Welding up the rust holes - BMW E28 restoration

In this episode of the BMW E28 restoration, we're finishing the rust removal process
Subscribe:
/ @memphis5220
You can follow me on:
Instagram
memphis_you...
Twitter
/ memphis85158256
---- Music by ----
Epidemic Sound
www.epidemicsound.com
Contact me:
[e-mail]

[@theforestlizard223]

2:21 GOLD

[@theforestlizard223]

@cyka blyat Get out of here STALKER

[@M539Restorations]

Love seeing old bimmers brought back to life. Keep at it!

[@rkan2]

But you absolutely hate rust :D

[@misteralfredo]

I love these videos. It reminds me of the struggle I'm having restoring my 1983 BMW 533i. It's such a struggle, but I do it because there's nothing quite as beautiful as an 80's BMW.

[@sethstein9281]

I have the same car! Working on fixing it little by little, while also driving it regularly. Best of luck to you on your restoration project!

[@tobiasb6556]

1:29 a tip is to put a dishrag over the welding spot and kept it wet by spraying water on

[@EnriqueLopez-hb5jn]

That E-28 is looking better, once it is all painted it will look superb.

[@hangableautobulbbot]

Fair play man, always had a soft spot for the E28 and your videos are great. Big love from Ireland.

[@ejoautovideos]

Yes! A new Memphis video! 😁 Respect from another car KZbinr! 🤙😉

[@januariflickan1]

EJO Auto Videos love your videos man!

[@scaleartsg]

EJO Auto Videos subscribed!

[@jmdfamily1653]

Merry Christmas to you and your friend

[@paulus_1233]

Finally 😍👍!!!! I love your videos!!!!!

[@marino8446]

Finally a new video! I am following you on this journey from the start. I will fucking cry if I follow you along until you can drive this car as your daily! 💯 Don't you dare stop making content!

[@saimk4239]

Im loving this restoration so far, excited for the upcoming episodes

[@markstem4682]

I m watched all your videos end I m waiting for next . Happy New year thank for you

[@DrDevos]

Zo duidelijk een Belg heh,, Keep it up! Following from Australia

[@cleanman5685]

You guys have good hand. Good job. Don't forget. Safety first 👍🏻

[@gar4o555]

Great series! Inspiring me to continue work on my very own rust bucket. Keep it up!

[@berkates3415]

i really missed your videos, but totally get that. school and stuff... really enjoy your work on that beautiful E28. Cant wait to see more videos. Keep going man

[@scrotube]

I'm enjoying this series a lot. It also makes me a little ashamed because I always say, "I don't have enough room in my garage." Since I've got a couple extra feet compared to you, I guess I can't complain. I guess I'll start restoring the parts I've already taken off so they look freshened up.

[@paulpateman3968]

Loving this channel can’t wait 😊 to see the E28 fully restored more videos please 😎

[@G4meBust3rLP]

Looking forward to see the next episodes. Beautiful car!

[@mato1943]

It is so funny to me seeing allEU youtubers use Lidl brand tools no matter the country :D :D Lidl FTW ! honestly its pretty good considering its mostly made in China

[@egzonmjeku109]

Matej Šoky So what is wrong with lidl brand tools? Its just a hobby not a professional

[@jasonb23]

Nothing wrong he says FTW learn to rear

[@zlanath]

most of the lidl tools i have say Made in Germany, afaik they are made by Einhell

[@imnota]

@@zlanath Yep had a parkside sander fail on me, warranty covered it and sent me a new one, which was the similar model but from einhell lol

[@MrHuismeester]

Knap stukje laswerk mannen !!! Vond jullie tapijt "oplossing "geniaal: gewoon het mes erin !

[@yobaz_bukucu]

Good job bro! Respect from Turkey 🤘

[@Nightmare-qj9eg]

Respect from lebanon always watching you bro nice work hope you to make a vlog every week good luck peace

[@karlhalvars218]

Man i have been waiting for this!

[@MK-wx7uf]

Quick tip, before even putting filler on it you should spray it with a zinc coating, works as primer and excellent rust protection. Love the videos

[@matthewbell1968]

Cracking video Memphis of a quite beautiful car. Keep up the great work and we all look forward to the next video - hopefully soon! Have a Happy Christmas!

