Making a Leather Axe Sheath

[@andrewgray9663]

How can you click 'dislike' on one of Chuck's videos? It's like slapping a puppy! Never seen a more positive human being.

[@eiward]

Andrew Gray Right?!? Clearly whoever did that has personal issues.

[@thehopperhopes6365]

It's to stop recommendations , if you dislike a video KZbin stops suggesting those videos.

[@robertsimmons6945]

Down to earth tutorial with no loud music by a professional person who talks with skill and gives options with methods for new starter great.

[@MBwelding]

I swear I watch these just for the energy this guy has he’s just awesome lol

[@QuasiTronOfficial]

28:54 Ok Chuck! That was the smoothest Ax flip.

[@revon0521]

I'm a beginner and therefore have viewed a whole lot of how-to videos on making leather axe sheaths, almost all of them truly helpful. However, none of them compare to the thoroughness and simplicity of this one. I wish I had started here, but better late than never. Chuck never fails to educate, but more than that, he inspires. Bravo, Chuck and Weaver!

[@WeaverLeatherSupply]

Thank you so much!

[@SlothHarvester]

Chuck is the man! Oddly he never seems to blink

[@omarroa811]

(25:28) I'm affraid that's a bouscout knot 👍... Wonderful job, Master 👏

[@Thewatchinglad]

This guy is such a good teacher make me wanna build one those, and I don’t even own a axe. Outstanding job lad.

[@darylnd]

I just sold a commercial axe because I decided I wanted to build my own. It's meant as a general-purpose axe for the truck and for woods bumming. I found a vintage, 2# head in good condition (too many have mangled eyes from people using the poll as a hammer) on eBay. I ordered a 28" boy's axe handle in red elm from Chris Killinger. So yes, I now have to make a sheath. Check out Killinger's channel. The Essential Craftsman has a ton of info from what he knows (he's a professional carpenter) to what he's learning (blacksmithing, plumbing). And if Buckin' Billy Ray Smith doesn't get you fired up, have someone check your pulse: you may be dead.

[@NathanThompsonBlueEyes]

@@darylnd Many hatchets are made to be multifunctional with the poll/butt usable as a hammer...

[@manueljones6709]

This man is so professional and great at explaining every detail. Thanks.

[@WeaverLeatherSupply]

Thank you so much!

[@jimamccracken5783]

Chuck, Is so enthusiastic with what ever he does. He should have been a school teacher. Thanks Chuck for being the way you are. I have 19 Hatchets to make sheaths for.

[@patrickellis3205]

You looked like that last take had to be done a few times, spinning that axe on your finger really made you smile 😀 loved the look on,your face. Great project and great instruction thank you 😊

[@roberthenson6153]

It’s actually not hard. Though I’d recommend practicing with a hammer first. Step by step 1: grip the strike face with your baby finger, handle down. 2: swing forward, and up with your elbow. 3: smoothly release the grip of your pinky, as you stop the swing. 4: the hammer/axe should rotate across the outside of your fingers and back into your palm.

[@dwainm7390]

What a professional. The man is in a freshly pressed, starched long sleeve shirt, and spotless. I’ll have glue and dye every where, my hands, clothes, and work surface.

[@raymondrobbins9495]

I kinda did this design it was my very first project with leather crafting. It was pretty tough hand stitching the end with the welp. Took me all afternoon to make a sheath for my hatchet :) I learned alot watching his classes. :)

[@greyviking2412]

I hope Weaver Leather understands how much business you bring in for them based on these amazing videos.... and hook you up with Bonus’s!!!

[@thirdworldadv1312]

You're an excellent teacher Chuck. Thanks

[@tommysjr4045]

I've watched hundreds of axe sheath videos - this one is the best by a long way! Well done!

[@richardkatzman2066]

Chuck perfect as always!!

[@archiem6323]

Someone hiring me to make a leather sheath for an Axe. I will follow this video. Thanks for showing how is done.

