PLASMA or ARCAIR? The Future is Bright! The WELDERFABBER Chronicles Chapter

[@marcomcdowell8861]

I don't know this gentleman personally. I remember first seeing him on Asheville as the helicopter struggled to lift two massive men into the sky. Stumbled across his channel and have been hooked since. When you see hardworking individuals drive to better things with literal sweat and it pay off, even me, a complete stranger can get a touch emotional when they succeed even more. Congratulations on the partnership and lets get you to that subscription number so we can watch you travel the world and promote WF and Fox! PS. That truck lift at the end was madness!

[@welderfabber]

thanks bud

[@ianc_86]

Another awesome chronicle episode baz and the director, with your collaborations I'd love see you with CEE in Australia

[@welderfabber]

would be cool

[@colinweightman1056]

Yes I agree collaboration with Cutting Edge Engineering here In Australia I worked on heavy plant in mine sites around Australia I love to watch your channel found you through Asheville I am originally from Liverpool and Lived in Skelmersdale most of my life till I moved to Oz love seeing the areas you travel too keep up the tremendous content well in director

[@B.A_angling]

Cee and learn the line boring with him perfect for it tbf

[@zeroyon4562]

That plasma is awesome. Arc air is the biz! You’ll get good at it such that you only remove a weld fillet without damaging the parent metal. Look carefully at the Lorch machines, we run their 200A Micortig units and they’ve been very unreliable (we build stainless process equipment). We also have a Lorch cold wire feeder unit too and it’s also had its problems. I can’t speak for that particular machine though. Nice clear arc shots by the way.

[@MarkMunro-y8f]

Plasma is a Chinese punch. Gouger is an Australian punch that will take your head off.😂😂😂.

[@rgppayne4841]

Of course CEE here in Australia I also watch Andrew Camamata from upstate New York both work solo and both do amazing work.

[@sicknote26]

Andrew is the man

[@seagullsbtn]

Love cutting Edge Engineering. Kurtis is a one man machinist, welding guru.

[@jamessbryne]

I love Andrew but I wouldn't let him touch my wheelbarrow 😂

[@welderfabber]

I'll check andrew out

[@sicknote26]

@@welderfabber baz the stuff andrew gets up to wide range of stuff

[@gmcallsuk]

Curtis at CEE was using flat carbon rods for flush gouging. I am another one for a Welderfabber CEE collaboration.

[@dannypritchard1695]

That’s my lunchtime watching sorted. In sunny Taiwan.

[@Lamont-racing-231-senior-mini]

Would be good if the guy selling you the gear could gouge himself, been gouging over 11 years and he is showing you all wrong there 😂

[@slyboy1966]

Good news baz happy days. Don’t change anything this is why this channel is so good. Keep it real . Lovin my hat super fast delivery 📦 is the director like the stig never see his face 😂

[@welderfabber]

he is friends with him

[@patricebanio8224]

Can you collaborate with Foxys boyfriend

[@Seanmountford]

Congratulations on your new deal with the fox,you fully deserved every success,just keep it real this is what everyone loves about the videos.

[@welderfabber]

Thank you! Will do!

[@SkidM3rks]

allistairc123 does a lot of air arc gouging on his videos. He probably does a lot of similar repair jobs to you.

[@welderfabber]

yeah would love to learn from him

[@peters4067]

Baz, I’m surprised you’ve never used an air arc in your welding career! I run the air arc off an Esab Fabricator 500 amp machine at my work, mostly using 6mm carbons, sometimes 8mm.

[@beecleanltd6101]

First to comment , just done a night shift going to enjoy this and go sleep 😊

[@welderfabber]

must be awake by now thanks for being 1st and watching bud

[@th3n3rdman]

Obviously you need to get Cutting Edge on here! Also would be awesome to see you out there!

[@alswick0011]

Love the Content Fabber, Kudos to the director for the footage and the score. The Timelapse’s are epic and dramatic. Keep it Going! Own the welding side of things. Can you run through some do’s and fonts on using a Gas axe, MMA welding and Mig. Such as over head welding vertical welding and getting the voltage to amps right on thickness of materials welding. All the best!

