We Put Our Turbo Mini Jet Boat on E85 and Gave It the MOON TUNE!

[@MafiaboysWorld]

We need a "gym trainer reacts to my K-swapped jetboat" video. C'mon Kyle, do a solid for the boys. 😉👍

[@ryanboytim896]

OMFG This comment had me dying. That girl has a god damn dumpyyyyyyy

[@ryanmcelderry3320]

😂😂

[@bbhunter2220]

In a bikini! Thong bikini preferably 😂 🥴🥴

[@dagnabbit8691]

Wyatt should take her on the ski 😎

[@NoReverse77]

This should be pinned

[@Muskokajames]

Fuel tech certainly wasn’t wrong for getting you guys on board! Great work on this thing, such a cool build🤙

[@pghjpc]

Should really get at dry sump setup and a piston/rods motor for this thing! Put the oil tank on the passenger side to balance weight too

[@RadDadisRad]

I can’t wait for Brent to experience the jet boat at its best.

[@DerMoos]

The 2 top comments being about Brent and Gym Trainer reaction videos shows the duality of man. Coomers and Brent Enjoyers

[@hank_green]

He needs to run it like the NSX video 😂 Brent is awesome. Such great energy

[@christophermcguire9921]

Kyle you need to make a video like cleet djd about defending the drag strip n the race track man!

[@pw383426]

You guys have built an amazing first time jet boat! I agree with the pump tuning, that will make a world of a difference getting the combo to work to its potential. Also, I have a feeling ya'll will find 70+mph in the next year, once you get their please start wearing life jackets! Those little jets will pitch you right into the gunnel if they lose an engine at a certain speed

[@misterme2448]

THIS @BoostedBoyz

[@Jacobtheunwise]

Pretty sure the main thing slowing then down is the design of the hull. Dont think the hull can physically get up to 70mph

[@Jacobtheunwise]

@Barry Allen no its not lol. The pumps at its limit and the hulls arent designed for top speed. If they manage to get it to 70mph it will take alot more power or a much better pump

[@pw383426]

@@Jacobtheunwise if they had a pump setup to get it up and out of the water, the engine/pump doesnt really care about the hull that's on top. But you're right, not designed for high speeds. Once they get going fast enough then they're one failure away from the boat making a sharp turn while they get ejected. But still amazing build either way, just want em to be safe!

[@cajampa]

@@Jacobtheunwise I am not so sure it will be that much harder to go much faster, they still can turn up this engine a good bit more and a fully built K series is up to 3-4 times stronger than this. They have a LONG way to go before they run out of power. And i am sure they have planned it out somewhat with the pump guys for that. But whatever happens it will be a fun journey to see what happens with Cleetus and the boyz one upping each other. What i am wondering is how fast can these hulls even possible go before they just goes airborne and flips? I guess we'll see about that and I second that wish to see them using some protection.

[@jeremyeverest9987]

Positive pressure the engine compartment with a digital thermo fan placeing on the frount of the engine cover between the rear seats and a cover with an opening at the bottom. We have had to do this with 475hp diesel engines to stop them from cracking cylinder 1.

[@edlebrock3501]

Man yall have built the best jetboat I've seen on KZbin so far!! love it man, yall did such a great job with this and LOVE the content on it!

[@dustyc324]

he boats cleet was running this summer were gnarly. Small block powered sprint boats.

[@edlebrock3501]

@@dustyc324 Very True!! On another level for sure. As a non pro. boat though, this thing is sick! To be honest im hoping cleetus is working on getting his own race boat!

[@wcovey25]

the jetboat has been a sick project, it looks like a blast to rip it

[@ArlenTattoo]

It’s so dope seeing this build turn out so well with minimal issues 🤘 this one is a huge W my boizzzz

[@802Garage]

This is nuts! Definitely proof that oilless turbo can work too. Good stuff Boiz.

[@thomasmurphy5906]

I can't believe how good the k-swapped jet boat turned out, excellent work guys

[@claytonbaker5858]

Down the road when you get board of the boat, look up a dude who put a glider on his boat, would work with your size of boat.. Works crazy stuff..

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️...

[@Dkctransam]

That’s so funny to hear Christmas music in the background while putting gas in your boat!!! Florida life!

[@Kins_88]

Pretty sick!! Good to see Wyatt back on.. it’s Time for a mini jet boat racing series. A boostedbois Circuit racing and time attack event. No haul modifications.

