We FINALLY break the RECORD on my DYNO!

ShopJimmyO.com
Support the build!!
/ jimmyoakes
/ jimmyoakes
Send some sub mail!!
Jimmy Oakes
PMB 169
61 N. Plains Industrial Rd.
Wallingford, CT 06492

[@Jcarney87]

Pro tip. Don’t let people stand next to your cars or dyno while making runs. Driveshaft explodes and takes someone’s leg off (or both legs) you’ll never recover from that financially or emotionally.

[@andrewperez3849]

Yeah plenty of videos on KZbin to show you it’s not a good idea.

[@SKATEPRO221]

Yeah dude and most of the time the cameras mic sounds like shit because of how close people are lol

[@Srjr0122]

Every decision has consequences so yeah hahaha

[@VolvoSubaruIdk]

There's a video out there of a a big power Nova or Camaro where the flywheel let go and the guy standing at the firewall took it to the face and horrifically passed away on the spot. Anything can happen and we don't need the boys getting maimed.

[@anarchypanky93]

@@VolvoSubaruIdk I seen that

[@OmegaMinxComp]

12:13 Steve! Don’t feel scared to cover your ears during those pulls. It’s completely okay to protect your hearing, you’re gonna need that to make music!

[@DaltonBalkwill]

Facts! Or even better, throw some ear plugs in while there’s a car on the dyno!

[@xboy4331]

This right here folks! People don't understand how miserable hearing damage is to live with. I'm 24 and more than half deaf in my right ear, I'll need at least one hearing aid by 30 because I didn't use earplugs when I should have. Using hearing protection isn't uncool, but not being able to hear your friends talk at a bar because the music is too loud is really really uncool.

[@streeto.spirit]

29 with two hearing aids here lol Not very fun tbh especially when you could hear everything normally 9 years ago

[@sprtn089]

For real, I've been hard of hearing all my life. Seeing guys wreck their hearing sucks. Plenty of negative things for losing your hearing. More likely to have severe depression or make it worse. Higher risk of dementia, because your brain starts focusing more on trying to hear. Loneliness, stress, cardiovascular issues. And hearing aids are incredibly expensive. Just want you all to protect your hearing so you don't have to deal with that until you're like 75 lol

[@Vopodop]

Being someone who has musician friends in the hardcore/punk scene PLEASE wear ear plugs if you don't want to have the possibility of dementia when you're old

[@fleuriejeanpierre]

Jimmy, sincerely you might not be on lz territory but you are hands down my favorite youtuber and I'm so excited when I see a new upload.... I thing one day you will just blow up and be on top for sure... love you bro.

[@JackThomasCollins]

Well yeah lz is fucking annoying, it’s like the guy is always on the bag, can’t even speak a sentence without slurring every word

[@spencerfernandes3687]

A heart an a dagger all in one comment lol

[@julianprice9042]

@@spencerfernandes3687 right lol, it's bc Jimmy is Jimmy on Jimmy's channel. Adam LZ uhm...isn't... lol

[@carlosgonzalez9558]

From now on I expect every dyno session to be called talking torque with Tony 🤣

[@austinhurd8138]

Tbone for the win

[@richierich9866]

You gotta do a comparison to bootlegs dyno! Tommy is out here saying ON VIDEO that your dyno is inaccurate and reads 200 hp higher than it should.

[@builtntuned6513]

That coke head also saying Jimmy's builds are half fast backyard build. The coke made his ego even higher lmao 🤣

[@daniesalex7073]

Tommy will say stuff like that

[@bryanholzer2782]

He did admit it and say that his dyno load was basically non-existent on the pulls with Tommy and Dustin so that would make sense why it's reading high. Obviously Tommy was exaggerating a bit but he was right that it was reading high.

[@hano5277]

@M Quin he knows what he's talking about tho.. your rose colored glasses for all the people you wish would stick their dick in your asshole is overshadowing the fact that a dyno can be incorrect and Jimmy has admitted it before.

[@dreednlb]

Dyno is a tuning tool. Not a dick measuring tool.

[@reyez1256]

Stevie needs a build asap he seems so interested would like to see a mini build or something nice 😂 while he learns to drive stick shift! That be dopeee

[@justinbuker7511]

Be a good chance to stir shit up and do something big body and crazy swap for big Steve. I could see him whipping a 96 impala with a 2j or an rb.

