We're DRILLING out of the MOUNTAIN TOP! - SPACE ENGINEERS Survival - Ep 16

[@SkyeStorme]

FULL SERIES PLAYLIST ► bit.ly/3ZoLirk

[@Uzzgub]

A Interaction for the Interaction God, a Comment for the Comment Throne, for the Almighty Algorithm

[@Kaboom-0623]

I can honestly say ... I told ya so ... the reason the drills do NOT break apart is because the bore hole actually keeps them steadier ... if it was sideways then you would need wheels to carry the weight ... which brings a whole new set of bounce as well ... a quick check to see where steve is just right click drill out from between steve and his dig buddy Harry towards tom and dick ... and make motor cycle sounds when doing it .... gotta have steve jumping that fence after all ...

[@StyxRiverGynoid]

Tip for you. Share Inertia Tensors - turn this on for everything except the piston/hinge/rotor attached to the static base block(s). Also, consider putting a pillar in beside the pistons on digs like this, and have wheels come from the piston stack to the column to stabilize the stack as it moves.

[@MrSnertje]

Thank god. I was just about to post on the last video: ‘Daddy Skye I need my bedtime story!’ But right as I’m settling in, there he is! What a guy!

[@forrestsisson2082]

The scale of some of the projects you do in these different games is amazing. Well done.

[@confused47]

Can't wait to see when the lights are in and the full scale of Tom & Dick are revealed.

[@D3doar]

I love how much you are enjoying this

[@scottpierce3351]

Well done, my man! I had no doubts. Your genius has no bounds.

[@davidb4093]

I actually quite liked the stage where only relatively small openings were made at the top of the mountain sort of like a secret entrance/control center with a great view of the surrounding lands, but I’m sure Skye will end up turning it into something even more impressive with the big holes he has made.

[@mandrakejake]

Skye, press Shift-K to enter remote access - as long as your grid has an antenna in range of your suit then you can change things like rotor attachments from the menu, its easier with a translucent UI (set in the options)

[@papuntripathy]

Wohhhhuuuu the shaft is out from the mountain creating a Hole yehh worth the waiting man.

[@robthehobbit]

Migraine recovery is complete ( I hope ) Excited to see how this turns out

[@Tifvus]

I love this series so far, has me wanting to jump back in. As a side, I'd use the wall space of the shaft for putting in a ton of industrial storage.

[@Paige_Eh]

Weebles and Clangers in the same episode. That takes me back a few too many years!

[@Da6moose6]

Skye I am loving this series. I’m ravenous for more. I hope you’re enjoying the game and getting some rest too.

[@thndrpnts]

It'll work, all the way through.

[@ingoloibenbock]

Love the series - I use warheads for tunneling - place a warhead on the ice - measure with block diameter of destruction and hey presstoe!!

[@mrmcbaldspot]

Love the tunnel names! Fantastic.

[@imdehhaydinii]

This pacing is great! It's nice to see how you complete these projects without it all being a time lapse

[@antol2765]

oh just an idea i just got when then "chimney" is done you could also make one big ship elevator when you land on the pad in the top and it can take you all the why down :P

[@JoannaHammond]

That is a lot of fun to build. Just have to remember to recess the piston holes into the floor (a long way.)

[@LPE03]

I am HOOKED on this series! Keep it up!

[@AHawksDive]

A comm tower on top of that entrance would be awesome, nice big spire with a couple dishes. loving the engineering you're doing and i'd wish i could build to that scale.

[@kwhyley5150]

Heck yeah skye. Edit : Beehive also don't need to descend just drop it on the roof n goo

[@firiedemon]

absolutely fantastic video, looking forward to the welding rig and all future idea's, these daily videos bring me such utter joy!

[@the-avid-engineer]

I think it’s going to break, and it’s going to be extremely hilarious for chat and mildly infuriating for Skye. Maybe it breaks right before it gets through the top

[@JhonProstoy]

The KZbin retrospective came out and I was notified that I was in the top 0.8% of people who watch their videos the most, I'm proud of myself, what a huge achievement. I hope you never stop making videos Skye, I love them❤

[@BryanGonzalezYT]

Also the drils have a reach (radius) of a block and a half, you can do the same excavation with half the drills, especially since theyre moving slowly.

[@rupert1126]

If you could rig up a cable car like contraption from the big entrance to the top of the mountain, that would be pretty interesting. Just an idea though.

[@isotobex5703]

loving the series - subbed gj mate

[@SkyeStorme]

Welcome to the channel :)

[@kylesmile7349]

50/50 I hope it makes it to the top should be amazing

[@JoannaHammond]

If you want some real fun. Place a side cut at the top of the tunnels and build automatic sliding doors on pistons. That is real fun.

[@donebydaan1]

Carry on Skye! yes, carry on! Amazing work, and thank you for another video!

