Best Tricks for Tig Welding Tight Corners

[@weldHAGOJIBI]

여러분 안녕하세요. 좁은 구석을 용접하는 방법은 여러가지가 있습니다. 그중에서 어떤 용접방법이 가장 좋은 선택일까요? 그리고 텅스텐이 길어졌을때 생기는 쉴드가스의 문제점에 대한 내용도 동영상에 일부 담았습니다. 그리고 쉴드가스와 노즐의 연관성에 대한 내용은 차후에 더 자세하게 소개시켜드리도록 하겠습니다. 시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요. 사용된 알곤용접기 내쇼날시스템 300암페어 AC DC 알곤 용접기 AC DC NST 300FD ↓↓↓↓↓↓ 네이버 쇼핑 bit.ly/39OiCRL smartstore.naver.com/tigwelding/products/6842018935 용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다. ↓↓↓↓↓↓↓ [e-mail] 내쇼날시스템 대표전화 051-941-9701~2

[@MrSaemichlaus]

The key is to keep gas flow laminar and wide. High gas flow results in air getting pulled in from the side and mixing with the shielding gas turbulently. For that reason, keep nozzle big, gas flow low and use a gas mesh. Set plenty of pre-flow time of the gas so the gas flow pattern can stabilize before welding starts. You could also stabilize the shielding gas cover by making an enclosure that fits the geometry of the welding area and introducing shielding gas through a nozzle on there.

[@xylosfurniture]

Is this just turbulence or is it pulling air like a venturi effect type of thing? Sorry, I'm new to TIG welding. Thanks.

[@MrSaemichlaus]

​@@xylosfurniture Both effects probably happen to some degree. You can never really know because the gas is invisible.

[@RR31982]

This is all good tips and information. Thank you 👍

[@doomslayer5044]

as a beginner in tig welding, im thankful for the information and the time you took just to teach others from your knowledge, thank you very much

[@flatwater5]

Best welding channel on KZbin. Thank you, HAGOJIBI, for freely sharing your knowledge and experience! I never fail to learn something from watching your videos. Salute!

[@descargaelbano]

Between watching Hagojibi and Jody at "Welding Tips and Tricks", one can't go wrong in their quest for learning to master tig welding.

[@flatwater5]

@@descargaelbano I would agree. Meant no disrespect to Jody. He and HAGOJIBI have forgotten more about welding than I will ever know. Couldn't have better teachers or mentors than these two. I could watch them weld for days.

[@Sailingon]

Explained so well language isn't a barrier. Subtitles just confirmed your demonstration

[@kieranloftus6807]

Great work sir, thank you for sharing your terrific skills with us, a generous man.

[@HeavyHiitter]

Fantastic video. Very thorough explanation. Thank you.

[@michaelbeblo1827]

Just started tig welding in college last week, these videos are so helpful! Thank you so much, please keep posting!

[@smok9501]

Merci beaucoup pour toute cette expérience partagée. La diplomatie le calme et les détails dans les explications , qu’elle pédagogie ! Franchement l’un des meilleurs. Bonne continuation

[@翔太-x9x]

まだ溶接の仕事をして間もないので現場での溶接でとても苦戦しています。 いろんなパターンを紹介していただいているのでとてもありがたいですし、私もたくさん学んでます。 いつも有益な情報ありがとうございます！

[@J.D.Mc.]

Thank you Master Welder. 🙇🏼‍♂️

[@ArhipovskyRuslan]

Каждый раз с интересом смотрю Ваши видео. Спасибо большое🤝

[@metalhead2476]

Why do I watch these videos at 3am? I'm not even welding.

[@MonkeyDT]

KZbin 😂🥲

[@widespectrumcreators4691]

😅😅😅😅👍👍

[@rafalski573]

To znak! Nie lekceważ go!

[@nicholaswalker5219]

Same 😂

[@vimaljimoti5703]

Bro even you don't understand the language 😂😂😂😂 All of us are programmed

[@zvonkoilic128]

It's a real pleasure to watch your videos, and above all, they are very detailed, which helps us, who are beginners in the world of welding, a lot to familiarize ourselves with the basics of work.

