WE273SPREBOOK Italian Crusher Destemmer

[@barrillesmason919]

Take the motor housing off and study the alignment of the pulleys. Also check that the screen is fully inserted and tightened. I have resolved the paddle scrapping issues many times by adjusting the pulleys and the position of the bearing (two adjustment bolts at the pulley end) several times. What I haven't resolved is that there is a cut out in the shat right about where the bearing is. If the cutout aligns with the breaking, the shaft 'floats' in the bearing hole. I can move the shaft in and ou t a little to get it back into the bearing in a tight fit but it always moves back out. I don't know if this is by design. I tried a hose clamp on the other shaft end to no avail, the force pulling in the shaft (from the pulleys?) is too much.

[@WayneHarris]

I replaced it with an upgraded model. Thanks.

[@WayneHarris]

@scott999sim This was simply a broken model. Morewine was absolutely fantastic in their help.

[@armenaleksander8174]

[e-mail] Здраствуйте МОЙ ПОЧТА ! хочу купить насчет давилки !

[@scott999sim]

Greets, I have been looking into destemmer/crushers and was considering this one. Were these issues resolved? From MoreWine? Also looking into the ENO15S (St Pats), and the WE286...What I am thinking is that expecting the rollers at their widest position to still engage without self-destructing, may not be possible for this design.

[@WayneHarris]

I would agree that this is not a great crusher. This model has many faults and is very low-end. And this particular model was in fact broken. But it was designed as a Grape crusher and grape destemmer in one unit. I have crushed many hundreds of pounds of grapes with this model. So, I am not sure what you mean.

[@salstangarone8419]

Hi Wayne, How happy are you with that crusher/destemmer. I'm looking for recommendations for one. Thanks for your help

[@WayneHarris]

I ended up not happy at all with this. Mostly because this was broken when I got it. Had it not been broken, i believe it *might* have done the job. Perhaps. Its under powered and leaves a lot "stems in the must. So it barely worked. But MorewinePro made it right, and paid for the shipping involved in returning this. Then I spent a little more, and got the MoreWinePro WE286. This is the 220v version that has 1 hp. It is perfect. No power issues whatsoever, and it does a great job at separating the grapes from the stems. kzbin.info/www/bejne/iHq4haeJeZVofq9oY

[@salstangarone8419]

Wayne Harris Ok, thanks for the feedback Wayne

[@ouppz]

You should vision CME's destemmer...they're manufacturer since '46!!

[@mishtall1]

im sorry that is not a wine grape crusher you should see no light and the crusher part looks nothing like what you have.

[@armenaleksander8174]

здраствуйте скажите а вы продаете ? можно купить такую машину давилку винограда с гребнеотделителем я занимаюсь на тамани изготовлением вина !

[@WayneHarris]

Это не для продажи.

[@armenaleksander8174]

@@WayneHarris Wayne send me your mail, mail, I will send you my video. I have an old crusher, 19th century, but I want one with a comb separator you make yourself? or modify it, I could fix it and buy from us they are sold but very expensive!

[@ΕμμανουήλΚοντογιάννης]

good

[@СергейМанаенков-с2л]

машина в целом хорошая но вальцы дрянь