This is video on weaving crosses with some Dos and Don'ts :D
Пікірлер: 31
@YULitle16 жыл бұрын
It's possible to hold the cross straight with most machines, but easier with some than others. It is something that you should either do all the time or never as it is a major factor in job to job consistency.
@Nancytoday15 жыл бұрын
Wow, I was looking for something else about weaving on my loom, but wondered what this was. Very interesting to see how this is done. Well explained for those who need to do it!
@DucPhan2015 жыл бұрын
man, thank you for the tip on the keeping your fingers on the string while pulling. good stuff!
@MOGULMANv13 жыл бұрын
I have had a bad experience with non-electronic stringing machines. I have to rackets strung at 60/59. But after a while, they loosen up and it affects my game a little. Before this last/current stringer (non-electronic) I had my racket strung with a electronic Prince and my string stayed tight and lasted longer before breaking. How can you prevent this? Or why is this happening? Thanks.
@noshadsi15 жыл бұрын
YULitle, Im dying to see how to weave using one hand...ive heard a lot of ppl do it...i wouldn think its a faster way it just looks cool :-)
@hellojeffo16 жыл бұрын
I like ur house! It's so nice and neat, and we've got a 360 view! Anyways, thanks for the tips.. i can't do the finger thing with polys that well
@the4paths15 жыл бұрын
for one there is less tension so it should be easier and faster to weave the second weave than the first.
@JMUDoc15 жыл бұрын
It gets harder as you move down the racket, as there is less slack in the mains. I usually end up using a "sewing" action on the last couple of crosses, as pushing takes MORE time.
@steppinout677 жыл бұрын
0:55 It is most certainly not just as bad as pulling the cross string straight across. There is far less resistance when you push it down to the bottom.
@bc7176614 жыл бұрын
i do it all the time , pull 2 string at a time.. just add 2 pounds more ...that should adjust for the tension
@zeleboy16 жыл бұрын
nice video - i learnt something :)
@RubenHavertz15 жыл бұрын
In the end, while weaving the last crosses. I find it difficult to do the pushmotion. Do you have any advise to make it easyer? Thanks
@TheJwaffle14 жыл бұрын
So is it safe to say that on every cross you should always (with every stringing pattern and variation) start the weave under the first main?
@ollepigors8 жыл бұрын
This looks so easy when you guys do it! :( I string mainly with Monofilament/ Co-Polyester-strings, and these are sooo stiff!! It's really hard, even to just get a hold on the string. Any tips for weaving those stiff and hard strings?
@the4paths16 жыл бұрын
You rock. I have been stringing for a long time and my boss never taught me some of this. I have a spring loaded machine and not a electric; would i still be able to hold that cross efficiently and pull. It looks like it would slow me down. I push the cross against the other cross and pull then push it again to straighten. Any advise from you would be appreciated. Thnx. PS. you seem to have more knowledge than alot of the stringers I know and some of them have been doing it all there life.
@YULitle16 жыл бұрын
Yes. Always. Even with polyester. :D Though sometimes I pay for it.
@jonvdw16 жыл бұрын
Do you always use this method of weaving your crosses (between the tips of your fingers), even with polyester string?
@xxgt465xx15 жыл бұрын
Do an all poly job with luxilon Alu rough. My hands felt like I lit them on fire afterwards. The mains are fine, but weaving poly in the crosses is terrible.
@nwmstudios13 жыл бұрын
Why don't you pull the majority of the string through on the weave ahead before you pull tension on the previous string? That is leave enough to go into the tension head. I see it all the time, and it results in a 'hard pull' through of the slack string,
@Bratthahao14 жыл бұрын
haha very true. luxilon rough is not fun to string.
@YULitle13 жыл бұрын
@bc71766 Negative. It doesn't. Good stringers do not do this.
@YULitle15 жыл бұрын
:D Thanks
@xxgt465xx15 жыл бұрын
Yea thats no good. I had to do all luxilon Alu rough 16g @ 60 lbs. My fingers have been hurting since. stabbed my fingers a couple times and got a couple friction burns from that stuff.
@YULitle16 жыл бұрын
That's a hard question to answer with what little info you've given me. Shoot me an email via YT with more info about how often you string and a budget.
@xxgt465xx15 жыл бұрын
no this is normal. All poly jobs are just brutal in general.