We Didn't Expect This Cam To Sound So Good!

WANT BREW2L DECALS? www.shopbrew2l.com/
LINK TO SHIRTS: / @brew2lfoxbody
#ANDERSONCAM #B21 #CHOPCHOP
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

[@travisevans7502]

did you measure for pushrod length or did Anderson tell you what use? Also I'm assuming you know there's more to installing rockers than just tighten them down I've done it buy just torquing them down and it always has worked but if changing heads cam and rockers which I know you didn't change heads I would measure for pushrod length and follow the full procedure to get correct rocker arm geometry this is just to help others reading the comments I'm not trying to tell you or anyone for that matter how to do things that know what's going on just thought it might help someone who doesn't know trying to learn car sounds great.

[@BREW2LFOXBODY]

That part was one of the things missing in the video. Anderson does recommend.050 longer pushrod for this cam. We forgot to order them so we decided to use the stock length which worked well. With that being said he is ordering the correct length for the car. Also I dropped the ball on mentioning the fact that I was ONLY referring to stock heads with pedestal mounts. Not studded poly lock rockers. I do apologize for not being as thorough as I should. This video was a wreck to edit.

[@hotrodray6802]

1) Exactly what I started to ask. 2) Question is.... Measuring is the only accirate way to know the correct rocker geometry. Is CLOSE enough, good enough ?? Small time investment required.

[@travisevans7502]

@@BREW2LFOXBODY You do plenty to help people out I don't mind mentioning a few things that maybe will help out also nothing wrong with the video was fine people could always ask questions if they're not sure.

[@kevin_nagle]

@@hotrodray6802 With a pedestal mount rocker you want 1/4 to 1/2 turn to the torque spec once zero lash is reached, if more or less then you would add or subtract shims.. that is on the base of the lobe. I'm not sure why they didn't bother checking that?? You'll know if it's incorrect because you will have valvetrain noise like you hear in this video. Also, you want to add some assembly lube, or at least engine oil to the tip of the pushrod, the cup on the rocker & on the roller tip.

[@stephenroberts7816]

Awesome job Andrew! Sounds great! I ja e always been interested in this cam. I can't wait to hear more and see how it performs

[@jimmyjamesgarage3290]

Hell yeah. Good job Andrew, Sounds good!

[@joshuacastleberry1431]

Going back and watching your earlier videos man. Such great content I can’t get enough. I’m in the process of building the engine for an 89 lx hatchback I bought a couple weeks ago. Things are going slow but I keep watching your videos and getting inspiration. I appreciate everything you do. Much love from KY.

[@dm7097]

I loved your reassuring tone with him. It’s nice to have someone that’s gone through things before.

[@MustangGuy6501]

Sounds good, great job Andrew

[@whitefoxpaul199]

Good job Andrew sounds good

[@podnabuilds]

Great job fellas

[@mattk7827]

Sounds good. Nice work!

[@frankenstanggarage7911]

Hey man, appreciate the shoutout! I’m just glad y’all were able to get ole Andrews car up and thumpin. Love the Merch by the way!

[@83mopar318]

Sounds very good. Well done

[@EKAutoTech]

Great job on this 👏

[@anthonycapitini8824]

Nice job , 👏 Sounds Great

[@ZXDF51]

Another awesome video!👍

[@willbianco8931]

Man that sounds beautiful

[@unclemonster48]

Nice I ran that cam with heads and a gt40 intake and an old s-trim 10lbs of boost. It was so much fun. Once you guys get the exhaust opened up and mess with the timing she’s gonna sing some sweet notes for sure. Thanks for sharing

[@GearHead704]

Love it Mr. BREW2L!

[@brandonwhite6501]

Awesome job bro!!! Keep it up and sounds bad ass!!!

[@chickenwitha50]

😂😂😂 I feel you Andrew I was nervous when I first put mine in man. Good job man ! These damn parts take time !

[@HoserHotrods]

The N41 has always been one of my favorite sounding cams and it also makes a boat load of power. Thanks for the vid! I have a stock 95 GT that I will be looking to huck a cam in for some more mean haha.

