WE'VE BEEN DESTROYING MY JEEP

We have been beating on the red turbo jeep a TON in the last several videos!! Watch as we try to get it in running order for our next big event!! And in the process we end up breaking Alex's jeep too!!
peckbrothersoffroad.com/

[@bullittdog4352]

The front of the gray Jeep pooping the bed while busting cyclones in the snow is such a Peck move, I showed my wife that and she said “what’s wrong with that guy” ! LOL. She then looks at me laughing my ass off and tells me once again that I should hang out with you guys because “I’m as big an idiot as those guys are” .

[@noahbaru]

Somebody needs to get these guys hooked up with RCV’s😅

[@jacklougheed4561]

Sounds like it’s time for you boys to look into RCVs.

[@mason_stratton7]

This has quickly become one of my favorite channels on all of KZbin! Keep up the good work boys!

[@TrailTime.]

Put in some RCV’s and send it!

[@krisbarnard1684]

East coast gear supply. They got me my drivers inner axle within 24 hrs when i broke mine, i had back to back weekend trips and i called monday just after lunch and it showed up before lunch tuesday... and im in canada. Because of that ill ALWAYS recommend them

[@rnuovrcj5]

Just came here to say the same thing. East Coast Gear Supply is where it’s at for getting axle parts fast. I’m only a few hours away from them in NC and I usually have parts the next day even with normal shipping.

[@TheTbyrd85]

I absolutely love y’all’s videos great content and brothers being brothers and having fun. And the clip inserts for the funny parts absolutely make me laugh 😂 keep up the great content guys

[@bdd1469]

When using stock axles try tack welding the ujoint caps in four spots to keep them from moving in the axle and stub shaft. I had to do this with my stock TJ dana 30 after I put a locker in it, to avoid breaking stuff on almost every trip. I first tried full circle clips to hold the caps in place, but that didn't help.

[@JeepAddict]

What about the sector shaft? Looked like you guys twisted it off at 24hr hell and back. Was looking forward to seeing that carnage and how you were going to remedy that. Possibly a sector shaft support? Also really looking forward to more of Brady's LJ coverage since I'm in the middle of my LJ build

[@adambrown7741]

Summit has a storefront in Vegas. Head to sand hollow early, hit summit and back track. You’ll have all the tools you need with you anyways.

[@troublemakerjku]

I think Bendpak lifts need to hook you fellows up so you can stop working on the ground!!! Keep up the great videos!

[@jordangryg5442]

time for some RCV's

[@JW-cn6op]

RCV's need to be ordered haha

[@scovell88]

My 4 and 2 year old love watching Jeep videos and I like how you guys keep it wholesome. My kids are so intrigued by all the parts and seeing how it works. Hoping to take them wheeling some day, I have two TJs but they aren’t built like these.

[@RileyMy5090]

Great channel, guys! Maybe some balljoint deletes in the future!

[@ridintwowheels2515]

That front bumper on Brady’s LJ looks so sick!

[@Jason.O379]

I really really want a "i've had it" shirt with Caleb's face on it like the ones someone made for yall. I would totally buy one, or even just a I've had it shirt!

[@matthewmiller4475]

Your guys attitude about broken parts are awesome !!!

[@PaulKaiser42]

You guys beat those jeeps like you should!! Great video as always👍🏻

[@NittyGrittyOffroad]

East Coast Gear and Axle Supply really hooked us up when we built our LJ!!

[@Baumann4.0]

I just started watching your channel. I absolutely love it you guys are great.

[@bryansnewandused]

Never heard of you guys till matts games. Love your content. Funny as sheet.

[@johnmcwade222]

LETS ALL SAY IT TOGETHER, BUY RCV SHAFTS. The strongest axle shafts. No more points to worry about. RCV please sponsor these brothers.

[@ericwitt4153]

Do more videos... At least 3 a week come on you guys! LOL love the vids you guys are a trip! Live the jeeps!

[@Baumann4.0]

I just started watching you yea who's, absolutely love your show

[@SethDrew]

Another great video. I now look forward to the new weekly videos. Entertaining and inspires me to get out in the snow and keep working on my Comanche. Keep em coming.

[@robnobrc]

AGAIN!!!! You guys had me laughing and drinking my coffee on Sunday Morning!!! Caleb is just pure hilarious!! Good thing Brady is the guiding brother in this group! Lol Love your channel guys!!

[@delta_mike3918]

You guys need American Iron Ball joint eliminators !!!

[@MRALL4FUN]

LOVE YALLS VIDEOS!! KEEP UP THE GREAT WORK!!

