Welding a 10" flange with a 10X6 concentric reducer

[@Mechanicalcircus]

5:42 Gus Blimp Cam

[@gustavojr841]

What is that man?

[@cwg1998]

Can you get footage on how you do your buttons at the end of your cap

[@gustavojr841]

I'll keep that in mind for next video 😉👍

[@jefclayton8341]

Just curious why you don’t fill and cap that with 1/4” 7018??

[@gustavojr841]

Good question.. With this company we're I'm at has a procedure that we need to follow.. and another thing.. weld a 1/4 rod with my SA-200 gasoline is to aggressive to the motor..

[@jefclayton8341]

Up here if it’s above ground we run 6010-bead 7018hr if it’s below we do that😊

[@TulanePass]

Can you tell us what youre settings amps are running at per every “pass” like root, hot, and fill, cap?

[@gustavojr841]

I'll probably have to buy one of those Multifunctional Clamp Meter to tell you exactly what's my amp settings on each pass.. I could tell you that I'm running 3rd gear and 65 for the root pass on my SA-200 but every machine sets differently..

[@casas489]

root pass en negativo?

[@gustavojr841]

No amigo.. eso es nomas con la pipa vieja y magnetizada..Aqui si tiene que soldar normal que es con el positivo en su mano y el negativo conectado al fierro.. si llegara a tener una situación que le quedo en un espacio demasiado grande en la firiada, ( como en un tie-end ) aga el root pass en negativo, eso lo ayudara a pegar los bevels mucho mas fácil.. ((Ojo)) nadamas que no lo vea un inspector por que es ilegal soldar en negativo..

[@casas489]

gracias , eres un excelente soldador !@@gustavojr841

[@7kiotti4]

Is this considered pipefitting/welding?

[@gustavojr841]

Yes.. both, pipefitting and welding.. Some companies provide pipe fritters, and they are in charge of taking measurements, cut pipe, cleaning the bevel, and fitting process for the welder, in another word the welder just welds, know.. in my case we (welders) have to do everything, take measurements, cut pipe, clean the bevel, fit our own pipe and weld it..

[@colindstark]

Where’d you get that hood

[@gustavojr841]

I only bought the carbon fiber and I fabricated the wood to fit this big lens

[@colindstark]

@@gustavojr841 you should do a tutorial on that

[@adamabarquez8257]

Hey brotha, what are you recording with? A go pro?

[@gustavojr841]

I'm using a DJI Osmo Pocket 3

[@paulusmarc]

Bon Boulo😆😆👍👍

[@michaelshortridge6379]

Don't forget to 2-hole it. 😂😂😂

[@gustavojr841]

😂😂😂👍