[@STXDrIvEr98544]

Love it! Awesome video man that cam sounds mean!

[@TJWelsh]

I have a 5.0/AOD in a '69 F-100. This is a great channel for some great SBF tech! Thanks from Southern Colorado.

[@Driver_Joe]

Sounds great after modification. Good job Andrew

[@danawoodall8106]

Good one guys

[@jamescleveland6775]

Yea baby😎!

[@johndoe-zb8bm]

Sounds good for being completely closed up with old stock exhaust! She is definitely going to bump with some free flowing exhaust system.

[@lamarrichardson1782]

Hell Yeah!!!

[@djdev3077]

That thing sounds nice!!!!!!!

[@dinosaurcomplaints2359]

Gnarly, dude!

[@londawg3844]

Couldn't help but notice the Hanlon motorsports flag in the background. I had them fully rebuild the T-5 out of my 86 GT way back in 1994. They did an excellent job and turn around time for me living in Illinois at the time was fast! Great to see they are still hard at it!!! Oh and I used Anderson motorsport for my mass air conversion on the same car!

[@chantalbanon9518]

Sounds pretty good 👍

[@bama_5.051]

Nice upgrade Andrew I'm sure it's going to sound great after new exhaust is put on

[@RobsGarage]

Ohhh boy she sounds awesome now

[@edsompayrac1717]

Sorry for this crazy late comment, but I just had to go with .7 when I did it. Man it would be awesome to have an interested/dad,/ friend to work with in their garage. PROPS TO YOU MY FRIEND!!!

[@BIGDMEDIA]

Good Video!! The car sounds great!!

[@dwightkeen5160]

You have to love those Anderson cams! I put an N-41 cam in my fox and it was NASTY!!!! I loved driving that car and it always got attention from people at stop lights and gas stations!

[@NickW90]

You’ve got an awesome channel. I need to start at the beginning one day to watch all you vids

[@jrusted5.031]

Chopping pretty awesome!

[@brianf7405]

Ughh those 93 Cobra R rims up on the shelf 😍😍😍…possibly my favorite mustang wheel

[@StLMikie]

Good job young buck!

[@foxperformance4536]

Loved the thumbnail for this video! Your thumbnails are so creative

[@BREW2LFOXBODY]

Thanks 🙏

[@Freakingstang]

I made an Anderson cam spec post on the corral about two decades ago with the same user name. I made 296/339 with this cam, my own ported explorer intake and my own ported gt40 heads. Car went 11.86@117/118 in 1999-2000ish. I too ran them with 1.72 rockers. The b21 and b31 were identical specs except the b31 was meant for 1.6 rockers. This is actually a blower cam, but runs excellent with a high compression NA setup or with nitrous. Speaking of nitrous, this cam is almost identical to the n21 cam abet a slight difference in centerline

[@rgsteele83]

You can always get the shims for adjusting preload if they were needed. If you get work done on the heads you may need them. You should port those heads and intake yourself or a professional, and see what you can do with the actual stock ho stuff!

[@ejsvt2956]

Been running those same rockers on my 306 E cam car and they are noisey. Sounds awesome Andrew! I'm buying bar stools!

[@philmoore2115]

After modifications sounds like a beast!

[@Spad68]

Wow . Those headlights need some love . Lot's of love.

[@BREW2LFOXBODY]

😂👌

[@brokentoolgarage8609]

Oh yeah, the new lifter pump up sound! About like an inline 6 with solid lifters cold!

[@israelnieves2817]

I have the N41 cam, love it!

[@frank3stangs]

Nice!

[@wooferl7]

Enjoy all your vids, my pops is using a n41 Anderson cam in his new 306 setup. Hoping its sounds and performs good

[@Ttop_Thomas]

She sounds mean after some modifications lol. Kickass job Andrew 🤘🏻

[@alexgarza2759]

Aw man how are y’all going to end the video so soon. Sounds so good

[@Chris-Rife]

I love anderson cams and its crazy when I mention them in car talk majority of people know nothing bout anderson cams.