[@dennisthomsett9468]

good work on the bucket , you have joined my list of favorite channels along with Snowball engineering , Cutting Edge Engineering and IC Weld , and congrats on the Kemppi awesome machine

[@barnzYT]

Welderfabber collaborating with CEE and ICweld would be legendary

[@welderfabber]

indeed

[@tyymclarenfan]

Work collab with Curtis cutting edge engineering baz 👍💯🇬🇧

[@welderfabber]

That would be cool

[@andrejones6794]

Love the channel Baz, the air arc and plasma was impressive but that crane was something else! CEE (Curtis) and On Fire Welding would be great collaborators. Keep up the good work!

[@richardsedorski1206]

Hi baz you definitely deserve worldwide recognition your vids are fab.😎😎😎👍👍👍

[@JimBoB-te7dw]

love the videos Barry u and the Director great team work your not afraid to get stuck in to the work men like that are far and few between now a days i also follow a lad for where i am from here in Ireland he’s called allistairc123 he’s in to his welding and fixing and repairing heavy plant keep up the good work 👍🏼👍🏼 John

[@welderfabber]

I follow him too top man

[@creon78]

Good to see stuff fixed and not chucked away. And in-house 👍

[@davefaulder]

I reckon Cutting Edge Engineering is going to be the number one suggestion

[@welderfabber]

seems so

[@ernestdoleman2487]

I'm interested in how the Kemppi performs in all special settings (pulse, double pulse , and gouging). I look forward to you putting it to the test . Thanks again Welderfabber!

[@philipthomas2452]

Very informative and for me exciting, I enjoy learning things I know absolutely nothing about. Please keep up the great content coming

[@vinegarjoe9706]

The Kemppi rep was talking double Dutch to any non-Fab, non-welder viewers out there. There are plenty of us who enjoy watching your vids, but have no base knowledge of the processes. Keep it simple, so we can keep up, otherwise you will lose us..........

[@calumdavies5660]

Never been on camera and I was unbelievably clunky and awkward, my apologies being on film doesn’t suit me clearly 👍🏻😂

[@welderfabber]

he's a top bloke 1st time on cam be cool bud

[@lemmy9996]

Got to be a collab with the OG, Kurtis. Foxy said that all Baz needs is 1million subs and he's on that plane to Brisbane👍 I'd love to see the different ways that Baz and Kurtis go about fixing stuff.

[@scottjohnson7024]

Love the channel Baz. Hope to see you and your right hand man Cal grow together. Keep up the positive energy. I'll keep watching from Minnesota.

[@jmjmservices]

Hello Baz..Irish guy from Dublin.. watching you from alberta Canada.. watched you from the start..great show..thanks

[@welderfabber]

cheers

[@LoBeau53]

I can certainly see the production advantages to the hypothermia plasma gouging over carbon arc. I run a Miller 301G and burn 8mm carbon rods at 250 to 275 amps all day long. I likes 6mm better but with a more delicate touch 8mm works fine. The only real advantage is a smaller groove with the 6mm. Where I use to work, one of our main jobs was the rebuilding of 400 ton mining truck dump bodies. The boys would hook two 600 amp millers in tandem and single cut through 3/4” A R400 ON 1/2” backing plate with 1/2” carbon arc rods. They were not always available. It sometimes we could get hollow core 1/2” carbons. They removed just as much metal with less noise and less smoke.

[@pauljohn6637]

Excellent news Baz and the director. Paul Fox seems to be a great boss, obviously has a lot on his plate but seems hands on and gets involved in all aspects of his business. 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿🇺🇸

[@welderfabber]

Cheers

[@garlenseong38]

Good choice on the hypertherm plasma. They make nice plasma cutters....

[@stephen8468]

Baz, Could you do a segment in a episode explaining a bit about your background, how you started out in the industry and where you acquired your skills, knowledge ect Really enjoying the channel

[@welderfabber]

Ye will do mate

[@GoldenCaptainPhoenix]

My name is Jai. I am 7. I like watching you with my daddy. The machine was like a laser beam. ☄️

[@welderfabber]

sure was jai

[@ypaulbrown]

good morning BAZ......sent a message to Curtis and Karen from CEE about you giving them a shout out......cheers from Florida, Paul

[@rjc122]

Baz I like to see you do welding on the new reactor at Hinckley point. Also how come your company buying equipment to use at foxes ??