[@michaeltutty1540]

Great job, Memphis. Lovely to see the old car getting love. One thing I have found with body filler is that with the first coat, especially, a quick way to get the contours close to right is with a wood rasp. It is surprising how well it works.

[@KostasStergio]

Nice job brother!! Keep going

[@driftboi3989]

simple and clean job ❤

[@MarcFauntleroy]

Good job, wonderful car!

[@MrMCChan]

Nice work friend!!

[@stigsmauritiancousin671]

I saw in another video that the e34 brake rotors and calipers bolt on to the e28. Awaiting more videos. Subscribed!

[@peterking2561]

Let’s go man you’re getting those subs! Keep it up

[@sethstein9281]

Love seeing the e28 content. I have a beat up '83 BMW 533i that I'm trying to fix as much as possible with it also being my daily car. Looking forward to the next video!

[@jac120469]

Nice job man!

[@usernaame316]

thank you Elias, very cool.

[@jussiketels151]

Great job and cool 😎 video!

[@punapuuu]

Hey man. I really love you channel. Please, make more technical videos. I own a 1997 BMW E36 and she isn't in a good condition. So i can learn something with your videos :) Thanks for your job !

[@achile4669]

Found your channel two days ago, i didn’t have to watch one video through to start loving your content. If I could I would subscribe again Xd. Keep it up man

[@scotte3698]

Such a cool car

[@VLAD_YR_SI]

Greetings from Russia. I like to watch your videos👍🤝

[@FatCapPressure]

Good job! keep it up man :)

[@luivill7103]

🇲🇽 I'm from México, I like to the video! Muy chingones👌✌️

[@B1911k]

Great job👍🏼👍🏼

[@d3ja527]

NEW EPISODE🔥🔥👌 respect from Serbia bro😀

[@AnonymousCaveman]

Nice man I really look forward to the next part :)

[@mattiel9156]

Great job mate

[@younesel]

Always work the holes with a clean tip 👌

[@matty5057]

Merry Christmas Memphis!

[@rubenvanroy5593]

super video elke keer 😍

[@RetrocarStyle]

Is there any reason you chose not to use etch primer or epoxy primer over the bare metal??? Etch primer works really well on bare metal surfaces to prevent rust.

[@rkan2]

I mean... This video clearly shows they like welding :Dd

[@totoriina5005]

Well done guys Greetings from Bosnia

[@elmasmelih]

Cheers from Turkey mate keep up the good work.

[@elmasmelih]

but before montaging the interiors, you should've applied some sound dampering

[@elmasmelih]

kzbin.info/www/bejne/op_Igappar-fsNk

[@slehpi]

finally a new video

[@nataliabazile4002]

Cuanta dedicación.... Éxitos

[@philipp8636]

Love it :)

[@Net-Ne-Negatyvas]

Hey. I wached a few videos of this bmw and i have to say that i like what ur doing but in the same time i would like to point a few mistakes that u might did so you can still repair them if u think that my advice is worth of your atention. 1 of all you have to spray a base coat of acid primer, then a coat of akrill primer, and only then you can put a seam sealer and anticorrosove material on top of it. Acid primer does react with epoxy primer or pain so be sure su use akrill primer on top of it. Another thing that i would like to suggest for you is that you should remove your interior all over again and take off a sound deadening material becouse im basically sure that ur going to find rust there. And ofcourse ur gonna find rust everywhere where brackets are spotwelded and is a contact of 2 metals. Over all I like a fact that ur gonna save this bmw from death. By the way if u are not sure about what i said u can check out my project in my instagram: old_cars_have_soul

[@Sruciok]

By the way bare metal plus putty isnt a good solution.

[@quiksr20]

Great videos, Have to do some rust repair on my E36 soon and now I wanna go in the garage and start hahah..

[@Ruslanurie]

Funny) I gonna do the same things with my e28 next summer.