[@drmarkintexas-400]

Thank you for sharing 🤗🙏💪🏆

[@ЕгоровАлексей-м3р]

Джин спасибо! Снова что то новенькое). Обычно в таких случаях ставят другое сопло или другой рукав где маленькая горелка и линза маленькая) А так очень познавательно спасибо за твой труд!!!

[@kxrch2108]

Вторая серия называется

[@spudnickuk]

The only person on youtube that shows a proper insight of how to weld properly, Tip use another gas line to purge gas into the tight area's if you don't have a good selection of shrouds.

[@МаксимБалахонов-к7ж]

Отличный видос , все как всегда на высоте без лишней воды и понятно !!!

[@geraldogildejesus1608]

Eu não perco uma aula do HAGOJIBI ..

[@21gioni]

I’ve never seen a nozzle like that which you used. I have however used a miniature torch head in tight situations like that. The nozzle is 5 mm diameter the whole torch head is only 30 mm in size. I used it to weld two V8 engines together to make a V16 engine for an American Hot Rod Street machine. The engine even received plenty of media attention when it was completed. It was designed by an engineer from Marcopolo

[@Kulak-223]

Классно! Спасибо Мастер! Я делал так но газ не прибавлял, глубина была меньше. Всё получилось!

[@gianpaolofollesa1046]

I tuoi video sono così chiari, precisi, tecnici che veramente, non riuscirei a immaginare come potresti migliorarli! Complimenti,sei un campione!

[@pscuirvbg45]

Дякую! Нехай щастить, здоров'я буде і руки не болять!

[@billarroo1]

Nice job getting in deep. Thanks

[@orest6959]

Thank you for very useful video!!!!!

[@tomthompson7400]

Always good to have a tip ,,, especially for tight corners , like most here , Ive been in a few of them.

[@Native_love]

Kam-sah-mi-dah! Thank you! Excellent video!

[@максимтрофимов-у9х]

От души тебе.. Хорошо что на свете есть люди, которые делятся опытом.. а главное доходчиво...

[@JarkoKorpi]

Thanks! Kiitos! Tätä en tiennyt, olen käyttänyt liikaa kaasunvirtausta ja ihmetellyt, kun elektroni ja hitsi on tummia. Teksti suomeksi huippu hyvä käännös.👏👍👍👍👨‍🏭

[@РоманСологуб-ф5т]

Профессионально, спасибо за обзоры.

[@geraldogildejesus1608]

EU GOSTARIA DE COMPRAR UMA MAQUINA DESSA.

[@montybrown3792]

I thought you might weld with the small long cup with lowered gas pressure to see if that works the best. 👍🏼

[@viton7262]

Спасибо за подробное описание процессов сварки и титры !!!!! Смотрю вас с Украины ....

[@sohaipsroyji5583]

Thank you for the good explanation

[@hamshansi643]

Vielen Dank ihre Videos sind sehr gut gemacht, ich liebe sie. Es ist sehr gut erklärt und dargestellt. Vielen herzlichen Dank für die gute Hilfe

[@octymocty132]

Or the other way--- I used to get a diamond tip cutter form the grinding department and cut mu gas shrouds at angles to fit the gaps ( or get them to cut if it was the grumpy git ) 👍❤

[@viorsa8200]

Excelente tutorial maestro, buenos consejos y mejores demostraciones, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👍🤓😜

[@sapa847]

Good as always! Showed and explained! Well done!

[@MikeYurbasovich]

Much love for HagoJibi. I love your videos. Teach!

[@kcgjun]

오늘도 좋은 영상 감사합니다^^~

[@ЮрийИгоревич-я1я]

Спасибо, даже без перевода все доходчиво и понятно.

[@patricksalmon3494]

Super pour les soudures en coins serré,je n'aurais jamais pensé à ça. Un énorme merci pour cette explication,cela va m'aider énormément.

[@mirco8198]

Thanks!! 😍👏👏

[@Diy-welding.]

Thanks friend for sharing your welding techniques I'm starting welding

[@melgross]

Excellent practical explanations and examples as always!