[@jonjalbert1922]

Great show guys keep up the good work Question, can we have an update on Brady’s LJ and an ETA of when it’s to be finished 😊 Can’t wait for the next episode lol 😂

[@rossbuchanan]

I started watching your videos a couple of weeks ago and bought a TJ last week, 100% because of you guys haha! Looking forward to videos of the trip!

[@ryanreaves1203]

Last resort run two 1/2" welds on the caps if they ever come loose like that again. It will get you buy in a pinch.

[@AdventuresOfRogersAndHenderson]

Fun video y’all, as usual! 🤘

[@rockkrawler4lo942]

East coast gear is where I ordered mine good prices too

[@SamuelRLaird]

Get some RCVs.. I put front RCV axle shafts in my wife's daily driver 2016 Rubicon that we've taken to Moab twice.. you guys love your super swamper tires, like the rock bouncers. The bouncers run R C V... keep up the good content..

[@davestevens4263]

You guys are great! I met one of of at k.o.h. Last yr , since I only live 40 Min away. Best of luck for 2024 ! Hammers are almost here .

[@krawlerkingdom]

How you boys not have 3 sets of shafts per?! Time to get sponsored by Yukon 😂

[@anthonylee2099]

Crazy break🤙😎

[@gregrundle9536]

best channel on youtube

[@gregrundle9536]

and the most destructive.

[@loriallen8685]

Me & Abe took a piece of 3/4” 6x10 to the junkyard not long ago & threw it away🤦🏼‍♂️😩 it was on his trailer & we needed the trailer. We had to go to the junkyard to have a crane lift it off🤦🏼‍♂️🤦🏼‍♂️ dang it!

[@dogcreek8547]

Oh My Gosh! Where have you guys been all my life!

[@elisherman7791]

Awesome to see you guys using ict billet. They’re local to me here in Kansas, I use a lot of their LS swap stuff

[@craigmcdivitt3084]

Can't wait to see the sand hollow video!

[@Hillbilly-zn6lx]

You guys crack this old man up lol

[@wirebrush]

Keep an eye on KSL. I nearly road tripped down there a few months ago for a big 5/8" AR plate to top a fab table with.

[@jasonbarrett7756]

Something that's not ment to breaks well yous manage to do the undoable and break the unbreakable wow well done guys keep on doing it that's one of the reason why we love watching lol

[@mikemiller9119]

Yeah yeah! They're on! 😂😂

[@karenjudah9107]

You guys are having to much fun Jeff Judah

[@StormbornJKU]

You guys need to just shell out the cash for some chromoly shafts already!

[@stevearonie7825]

You should put a filter sock on so those filters don’t plug super fast

[@Bringit29]

Great video!

[@zekeisme1]

channels gonna blow up soon.

[@dogcreek8547]

Gold fish on the floor, come on man I can't stop snort laughing.

[@RileyMy5090]

You guys have me wanting to get some 43SX tires!

[@Out_Lier]

I’ve got a set of stock axle shafts from an 06’ if ya need em here in Hurricane.

[@ElbowEyE]

Reality at it's finest.

[@ChrisBallard-iu7qv]

Finally been waiting a week for this 😂🤙🏻

[@psualligater]

Hopefully those air filters are just temporary. I’ve got serious doubts that they’ll flow enough to keep up with that engine.

[@waldnernick1]

Dirtlystyle did a video on harbor freights weld tables and i'd say that some of those with some customization would work out good for you guys.

[@joshsaramadi11]

Man you fellas need to come out to king of the hammers! This channel is just too good😂👍👍👍👍

[@HardcountsAdventures]

I wish you the best of luck on those axle shafts gentlemen, Its great to see how you guys helping each other out. How come you guys don't run RCV axles? it might be worth looking into.

[@PatientXero607]

Indeed. It's pretty much common knowledge that when you start putting 39"'s or bigger on a Dana 44, you're asking for trouble.

[@ivanfromtheeast4709]

@@PatientXero607they’re on tons but 37s are at the top end of what a 44 can handle on a full body vehicle

[@PatientXero607]

@@ivanfromtheeast4709 They should have done what most Wrangler / XJ owners do when running that size tire - Upgrade to Dana 60 or Ford 9".

[@ivanfromtheeast4709]

@@PatientXero607 they have Dana 60s

[@OutCastCrawling]

I do believe you can get 05+ superduty axle shafts from oriellys funny enough. Just gotta get them for a 450 or 550.