[@user-bz6yv7bl9v]

Bro finally I have been checking and waiting am in love with this

[@wofulmickymomo]

Thank you 😊

[@colescott79]

I’m predicting that it’ll work fine. Not because it should, but because you seem to have remarkable luck with clang. If I did it it would have exploded no later than when you re attached the rotor

[@colescott79]

Wow, I was right! That should not have worked out so cleanly

[@SkyeStorme]

I agree :)

[@Surfacesine8]

Skye sometimes messing with the pistons maximum force can remove any wobbling issues

[@bigguy698]

I've been thinking about what block could look good covering the pipes in the main corridor floor and maybe glass blocks could help break it up enough to look good. You'll still see them but maybe that could look cool enough.

[@PlayersAndGamers1337]

My first thought, landing pads on pistons like a drawer, pick the floor with the ship you want to use, send it our from Harry and/or Steve so its easy to leave and dock. I enjoy overcomplimenting stuff

[@sgttye]

Keep up the good work! Love the videos. Missed you on your break a while back and time to play catch up on all your videos. Cheers brother.

[@omni2066]

this base looks amazing, currently in my own modded survival moon trying to go underground

[@Agelis]

You don't really need to build a cradle, an unwelded landing gear will do, long as it is as close as possible, you're fine.

[@HeruKane]

Also ooh on the breaking through. Awesome. Soooo I assume you are going to create some sort of cap/dome on the top with doors and stuff. hehe. Really cool stuff. Love this series. And I hope you continue to have as much fun as it seems you are having! Sooo I am not sure if I should suggest this or not, cause it might give you more work. BUT I could see having the Central Core descend downward to the level of the ground surface of the mountain, that way ground vehicles on the ice can be launched. hehe

[@HeruKane]

Sooo this is great. Also I am not done with the episode but I can't help but think that the tunnel will benefit with you building a personal and maybe vehicle elevator in one of the tunnels, or one of the walls. hehe Great stuff!

[@MarkElkin-gc6nk]

Our favourite KZbinr!

[@Dripfed]

All looks very Total Recall. Half expected to see an armless Richter plummeting from the top of the drill rigs.

[@fusseltyger]

Already was worried 😂

[@SkyeStorme]

Grats on first ;)

[@pieair]

Daily positive comment I love that you are getting more love Skye. Space Engineers was a good move. For new and old watchers of your vids. The holy church of the spud is proud of you. At and Lantis can wait, even if you dont return to them. Also remember to pet Picture 😊

[@paulie801]

The boring is not boring ( see what i did there) :).It truly makes a difference to watch you create content that you are enthusiastic about. Nice work Skye..

[@fredpryde8555]

awesome we have breakthrough that is amazing all that drilling no explosions and the perfect tunnel you are no longer a newbie you are a engineer lol

[@BryanGonzalezYT]

Control panels as far as the eye can see, instead of pressing k, he runs to the console with buttons. Never mind each piston has a control panel. And also for attachment purposes, if youre concerned about the speed, just work with the final piston.

[@FooRain]

I'm now expecting thunderbirds for the ships :D

[@caseyobrien7014]

Gotta go bigger Skye! Awesome series btw 🤘

[@SkyeStorme]

Thank you! :)

[@PapWhiskyMooMoo]

Skye when you eventually do get to building a solar array, make sure you look into how you make it point towards the sun when its visible. The angle the sun hits the panels has a huge effect of efficiency. And it also looks cool to see huge solar panel contraptions move around. You can do the same with the antenna dish btw

[@GrahamBale]

With the holes at the top of the core you can now fit bigger ships in

[@mooteg9770]

Skye use the piston when clearing the middle one / pointy part. Add vertical drill but not spining. Instead of using the ship. Then next is like you said project and weld using it again

[@tonylunaticcain6951]

have one side for orbital launches and the other for planetary launches and landings

[@CraigLYoung]

Thanks for sharing 👍

[@SkyeStorme]

Thanks for watching :)

[@ash-vj1ks]

You should turn Tom into a crafting and launch tube for orbital ship

[@danwillis1273]

half way then brake, but i think you will build a cone around the pistons as support before it breakes

[@TheAlethian]

from my experience the wobble doesn't happen as much when the rotor is at the base and inertia tensored, you can attach piston heads too ( i think, i play with a lot of mods, so worth taking this comment with a grain of salt)

[@ericwemmer402]

Four danger noodles at the same time, hold on a sec while I get popcorn.

[@SkyeStorme]

lol ;)

[@TNH91]

You' should probably also have a welding ship that you can fill up with materials and weld so you don't have to go back and forth as much to weld things up

[@TheAlethian]

Now imagine this build in SE 2 with the crazy graphics they got goiing on with real water

[@roguemajin46290]

and hearing se2 is coming soon and we will have water and so much more omg i cant wait aaghhhhhhhh 😭🤣

[@FanfictionEnjoyer]

Can I suggest something to anti-wobble? A platform that holds the rotors, and two to three sets of pistons per platform with rotors. Additionally, place 'bracing bars' between pistons at the 1/4th, 2/4th, and 3/4th setup points. Basically, all the non-rotating parts are held stiffly to create a nice straight shaft while the rotating tip is free to work its magic.