[@성영윤-f9c]

여기보다 체계적인 영상을 없는것 같네요 현재회사에서 저 롱소켓을 없네요 대구경만 있는데 구경에 맞게 가스량을 적절한게 좋다는 말씀이네요

[@nightmare-9646]

Like from the moment!

[@user-SWL]

Спасибо! Очень познавательно.👍

[@jordic6188]

Hi from France, and thanks a lot for all your good advice. Your videos are as clean as your welds, always a pleasure to watch.

[@fabioalves6690]

Very good! Thank you for the video.

[@Монологиожелезках]

Спасибо! Полезное видео. Благодарю за работу по созданию качественного видео!

[@jimrooper9867]

Thx good video .

[@prebaned]

All this just to show a gas lens is better than standard.

[@RapanWhite]

Большое профессиональное Спасибо!

[@NoYouAreNotDreaming]

few mistakes...on that 11mm nozzle you made mistake of leaving high gas flow...you should have put it down to 6l...smaller nozzle lower gas flow

[@Isegrimm66]

Thanks for the video, this video is absolutely top notch. My admiration and humility is immense. Greetings from Switzerland.

[@JyrralVonUeberwald]

For situations like this, I usually use a backing shield for the inside of the tight angle, bevel the mating surfaces, and do a complete joint penetration weld. If the inside needs a weld for reinforcement purposes, when practical I machine a block of material to fit on the inside of the corner and weld that into position with the first pass of the CJP joint as if it were a backing strip before fully welding it from the other side.

[@JyrralVonUeberwald]

*As codes allow, of course. For most things it won't really matter how you do it, but for certain applications joints like this are to be avoided in certain codes, which may have joint design stipulations as to what is permitted for manufacture.

[@hectorr814]

EXCELENTE VIDEO¡¡... SALUDOS DESDE MEXICO¡¡

[@baronblansit]

This is very good instruction.

[@ypaulbrown]

this is wonderful, thank you so much from Florida, USA...Paul

[@kasparsk5008]

This is quite an interesting example of turbulent gas mixing with air because of the venturi effect, where the higher speed of the gas with the lower nozzle creates a lot of turbulence that picks up air because of lower pressure generated by the venturi effect. Counterintuitive, but it's something more skilled welders learn over time with experience, while not fully knowing the details. Learning why something happens helps to better prepare for other issues as well. :)

[@wiedzmin10a]

Super film 👍👍👍

[@zvezdah2362]

좋은 영상 감사합니다 질 배우고 갑니다^^

[@Krystianc98]

Good video. I like the music in the back. But they all don’t look like the good bead we want! So we just gotta send it and get it done, that’s a tight ass corner

[@4Briut]

Круто, great! Благодарю, счастья для всех :)

[@user-im5rp4qx4p]

Спасибо мастер, всё по делу без лишних слов, ещё бы перевод на русский было бы отлично.

[@omskajaptiza5262]

Субтитры русские есть. Если они автоматические, то перевод намного лучше, чем рассказывают какие-нибудь "знатоки" на родном русском

[@4Briut]

@@omskajaptiza5262 точно, нормальные там субтитры, всё понимается.

[@Rais_Ulbl]

В 92-94 годах при большом количестве деталей с такими углами или глубоких щелей, я их в вакуумной камере сваривал, если немного было в сопло медную или нержавеющую трубку со сплющенным концом вставлял, чтобы электрод лишнего не вылезал. Мастеру лайк

[@simonsalda]

Salve anch'io sono un saldatore TIG con 30 anni di esperienza, mi piacciono i tuoi video perché usi la tua esperienza e la dedichi a noi.

[@joea5729]

Very helpful and informative. Thank you. Thanks especially for the subtitles.

[@youssefezzahidy5254]

Thank you

[@rafalski573]

Ciekawy film i wyjaśnienie wpływu gazu. Masz gdzieś filmy na których bardziej szczegółowo wpływ gazu na spawanie?

[@simonmoran6009]

Impressive 👌💯🍀…. Excellent videos, keep up the good work 🥇

[@B.M.SteelAndThaiVision]

Thanks for giving good idea 💡❤️

[@Ecclesiasticus]

What was the gas flow on these three welds? Hard to read the gauge. More than 20 liters per minute?