[@WeaverLeatherSupply]

Hope it turns out great!

[@archiem6323]

@@WeaverLeatherSupply I'm working on it right now. Thank you so much for your replied. I watched your videos all the time.😃

[@busdrivermike13]

I love these videos, well done camera angles, clear instructions , probably best I’ve seen on KZbin

[@WeaverLeatherSupply]

Thank you so much!

[@ArvilVonPoney]

Great axe spin Chuck, very professional ! Thanks for this video

[@swish0078]

Ok Weaver Supply Company, I watched Mr. Chuck here and I must say he taught me a lot and has a great personality for instruction. I enjoyed it so much I subscribed and bought some leather and supplies. Following Mr. Chuck’s instructions I actually made my first sheath for my axe. Not to brag, but I impressed myself. 😁 Thanks again for the great video and new hobby. Sincerely, New Customer Eric

[@WeaverLeatherSupply]

That's great to hear, Eric - so glad the sheath turned out well! Thank you so much!

[@goblinsandflagons]

Love that little spin of the axe at the end! Fantastic piece as always.

[@WeaverLeatherSupply]

Thank you very much!

[@SaltBayGull]

Well thanks to you I am now noticing details in leather sheaths, cases, and other things that I own where they just didn’t take care of the details, and now I want to fix it. I’m also looking at chafe gear I’ve made for my boat and thinking “I could really improve this, and now I know exactly what to do”. Your videos are the perfect thing for a life of learning. Thanks!

[@WeaverLeatherSupply]

Thanks so much, Sean!

[@Scribnastyman]

Sweet axe flip at the end Chuck. An awesome project as always!

[@jasonherrington2002]

adding the link to a page that has all of the parts/tools etc on it is a great idea!

[@SalviMithrin]

This is the way a master works... just amazes me

[@abbeb734]

I wish I have this amount of energy when I get to this guy's age! What a champ! Had a little hard time follow every step, but as someone mentioned, it's quarantene; I can watch this video all day!

[@richwojehowski1123]

Chuck? He's only 25!

[@mikeboone4425]

Will chuck just finished a hatchet sheath about 2 months it was a real pain in the BUTT very odd head shape . I had to make 3 believe it or not to get the fit and look where I wanted it . The only good thing about my project I was able to us scrap. Just finished up my first belt and with the help of your video had zero problems. I did not us snaps or screws just saddle stitching also did not have the great leather so I doubled it. This belt is strictly an out door belt for hunting camping and fishing trips . I made it 10 inches longer than need be to go around a heavy coat . now I need to make some pouches just finished the wooden mold for wet molding but not really sure I want to go that way , I am thinking of trying some box stitching always wanted to try that I did make a holder for box stitching just not have made up my yet . Happy trails and thanks again for all the great instructive vedio's.

[@joerunyan9344]

Nice Axe Sheath Chuck! 😊

[@tcswag801]

Thank you for the video , it's trying to come up with some ideas for my Cold steel " rifleman's hawk " leather sheath . Bought the material and a starter leather craft kit First time just needed some ideas and inspiration thank you .

[@jenniferjones6759]

Chuck, I love the way you teach. The enthusiasm makes you want to watch over and over. You are just great at what you do and I sincerely thank you for the knowledge!

[@WeaverLeatherSupply]

Thank you so much, Jennifer!

[@HouseJakey]

Thanks God for quarantene right now - I can spend 8 hours of watching this on repeat instead doing it only 2-3 times at work secretly.

[@1-0totheOrient]

A spell binding view and a classic case of a master making something look easy.

[@pauleysink9659]

Just watching your enthusiastic presentation(s) is becoming a hobby in its own right. Love it

[@caposdad]

Another great video Chuck

[@danielspencer582]

Your channel has helped me improve my skills and knowledge exponentially. My sheaths went from scraps of leather stuck together to clean professional looking items.

