We did it AGAIN! Another 10.3X pass!

[@alexgrindnshine2522]

Love you content! I have been mopar fan for long time. And have some projects in the works and your content is super helpful and inspiring.

[@sub-com6488]

Great job! I got a best of a 6.90/108 in the 1/8 with a nearly identical build. SBE 5.9 with the EQ heads in a 3000lb car on about 12psi. I eventually lifted a ring when accidentally over advancing the timing.

[@ThatTurboDakota]

That’s good mph! Best 1/8 is 6.60 at 105. I wish the Dakota was lighter.

[@MostlyOldPartsAndRust]

I think you're doing the right change. My Duster seemed to be faster with the 3.23's than it does with the 3.73's. I may build another center with 3.55's. My 3.23's had by far the best 60ft.

[@ThatTurboDakota]

It seems to be working out good. No more limiter at the end of the track. It just will take a little more rpm and boost to get it going.

[@ChiefRickyRC]

Just dusted another Tacoma in the 05 4.7ho AWD. Fast asf boyyyy lol

[@dtruth5769]

Good stuff! Can we get some steering wheel info?

[@ThatTurboDakota]

Check my steering video 😀

[@ChiefRickyRC]

After pulling a 30' motorhome 4 times i believe a 4.7ho with a turbo and injectors would be close

[@dmdhl7]

What are your cam specs? If you don't mind sharing

[@ThatTurboDakota]

its 230/230 .565 lift on a 114

[@dmdhl7]

@@ThatTurboDakota Sweet thanks!

[@alexgrindnshine2522]

I know you are using the EQ cast iron heads 2.02 intake Would you say they are benefit for durability vs say using the new trick flow aluminum heads. I:E Better head sealing against the block and less prone to blowing head gaskets when using a cast iron head?

[@ThatTurboDakota]

It really doesn’t matter as far as sealing goes. If it’s in your budget to get the TF heads do it! They flow really well. Way better than my EQ’s

[@joehlavaty3580]

Impressive bud That sbe magnum hanging in there !!!

[@alexgrindnshine2522]

@@ThatTurboDakota thank you for the reply.