[@MikeFico998]

Dude all three welds were Flawless

[@dewiyulya9181]

Terimakasih anda guru terbaik..👍👍

[@あまさけ]

good👏👏👏

[@정이은-v6x]

안그래도 최근에 저런상황이 나왔었는데, 큰노즐이 나았겠군요ㅎㅎ 5호는 산화가되서 6호로 산화만 겨우피해서 용접했었는데ㅠㅜ 좋은팁 배워갑니다!

[@sergeiviserjonovic6499]

작가가 영어를 못한다!?

[@adriankohli4870]

Mega tolles Video👌

[@최정진-g6c]

티그악세사리 중에 세라믹 도자 말고 석영으로 된 악세사리가ㅜ있는데 한번 리뷰 해주심 감사하겠습니다. 다른 채널에도 많이 리뷰 되는데 현장 배테랑의 리뷰보다는 업자 들 위주의 리뷰여서 신뢰감이 ㅠㅠ 항상 좋은 영상 감사합니다.

[@thefreedomguyuk]

Increasing gas flow. Very obvious. It's just a case of me never having thought of it. Thank you, Mylord !!

[@starofeden9277]

very interesting you are clever

[@tlsgusdmq]

멋지십니다 좋은 정보 감사드려요

[@Алекс-ы2ю6х]

Самида это слово он повторял намного чаще чем другие в этом видео 😁

[@kxrch2108]

😂😂😂

[@needmoreboost6369]

Excellent sir! thank you!

[@nuneznaiu4512]

Как всегда интересно! 👍

[@miguelcettour6827]

Muy buena su información Saludos desde Argentina

[@zebac1958]

Good tech. Thanks for sharing

[@adam1107x]

版主太讚了!這瓷杯實用!小弟我曾經用直徑13MM 的TIG直軟槍,改加長槍身,焊上下空間間距 20MM波紋管接板, 縱深長度 222MM的 2MM厚不鏽鋼1:1全滲透焊接! 近年來很多 TIG 瓷杯口內壁鑄模不良有溝痕眩旋流勾氧,銅束座前端四2.5MM十字氣孔太小氣急旋出瓷杯口旋流勾帶氧氣 ,氧化熔蝕鎢棒及焊道 還有銅束材質 鉻含量太少或青銅取代易縮變形導致鎢棒不好取出! 還是選用標準焊接組件較佳!不然新手學習會因焊槍組件不良 導致保護氣流擾亂,鎢棒 或 焊道熔蝕氧化!總而言之 偷工減料的社外品太多! 焊接前檢查焊槍組件很簡單的方法就是,例如7號瓷杯 +2.4MM鎢棒!鎢棒突出10MM!氬氣後流時間加到7秒!試板起弧讓鎢棒加溫到紅!無風害下斷弧至保護氣後流停止!看看鎢棒有無氧化層發黑!若有的話 瓷杯 或是 銅束座十字出氣口太小 或 氬氣不純 問題!

[@johnjewell219]

Thankyou great tip

[@binhnguyenvo4385]

ありがとうございます。ノズルが小さいほどガスが少なく、短いタングステン (10mm) の方が良い結果が得られることを学びました。しかし、ワークの厚さに応じて電流をどのように調整すればよいのか非常にわかりません。

[@krzysztofmathews738]

Very interesting! Thank you!

[@brianswelding]

Great video but welding with rubber gloves??? 🤔

[@therealspixycat]

What kind of filter do you use in front of the camera? This video is of such a high quality!

[@변산갈매기]

그럼 같은 곳에 좁은 노즐에 가스양을 줄여서 하면 어떤가요. 용접기 없는 초초초보가 궁금해서 조심스럽게 여쭤 봅니다.

[@mudnducs]

Nice job!

[@ZlodieIzZaholustia]

Спасибо за знания! Давно заметил, что настройка газа очень важна!

[@willmacrae652]

Simple the best!

[@michaeljohn8842]

Hi great trick what amp and gas flow setting for car panel thickness of electro cup size will be great help

[@иваншурупов-м5ь]

Огромное спасибо 👍👍👍