[@charlieward7606]

not to be mean but thats on steve, im sure once he commits they will all help but starting is on him IMO

[@justinbuker7511]

Imagine a road master wagon with a BMW engine slapping with the entire crew inside it!

[@justinbuker7511]

@@charlieward7606 we all have to take our own first step for sure. It's not on Jimmy at all but we just wanna see Steve riding

[@charlieward7606]

@@justinbuker7511 hell yeah i do, i love how enthusiastic he is about learning but if he is anything like the musicians i know he will be spending all his money on gear before cars haha also im guessing he might nt actually know what he wants yet, we all keep thinking he wants some big music car, maybe he wants a drift car or autocross car.. he is fairly new to it all i think and its probably over whelming all the choice

[@tag206]

Just waiting for B to come through and smash the record with a nitrous 427.

[@theunpretentiousvegan8593]

Everybody griping about the 'accuracy' of the peak number. Dyno tuning is about gathering data under load and tuning the curve, not just a big d*ck contest for a number.

[@eduardogears5259]

👆this

[@Chattsteezy]

Get this to the top

[@offgridas]

Fuck I reckon, bunch of clout chasers.

[@1990Redline]

Very true! For the tuner it doesn't matter what number comes out.. For us watching, it would be nice to see at least some comparisons and would be interesting to know how accurate it is. Not to hate or bitch about it, just out of curiosity and interest..

[@BenHut69]

Ok so I know everyone has been saying it but Steve needs a build on the channel. It would be fun to see him progress even more than he has already

[@DaltonBalkwill]

Full VIP style build on the GS, curtains, wood grain cup holders all that 😂👌🏻

[@jakelovescinema]

Actually a really good idea

[@helplmchoking]

@@DaltonBalkwill For sure. Get the Stance Consultant AKA Mike up to CT, bag it, get the starlight headliner, mad sound system and the rest. Would be super cool and he definitely deserves it, plus I always love watching a bit of Stevie

[@ahamedkhan232]

Love to see the BMW's get worked on

[@sugoi4983]

dying to see what this makes on an accurate dyno

[@codywinn1115]

May be a stupid question but why is his dyno not accurate?

[@sugoi4983]

@@codywinn1115 Jimmys dyno is known to shoot abnormally high leading most to think its inaccurate. I'd love to see jimmy debunk this rumor as a video, maybe by testing stock cars on his dyno..or his cars on other dynos idk lol.

[@1990Redline]

@@sugoi4983 would be interesting for sure!! I'm always thinking the same way and would love to see a video with some comparisons by putting his cars on a different dyno on the same tune and/or test stock cars.. We have someone here in Germany who's got a pretty big YT channel as well and every weekend he puts subscriber cars on the dyno and his dyno is ON POINT even with low hp cars, really accurate dyno and really interesting, so it would nice to see how jimmy's dyno does.

[@sugoi4983]

@@1990Redline Yup for sure, i think that would be an interesting video

[@gmula1987]

@@sugoi4983 if you go back to the video where jimmy did his first pull on the dyno at the end the E36 made 432hp on gate pressure and the E36 made 450hp on gate on derek's dyno so it's decently accurate when the settings are correct. They messed up while dynoing Tommy's car and forgot to turn up the load on the rollers. When set up right Jimmy's dyno should realistically be anywhere between 10-50hp different from any other accurately set up dyno.

[@mket_design]

Dude reinforce your clutch padel with aluminum plates add the side, make a molding with cardboard. You know how to fabricate this stuff or on of your buddy's can copy the system and make your own products. Just a honest idea. 💪👍

[@SlightlyM3ntal]

The cheat code for E36's transmissions if they're coming out a lot is just leave the top bolts out. The rest of the bellhousing bolts will be more than enough. Lots of drift guys just leave the top bolts out for ease of dropping the trans.

[@Drewairplane]

2 years no top bolts in my 36 and no issues. Lower bolts and trans mount is more than enough

[@cutegamerboy]

Lmao this makes me feel so much better about my e39 528i 5mt. One of the top bolts stripped so we just cut it lol and forgot about it.

