We're Almost Ready For A First Start!!

[@rhyswilliams695]

You need a Sema hook up! This rig deserves to be on show 🔥

[@austinniemela]

@@rhyswilliams695 that would be awesome!

[@skippersautomotive]

Yes let’s get this rig to Sema.

[@austinniemela]

@@skippersautomotive let’s do it!!!

[@tylerandrews4961]

The attention to detail is what makes these so much fun to watch! Seeing you build a classic muscle car would be great

[@StormbornJKU]

Seems like a super complex system, but simple at the same time. Look forward to seeing how it performs!

[@xWeaponOfChoicex]

Great work. Fingers crossed you do a LC/LX build! Would be awesome to see your take on an overland rig!

[@doyourbest7655]

Keeno beautiful work. Hey on your steering box in the front the hoses are bent over even with the 90’s on them. I had a tighter problem and a solution was to put the first adapter a 90 fitting going perpendicular to the hose direction, then the 90 degree hose fitting allowed a swing to whatever angle I wanted, and it laid flat without stress. I struggled a while for my solution, but had to have it that way. If you have another fitting around, try it as an interesting solution next time. Thank so much for sharing your build. Doing the same but w/o the budget or tools. Your work is inspirational. Thanks, The videos have to take a lot of work to make and share. It is appreciated.

[@austinniemela]

@@doyourbest7655 thanks I’ll look into that!

[@benellsworth9999]

The smallest stuff that takes the longest but makes it look the best. Good job man can’t wait to see it run.

[@oakleyjack7600]

Congratulations on 250K Austin !! Hard work pays off

[@austinniemela]

Hey thank you!! I appreciated that!

[@kflo1219]

It’s like Dr Frankenstein crossed with Chip Foose crossed with Picasso😂👍🏻 Your work is above and beyond!! And THIS is like waiting on Christmas morning?!😫😂

[@ronthompson2366]

One step at a time. Don't rush now. It looks great and just keeps getting better. The more I watch your builds, the more impressed I am with your attention to detail and fabrication skills. I truly hope that you enter a new or take your current build to SEMA. You absolutely deserve a spot in the show. Alright, looking forward to seeing what's next. 😎 👍

[@austinniemela]

@@ronthompson2366 thanks man! It would be awesome to bring it to sema!

[@kevinguay8417]

I’m getting so excited for the finish!!!

[@mjo326]

Wow, beautiful build.

[@SubePelayo928]

Your build motivates me to do mine! I’ve been working on a 1984 4runner. Just need time to do it! Keep you the good work!

[@bryansaunamatictm7686]

I'm usually here for all the fabrication you do 💪🏽

[@nonsequitur807]

You're eventually gonna need a PSC pump n big hose kit to keep up.

[@bogotstogoskiing]

I LOVE IT! By why'd you paint it black? :P

[@peterp4319]

I love the video editing and music. especially the way this one ended. really cool

[@austinniemela]

Thank you!

[@van111111111]

Do you know how many hours you’ve got into this so far? Beauty project.. Not sure if you’re a data guy at all but if you have the info, I think it would be neat to add a short section to every video with a sort of time spent total, or some sort of tracking that you find relevant. I know I’d enjoy that!

[@austinniemela]

@@van111111111 Man I do not want to know hours! It’s been over a year at usually over 40 hours a week!

[@BuckCity229]

4l60e needs the biggest best cooler that you can fit to stay alive.

[@gharebow]

You gonna do something for the throttle body late Remember that 😊

[@Mr_Ruhl]

What made you go w\ tube and fin vs a plate and fin on the coolers? From everything ive heard the plate and fin are much more efficient. I'd especially go that route for the transmission, they need all the cooling they can get. One of the biggest reasons transmissions have issues is because of heat.

[@austinniemela]

The biggest reason is space! Seems like most plate coolers I found were thicker, and I only have 1" of room up front! Both coolers I have are 3/4" so it still tight but will work! I hope they will be ok!!

[@douggrunberg]

Always love your videos!! Thanks!

[@saad0981]

Thank you very much for your great effort. Your speaker from the Kingdom of Saudi Arabia. Keep it up

[@CTMadModz]

Spectacular work bro

[@austinniemela]

Thanks man!!

[@rosswheatley1577]

Good job, bud

[@austinniemela]

Thanks!

[@norcoredneck]

What no powder coat on the heater hose and throttle brackets? I’m shocked.

[@v8felon]

Dude nice custom pitman arm

[@weshipitjamaica4354]

What was the technique you did to cut the Cable?

[@austinniemela]

@@weshipitjamaica4354 torch the cable fed hot and spin it with the drill. It welds the end!

[@weshipitjamaica4354]

@austinniemela very innovative. Thank you for replying

[@ToolsInAction4u]

Get this man more views

[@nkanyisontuli714]

Excellence as always.

[@Linkx1136]

Not sure if anyone has asked, but are you and Devin Niemela related? Y’all look surprisingly similar, could definitely be brothers

[@austinniemela]

@@Linkx1136 yes we are brothers!!

[@Linkx1136]

@@austinniemela you guys are killing it man, happy for ya’ll’s success! You have an incredible attention to detail

[@austinniemela]

@@Linkx1136 thanks man! Yea we can be a little picky at times 🤣

[@marceloquerci1752]

Sos un genio bro

[@martin-marcin971]

Best regards from Poland!😃🇵🇱👋 🫶

[@seanmcken4697]

How does the transmission cooler works? Where is the pump?

[@LeonAKALELE]

You should collab with the peck brothers once you're done with your fj

[@nabeshah5371]

❤❤❤❤

[@davefury66]

😎👍🏻🔥💯🤘🏻🍻

[@jesusantoniocarriongarcia5632]

Saludos desde Juárez México

[@vfeuer9236]

hey austin would be nice if you use that youtube tool to auto translate your voice to other languages, i'd like to show your videos to my father but he doesn't speak english

[@wowthtsgood]

I don't think that exists, man, or at least it's very unreliable. Most people who make efforts for other languages pay someone to translate

[@vfeuer9236]

@@wowthtsgood it exists since a few months ago, and works great, it's made by AI, and some yt videos already enabled that

[@kdbl007]

Turn your Closed Caption on….then switch the auto translate from English to whatever language he speaks.

[@vfeuer9236]

@@kdbl007 i guess subtitles are too much effort for a old man

[@abpsd73]

Those heater hose brackets are tits.

[@rashlaninburhan]

Oak Burgers