Weld-Pak® 180i MP DV six month product test review

The Weld-Pak® 180i MP DV multi-process, dual-voltage welder was put to a six month test by a fabrication shop. Here's the owner's thoughts on this MIG, flux-cored, stick, DC TIG and aluminum welder.
For more info on the Weld-Pak® 180i MP DV, visit lincolnelectri...

[@markmathisen5708]

Thank you for your honest review. I've welded for almost 20 years and just wanted something reliable for the house and you just made my mind up. I love a good hard working machine as I tend to stretch them to the max after working in the field for so long.

[@LincolnElectricRetail]

Mark, thanks for your comment. If you would like more info or to find a retailer, here's the 180i MP DV website: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Wishing you a great 2023!

[@83flhs]

Lincoln wire is the best. I’ve been welding since 1980. Always been a Miller guy. Lincoln has stepped up its game. Like there new stuff. Good review.

[@mikebadger3758]

I just ordered one based on your review!

[@johnross6691]

I have the 140mp absolutely love it will consider the 180 mp now

[@LincolnElectricRetail]

Hey John, thanks for considering the 180i MP. If you need info on it, here's the website: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Please reply if you have any questions or comments. Thanks!

[@HH-cw1tl]

i love the way you just throw it on the table.

[@bensutherland6871]

Thanks for your review I've really been having a hard time figuring out what I want to get

[@briandeines5019]

I have a 180HD weld-pack and I'm happy with it but always looking for something better. Is this it? Mine came from Home Depot and I've been told that you get lower quality equipment from box stores. 120V is so much easier to find. Please let me know what you think.

[@dustinrichards8401]

Can it tig weld on aluminum

[@-gearsgarage-]

I bought 1 of these just yesterday, havnt used it yet because I need to know if I can run it off a generator for the 240 side without damaging it.

[@LincolnElectricRetail]

Thanks for your purchase! Here's info from the operator's manual pertaining to generators: The machine is designed to operate on engine driven generators as long as the auxiliary can supply adequate voltage, frequency and power as indicated in the “Technical Specification” Installation Section of this manual. The auxiliary supply of the generator must also meet the following conditions: Frequency: 60 Hz RMS voltage of the AC waveform: 90-250 V; Out of this range will trigger undervoltage and overvoltage protections. Generator Minimum 3 kW (120VAC) 6kW (230VAC) It is important to check these conditions because many engine driven generators produce high voltage spikes. Operation of this machine with engine driven generators not conforming to these conditions is not recommend and may damage the machine and is also NOT covered by warranty. You can view the owner's manual here: lincolnelectricretail.com/wp-content/uploads/2022/04/Weld-Pak-180i-MP-DV-Owners-Manual.pdf Hope this helps! Please write-back if you need more help.

[@ricardomontes373]

Nice welder. Thanks for the review.👌

[@joer5000]

Wht are your thoughts on the 180i my vs the 210 mp for home use. I have a 180pro mig currently but I want to learn how to weld with Tig also

[@Cornfedtex]

Dang I need one!! Been a welder for 10 years now wanted something small for the ranch this would be perfect!!

[@LincolnElectricRetail]

Hey Christopher, here is a link to the 180i MP website page. It has a list of the retailers who are selling the 180i MP in-store and/or online. lincolnelectricretail.com/products/weld-pak-180i-mp-dv/

[@braddiesel1813]

Need Help?? Been watching and reading a lot of reviews on welders. I really like this one because of the multi function and 120/240v selection. Question: Is the Lincoln 180i MP Dv a good enough welder to weld Hot rod Chassis Frame parts? Specifically shock mounts, Cnotch etc…??

[@LincolnElectricRetail]

Yes the Lincoln Electric Weld-Pak®180i MP DV is perfect for those welding applications. Refer to the process chart that comes with the 180i for the correct amperage and electrode or wire to use for the job. And remember to wear your PPE. Keep it safe!

[@io4067]

Would the LE31mp be a good choice for trailer repairs or for shock mounts, roll cage?

[@LincolnElectricRetail]

It depends on the thickness and type of metal. The LE31MP is rated to flux-cored weld up to 5/16" using .035 with multi-pass welds, powered by a 20 amp 120v circuit. Please refer to the manufacturer's specifications for the parts you are welding and take all safety precautions. For more info on the LE31MP, please visit: lincolnelectricretail.com/products/multi-process-stick-mig-tig-welder/

[@donsmith6205]

Thanks for the info… going with the 180i

[@kellyhoneyfeloncdljourney]

Hello, can you recommend a size of generator to pair this machine with for mobile purposes?

[@ethanlineberry4891]

There’s a stick welder/generator at harbor freight it’s a 7000 watt it should def have enough power to run it in the fuel if needed

[@hotohori0077]

How does the spoolgun do on this machine? I just got this machine and i wonder if it is good enough to run the spoolgun

[@LincolnElectricRetail]

Yes it's a spool gun-ready machine. You'll need a Magnum® 100SG spool gun Model# K5341-1. For more info on the 180i MP, visit the link below. If you scroll down the page, you'll see links to to technical docs. lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Or click on this link to view the brochure: bit.ly/180iMP_brochure Scroll down to the 'Quick Start Guide' image to view how easy it is to attach the spool gun. Hope this helps! Please reply if you have any more questions. Thanks.