[@Reel-steel]

Baz you gotta do a collaboration with Parker’s head spanner Mitch , get on them big wash plants . Keep up with the good content

[@pauljoseph8338]

Mr WeldFab is a huge scary gent. You wouldn’t want to make him angry.

[@simonjones7785]

I subed as soon as I found it baz great channel just dont change the presentation honest forthright straight . like Id expect from a yorkshire lad

[@julianhawker7672]

The guy from Kemmpi welders looked like a mountain of a fella! Collabs: Snowball, Curtis and IC

[@calumdavies5660]

Hi Julian, I work as senior sales demonstrator for Brookside Welding Supplies Ltd, I just had my Kemppi jacket on not my work jacket 😂👍🏻

[@peterdyer477]

welderfabber do a vlog with the proffesional struggler chris would be interest cheers all the best with the channel and the director.

[@penningtoncolin]

Now then Baz you just been spotted on m6 going past porche garage near carforth😀

[@RichardArblaster]

42:33 that's a beast of a bucket, the wheelspin off the poor little forklift 😆😆😆

[@proluxelectronics7419]

Your on the rise, just keep your personal life out of the video's, Nothing more off-putting is flying round in choppers and holiday antics. Just make it job.

[@elliottchappell1260]

Imagine welder fabber meets the lads at Tekamo HD. Be brilliant

[@kevinprendergast3259]

Nice music to finish off the episode, sounds like stranger things,👌👍

[@allenbrown7820]

Congratulations on the news from the Fox! Well deserved.Looks like the Lads are getting the hang of the new machines.Any collaboration would be fine with me,there are some great suggestions so far. Y’all Be Good and Stay Safe.

[@eweunkettles8207]

a pal went for a job and you also had a gouging test he had the jets facing backward and it blew his helmet off a good operator on gouging would embarrass the plasmacutter hands down more amps needed too it can be used like a surgeon

[@RickyDove]

I'm liking the channel baz, keep up the awesome content buddy 👍

[@XLbullyZeus]

CCE 100% you both are very similar in what you do that would be a great to see you both together

[@mikeyb784]

good stuff baz n director the fox knows a good thing when he sees it ,loyalty hard come by these days

[@donaldmendes184]

Congratulations on your merger with fox.😂

[@Eavis_excavations]

Great video yet again all the best for welderfabber ltd The some hiab to pick that bucket up at the distance he was from it 🔥👨🏻‍🏭

[@rubengalindez7448]

👉🤐🤐🤐🤐😶😶😶😶😶😶👈

[@markarmstrong2592]

Baz congrats on the GREAT news that FOXY has joined you. Big things will happen know use might be in same boat as Daniel and get on worldwide TV i hope so great content as normal. See you on the next one cheers

[@conormccrea4408]

Check out i.c weld he is like a surgeon with the gas axe he is great to watch really starting to get into your videos great work

[@bryanharrison3689]

kurtis from down under i'll carry your case.

[@garysides636]

Hi Baz / Director ,Loving the new cutting equipment....and vlog. Congrats on the Fox / WF Collab and I'm looking forward to seeing who comes forward .....I'm sure cutting edge will be in touch mate ! You're now another of my weekly subscriptions I love to watch and keep up to the heavy plant adventures. I think this world needs some more straight talking people and those who want to get their hands dirty and work hard to earn some cash and a lifestyle. Keep up the great work 👍🏻👍🏻👍🏻 Be safe , be happy 🦉🦉Gary

[@welderfabber]

thanks gary

[@pauliboo22]

CURTIS @ CUTTING EDGE ENGINEERING .. sorry for shouting, but he could do with your help with his crane project

[@DJProjectss]

Top video Baz and the director and amazing news with the Fox 🦊 👊

[@unclebob8139]

D&J in Da house 👍

[@welderfabber]

skys the limit

[@zeff1015]

Congrats Baz! Fantastic news. Keep the videos coming.

[@daryljohnson9378]

Hey Baz, love to see you put the Kemppi through its paces, particularly on Alum, Cheers Mate.

