We've Gone Deeper Than Ever Before... On The Revo 3.3 Y'all

[@CrazyDad226]

Fly wheel last for a long time. Now i have seen one out of the 2 studs break before. Glad you got it figured out. 💥👍👊🏻

[@MR.B.1620]

Good thing I have a spare... hahaha

[@fcbaker65]

Yes they do sell a carb kit for Traxxas ,that is what good about that brand ,they sell all parts! I dont or never had a Traxxas ,but in my opinion those type of clutches are weak for the size of a Revo an may burn out quite frequently ,that style should only stay with the smaller 1/10 scale RC's! Having a manual will help & should provide Parts #'s an some people will actually install beefier or hop-up parts in that area as there might be a 3 clutch shoe set up available for it! Good luck on repairs!..😎👍

[@MR.B.1620]

We've got life!!

[@rcsendandblast1579]

Your carb is no doubt fine if it runs good leave it alone. 👊😎

[@ironhead320]

Yep not.only that those rebuild kits are a pain in the you know what I just got a replacement carb better mine had other issues the high needle sleeve was stripped

[@rcsendandblast1579]

@@ironhead320 Ohhhhhh. Yeah man. I just didn’t unthinkable for the last time. Over 100 bucks for the OS 11 k carb. It better be the last carb I buy because I already bought a OS 11 k that was junk

[@ironhead320]

@@rcsendandblast1579 I was going to get.one.but not.sure.if.i want to pay that much

[@CrazyDad226]

Yes you can buy a Trx carburater rebuild kit. The carb for the 2.5 and 3.3 are the same. Your spring is good. I have shoes if you need them. .let me no. I would replace the 2 clutch bell bearings for sure. 😊

[@MR.B.1620]

I've got a few shoes thank you Man! I am however curious about that Pull start mentioned a while back for a RC10GT. I am almost ready to start that project Anxious to have a 2wd after seeing you with your new Jato

[@MaJestic1988]

You can also interchange carbs from other machines As long as it's a slide carb like yours it will work As for clutch bells more teeth high long End speed less teeth higher speed off the hop Just gotta make sure the bell and the slipper clutch mesh

[@MR.B.1620]

Yeah the pitch is different I see for the one Revo. Not sure about the other yet but these bells will go on the Tmaxx as the pitch is the same! Otherwise I will see about getting a different Spur I suppose for the Revo's.

[@mattfavor2940]

Do yourself a favor and buy the 3 shoe aluminum clutch from m2c and get rid of the large heavy tires. Get yourself some premounted badlands from proline and your clutch will thank you. The big heavy tires will wear a bunch of stuff out quickly. This is all personal expierence as well.

[@MR.B.1620]

Thank you! I do have a 2 shoe aluminum I can use for now, great advice. I do have some other tires to use ... stubborn there lol. Those poor nubs I removed hahahaha, did you see that?

[@MR.B.1620]

Ooohhh, I like those tires too for sure, thanks again for the tips!

[@desmondtaylor5778]

You need a carburetor boot separately bigger the clutch Bell more torque

[@MR.B.1620]

I do! Thank you, I'm going to get a couple of these!

[@rcsendandblast1579]

A engine a 2.5 and new carb is 80 bucks. At Jenny’s A new 33 with carb is 110 bucks

[@MR.B.1620]

I've looked a few times and they're always out of stock LOL. Great price though and hopefully I will get one even if I use it for something else like maybe one of my HoBoa chassis

[@rcsendandblast1579]

@@MR.B.1620 Add your info into both email reminders and phone number reminders for products when they come in stock. Stock refills on Thursdays bro. Keep that one to yourself though so the parts don’t fly outta your reach into someone else’s hands right away when they come in stock. Every Thursday look then 👊😎 Just get those reminders done and you’ll get what your looking for 😁✌️👍👍

[@MaJestic1988]

As for clutch shoes aluminum they wear a lot less and last much longer

[@MR.B.1620]

Apparently it is good to have spares, glad I have an aluminum set already too. Thank you!

[@desmondtaylor5778]

I need a For forward and reverse gear black ones for a Revo 3.3

[@MR.B.1620]

Tra5395. I've got one on its way to me as well.

[@rcsendandblast1579]

Bigger pinion will make it go faster with less torque