[@drunkguy_6639]

Nice work keep it up. :)

[@SandMan29331]

I have no problem with a video every other day of Space Engineers if it means you're happy with the video you release. I'm sure others share the same sentiment.

[@TNH91]

I thought that it didn't matter if the drills were full, they would still remove the material they're going through. So it _should_ have been okay to not even have a way to get rid of the stone unless you need the space for putting other resources in.

[@HAKIMEOVER9000]

I think it's gonna reach the top & some of the drills will break.

[@HoldenConley-m4t]

also skye how long do you think you want to make this series because i would love to see you build massive ships space stations and bases on all the planets

[@khartian]

Awesome work, brother! I like the naming scheme, but now if you don't put a refrigerator room in Steve McQueen's tunnel, I'll unsubscribe. You need someplace to throw a baseball, y'know.

[@SkyeStorme]

LOL ;)

[@FreeSamich]

The tallest mountain deserves the lowest dungeon 😉

[@m14srv]

It's gunna be fine there'd 17 pistons on my deep drill rover and it works fine if I remember rightly you shouldn't share inertia on the 1st piston either

[@jbweld138]

It will work.

[@jason9152]

Locking in at, it works, and didn't break. I'll edit after the episode is over.

[@Skwisgar2322]

I like your idea of piston welders, but you would probably be better off restarting from the bottom, or at least having the pistons fully retracted.

[@wollwo]

On Friday, I went to theater on "Tom, Dick and Harry" play :D there was no Steve there :D

[@OrfredyMelobeltran]

It will made it to the top safety

[@ccanozz]

Hurraaaay

[@Uzzgub]

A Interaction for the Interaction God, a Comment for the Comment Throne, for the Almighty Algorithm

[@carpemkarzi]

Is it possible to use the lights to make numbers to show how high you are? 10m ,20m etc.

[@ericwemmer402]

I would be afraid of a collision between the drill sections with the wobble allowing them to cross paths.

[@indianasqueakz]

One thing I noticed in the last few episodes is that you didn't extend the one side of the drills to compensate for the conveyor being offset to the left by one square. You mentioned in an earlier video that the center was 2 squares wide that there wasn't a center square.

[@SkyeStorme]

I have a different plan :)

[@LikeEmmaWithaT]

"Send down 30 feet of rope!"

[@SkyeStorme]

;)

[@mj-lp5eb]

Tom's Shaft might be longer but Dicks Shaft is way smoother

[@MrDanaris]

its going to work but because of the wobble it'll take a slight funnel shape is what i think will happen

[@justint9639]

Time to flip the drills over and see how deep you can mine?

[@takumi2023]

Skye this game is call space engineer 😂. Build at least an observatory to keep track of space crafts and watch the stars. I wonder if the game has a satellite dish. If not, could you make one using the parts. It'll require some complex curves. Good luck 😆

[@kylesmile7349]

Outstanding what a gorgeous view can't wait to see the bass done off-topic are you going to play vintage story 1.20 when it comes out just wondering

[@Lazygames2]

Awsome vid keep up with the series and are you going to drill dow and if true how far down. Love vids

[@ScottNorrie]

what i think is going to happen with the pistonotron is a little bit of a heavy wibble wobble as it goes up, causing anxiety in storm due to the walls screwing with him in not being straight followed by hours in a mining ship getting it juuuuust right...now back to the video

[@XAORESS]

Personal bet : it won't break at all

[@col44446]

Not to be a bother but You've been building for sooo long I wanna see more Space in Space Engineers

[@martintanner1316]

George was the name of the fourth tunnel if I remember correctly.

[@marijn-mandarijn-harold]

Are you building nuclear silos 😂😂😂

[@paulgoodchild3482]

I cant imagine how long it would take to all that stone out the bottom of your trouser.....eons maybe

[@koryferencz7391]

Is this game mostly base building or is this all prep work for a larger game? Are there more characters that join your base to work in it or is it just a solo player game?

[@mandrakejake]

Pistons are 10m divide by speed 0.013m/s = 769 seconds (00:12:49)

[@SkyeStorme]

It's 0.0013 ... so 7,692 seconds = 2.13 hours

[@groggjoggarn]

Perhaps the piston shaft will bend and brake at the middle at som point. Perhaps at 50-75% of its extension.

[@takumi2023]

I thought 70-80% but seems like it didnt break

[@GrahamBale]

15 pistons and a rotor time to pray to clang

[@SkyeStorme]

lol ;)

[@WestBound]

ehm... actually Skye, this is episode 16. I know it was late, keep up the good work!

[@SkyeStorme]

Fixed .. thanks for the heads up :)

[@timphillips5618]

Share inertia tensor on everything and increase rotor tourqe? 🤔 it's been a while since I built a drilling danger noodle... I'll have to boot up SC and do a little testing. Regardless, here's your comment, and like for algorithm. 👍 great series thus far.