[@edgarmanrique9007]

I bought the 180i ,but I keep tripping the breaker even when is a 20 amp breaker ,some advice would great .tnx

[@LincolnElectricRetail]

There could be several factors affecting this. We recommend you contact our customer service team. Here's their link: www.lincolnelectric.com/en/ask-the-experts Thanks

[@fantasma744]

Thank you for the review. Good first hand user info.

[@juancardenas600]

Have you tried the tig and stick feature? What’s your opinion on that

[@muddinkev44]

I have tried both. We use the stick feature often because it's a handy small machine and is better than dragging leads. We tried the lift arc tig once. We are pretty spoiled with our high frequency start machines so that feature doesn't get used much in our shop.

[@kalebmcdaniel9147]

What generator will run the 180i?

[@kenthaslem7613]

Question: Can the MIG gun remain installed while using the Stick function?

[@LincolnElectricRetail]

Yes. It's very easy to switch between MIG and stick. No need to remove the MIG gun. There are terminals on the front of the machine to easily attach the stick cable, and ground cable. And then use the push button selector to change from MIG to stick mode. Very simple! Here is a website where you can get more info and download the operator's manual: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/

[@joeystout6939]

How does this machine run on 3/32 6010?

[@briandeines5019]

how good are results with 120V C25 mild steel?

[@jackguess762]

I have the weld pak 180i mp dv. I have been looking for a better mig gun for it. Would the Lincoln magnum pro 100L k4528-1-8 (8 pin) work for the weld pak 180i? It fits the 140mp power mig. I’m just not sure about the connection that plugs into the brass terminal where the wire feeds into the gun. They seem to be different on most guns.

[@kellyhoneyfeloncdljourney]

Hello, will you share the part number for the tig torch and foot pedal that is compatible with this machine?

[@LincolnElectricRetail]

TIG WELDING FOOT PEDAL Model # K4361-1 TIG TORCH ASSEMBLY Model # K1782-16 (125 Amp TIG torch) or Model # K1782-17 (150 Amp TIG torch) If you want more info: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Hope this helps!

[@diegosandoval5550]

great video! What kind of generator is best for the 180?

[@LincolnElectricRetail]

Great question. We recommend the Lincoln Electric Bulldog 5500. The 180i is dual voltage and the Bulldog has both a 120 volt and a 240 volt AC receptacle. For more info, click here: lincolnelectricretail.com/products/bulldog-5500/ You'll find tech data and a list of retailers. Hope this helps and best of luck with your welding projects!

[@stanhall4965]

How would 6011 rods work with this machine?

[@LincolnElectricRetail]

For stick welding, the 180i has an output range of 25 to 160 amps if operating on a 230-volt circuit. This will give you enough power to use 3/32 and 1/8 for all projects, and 5/32 in most cases when welding flat or vertical. For info on the 180i: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Please reply if you have any more questions. Thanks Dan

[@stanhall4965]

Thank You@@LincolnElectricRetail

[@lukhernandez403]

Hello I'm interested start learning welding electrode, is this machine perfect for practice in the house?

[@LincolnElectricRetail]

Yes, you can do stick welding with this on standard household 120v circuit. It comes with a adapter plug to switch from 220 to 120v.

[@lukhernandez403]

@@LincolnElectricRetail thanks

[@Ben-sv9op]

Could this welder weld aluminum ?

[@LincolnElectricRetail]

Ben, yes. You'll need a Magnum Pro 100SG spool gun (Model # K4360-1). The retailer where you buy the 180i MP may also carry the spool gun kit. Here's a link to the 180i landing page which includes info about the spool gun: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Good luck with your welding project. And please reply if you have any more questions.

[@Ben-sv9op]

@@LincolnElectricRetail thank you

[@johnanddawnosborne3567]

Can you tell me if there is a difference in the 180i purchased from a dealer compared to a retailer?

[@LincolnElectricRetail]

Hey John and Dawn, the 180i MP DV is only sold through retail.

[@robertrodriguez8028]

I have a welder machine 180 Lincoln n the wire does not come out, I do not know what wrong with it, if same people know how to fix it, let me know n I will appreciate it,

[@LincolnElectricRetail]

The Lincoln Electric technical staff might be able to help you. Here is the link to information on how to contact them: www.lincolnelectric.com/en/ask-the-experts The Live Chat is available 8am to 5pm eastern time. There is also an email link so you can send a message to them anytime of the day. Good luck with solving your problem!

[@dannyoaks85]

What is the difference between running it on 120 and 240? I've done a lot of work with a weld pak 140, but looking for something a little heavier duty to grow with.