[@WeaverLeatherSupply]

Thank you so much, Daniel!

[@nothsim]

This the first video in a long time where I got excited about a craft. I wish there was a store I could go to do this kind of work.

[@JBCPuppydaddy]

I cannot get enough of the insight from this company. Chuck you are the man! Only reason it's Dorset cuz Norris is taken😂.

[@axe609]

Thanks for lightening up our morning. Love the long videos. Great looking sheath. Something I have done on thick layered projects when tying off is to pass all the way through from the thick side and then go back through the single layer, then bring the other thread through the single layer and tie. Didn't look like you had any problems there, on some projects it can help to keep the firmness if we don't have to flex the leather getting the needle through. Thanks again.

[@Gunflingergarage]

I just discovered these tutorials. Love it! Great job! Very informative and well delivered.

[@WeaverLeatherSupply]

Thank you so much!

[@winterfire567]

Hi there Chuck! This video reminded me I have a crescent knife (a boline, I think it's called?) and I've wanted to make a sheath for it for years! I wasn't sure how to go about it until I saw you make a welt. My project will be a bit more complicated just due to the general shape of the item, but you've given me a great jumping off point. I'm inspired! Thanks a bunch!

[@WeaverLeatherSupply]

That's great to hear! Thank you so much fro watching!

[@scottlanger832]

Great video, Chuck.. must be great working for a company, that encourages you to make what you love, and also teach the rest of us. Thanks again.

[@johnkennedyswenja]

Loved the video, especially the welt design.

[@WeaverLeatherSupply]

Thank you, John!

[@robertkirkpatrick75]

I have made alot more axe sheaths than I ever thought, so I have developed several different patterns to make each one as unique as possible. Great looking sheath and a nice color.

[@WeaverLeatherSupply]

Thank you, Robert!

[@tylerletourneau3785]

I’ve been interested and wanting to start leather crafting for some time now just don’t know where to start! Chuck just makes it looks so fun and easy

[@WeaverLeatherSupply]

Hi Tyler! We hope you give leatherworking a try! We just posted a new video with a pretty easy beginner project if you would like to check it out: kzbin.info/www/bejne/b2HNkKl9ac5qnKM

[@ArcticFlies56]

Chuck, you did a beautiful job!

[@bushcraftdan6969]

Great video Chuck veteran crafter and still love watching Different technique

[@wandacochrane202]

Wayne Thanks Chuck , great video as always .

[@ajbahe]

Man I love watching Chucks videos! But now I'm $400 into leather crafting tools!

[@budsiniard7907]

Very good looking axe sheath and helpful video Chuck. I always pick up some great time saving tips from you

[@philokrnotch387]

So upbeat and encouraging. It's like you've given me confidence to work it out. I love the programs that is going on. Step by step guidance. I am using scrap pieces and very primitive tools. Have already replaced the handle 2x and busted out a couple of functional sheaths. Mostly used what I have...duct tape and 12pk cardboard can go a long way, 2 years in a kitchen. Then moved to plastics and knots. Good design if your any good at drumming or macrame. But both of these were too tight and dulled my knives,. Can't tolerate a full knife on a restaurant line. Thank you good entertainment and knowledge base. Q? How would I get the nice edge without the nifty tool,. I figure a willow or softer wood would do it. Love your knives, hatchets, and tools and they will love you back with hard work.

[@oldschooljack3479]

Well done Chuck. This takes me back to one of my first leather projects... A cover for my axe bit. A tip for future video content: Leather muzzleloading accoutrements... Shooting bags, powder horn straps, flint wallets, tomahawk sheaths... "The sky's the limit" on that stuff. And you'll gain some more viewers.

[@SnUe1337]

Hey Chuck, first of all I love your channel and all of your videos. I do not understate when I say, that you are a kind of a mentor to me. I improved my leather work so much with your advices and tipps. I’ve got an “economical” suggestion for a video about knife blades. With a sharpening wood one can turn “every time new blade” into “every time sharpened knife”. I use jeweler’s rouge on mine. Greetings from germany (:

[@WeaverLeatherSupply]

Thank you so much and we appreciate the suggestion!