[@NGG1983]

would love an update on how this setup has worked out for Andrew? I have a 94 GT, GT40P 1.72 RR combo, and was thinking of going this route. What spring package did you use? doing the math on it with 1.72 rockers the lift on the B-21 will be .548/.548. The Trick Flow spring package(TFS-2500100) only recommends being good to .542 and people online typically say even that is pushing it for those springs.

[@hasaelmonty7531]

Im not going to take back what I said but it does sound fucking awesome can't wait to hear it with headers or a nice catback exhaust cheers

[@nexgencarguyscraig331]

1.7RR can be used with stock pistons and the B21. Like 2400-6200 rpm range or something like that.

[@FORDMAT77]

Sounds great after a little modification

[@TheModAddict]

Yeee

[@swamp9047]

Andrews car Is sick!!!

[@jamescleveland6775]

Nothing sounds better on a 50 then flow masters😎

[@TheModAddict]

I dont know what it is but i love to see you in your Proud moments.

[@BREW2LFOXBODY]

I’m definitely proud of how much Andrew has learned😎

[@rodneyturner3197]

Roll tide

[@francisandmarkmartinez8595]

Hello, thanks for the video! Question, if I’m doing a budget build is it absolutely necessary to install new pushrods and lifters every time? Thanks

[@champking20]

I’m looking for a nice exhaust setup. Can’t seem to find a good set for my fox

[@legit4083]

Can you do a video on the 1987 foxbody engine explaining every wire/hoses saying what they are and what they do? I would like to know what I need and what I can clean up and put aside since my car doesn’t have an ac compressor and I have some unconnected hoses laying in my engine bay!!

[@700mxzxer]

How big is your shop?? Looks pretty sweet! I’d have to use more trusses in my area for snow load lol

[@kennethelliott2267]

Man anderson cams are some the meanest sounding cams in a 302 ive ever heard. I have one I bought years ago and will use it one day!! Lol if I’m not mistaken isn’t the b21 cam favored for running a little boost?

[@LivNLo94]

That's the cam I recently put in my 93 Cobra.

[@306valenz3]

Love my N41 cam. Pulls hard and sounds amazing. Use a straight through exhaust muffler I promise you'll love it.

[@Stars-and-Stripes-]

I loved my N-41 in my 5.0 that I put in my 90 Mazda RX7 after the 160hp 15mpg rotary, I decided why do that when I can easily get 320 HP with hand ported and milled GT40P heads and it got a better 25 mpg with my foot out of it. It was a good mild cam with great drivability, If I remember right it was 224in 228ex with 112 centerline and around .540 lift or so with 1.7 roller rockers (was like 25 years ago) An old friend of mine has a first gen RX7 that weighs like 2400lbs with a LS3 and a turbo that is pushing a little over 650hp to the wheels, as you can imagine he says it is more than a hand full! kzbin.info/www/bejne/pWnYmpatrplsftE&ab_channel=Motorin

[@sonsoftheedelweiss72]

Does cams or rockers add torque or hp? Thk u

[@hrhgarage5044]

I have b21 with 1.7 rockers stock bottom afr 165 heads, 4lbs of boost, FBO and (holley)terminator x 427RWHP ON mustang dyno that b21 cam sounds awesome.

[@edgarserrano323]

B cam mafia

[@brewsky38c]

I use to run it in mine, it’s awesome

[@paulhudgins5120]

Wow what a difference, great job Andrew. Now the white spider is talking some shit, and with some better exhaust the white spider will sound so sweet.

[@jpat99]

There is no replacing that sounds these days. Nothing like a cammed V8 with a deep exhaust.

[@BREW2LFOXBODY]

Agreed 💯%

[@redman715]

Nothing can beat the sound of a pushrod small block ford!

[@BREW2LFOXBODY]

Exactly 👌

[@kenb1918]

Man I can’t tell you how many times I’ve had mopar and Chevy guys say that, just something about the sound of a SBF that just makes it stand out

[@redman715]

@@kenb1918 very true and when you put a 4 barrel on them they growl even louder i will never forget when I drove my first one when i was 8 its a sound i can never forget

[@jonathonbrisbane2350]

What is this cam like vs a comp cam xe274hr?