[@welderfabber]

No worries will do

[@andybonney2582]

Smashing it now Baz! That arc air is some bit of kit!

[@stephengolya4842]

Great channel, lots of interesting content. Keep it up.

[@littleredreiner6446]

What electrical service do you have in your shop to run the airArc? I'd love to run 8mm carbons, but my machines won't support them😢 ... Cheers from USA.

[@southwestaudio]

Andrew camarata would be a hell of a collab if you could do it baz

[@ypaulbrown]

Dear BAZ, if you have not seen his Channel, Greg at On Fire Welding does field work out in California and uses both Plasma and CAC for bucket work.....hope this helps.....PB

[@welderfabber]

Yeah he's good

[@waltweatherholt]

Congratulations on your success, from the United States brother. Love your channel.

[@welderfabber]

Much appreciated!

[@repaircollc]

I just bought a hypertherm 45xp and it has changed my game completely! They are truly amazing tools, can't believe I waited so long to get one. I think you will have a cnc table in no time if you get one. Great channel thanks for the show!

[@welderfabber]

I have a 45 in the van mate. Proper little thing

[@markh5433]

Team up with Tom Pemberton farm, he needs welding jobs doing etc etc he’s in Lytham

[@welderfabber]

thats not far away my mum live there

[@herbstjohann6057]

Ich glaube, ein normalsterblicher Mensch kann sich so eine Maschine nicht leisten, da solche elektroden schon sehr viel Geld kosten, ich bewundere solche Maschinen die mit Luft von dem anderen Material getrennt werden können? Einfach eine super teure Maschine?😢😢 LG.herbst johann/ Österreich

[@beckyb943]

come over to the states see on fire welding

[@scoopbroadbent]

Great channel love the content. Deffo Australia CEE… love Homeless! But and a big but sort Daniels bins out first, the bucket you did for him… I’m now fixed to you!

[@welderfabber]

haha them bins

[@georgehill6569]

Greetings from Oklahoma USA love the channel and love the welder

[@welderfabber]

Awesome! Thank you!

[@ExhaustCraft1968]

Express Cutting and Welding is a great company. Lorch welders are also excellent

[@welderfabber]

Yes they are!

[@Taylor40667]

Why didnt u spec a camera from factory? Youve added air con to a basic van, if you went for the premium model it comes with air con, factory 360 reverse camera, better seat, plastic covere for the wheels and a better looking grille 50k list for the van were a premium is only £1000 more And surprised didnt go for the big boy 190 not 170 bhp To be a flagship van

[@welderfabber]

We got what we could and its great, the waiting times on new vans at the time was crazy

[@richardlyons7582]

Baz see you got a mention on the latest "alistair 123" of people to watch. Think you would enjoy the massive job he's doing on a crusher.

[@welderfabber]

seen it, he's a top man for even taking that job on

[@abuubaydullah1]

Awesome video as all ways Baz looking forward to seeing how the new machine's get on and Can't wait to see some Aluminum welding you've got a great team of lads who just get their heads down an get on with it no matter what the jobs are looking forward to the next video.

[@welderfabber]

thanks

[@Saki630]

I am happy to be subscribed after watching your field repair a month back. You have gotten three times the subs and a proper following. This far along and I still don’t really know who Fox group is. Are they a company solely focused on providing maintenance and repair for local projects?

[@welderfabber]

They are 15 or so company's doing a lot of stuff I will get foxy on at some point to explain.

[@jonbell2305]

Great video as always mate. Just a tip as I know what people are like and seeing what's on your van bud a small fortune. Them locks you have yeah there ok for the normal person but a professional it's only a couple of minutes longer. I use electromagnetic locks on my vans run off a separate twin battery 12v set up with charger direct from the main battery. So if they take the main battery off my magnetic locks still work upto 48 hrs. They'd need to cut the doors off to get inside. Built it myself from bits on ebay. I had 2 lorry batteries anyway so that cut cost. But well worth it. Nice one on the partner with big boss man he seams like a genuine man. But he defo needs to winde up O'Donovan put needs to be filmed 🤣🤣🤣

[@welderfabber]

Cheers pal for the info

[@tomhudson7455]

Collaborate with cutting edge engineering in Australia 🤣. Great vids baz.