[@virgisbubulis7649]

Thanks for a video again. Maybe can do video about french style chisels and stitching?

[@alanandkarenrouse747]

Great video. I am going to remake all my ax covers. The ones I have look like a grade-schooler made them. I see now how to put in a welt. Thakns Chuck.

[@WeaverLeatherSupply]

Thank you! Glad it was helpful!

[@clarkhussey5865]

Nothing like a bic pen. Very informative video

[@eiward]

And he didn't even get dye on his shirt sleeve. A true master.

[@GolfPapa01]

You can't get dye on your sleeves if you don't have any sleeves to dye

[@joerunyan2438]

Thank You Chuck that was great! I have often wondered about using a drill press but was scared I would mess up a project. Always thinking tradition. Thanks again!!!

[@devinchong442]

Love the show! Could you give us some tips on using the strap cutter? You make it look easy, but it's kind of a finicky tool for me, thanks!

[@WeaverLeatherSupply]

Hi Devin, See if the video below helps! weaverleathersupply.com/learn/how-to-videos/tools/working-with-the-wooden-strap-cutter

[@anbu5189]

Hi bro I love leather craft works , you are way of craft work style is much more different by others I like it,,🤗

[@crude4u1948]

At 16:41 you start talking about staying in the groove line with the marker wheel but I've watched the video 4 or 5 time and I can't seem to follow where you put in the groove line.

[@WeaverLeatherSupply]

Hi there, at 8:11 is when the groove line is added all the way around the sheath. Hope that helps!

[@oscaryuan7812]

I made one of these for my ax last night, would love to share a photo with you!

[@The_Village_Smithy]

It's hard not to get caught up in Chuck's enthusiasm. I want to go make something now, except it's late at night and I'm in bed. But I'll tell you, I'll get making something soon.

[@goodboyringo9716]

The leather man ! Nice job no bull .

[@k_sey.9370]

Hey Chuck! Love the videos 😎🙏💪

[@WeaverLeatherSupply]

Thank you so much!

[@AxisDSTC]

Thank you! I found this helpfull while making my own version.

[@WeaverLeatherSupply]

Glad it helped!

[@Bestcabinetmaker]

Very nice job. Great instruction and good video. Well done!

[@honeysilveira2203]

Wonderfull, it´s quarentine time, let´s study!!! Cheers from Brazil!

[@WeaverLeatherSupply]

Cheers! Thanks o much for watching!

[@jprodriguez8566]

Great tutorial I need to make one for an axe I have. This is great timing, thank you

[@jasonmorris3422]

Chuck, I am a vendor at Ren Faires and need to make a cross carry double bit axe sheath. I make the sheathes now for my axes. I want to add a carry strap

[@gregoryh4601]

Hello Sir : have you ever thought in making things for Falconry? Sure could more people to buy from. Take a look an see what you think? Like Hoods,Anklets with two holes one for jesses an top hole for bells. Thanks

[@raykiii]

Here I was saying to myself "Wow, Chuck is so experienced that he eyeballed the exact length of thread he needed." As soon as I finished the thought you say, " I could have used a little more thread." You jump right off the pedestal I placed you on. Oh well, you're still my favorite leather craftsman. I noticed you didn't use Gum Tragacanth or Water when doing your edges. Did I just miss it or was there a reason for not using an edge finish to burnish with? I enjoy your videos, you inspire confidence.

[@WeaverLeatherSupply]

Hi Ray! I used water for the edge burnishing and I apologize if it wasn’t explained well in the video!

[@TemplesLongtailsandFurs]

Always a joy to watch your videos, lots of good information!

[@bobbybuttry6588]

You do nice work sir

[@charlieredeemed]

You are awesome!! Beautiful work!!