[@jamesjackson4270]

Glass for sure glad you were lucky enough to send it on that! True reading 😊

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️.

[@cjstillman122]

Definitely do the impeller soon. I think it should help quite a bit

[@drowe910]

Hey I was at PRI with my company, we had the green shockr foxbody in the pro systems booth. I didnt know the truck was going and was very surprised to see it in person. great job on the truck wyatt i cant wait to see it rip down the street.

[@angushoover8670]

2° wedge on the pump, bigger impeller, bigger fuel pump and cool the waste gate, I'm betting you would push 80+ mph. Once the pump is pushing back instead of up, you'll be much more efficient. Great job so far gents.

[@pw383426]

This is advice from a jet boater! It sure does ride wet, imagine how much more speed in pump tuning alone...

[@brandonbritt99]

love that you let the guys rip it so awesome to see there reactions after they felt the difference

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️....

[@kraftzion]

Love this build, the battle between you and Cleetus is going to be epic! I woild like to see you import a Thai Longtail boat to see what it will do compared to a jet ski,etc. It finally dawned on me why they all use diesels. No gearbox.

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️..

[@jimmyboe25]

Not all of them use diesels but a lot of them do. I seen a video of a guy that said the fastest boat they had wasn’t diesel but the diesel was still deadly fast and sounds/looks cool to boot

[@S14lopez1]

Definitely need to start wearing a life jacket in that beast and get a nice mount for the fire extinguisher and get an auxiliary battery for the other side and some stereo

[@bradharrington7051]

With the other impeller i hope it can do 69mph. I’ve been enjoying all the wild content. Keep up the good work

[@204_jseries6]

Boosted Boiz.. first to sink a Jetstream throwing a rod!! You guys rock!! Keep having fun!!

[@NickPDX22]

Sick! Get old man Cleet to build a course at the FF!

[@uurkisme]

I'm sure it's already being discussed and worked on.

[@Synthetic-Chicken]

As a Kiwi and being luckily enough to grow up around jet boats and river racing, this is fucking awesome, was mainly always 302s or 350 chevs used but I'm going to share this around in hopes people think differently when they build their next boat for the season. We've used various V6s and V8s and only ever saw the odd rare turbo or 4cylinder boat. One guy did it with a Subaru WRX motor and the thing used to clean up until V8 fuel tech caught up.

[@teamempressive7730]

Safety first kids, hope to see you guys with life jackets and possible helmets on the next jet boat episode. Grate content as always.

[@derangedrebel3898]

Jackets for sure

[@jacob1423]

helmet? tf, i get the life jackets or at least having them on board

[@dirtayk6742]

My thoughts exactly. Been boating for over50 years and wouldn't get in a boat without a fire extinguisher! The only thing worse than fire on a boat is sinking!

[@jr4575]

@@jacob1423 ever hit water at 60mph? May as well be a concrete wall.

[@TheBCninja]

@@jacob1423 there's a reason why a lot of pro wakeboarders wear helmets. Water isn't soft.

[@SloppyMechanics]

you can get speedometer apps that keep your highest speed making that easier, awesome project

[@tnebbie3230]

Awesome set up so far! Probably help a lot changing the impeller but also would help a tremendous amount if you could get some more trim out of it which will help it lift.

[@heisenberg3868]

He’s gonna gain so much with his larger and pillar he has a horsepower he just needs to move more water now

[@stevenperron2502]

Kyle and Wyatt are batting 1000. Everything out of the park. Keep it up boys. # letsgo

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️.

[@fl3xable1]

9:50 we witness Kyle’s confidence when he speaks and knowledge about the setup legitly

[@baltazard133T]

If you're going to keep squeezing more and more power out of the jet boat you need to squeeze about 5° to 10° more angle of downward trim on your nozzle adjustment. Also wouldn't hurt to file down the steering stops to get just a bit more angle to help keep it under control with more power. If you're going to add the larger steeper impeller into the jet drive you also have to add a larger grate as well otherwise you will cavitate the crap out of the pump especially with the shallow available trim adjustment.....

[@InvaderSS670]

Nothing is scarier then overstuffing the pump and the machine just up and does a 180.

[@larrysgarage1682]

Don't forget the regular required safety boat items! Throw able floatation device, life jackets for yall passengers, flares, extinguisher etc.... I know you usually ride rivers and swamps that are 2 ft deep but you never know... cheers! The hatch did amazing at cleetus spect. drags.