[@welderfabber]

That would be cool

[@danielprice7903]

Baz Baz Baz , loving the channel, I’m hooked , am an ashville sub , but I have to be honest haven’t watched any of his content since I discovered you , excellent work , u seem like a top man to work for , but I must say I did feel a bit sorry for your man from express welding when you reviled you bought you big mig from someone else , what happened there Baz ,

[@welderfabber]

It didnt have the juice I did buy the plasma and spend a lot with him monthly.

[@davidkelly9218]

Great videos. Every process has its place and is better suited for different jobs. I am surprised with your experience you had never used the arc air before. Especially working around heavy equipment and bucket repairs.

[@welderfabber]

Nope never mate, I was brought up using gouging rods on the stick set

[@Pepps_Electrical]

Need to get some clear PPF around and below them locks Boi to stop the keys from scratching the paint work done it on my transit custom👌🏼👍🏼

[@welderfabber]

Good tip

[@andyborge8992]

Hi Baz,brilliant content mate,keep up the good work 👍👍

[@welderfabber]

Thanks 👍

[@nicksmith2468]

Baz Have a look at Jasic MIG welders if you get chance.

[@welderfabber]

we have a tig Jasic

[@jascollinscork]

Cracking video Baz! Congratulations on the deal with 🦊!! Man spots quality easily!! Enjoyed the loading of buckets some rig!! I hope we’ll see the fitting of bucket to 550? I want to see what it loading, rubbish…. Wood chip maybe?

[@garlenseong38]

Keep up the good work...

[@ypaulbrown]

9:00, holy smokes, that is one serious cutting machine.......I use a Hypertherm from the 'OLD DAYS'.....1990 model...... no where near that much power.......cheers, PB

[@stephenmeeks684]

2 months ago you tested air arc gouging. Kurtis uses a set that has flat electrodes for smoothing out and cleaning off welds and slag. You may want to look into it.

[@welderfabber]

We are mate, we’ll explore everything over our weekly chapters. Plenty to go at next year. Thanks for watching

[@davecatton8773]

Baz don't lose your practical attitude !! no bullshit just lets get it done ! from on its side tipper hire !!!

[@user-ox4eu3xi3s]

thing about this channel, what you see is what you get, nothing made up, its a case of what ever the job happens to be is what we all get to see, we all know half or more than half of youtube is people making up videos just for views

[@Earthworm86]

Baz, maybe a collaboration with I C weld, love your content, 👌

[@welderfabber]

Maybe one day!

[@johnmm8522]

Baz could you explain the pulse in the welder's . Like your way of working keep the videos coming

[@calumdavies5660]

Pulse Mig/Mag process will help with reducing the heat input, therefore helping to reduce distortion 👍🏻 it’s also fantastic for welding thin materials as pulse will allow you to stay in spray transfer rather than short circuit, helping with spatter 👍🏻

[@stevenoshannon]

Dual pulse on 1.5mm aluminium 😉

[@Pepps_Electrical]

Wow that’s amazing news from the fox can’t wait to see you collaborating with people around the world My no1 watching over anything!! Keep it up Bazza Boi 👌🏼👍🏼

[@Ghostface0911]

Hi Baz and Director. Great news about the Fox...Congrats. Question..Is the Fox still a grafter Or is he Gone to the comfy side and sat in a seat all day? Cant wait to see whats coming in the future, im excited for the channel. one collab id love to see is with a lad called alistairc123, his skills are just mind blowing, love seeing the lads cracking on with the new gear, its gonna make a massive difference to the time and quality of tthe work, you will be flying through all them buckets in the yard.

[@MrBugi0]

Let’s see a Kempi episode!!!

[@richpbrown2]

Great to hear, maybe speak to alaisterc123, he gave you a shout out and does loads of arch gouging on his channel

[@welderfabber]

I saw it

[@chuckholmberg5728]

Baz they make flat carbons as well I keep a assortment of them in my truck 5/16” and 3/8” round and then I believe the flat ones are 3/8 as well they work great for doing final prep I run a 600 amp miller air pak keep up the awesome content 🙌🙌😂