[@Thewildcardnick]

Hahaha great video. My calculations say that you guys have a 75% failure rate per month on shafts 😂😂

[@freeridin12345]

boys sounds like need some rcv lol and if does break it doesnt take out stuff like the u joints do

[@PhatboyHD88]

Man i had same problems with starters in my jeep. Put a brand new crate engine in my jeep , new starter “Car Quest “ from advanced auto , 3 of the, left me stuck in 4 months, one never left the shop😂. Finally i got a “Wilson” starter been awesome for a cpl months now .. as bad as the drivers side was on Alex’s jeep , did you guys pull apart the passenger side also to check and see if anything is bent or wore ? 24 hour hell and back probably did damage on both sides , just sayin 🤷🏻‍♂️

[@andrewmarkus454]

I have a set of super duty shafts you guys are welcome to!

[@zephgage3694]

BUY YOUR unit bearings on rock auto 85$ it’s crazy and they work great

[@4xBro69]

Haha I did the same on my joints too

[@davidmccarl4836]

What brand are the beadlocks leaned against bradys jeep?

[@aaronleonard7111]

I always thought 31s were average sized tires, until now. 😢

[@BodiTriggerfinger]

Fistfight sounds interesting…so smack da pony and find out who is the real PECKER in da house…. 😂😂😂😂

[@redlyne624]

Branik Motorsports makes some nice stuff. Check them out. Also I cant wait to see more of Brady's Jeep. Love your videos

[@marklowe330]

You guys need to get up with Jake Burkey at busted knuckle. They have factory pull out axles for a great price.

[@patrickwright3595]

You guys need to buy a hoist or two!

[@rocklanderoffroad]

Making Sundays Fundays!!!

[@davedonedis]

Must be Yukon shafts

[@dreamlinerkoa6438]

Looks like Hell and Back got you a bit more than you thought 😢😢🎉🎉

[@DCarter355]

What lights are on the bumper, are those the Flex Era 1?

[@PeckBrothers]

yessir! KC Flex Era 1’s.

[@davidgroskopf7898]

Peck brothers wrecking crew 😂😂😂😂😂

[@danf1862]

Hmmm $2800 for some RCVs or keep replacing shafts. Easy choice

[@grim4uZJ]

Wait, you guys aren't running moly shafts? LOL

[@matthewmiller4475]

Get some kryptonite front bearings try them out? Lifetime warranty

[@douglasmckee754]

You boy's got the worst luck😂😂 I pound the hell out of my tj and Rooster just handles it. It must just be a Big tire issue😂😂😂

[@Thexkidd]

All those problems from the 24 hour thing.

[@craiglabell]

Glad to know it's not just my stuff that breaks at the wrong time. LOL New to your channel. Going to go back and watch previous videos now. Keep up the great work on the channel.

[@chrislarsen1033]

RCV’s?

[@ryanreaves1203]

Time for arb locker rcvs and drive slugs

[@Joseph-vj1lo]

Which KC Lights are on Cayleb's and Alex's Jeeps? Want to try and source a set of KC's for my TJ here down under! Cheers guys

[@JeepLifeChris]

Cayleb is running what looks like Pro 6’s on the a pillars and flex era 1’s on the bunper. Alex has flex era 4’s on the a pillars and flex era 1’s on the bumper.

[@Joseph-vj1lo]

@JeepLifeChris what would be the better choice out of the pro6 or flex era 4's? Not many running KC lights in Australia so hard to benchmark them in person 😅 mounted to pillar that is

[@JeepLifeChris]

@Joseph-vj1lo the Flex ERA 4 is typically a combo pattern. The top two lights in the 4 are spot and the bottom two are defused to give a fog pattern I believe. ERA 4 also has an amber backlight. The ERA 4 lens can be swapped. Alex is runnning the combo lens. The pro6 is spot beam. For an all purpose light, the ERA 4 might be a better choice. If you are wanting a spot light specific application, Pro 6 might be the better choice. I’m running KC Apollo 6 fogs on my bumper and KC Slimlites spot beam on the a pillars to get great light a long way down range.

[@ddesilva61]

Love to know what intercooler that is - anyone?

[@charlesq6148]

Waterproof filter Sox. Chromo shafts..

[@jeremywolfe5483]

How many standard stubs does it take to cost the same amount as a chromoly shaft? 😂😂

[@cletusandfriends8763]

6:21 spend the money go rcv

[@eRevere85]

Chinesium shafts

[@xjmojo]

You guys don't need cromo You need rcv lol

[@jimhoran5445]

👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸

[@user-et6ku1ws6f]

love taking tires of my dads jeep

[@nate.bailey]

Get rcv’s

[@Doughheaddos]

Good thing yalls jeeps keep breaking or youd be outta content

[@ChristhompsonDG]

35spline superduty outers aren’t the strongest things. You either have to go 40spline or go to the direct drive stubs. You can’t have 43s and not go full potatoe. I’ve had no issues with my 40spline stuff And definitely gonna keep blowing stock 1550 stuff

[@forestgreen1623]

wow guys the music sucks