[@placeholdername3206]

I've left mine out as well. Fuck that shit. My friend only runs 3 bolts on his 600hp M60B40. Been fine for years.

[@davemills5408]

This car deserves to be painted needs a lot more screen time. Too much s chassis content at the moment

[@TNTkix]

Bro it’s funny you say this. No other cars on KZbin get the views s chassis get. Nobody likes German or American muscle cars anymore, just Japanese. I don’t think people even love cars for what they are more just hype.

[@brando7655]

Never too much w chassis

[@ableusermcz]

@@TNTkix 100% agree bro. And out of all the hyped up Jdm cars it’s mostly just Nissans too imo.

[@TNTkix]

@@ableusermcz it’s just so boring now lol. No one really has there own style. Everybody has the same car, dames wheels, same aero kits. They all look the same. I would love to see some diversity from the KZbin creators. Jdm is overly saturated rn.

[@GutZ_47]

This is why Mike Myke is doing so well, rx7, vettes, 350z's, z32, truck content and even drift trike stuff.

[@sfieldx]

OH! My favorite hoodie as a black tee?!! 👀😍

[@ImJoel]

i absolutely love my twin disk in my e30. its so much easier to drive than my stage 3 6 puck in my e46

[@TeodorGorranov]

Yo good to see you in the comments, had to be the BMW :D good luck with the E30, hopefully soon we can see another crazy door dash vid!

[@BushWookie603]

So funny. The first rip on the Dyno I was thinking to myself " that thing ramped up the RPMs a little too quick" haha gotta put that load on it boys

[@shecter2003]

Another great video. Love the knowledge you are giving while explaining why you went the way you did with the clutch and about the turbos.

[@colbywtff]

Jimmy your content has always been my favorite on yt love the mix of content ! Talk to me nice is a great addition as well keep it up man!!

[@mateenraza5959]

So sick, super hyped to see the e36 getting some love!!! cant wait to see this monster on the track

[@Coda5610]

Yes test it on Dereks dyno also

[@alansmith3168]

Torque, torque, you need it in your ride, when going for a drive, and sliding is your vibe

[@koenpolstra6060]

I wish Brian was more in the video's i love that guy 👍🏻

[@inkscars6380]

Honestly that seems like a great setup great numbers to have a super reliable runner!

[@rickyharrison4431]

Jimmy you need to get on the cleetus comp He's giving away a 76mm precision turbo every day for the month of freedom

[@OmarE36M3Turbo]

You should taper the tq down making so much tq at around 5k the harmonic are not so happy. My engine didn’t lasted more than 6 month pushing 871whp

[@adrianharrison5176]

Always good when Jimmy video out

[@night5738]

Bhall 😂😂 “I gotta go back to work” *in the next clip*

[@plantedrabbit3]

its amazing to me more people dont build these or swap them into other cars, such solid engines. been following this build since the beginning and its sick to see where its at now

[@_WildSteve]

“Some things on it suck to do” LIKE THE STARTER JIMMY. LIKE THE FUCKING STARTER

[@drewdavis239]

Why does the starter suck? Intake isn't that bad to pull

[@_WildSteve]

@@drewdavis239 We didn't pull the intake. We did it from the bottom when we were taking the trans out.

[@TEXASE36Garage]

Now we’re talking! Love the e36 content!

[@blakegaumer6188]

ayyyy Jimmy serious stufff thank you for 1440p 60f!!!!!!!! love the extra clarity when watching my stories lmfao

[@ecarasig]

I love this car and that setup. This is how dyno plots looked in the early 2000s

[@CapturedVisions]

not having the load curve on is why Dut and Tommy's cars made 600

[@nytovaok516]

glad to see y'all poking at different projects in the shop over the past few days

[@DynocomNet]

Amazing work as always from Jimmy !

[@R32ONP]

That thing sounds insane with more boost in it

[@chillwil7292]

The hype was real on this one B.Hall was loving it Ant was living the dream EZ Stevey was in tune with the Dyno Gods and Jimmy was the mad Scientist 🙌🏽🙌🏽🙌🏽🙌🏽

[@inkscars6380]

@Jimmy Oakes just get an aftermarket pedal assembly that or fabricate a solid pedal even if you need to use part of your own pedal???