[@dustyc324]

being knocked out or knocked around can mess you up in the water. flotation device brings you up.

[@alexkitner5356]

Have to think that there's a lot of torque left on the table as fast as its getting to the full RPM. Really need to change that impeller and add that pitch to take advantage of the power but I wonder how much of an issue cavitation will be with the way that K Series can break loose of the water. Its an inevitable issue and am interested to see what kind of solutions there are to keep the boost in check when that impeller starts making steam. Its definitely trimmed better with Wyatt in the boat, need to dig those old sand bags from the MR2 and shove those pillowcases up in the bow.

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️...

[@javi-air]

More prop and more boost will definitely get you to 70. Careful overstuffing the pump. Speed gains to be found if you get can get the hull out of the water some, especially with 2 people on. Super cool project. Awesome.

[@e36er4life]

Exactly the boat is plowing

[@TurboMusicArtist]

From drifting a Wago in the snow to drifting a honda powered boat, its crazy how far this channel has came.

[@AndrewLane87]

I love the friendly competition between you and Cleetus. You should try out that other impeller soon, it might be a game changer. 75+mph coming soon!

[@josteincarlsen2905]

Love it!!!! Life jackets should be on at those speeds. 👍🏼👍🏼👍🏼👍🏼 best build ever!! Air boat next!! 🫡🫡🫡🫡

[@michaelpeter9710]

Now Cleetus gone make sure he has More MPH Before racing you 😂

[@shawzymusic]

They’re sandbagging

[@dustyc324]

@@shawzymusic Impeller change to match the power. They need more trim control too. Not to forget, small hull and overall small craft, probably close to the safe limit before it walks out of the water and becomes an airplane.

[@WhatsIncluded]

​@@dustyc324 doesnt cleet also have a better understanding and knows how to use the trim controls better?

[@Crob56]

@@WhatsIncluded Cleet has more trim throw

[@Jake_Hamlin]

Cleet will have a jet sprint boat in 2023 that’ll be way faster than kyles boat. And Kyle will buy a jet sprint boat after driving Cleetus’ and put a 1000hp built K series in one of them. I’d bet on it.

[@josevega2399]

I Feel like Kyle is trying to take Cleetus out in every type of race. Love it

[@ZeD69420]

Looking forward to the turbo k swap air boat even more now.

[@ruikazane5123]

Oh boy...Cleetus gonna get some Gapplebees by the water...unless he watches this video! Getting the better oil pump for the extra revs (or put the other impeller in there) and mo boost! Good luck on that race!

[@BentTreeFarmPa]

Actually for speed, you want a little bit of chop, to break the surface tension and the boundary layer to the bottom of the boat by letting some air go under it. "Glass" water kind of makes the boat "stick" to the water and slows it down some.

[@Larfinkle]

This.

[@bradwilsey9426]

Bad ass! Keep in mind boats can flip in a heartbeat at high speeds. Get you some boating helmets.

[@Backupnow-gf7wb]

Nice job guys, I would ADD a additional hole in the engine cover for more AIR flow for the turbo, just thinking it may need it now 🔥🔥🔥🔥🔥🔥

[@jasonbernal9348]

Small scoop similar to what you'd see on the top of a formula one car.

[@davessparetime83]

Trimming the Jet drive up so the water shots up cool, but Jet drive isn't all suction. Just think if the water being shot up is being shot lower at the water line? You pick up more speed. This will help because trimming doesn't seem to raise the bow up at all. Find the sweet spot. Try a 2" increase in impeller pitch.

[@brandonsnell3977]

Thanks for the hard work boys

[@rickybailey7123]

The rooster tall is huge looks like it's over a houndred foot behind the boat so cool I've wanted 1 for years they are priced so high !!

[@JMBdevotee]

That is absolutely flying in a little boat like that. Can't wait to see the jet drive get dialed in!

[@chrisbraggins4173]

Awesome work, love the jet boat videos, but if you broach it you will get thrown out hard. Life jackets might save you. Plus I would look at some padding for around the windows. I was in a race boat when it broached and it was brutal, we had full body life jackets.

[@alextreme093]

Love these jetboat videos so awesome. Keep it up hope you guys keeps pushing the platform even further.

[@danielbargas3377]

A lot of going fast on the water relates to fluid mechanics. A impeller with trim optimized for speed along with a different stator and nozzle should have it going easily in the 70’s with the same power.