[@WeaverLeatherSupply]

Thank you, Charlie!

[@charlieredeemed]

@@WeaverLeatherSupply Yessir!👍👍

[@JBCPuppydaddy]

Thanks again Chuck

[@seanbeauchamp6102]

Awesome! you've got some great talent! Fantastic video too! easy to follow, and you're so positive! liked and subscribed! I'll share my axe sheath once its done! thanks again!

[@WeaverLeatherSupply]

Thank you so much!

[@monroeteemssr6175]

Hey chuck love your work I mostly do holsters and western rigs but was wondering can you or do you have a video on making speed loader cases thanks monroe teems

[@Chris-yo4ks]

Love the sheath. I made one for my Estwing axe. Different that how you made it, but your looks much nicer. I leave mine in my UTV all the time. Is there a product that can help protect the leather from being outside all the time? It is protected from rain and direct water, but it is outside all the time.

[@WeaverLeatherSupply]

Hi Chris, you can always condition it with a good leather conditioner like Aussie or Oakwood. That will help protect it from the elements.

[@wallyturgeon4633]

Looks great, you make it look so easy 👍

[@adamclayton1295]

Quick question... I know its a trick we used to use on metal, plexiglass, lexan, etc... I get the concept of the rounded inside corner. We used to put a small hole at the corners or the end of cracks. That held it at the hole. Does that work on leather as well? Or is it still really prone to tear even with just a small hole?

[@MrSnacks85]

thank you for the awesome tutorial. i made one for my daughters axe !

[@WeaverLeatherSupply]

That's great to hear - thank you for watching!

[@stevenjohnson2273]

Every shop, no matter what you do, should have one good axe. Never know when zombies or bill collectors might attack.

[@TheTrunks340]

Tru dat

[@skyjac92]

Another excellent video. I just made one of these a few days ago. A great project.

[@morganmccool6026]

Hey thanks so much for this tutorial, but how do you prevent the contact cement from interfering with the dye? I've ruined a few projects because the glued parts wouldn't take dye and as a result I've started dying first on all of my projects. Seeing this tutorial makes me think there must be something I'm not getting about how to properly apply glue. Anyway thanks and I love the channel

[@WeaverLeatherSupply]

HI Morgan, If there's any glue on the edge of the project, take some sandpaper and sand it off before dyeing. Otherwise the glue should only be sandwiched between the two pieces of leather and not visible. Hope that helps!

[@olddawgdreaming5715]

Beautifully done 👍👍.

[@michaelagalasso2389]

Chuck how come you never back stitch when you come to the end of the stitch line??

[@WeaverLeatherSupply]

Hi Michael, I just prefer to use a knot. No specific reason, I just like the security but it’s all personal preference.

[@johnd.crofts7901]

Great info Chuck. I'm hoping to use leather from a favorite pair of work boots that I've worn out. Any tips for using salvaged leather?

[@WeaverLeatherSupply]

Make sure the leather you are salvaging isn't cracked or close to cracking. If you clean it and condition it with some leather cleaner and conditioner you can cut it out according to your pattern and use as you would a new piece of leather. Hope that helps!

[@markedis5902]

Do you not find that drilling holes weakens the overall project? Wouldn’t it be better to use a diamond awl? I find that properly sharpened awl pushes the leather to the side of the hole it makes compressing it and making it stronger.

[@stephenclarke2546]

This guy is amazing :)

[@FredMcIntyre]

Awesome work! 😃👍🏻👊🏻

[@curtismccormick4392]

Can you make a belt clip leather sheath for hatchet ?

[@WeaverLeatherSupply]

Great suggestion! Thank you for watching our video.

[@thesaltlord844]

won't the dye on the inside bleed onto the axe without any finish applied?

[@WeaverLeatherSupply]

It shouldn't! Dye can sometimes rub off on clothing or skin but it shouldn't discolor the metal.