[@jamesherring3768]

I bought the same setup but don’t know what size pushrods to get don’t wanna use the one I took out can you help me determine what size I need thanks

[@sublime929]

I remember when I installed my fcam back in the day the instructions said not to let it be under 2500 (if I remember correctly) for like the first five minutes.

[@Foxbodyguy91]

Damn look at that shop though

[@jeremypike9153]

Decent fox body mustangs have become hard to find. When I was younger I didn't care for them very much because they were literally everywhere.

[@jeremypike9153]

Now I want one. I used to race dirt track mini-stock class and so many mustangs were chopped up for dirt track 4 cylinder racing it wasn't even funny. They were a dime a dozen back then. Personally I ran a Ford pinto chassis because I liked the suspension better for a dirt track surface it was just easier to tune into the track surface than the mustang suspension setup was. Leaf springs with shackles and double wishbone front suspension is much quicker to adjust than the struts and four link in the back of the mustangs. I love a fox body for what it is but a dirt track car with suspension rules to abide by was not a situation that it excelled at. It wasn't as adjustable to the surface nearly as quickly or easily as old fashioned leaf springs and double wishbone front suspension was. The drag strip was where the fox body excelled honestly. It came with everything necessary straight from Ford to be able to make it work well. Leaf springs are a whole different animal at the drag strip requiring much more adjustment to make things work night to night.

[@maximassiri2858]

Hi , where can I buy this cam . Can't find it anywhere on line .

[@mattmeyers81]

I know hi now andrew feels. I just put a crower 15511 in my vert and it sounds like hell lol. I haven't let it run long enough to pump up. I've heard others say just tighten them up wherever too but been afraid to hurt something. Do you even count the turn after zero lash or just tighten them up? I was under the assumption they need to be torqued down to 20#

[@jamespurvis8880]

I'm thinking about swapping Bcam with N41 for my setup.

[@forever556mm]

What is max lift for this set-up.....my heads are rated for .550 max lift....do I need to get stiffer springs for .600 max lift??...i try not to rev past 5,500 rpm. Running elbrock e street heads 2.02 valves.. pistons have the big valve reliefs....I'm more worried about maxing out the Valve springs

[@Shawn_42850]

Leaving us with a teaser lol

[@mustanlab302]

Andrew HEADLIGHTS!

[@BREW2LFOXBODY]

😂😂😂😂

[@slow5ive.0]

😂😂 Andrew was looking pissed he say it sound like rod knock

[@richfullerjr1811]

One last time before I give them to someone else....if Andrew wants some free stock headlights that are not yellow...I'll ship them to him for free....just doing it because your channel inspired me to do all my own work on Trinity (88 lx)...it's all good either way master Brew2l 👍

[@TheModAddict]

@BREW2L

[@jpat99]

Pay it forward sir, well done.

[@BREW2LFOXBODY]

Let’s do it!! He’s never gonna buy a set anyway 😂 thank you brother I appreciate that. He’ll he happy when they’re installed 👍

[@richfullerjr1811]

I send an email for your address.....ty boss

[@chaselukin4961]

I put a n41 in mine and the 93 cobra heads and gt 40 upper and lower runs good for what it is

[@jay-dee5.562]

Still has A/C too😳👍🏽🍻

[@unemployed96]

LMR please donate this man some headlights.

[@grannationalboy]

I was going to use this cam but went with the n41 when they became available again

[@chrisbeekley1887]

I just wish I could order a cam from them. They need to get their shit together and get some cams in stock.

[@UFOGHOSTHUNTER]

Lifters scared me one time I replaced the valve seals.

[@the_green_aero]

Are those e7 heads?

[@Russellsperry]

Maybe it’s just the audio, but that thing sounds like a like a model T with some extra cylinders?

[@Ohiocountryboy-se2cn]

Need to do this to my 79 mustang ghia coupe

[@luisbarrueta658]

This cam good got turbo ?

[@Lamoureuxracing214]

What part of bama y’all live in I just moved to gardendale Alabama from Florida just bought a coupe I’m building