[@joelblair8339]

Lol, it's killing Cleetus that you are smoking him. Can't wait to see what he did to keep up.

[@OldCarAlley]

Yea 64 is screaming on the water. I love your boat! Looks like a blast.

[@codyallen9188]

When you change that prop pitch that thing is going to be insane and imagine if you could trim it up like an outboard crazy!

[@jonnooney7102]

Don't forget to check the health of your impeller. If the clearance gets too big you will give up a lot of speed. Rigging is more of the game than engine in boats !

[@BrandoInIowa]

Is Wyatt going to make a diesel full size jetboat now?

[@bobaque70]

4BT Cummings would fit in a boat this size!

[@bdonkulousgames8562]

@@bobaque70 That would be sick

[@BrandoInIowa]

@@bobaque70 it just makes me think Idaho trip with cleetus in an enclosed full size jet boat 🔥

[@rileyklassen7953]

Use a TDI

[@mathewskaggs3955]

M57 is the best option

[@chrissraceporting7055]

Upgrade the prop and it should stand up a lot better. You have the power and rev range to make the changes

[@budddove6480]

I've legit been waiting for this video. About to take an oil blast or two and hit play. Rock on 🤘

[@ThomasJoseph315]

Seeing how you are in Florida and all... What about turning the Razzle Dazzle into a Hydrofoil boat?

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️...

[@floppydonger1189]

love the jet boat but imagine if this set up was in a hull that's actually fast

[@numlockkilla]

Tom's boat

[@jaycecarr3909]

This

[@robboss1839]

Yes but also no. That’s definitely making enough power for some speed in a fast hull but I love the abuse that this rig can take. The jet boat river ride videos in places like New Zealand and Alaska sold me on these jet boats years ago.

[@Matty.Hill_87]

This engine setup in a jet sprint Hull would be Interesting

[@floppydonger1189]

@@robboss1839 absolutely man. i agree actually. Philosophy of use right.

[@watahyahknow]

one thing you could still do is build a low wide and custom made tank sitting under the floor underneath the seats , it should balance the boat better no matter how mush fuel is in it and its out of the way of the hot parts on the engine the only thing i can think of is that the tank can spring a leak if you start running over treetrunks and stuff causing the bottom to flex and hit the tank another option would be a tank above the floor under the front seats replace the seat raisers with a tank across the boat and now we wait for jh diesel to build one with a light fast running diesel maibe a vw tdi or sumting like it (cummins probable be too heavy for a boat that size unless he uses the 4 cilinder version out of a backhoe or sumting )

[@Miggylocz]

S/O Wyatt for doin watchu do man. 💯👍

[@typicalscotland2008]

Fix floatation bags on your boat and pull handle to activate them. It will save your ass if something happens and it's going down quick. Small tank of air and 2 bags it's a no brainer

[@jeepercreepers2]

1,000+ HP Race jet boat we need it ASAP HELL YEAH BROTHERS !!!

[@lsucody3687]

The growth adding Wyatt proved the risk is worth it. Add second Mechanic and continue super growth

[@onelogue]

Can't get enough of this jet boat content!

[@markmeffan4830]

Well done deal. You got the baddest unit in the crew. And you are just scratching the surface.

[@ominousynth]

The race is on and Cleetus starts pulling on them - Kyle slams the lid of the laptop and hits the NAWS button on the steering wheel - a random sheet of diamond plate flies off as the jetboat starts pulling ahead.

[@balljointfd3s]

I love this Boat!!! I want to see what happens when you let it just sit a 8K RPM! Put in that Type S Oil pump, some roods, pistons, and just let this boat eat! I want to see 70MPH!!! Maybe add the Piston Oil Squirters back in and a oil cooler?

[@anthonyestevez118]

HELL YEAH BOIZ! One of your coolest builds! Way to go Boiz!

[@donaldchapman4312]

Good to see you out there actually using the toys you build, it’s a joy to watch.

[@corporalclegg914]

I’d like to see a top speed run with the middle window open next time. who knows what that may pick up MpH-wise.

[@solarfunction1847]

@ BoostedBoiz Hey Kyle you might want to invest in one of those $60 USD 85mm Waterproof GPS Digital Speedometer Odometer Marine Gauge for Car Truck Boat which shows all the stats needed as well as having a compass for your jetboat when you are driving through the river & swamps there.

[@rx7brad13b]

Loving the build guys !

