome

[@kinkyretro2260]

25:20 "its like we just witnessed this 5 min ago" 😭🤣 You'd think we'd learned by the first wreck 😭

[@Brandon_Maxey]

Here I was thinking that was a heat sheild on the muffler, I didn't realize it was actually a skid plate.😂

[@austinanddilloncarlson8048]

2 battle 2 field looks like a desert racing sxs from the back and I kinda like it

[@brianboccia32]

This was a awesome video, I really enjoyed how the wheelies were going good until it wasn't 🤣

[@brian2ize]

Need to build rear bumpers that are apart of the cage but can be removed as bumper only lol what I’ve done to all mine

[@johnsnyder1046]

Glad he gave it the ole Frank n' beans, sry to see all the carnage 👍😅

[@denver8868]

Yall should build wheelie bars that slide in to that rear sub frame under the bed in putt small dolly wheels on them so yall can ride wheelies miles in miles it would be fun

[@SXSBlog]

Those aluminum bed supports folded like wet noodles in this hit lol

[@justinkammerer782]

Hardest I’ve ever laughed watching any of your videos 🤣🤣

[@KriegerKrieg]

lol the pain in Matt's eyes every wreck knowing he'll be the one to fix it.

[@adamsfamilynfun1409]

You guys need to legit post markers for longest attempt for the people who want to try when you guys put on events there. Nice work boys!

[@anthonyestevez118]

Better bring that ramp to Racetober!

[@ralphcaudill9906]

You should make the back on the Battlefield a tubed piping on the back

[@jacobdiesel8176]

Leo always laughs when everyone else recks but when he does no one laughs at him 😭

[@warviking7647]

2JP on the wheelie bar sound funn, will just do backflipps 🤣

[@Redneck_Rundown]

Gotta build a wheelie bar for one of the machines

[@joshuabutler2248]

Definitely needs to return but with a modified rig I’m thinking wheelie skids wheelie skids wheelie skids wheelie wheelie skids wheelie skids wheelie skids

[@506powersports]

Every time I watch this video I almost cry seeing those SxS getting destroyed

[@stephenscott9837]

Yikes chills every time I hear that crunching great video though 😂

[@ericraymond1274]

This would be sick with the talon or yxz so you can get the instant throttle response to keep it up! Great video!

[@robertmerinsky3358]

Roflmfao! Doug and Frank the Basherfield Brothers 😆 🤣

[@jeffd9021]

Wheelie everything, even MC MEGA!

[@trentclinkscales7536]

I think you need to build one or two wheelie machines. Everyone gets a chance to wheelie and not destroy their main car.

[@scottcummings8074]

I don't know if you are but ride the rear brake with the other foot on that balance point. I'm writing this early in.

[@socalfun64]

We need a wheelie competition!

[@mikechick1107]

Yooo Steve has lost some weight good for you man looking good

[@dr.weirdbeard2840]

This is a great hammer

[@nottoday7495]

Modify the rear ends with some tubular frame and send it

[@atctraveler6218]

Ok so now I need a wheelie machine with a wheelie cage

[@all4tow]

Dang that’s crazy

[@ShowboatHK]

This was great to watch!

[@j.taylor5791]

You guys should mod a machine for this like the cf

[@medicbaldwin]

UTV FMX. LET'S GOOOOOO!!!!!!!!!

[@shawnshaffer4230]

rear bumper tie in with cage I'm probably not the first one to say that lol

[@wrenchinator6667]

I see brake bias adjusters in you future.

[@epjetta]

Looks like a wheelie skid plate is needed

[@johnmollenkofsr7379]

That was sick doug

[@larryfoulk4466]

Maybe build wheelie bars.

[@patfilipczak6888]

Set it up on the road

[@chadyarbrough3554]

Cf1 on the ramp please

[@LmmDmax66]

Make one for mc-mega duddddeeee!!

[@LmmDmax66]

Please Doogle, please

[@lucasstacy6555]

….. Worth it!

[@kobyjordan9253]

Leave the back off cage the rear end

[@terrymatthews6530]

do it again with wheelie bars lol

[@MrCarpediempilot]

Ramp was cool. Hate to see you wreck the machine though.