[@joeystout6939]

How does this machine run with 3/32 6010?

[@____3243]

@@joeystout6939it doesn’t run 6010

[@joeystout6939]

@@____3243 For some reason the one I had bought just like it runs 6010 roots on schd 80 carbon pipe no problem

[@____3243]

@@joeystout6939 really? I tried it on mine and it was running weird

[@joeystout6939]

@@____3243 I know it may be a dumb question but are you running electrode positive?

[@jasperdavis-nb2gm]

Amos for 240 volts, what's size breaker .

[@LincolnElectricRetail]

We recommend a minimum of 30A. For more info, including technical documents, visit: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/

[@dalebennett5227]

What size of breaker does use on 220 volts?

[@lifewithabe312]

30 amp

[@andrewgolub1347]

Appreciate that video

[@georgecasha2207]

Where I can order one for abroad

[@LincolnElectricRetail]

Thank you for your interest in the Weld-Pak(R) 180i MP DV. You can find them at Home Depot, Lowe's, Northern Tool, Blain's Farm & Fleet, North 40, Summit Racing and Grainger.

[@JOMaMa..]

Depends where she’s at my man

[@nelsonlazo686]

Work with 110 and 220 volts?? Or only with 120 and 230 volts!! Help please....

[@LincolnElectricRetail]

Nelson, The 180i MP is a dual voltage machine - 230v or the typical 120 household voltage. It comes with an adapter plug. For more info, visit: tps://lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Hope this helps to answer your question, but if you have others, please write back. Thanks for asking.

[@nelsonlazo686]

@@LincolnElectricRetail yeah but the thing is that in central America energy work with 110 volts and 220 volt, 10 volts less than USA

[@LincolnElectricRetail]

@@nelsonlazo686 Hey Nelson, yes it will work with 110 and 220 volts. And the input power needs to be 1 phase, 60 hertz which is fairly common but you may want to confirm with the company providing your electricity. For more info on the 180i MP: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/ Hope this helps and please reply if you have any more questions. Thank you!

[@lifewithabe312]

Will this run 308 stainless rod well?

[@LincolnElectricRetail]

Abe, yes the 180i MP DV has stick and reverse polarity capabilities so you should be able to run 308 stainless. If you are welding vertical up, it is suggested to use smaller rod diameters because vertical up requires higher amperage, and the 180i MP is rated at a maximum of 160 amps in stick mode. For more info on the 180i MP DV, visit: bit.ly/180i_MP_DV

[@MrSilrodant]

how long is the ground cable?

[@LincolnElectricRetail]

Crypto, the ground cable is 6 foot, 6 gauge. Here is a link if you want to view the brochure. lincolnelectricretail.com/wp-content/uploads/2022/05/05242022-9700375-180i-MP-DV-Weld-Pak-Brochure.pdf Hope this info helps.

[@Matticus289]

One thing is for sure, this video shows that machine will hold up to a lot of smacking

[@JOMaMa..]

Yea sir the red head quit last break

[@BIG_CHAIN]

I heard you say you use 240v what size breaker are you using?

[@WeldingBusinessOwnersPodcast]

I was using a 50amp breaker.

[@LincolnElectricRetail]

To get the best welding performance from the Weld-Pak®180i MP DV, you will need a 20a breaker when operating on 120v, and also a 20a breaker for operating on 240v. This information and other important points are included in the 180i MP DV operator's manual. You can view the pdf here: ch-delivery.lincolnelectric.com/api/public/content/a1d08c3840f44662870bd34afef2a523? For more info, visit the 180i MP DV webpage at: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/

[@jackguess762]

Will it run 6010?

[@LincolnElectricRetail]

Yes but use 3/32" or 1/8" if using a 120 volt circuit. If you are using 230 volts, you can use 5/32" and 3/16" however, the 180i delivers up to 180 amps using a 230 volt circuit, but some applications for 5/32" and 3/16" may require a higher amperage. For info on the 180i MP, visit: lincolnelectricretail.com/products/weld-pak-180i-mp-dv/

[@jackguess762]

Awesome thank you

[@JOMaMa..]

Classic Lincoln gona give u the truth on reviewing their own product

[@boricuaarecibo9259]

I want this I think I'm going to treat myself

[@muddinkev44]

Do it. You won't regret it.

[@BRENT3143945]

15ft mig gun that's what I need

[@trialnterror]

What do you think about the 180 weld pak for mig welding? For home use.

[@LincolnElectricRetail]

The WELD-PAK® 180HD is a MIG and fluxcored welder. So yes, it does MIG weld. The Weld-Pak 180i MP, is a multi-process welder. This is the welder that's being shown in the video you commented on. It comes ready to weld with fluxcored, MIG and stick. With a few additional accessories, it can weld on aluminum and can TIG weld. Here's a link to the 180i brochure: bit.ly/3gNg3m9 Hope this helps. Please write back if you have any other questions. Thanks!

[@muddinkev44]

It would the only welder I buy for home use. It's super versatile.