[@jameslund221]

My idea was that I could make a sheath cheaper than buying one, but buying all those leather crafting tools isn’t going to work. Do you think I could make one for my splitting maul without breaking the bank? I just need something to cover the sharp blade edge when I’m just going to use the sledge hammer side. I didn’t realize how sharp it was, and then it cut my leg without any pressure behind it. It just barely grazed my leg and it cut the entire length of the blade and wouldn’t stop bleeding until I cleaned it and bandaged it up. Thanks for your help.

[@WeaverLeatherSupply]

You should be able to make one without breaking the bank, some things like a straight edge and utility knife you may already have. The things you'll probably need to invest in would be, stitching chisels, needles and thread. Potentially a hole punch and snap setter if you're wanting to set a snap but there are alternate options you could use for a closure strap. Hope that helps!

[@TheTrunks340]

Nice project, but I have a quick, unrelated question: With antiqueing, I can can never consistently get it to come out right- one project it'll come out perfect, then the next three tries the whole project turns black. I know it's going to darken my color a bit, but how do I avoid that total blackening of the project?

[@WeaverLeatherSupply]

You can put a resist on the leather before antiquing, something like Bee Natural RTC and that will help the antique sink into the tooled areas of the leather. I’m not sure why it’s working one time and not the other though. I do recommend doing small areas at a time and wiping away the excess as you go. Let me know if that helps at all!

[@TheTrunks340]

@@WeaverLeatherSupply will do, thanks!

[@TheTrunks340]

@@WeaverLeatherSupply also, I'm usually working with small areas to begin with- typically no more than about 6 inches by 6 inches at a time. I don't know if I'm getting too much on somehow or what. I know I don't want to glop it on, but I need enough to go across the piece. I don't remember if you have a video specifically about antiquing, but it would make a good Leather Element.

[@TheTrunks340]

@@WeaverLeatherSupply I think I figured it out after diving deep into your video archives and testing my thought on a few practice pieces- in an old video about antiquing, you mention, almost as a throwaway thought, that you need to stir and agitate your antique. So the difference in my successful vs unsuccessful projects has likely been how I applied the antique to my dauber. After testing a few practice pieces, both with and without a resist, this seems to be the case.

[@whiskeytripable]

Thank you so much. This was a great video

[@WeaverLeatherSupply]

Thank you, Clayton!

[@flatdog-]

This is a great video -thanks

[@voodoowarrior7457]

Suppose you don’t own a drill press what then? How do you make the holes on the three ply?

[@WeaverLeatherSupply]

Hi Joe, You can either use a stitching awl to punch the holes or punch the holes in each piece prior to gluing them together. If you punch the holes prior to gluing just lay them side by side and if you go first tine last hole on the stitching chisel they should match right up!

[@johnruckman2320]

I've never seen that style of axe before. What is the make and model of it?

[@digitaIgorilla]

I don't have an Ax. But if I did, this would be my sheath of choice.

[@FrankieG411]

Chuck, Thank you again for another great instruction! Question: first, I am rather new to leather and am loving it. I have been working with veg tan bellies and have moved up to shoulders but when I die I am still getting splotches on the leather, I have used saddle soap and Fiebings deglazer but still get some splotches although less. Is this what I should expect or am I doing something wrong? The leather looks consistent with no visible blemishes. I use Fiebings Pro Dye. Any and all advise welcome. Thanks Oh an my blue looks nothing like yours :-(

[@WeaverLeatherSupply]

Don! I am so sorry you’re having trouble. I use the Single Shoulders on most projects and I haven’t had the issues your having. This isn’t common but I don’t know why this would be happening, particularly, once cleaned with a deglazer. Can you let me know if these are our shoulders?

[@FrankieG411]

@@WeaverLeatherSupply yup they are your single shoulders the 2/3 and the 3/4oz. perhaps we can take this off line and I can send you some pics of how they are turning out... any advise is welcome..... I've even used new containers