[@Jnichols77]

“‘send it” Frankie

[@Mountainpageproductions]

Please more

[@geraldwcrowe]

Wheely bars

[@jaimestone8516]

It's at this moment he knew he fucked up with the wheel lee

[@jonathanchilders4570]

At this point I would just say pull the plastics off and go full tubular body.

[@tianjohan4633]

Ok, 2 upside down. Do a weld job, so rear is like a sand car. Keep wheeli'ing. Keep keep keep.

[@mitchadey]

Build a bigger one for McMega

[@MrToppox]

😈😈😈😈 that is an absolutely awesome invention 😈😈😈😈

[@theglitch99]

Bed delete hack!!

[@Walstyguy1]

🤣🤣🤣🤣 that was the funniest thing ever

[@chadhall5921]

That’s what I call a bed delete

[@mikesalois3028]

Wheelie ramp/bed delete kit

[@asylumental]

I laughed so hard when Doug flipped battlefield, I feel bad for him but that was hilarious, the entire back end got obliterated haha, it all happened in a couple seconds but it seemed like slow motion to watch it 🤣 * then frank too! 🤣 AND the exhaust explosion?! 🤣👏

[@wildstar365]

Funniest thing I've seen in long time!!! Between Dougs bed delete and Frankies dirt canon exhaust I was in tears laughing! Thank you for another great video !!!

[@jeffmoleskivintageiceracin5935]

It’s so hard to not just laugh..especially when Leo just laughs at everyone because he not tearing his stuff up

[@365AdventureCo.]

The noise Leo made after Doug said “it’s not as bad as mine I don’t think “ 😂😂😂

[@Cgny]

This was very entertaining. Who doesn’t love a good wheelie!

[@hankhank3129]

For the money "I" didn't have to spend, that was great fun to see! Thank you guys! Bring it back for more!

[@T12200]

I feel like you all just created a new competition segment for all side by side events. That’s awesome and innovative. I would seriously grab a patent and sell those direct to consumer asap. I’d buy one

[@spcneary]

Definitely a lawsuit, but I would also buy one for a reasonable price if i had a SxS.

[@fj400007]

@@spcneary something we know, nothings priced reasonably in this sport. I just realized that replacing the tires before winter will cost more than the new 34'' on my truck. I still need a few more accessories before I can afford the wheelie contraption but nevertheless, gotta admit it's freaking awesome 👌 👏

[@bubbajfpv8856]

@@spcneary why is that definitely a lawsuit? Just curious.

[@T12200]

@@bubbajfpv8856 I don’t think it is. I would encourage people building their own wheelie bars or cage extensions to protect the back end.

[@marcmo7138]

Frankies pipe clearing has me in stitches.

[@RAMOakleyRN]

Great editing to let us see it happen more than once!

[@jordancarver3357]

The sound tho! 🤣🤣🤣

[@kenleppek]

Not gonna lie I rewound that a couple times.

[@asylumental]

Honestly this video was hilarious, all the things that happened, this deserves 1m+ views

[@TylerTheBassCreator]

I was crying laughing when that mud torpedo shot out🤣 literally got funnier and funnier every replay 🤣 my chest hurts 😂

[@jbj198840]

Funniest one I’ve seen in a long time 😂 sorry about you guys rides getting torn up hopefully everyone will click that like button to help fix em back

[@2002M3Power]

Funniest vid in awhile....actually laughed out loud. The exhaust dirt blow out was an instant classic moment. Lovin the hammer ramp

[@radiocontrolledevents]

This was wicked! And one of the funniest I’ve seen. Make a specific SXS to do the job. This project has legs. Keep up the great work.

[@bobgilson301]

I wanna see the wheelie ramp return. Plus two of the quickest bed deletes I have ever seen. THAT WAS AWESOME!!! Mike did a great job on the ramp!!!

[@joshua_J]

I loved the wheelie ramp now you need to build removable wheelie bars that fit into the trailer hitch!! That way it protects the muffler and does not let you go to far back.

[@brettparson1]

Now that you have a kicker, a backflip seems like the logical next step to me! When i first saw it I knew you were breaking shit. I just didn't think the carnage would be as bad. Love it!