CLOSE CALL on the Road to

[@nestogonzo1]

great vid, fun watching those kids grow up...

[@michaeldowns7449]

We come to Quartzsite every year for Quartzfest ham radio event, Rv show, and the swapmeet.

[@garryhammond3117]

Maybe I will catch you on the air - de VE3GHP.

[@rustyr6404]

68mph!! Thankful you made it. Fun to see you guys in Quartzite. The 3d printer would be interesting to watch.

[@paulstough2995]

Be in Quartzsite tomorrow evening for our 14th consecutive year. Most interesting products you have.

[@CraigHarland]

Sorry we will miss you in Quartsite , we are on or way from Az via plane to vist the Supershow in Florida this weekend. We love our insty connect that we have been using for a 2 years. We only had to put our Binoculars up a few time on our summer trips. The Insty is in a cabinet in our Class A and provides consistent service.

[@WeCanExploreIt]

Have fun at the super show!

[@Wandering_Kerrs]

We will see you there! We are in Q now. 5th wheel is the way to go. For what you do a Toy Hauler would be a good choice.

[@DennisWintjes2]

I would love to hear about your lessons learned on 3D printers. I think you should print an insty at every show. Thanks for sharing. Like #89

[@michaeldowns7449]

We would love to see one of your 3d printers. We bought an Insty last year from you and love it. It works great in the Arizona mountains in Flagstaff.

[@WeCanExploreIt]

We have it! We don't have enough plastic to have it print every day but we'll try for the busy days. Thanks!

[@MrGcee]

Where are you at the show? I’ll stop by to say hi. Love my Instyconnect. Bought it in Quartzsite last year. Should I upgrade to the new antenna?

[@WeCanExploreIt]

We are in the midway so outside the tent. See you here!

[@garryhammond3117]

Seeing your 3D printer "in action" would be awesome (sadly, I won't be there). - Cheers! I LOVE my Equalizer WD hitch! No way that your RV is 150/1500 towable - not even close - if it is longer than 25 or 26 feet.

[@azpunkboy]

Are you there next weekend as well?

[@azpunkboy]

Also, do the new stands with the wider base fit the older 5G Omni antenna?

[@WeCanExploreIt]

Yes, we will be there for the entire show.

[@WeCanExploreIt]

@@azpunkboy the new stands are a little shorter, you can zip tie the Cloudwing to it, it won't match perfectly, but it will work

[@harderja]

if you have sway control on your hitch turn the sway control off on your truck. With both of them on they will fight with each other.

[@WeCanExploreIt]

Thanks for the tip! I wondered if I should use it or not. Would you recommend using it with the equalizer now?

[@harderja]

My truck is an F150 with 3.5 turbo. I can tow 9600 lbs. and my trailer’s max weight is 7,000lbs. I use the 80% rule. Where you don’t go over 80% of the tow vehicle’s weight. More important than your truck’s towing rate is its payload. I've tested it with an equalizer hitch with a separate sway control bar. On my truck I can turn the truck’s sway control on and off while I’m driving. With the Truck’s sway control on my trailer feels like it’s going up and down on a roller coaster and a slight sway. When I turn the truck’s sway control off it all goes away. @@WeCanExploreIt

[@harderja]

try it off and see if it's better. You can turn it off/on while you are driving. I have an equalizer and I keep it off. If it's on I get camel hump and a little sway. Off is much more smooth. @@WeCanExploreIt

[@TravelingonAdventures]

Hey, we are at Quartzsite right now. Are you guys going to be at the Big Tent or in the vendors area? Would love to meetup with you guys! Been following you guys for years! We are home-based out of Tennessee as well. (We used to be Teachers on Adventures).

[@WeCanExploreIt]

Hey! Yes we're in the tent area but outside the tent. Stop by, would love to meet you guys!

[@CherishtheJourneyy]

That would be cool to see a 3D printer going and talk about it that is how you make it

[@gmajolyn2294]

Minnesota?

[@larryjanson4011]

i am not a computer geek. so a plastic printed part is junk to me. i have seen some things printed and will not dump any moneys into them.

[@WeCanExploreIt]

Do you think you'd be up for checking out what we print? If so stop by