Weather Struck Pointing !!

[@jakeschmell]

Great vid. Good guide on the verticals. Thank you. 👍

[@davideyres1628]

Retired bricklayer have you heard of a tool called a frenchman for cutting the surplus mortar from the bed joint

[@northlondonmasons107]

Your a good weather pointer But you have made a mistake , the mix you used it too hard for those bricks 🧱 a 4-1 sand and cement is like concrete for sand and cement pointing the mix is 6/1/1 lime sand cement.

[@Jaaammmbbbooo]

6 lime?? You mean 6 sand 1 lime 1 cement

[@MrMisterdrum]

obviously thats what he meant@@Jaaammmbbbooo

[@steveemmett9540]

I’m in the trade for55years, that work is too rough! Try using a 10mm finger trowel, you get no smudging.much faster and use much less muck!!

[@Will-lv5cz]

I agree rough

[@johnbowkett80]

It will weather and look great ..... Too many armchair "master bricklayers" on here . 👍💪🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@grant7934]

That's a new, better technique than mine. Nice work, Ivan.

[@topcatcoolio8807]

NICE WORK MATE

[@denisoleary5302]

Back to school for you young man! 75 year old bricklayer.

[@Southpoint2019]

👍🏻

[@RobThompson-to9uv]

Will be weeks cleaning the cement of the bricks with acid

[@shoehorn71]

How much you charge per sqr mtr?

[@skatergirl7663]

Gr8 video Ivan! Ignore the h8rs. Can I ask how much PVA you add to your mix and what is its purpose? Thankyou

[@tombrehony6277]

25 litres of acid will clean the brick paving...

[@mrdeafa25]

TBF he has it all well sheeted but I agree he is wasting a lot of gear.

[@ice-cp2vz]

OMG

[@martingaynor5017]

how to create damp 8nside your house. it should be lime mortar. hydraulic lime no cement

[@GeoffRapley]

this only applies if the original mortar is lime mortar. if original mortar is cement based, it is perfectly ok to use a 6 sand, 1 cement, 1 lime mix

[@barrymatthews1705]

Nice job. For the horizontal lines try a length of roofing lathe. Put a couple of screws in to hold it about 6mm off the wall. Works a treat.

[@liammcnulty7112]

Spirit level too long, piece 2/1 straight batten which is handy to handle, also faster, trowel needs to be next size up also

[@TheNorthernmunky]

Lovely

[@BEEZAGEEZA]

When u think u know .BUT DONT!

[@anthonybeard7571]

10 yard a day easy

[@ashleychambers7602]

Mate lose that beard, a handsome man lays behind that beard

[@user-nh1lh9fd3q]

Not bàd use a butter knife

[@seanmcgrath9167]

whay not just use two tubs to dry mix your gear then mix the lot in one tub. too much fkn about here.....im out!

[@wontbelongnow5567]

Your pointing is not done to good standards. When you learn to point correctly then you can teach people how to point. So learn yourself before preaching.

[@alanoconnor1610]

I am a master bricklayer mason I’m 38 years doing this go home and back to your farm.

[@mrdeafa25]

Thats a bit harsh mate. No need for that.

[@alanoconnor1610]

@@mrdeafa25 would you let him do work on your house there is no such thing as a pointer bricklayer masons only nothing else that’s who you get to repoint.

[@mrdeafa25]

Not disputing that pal but 'go home back to your farm'? WTF is that about? Its not the 1970's anymore. I'm pretty sure that with a name like O"Connor your predecessors probably came from Ireland at some time, do people say the same to you?@@alanoconnor1610

[@topcatcoolio8807]

Bit strong. Nice looking job

[@oxymoron5167]

More like a master baiter

[@barryburroughs2231]

Sorry pal but it’s crap to many people think they no what there doing

[@tonynewman8586]

The Neighbor was right to stop you working before 7:30am / that’s the law 👍

[@juicysmollett255]

What’s with the beard!