[@macnsteezzz]

Been waiting for an e36 video!! Just got mine on the road again

[@Chaser_Chung]

You should make some whistle merch lmao nearly every video you whistle I think that would be fun👀😂

[@kameel4203]

Love to finally see the e36 ripping 🤌🏼♥️

[@mikeenz8]

dude these 1440p 60fps uploads look nuts, I really appreciate Jimbo putting in that extra rendering time for the high quality content

[@brandon_doe]

I build cars with 3” exhaust up to 1k horsepower. It ain’t restricting as bad as you think

[@milkdudpresents8126]

Power seems spot on buddies built motor made 727hp and 650 torque at 27 on his e36 but his was a 2.8 with s52 head and cams

[@hyper8545]

Thats a hard hitting curve. You be taking home all the link slips with that sht back in the day 😉🤙

[@AudibleVisibIe]

5:20 I see Steve with the future quote

[@noahbake]

U gonna let Tommy try u like that. Need a build to show him up

[@zackscott3812]

Get nitto 555 g2s my stang has 275s on rear and is hooked up

[@justingould3891]

T bone gets a F for camera operation today. Glad your finally getting to tweek the red BMW.

[@liamflynn4137]

Kenny be the goat. Miss seeing him in the videos. Man taught jimbo about tuning

[@nathanfarrell1116]

Id love to see you go bigger turbo, make this the jimmy oakes 4 digit hp car. Make it hook and run against adams barra mustang.

[@brandonstevens1268]

youre drive shaft is gonna be next to break i would replace that asap with a solid one from Drift HQ man also stock up on rear axles they love to break under high power as well

[@bikebird4]

If I’m right, M3 USA has solid axles 27mm M3 Europe has solid 27mm (early) and larger shafts hollow (later) M3 Evo has even larger axles but are hollow also I actually think his axles will hold up. 335d which have monster torque have solid 27mm axles so I have a feeling they will hold up. I could be wrong.

[@brandonstevens1268]

@@bikebird4 i just hear so much about e36 axles and driveshafts breaking but hey if they hold up then theyll hold up

[@PaceWorks]

I'd love to see you compare 2 or 3 dynos with he same car 💯🤙

[@TeamWagy]

“It’s definitely got some more juice in her, and I’m ready to squeeze it out” love that

[@ohgzone]

Dont you have a 5858 on your k swap s14? might have to steal it rq lol see how much power the k series makes on the bigger turbo

[@randybryant9936]

glad to see you got it done

[@charlieward7606]

arent you going to make way to much torque on a smaller turbo? should keep it high HP and use it as a roll car IMO

[@drewdavis239]

Super high emap will hurt his power with a small turbo. Anything under 62mm really chokes a s50/s52. Yes e85 helps, but your stressing that motor way more with 50+ psi emap. Imo. Solid lifters. Twin scroll manifold/turbo. Spin it to 8k 8500. Make 850 easily.

[@quadsquadfamily7484]

Brian's mouth was about to say "you can hear when a motor is about to Bbbl-make some power". 🤣. You could see the B in blow up coming when he said make some power instead 😂

[@TheGoodMedicine]

I think it is a nice change you don't need a smaller turbo

[@mugensohc2.271]

Hands down sell something jimmy and add twin pump full line kit and fresh gas n let’s see 700!! 👏🏽👏🏽🚗🔥

[@eliasspeed5882]

I’d just do a pedal box, Ik that’s more than just the clutch pedal but im sure it would be worth the upgrade

[@BenjySparky]

Jimmy and gang y'all rock! Love the channel and content! I'm here for the algorithm! Peace

[@gokartsRfun]

Lunch time Jimbo is my fav

[@stephenvoorhees7951]

i wanna see what power nissanda is gonna make with that ported head. id like to do something similar to my ka if it makes good numbers.

[@michael_garrett4048]

I'm on team big turbo make all the power

[@jacobtheyers913]

Looking like the mighty Barra’s torque curve ❄️👌

[@bigdadgigachad3042]

Tommy says your Dyno adds 50+ HP so it's not accurate. I mean I guess an inaccurate dyno is better than no Dyno at all though. Anyway to correct this or would you have to upgrade your setup?