[@zbeasty]

Can you not get a GPS sensor that plugs into the FuelTech to give you speed on your dash? Either that or a $25 GPS speedometer from Amazon seems a bit safer than driving 1 handed at ever increasing speeds.

[@swazi5]

You should make an updated version of the intro, that would be sick

[@uurkisme]

I'd actually like to see an occasional video with some of the OG intros

[@keefespencer1173]

If you plan on keeping the boats tune turned up or you plan to keep turning it up I would atleast put an engine diaper on the oil pan to keep everything contained just in case it does huck a rod it's important that It doesn't shoot a rod through the bottom of the boat and then that opens up a whole new set of problems

[@kennypool]

I can live without the extreme close-ups

[@HFG]

Once you put the more aggressive impeller on it it'll be awesome. More load though.

[@blaznmax8877]

Yo get some life vests

[@jts1986]

Ol cleetus is going to need to put a coyote motor in his jet boat to compete! The Jet boat is badass guys love watching these videos I don't ever miss any.

[@FJB2020]

With all these constant giveaway mentions and the economy in the shitter.. I wonder if no one is buying gear, making these giveaways not as lucrative as they once were..

[@bryandepiazzy8679]

Now you need to pitch the pump up to get the front of the boat out of water more. Less drag more speed

[@nicholasspeke3808]

You've built an absolute ripper boiz 👌👌 Worth putting an oil baffle in the sump, type S oil pump and potentially a water cooled oil cooler? And maybe a fresh air feed from the side of the boat into the turbo?

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️...

[@jakelance6]

Once you guys actually figure out the trim system you will gain at least 8-10mph. The bow is riding way too low is the water!! The front 2/3 of the boat should be out of the water on WOT.

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️.

[@chrippaaa]

Congrats! Looks like alot of speed can be gained by getting more of the boat out of the water maybe with trim or shifting the gravity aft. Lots of drag the way it rides

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️...

[@mfd4505]

Get the bow up some, on top speed run. Will pick up speed if more boat is out of water.

[@PrinceofWalesisland]

Loving the new vids! Need to get Brent out there with you, I miss the Boosted Boy/PFI collab!

[@mythiccycles]

Cleetur... bring it! The Boiz are gonna smoke ur jet boat! The Boiz are gonna have to set up Jetstream racing series, like Cleetus does The 2.4 hrs of Le Mullet!! 😁

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️..

[@mikeh.748]

Ole Cleeter. That's pretty funny. You guys have that thing rippin. MORE BOOST!

[@THatChevyguy91]

Think the boyz need to come up to the PNW and try the sprint boat races out .

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️....

[@XLTJeff]

just wondering what's the plan when you kick the Rods out and put a hole in the Hull when you're in Alligator infested water ,so a Scatter Shield for the Hull ?

[@austindodson2541]

In case anyone has a crv with the k24a1 and wanting a coil cover, they do fit even though the website doesn’t mention a k24a1. All you have to do is remove the 2 stud bolts for coil packs & replace with normal bolts without studs.

[@philb5593]

That boat is ripping! Glad you're having fun with it.

[@Enz3d]

i wouldn't be changing the impeller for more speed, you have to remember its a jet boat not a speed boat and the top speed gains you'll get are pretty minimal compared to what you'll loose down low. you want that acceleration for technical traversing rapids or turning hard and getting out of the hole fast or even towing. youll appreciate it more in the right place that they are desighned for, get Garett and Blake out on a river exploration with some rapids and youll understand it. Im from New Zealand so we grew up with jet boats as its where they originated from, they really are designed to do other things other than go fast.

[@japhethfaucett9923]

The boat is ripping and some how it feels like it’s not over done! Can’t wait to see y’all smoke cleet

[@Thatwasepicvlogs----]

Thanks 🙏🙏 for watching & leaving a comment ✍️✍️ Winner💯dm to claim your prize 👌 Telegram only 🎉️🎊☝️☝️..

[@maxiumgolf1]

Nice build boys. Since you know the limitations and want to go more. You should consider tearing it down, check things out and upgrade the oil pump since it’s in part.

[@Moneyboy861]

Hey Kyle, I know you took a break for like a whole week but like when we gonna get new video bro cause I can’t wait any longer

[@billmurphy604]

A little ballast in the rear will help raise the bow at WOT, should increase MPH.

[@thtsjon4u]

Glad to see you could fit a inline 4 car engine in. I opted for a different brand that offered 14ft kits. Just to be sure.