[@MrPlasto1211]

Yea Tommy a shit talker who makes comments without any proof to back it up he can't be trusted

[@durnjulio7684]

Love when i get that at&t commercial shawty fire

[@tomjasinski5334]

Early bird gets the worm!!

[@Thejrod_]

Just in time from my lunch break🙌🏽

[@stevefrench6733]

happy to see eddy

[@MrPatrik246]

I would love to see dyno comparison with bootlegs dyno

[@5IMON5AY5]

With all this dyno usage you need a big F.O tv on the wall so we can see the dyno figures better haha

[@ttopsnturbos]

4:40 Forget slipping clutch Jimmy out here tryna slip a disc...

[@Danielism]

Can't wait to see some meaty tires and more fuel. This car is sick! I feel like you found a Supra 😉

[@tonsixerauto]

I'd just switch to a bb 6266 or even a bb 6262. Either way it will help spool big time! A 5858 is gonna be way to small for that set up

[@drewdavis239]

This

[@nissanskyline4892]

wirth getting up at 430 am🥳

[@thefunkosaurus]

5:22 "Hit it from the back." Oakes '22

[@JNortonRacing]

I wish bhall was in some more videos. I like his comedy and character

[@harrisoncoulter1]

Jimmy… I’ve got a 5858 on my m52 and I’d suggest staying with a bigger hot side

[@drewdavis239]

His 66 is about right imo.

[@johnsontaipari4807]

Patreon gang where we @

[@dannyipwn1203]

Jimbo, i know you remember me telling you i have your doppleganger car but its left hand drive. we have the same exact turbo setup. same exact car setup. but i recently had to 1 up you my boy! G35-900 has been equipped... listen to your boys. G SERIESSSSS

[@Mr889236]

A RHD e34 clutch pedal might be able to work in an e36 with a bit of modification

[@noahbake]

DJ rubbing off on you. Starting to whistle and move your hands like him

[@gtgodbear6320]

They should make a clutch by wire and be capable of adjusting the pedal stiffness to the drivers likeness. I need a really lite clutch.

[@drewdavis239]

Pfi speed just released something similar today (slipper clutch but still)

[@jordanb2908]

Rumour has it jimmys dyno reads high. Take away 150hp

[@haydengovender408]

I'm from South Africa Africa ur vids I'm 16 🇿🇦

[@SuperBigNye]

hey jimmy you should look in to a quick spool valve. this will shift spool up time this is what i run in my supra and lights up my big boy s475 by 4k full spool. your turbo is small so you would beable to spool up 800 to 1000 sooner. the brand of quick spool i use is sound performance.

[@drewdavis239]

Twin scroll ..... quick spool is just a bandaid for a missing twin scroll. Also, he runs a open turbine housing

[@SuperBigNye]

@@drewdavis239 mines a open turbin housing you dont need a twin spilt still thats the whole point of the quick spool valve it has the split made in it.

[@PandamoniuGaming]

I've hit you up on Instagram about finding a metal RHD clutch pedal because I'm in Australia and it's something that's pretty common in Australia, you just never saw the DM lol

[@Hammy_J]

If I remember right from a long long time ago this build was the “fuck it I want to stupid big HP number” so I say screw it and send it to the mooooooooo !!!!!

[@Onthelimi]

When rudnik finishes his e30 you should race him

[@glockoma2822]

Jimmy you should throw this thing in Alpha Class at Wolfsgart that would be a hitter

[@scorchpowdispenser]

Letssss freaking goooooo always stoked for the video drop Jim

[@ryanb4819]

since you're gonna have to wait for a new turbo you might as well get them fenders and the m3 wing we all know you have color matched🥰

[@Tyreakmcgregor]

Driveshaft might be next

[@joelhackwood2669]

finally back to the e36!!!

[@rufinoperez4416]

E85 is up and running at that gas station off exit 28 on 84

[@patriklenck1735]

FINALLY E36 CONTENT!!!!

[@calebhousley7185]

I'd love to see you slap a gtx3076 or Borg s257sxe on it. I have a s257sxe on my ka-t and for a journal bearing turbo, it kicks in pretty hard. Or a Garrett g-series,