[@jamesvdd8583]

Goeie vids man

[@Supercarlsunday]

Good video! Subscribed! You should see the state of the E30 I'm restoring. Had to put an arch in that, weld up the battery tray area, i have the dash out.. The heater matrix is also shot.. Done the head gasket! Its never ending lol

[@Oberkommando]

Ugh I love cars but I hate welding. Unfortunately I will have to weld quite a few rust-holes over the holidays :( Great video though

[@Earllons]

Dear friend you must use sand machine for the paint on your car and will paint it again. Sorry I m from Russia and cant write well on your language.

[@paulwisdom5383]

Fam your face at 4:00 screams you need sleep haha

[@memphis5220]

Haha yeah...

[@Earllons]

I wish you good luck

[@jonasrosner246]

Ty.

[@hoaxerable]

Which welder do you guys use?

[@EngineeringNibbles]

I'm very interested on where your friend got his gas! I got a welder and can't seem to find a Belgian place to get argon cheaply

[@bushvalk2008]

You don't need argon. For Mig welding You can use a mixture carbon dioxide with argon. Much cheaper and still good for welding :)

[@caius_caligula]

Next time, remember to paint the inside of the welded metal in the foot compartment. I once had water in there in my e34 and these spots rusted to hell from the inside out.

[@memphis5220]

I painted the welded area from the inside before i put the carpet in

[@petrasarcevic1770]

dobro se sitio objavit video

[@manuelleclerc5601]

As a guy wanting to get his first project car what places/sites would you advise ? What are the alternatives for craigslist and copart around here in Belgium ?

[@firsttodie7013]

Don't welds from inside need to be spayed with primer or something ? So they dont catch rust easyly ? Just asking, i dont know how it works. Thx for new video, love the e28 :)

[@memphis5220]

I painted those but didnt film it

[@paulvarrieur976]

What about jacking pad replacement?

[@Alexdechoc]

Hello, I'm having an old e28 as well (525i from 1986) and I'm having issues with the windows and the trunk joints; water can pass through ! Do you know any place I could find this ? I'm living in Belgium as well

[@user-bn5lw2zu3z]

it looks like insides of ur sills needed to be welded too,or atleats should have grinded as much rust off and protect it,without that ur car gonna rust up pretty soon again,depends if u drive on salty roads or if u keep it in garage,but when u doing something like that,would be wiser to do it properly

[@RobiinnNL]

is de kleur achatgrau ? volgens mij heb ik nog wat roestvrije deuren en een achterklep in deze kleur, alleen volgens mij geen bestuurdersdeur meer.

[@memphis5220]

Nee, het is Delphin Metallic

[@Andrew3run]

От России, лайк))

[@Orc-nr7zn]

Упор под домкрат не приварил , переделывайте !))

[@user-nx5xt2ov3z]

У вас авто в отличном состоянии, у меня всё гораздо веселее, хотя цвет такой же и 1982 год выпуска у вас 83, на моей пихло m30 b35 :)))))

[@claydis]

How much did you paid for the car ?

[@memphis5220]

I actually got it for free from someone i knew

[@alexw1875]

Now that you own a bimmer, you can pick up girls.... just joking hahahahaha

[@MrKarahanov]

I have e28, and I am enjoying every episode of this series. I have 99% completed my project e28 so I want to sell it...If anyone has a interest in swapped M52 e28 please contact me...

[@darthvader192837465]

Hey, can you post the name of the song at 4:44 please, there are hundreds of songs on the Epidemic website and I can't find the song you used.

[@memphis5220]

The space mechanic - dvine

[@darthvader192837465]

@@memphis5220 Thanks You! Such cool track

[@PHATJANUS]

#SaveABMW

[@KanoValentine]

2:21 HAH

[@pangrac1]

Parkside save the world. 😁

[@perchancethishandleiswens]

2:20 "After Elias cleans his tip, he can work on other holes." HMMM

[@saimone1981]

Nice job, but first epoxy primer, then You should use car filler.

[@disastra_tds]

Nope, that is a false fact and a myth, actually epoxy primer reduces the fillers effectivity

[@saimone1981]

@@disastra_tds show me that You have right. Are You profesional car painter?

[@disastra_tds]

@@saimone1981 i am not. But the can with the car filler i use literally says "dont use epoxy primer underneath the filler, you will make the filler not work properly and in worse case falling out the spot."

[@becomematrix]

Ik zou eerst een goede etch/epoxy primer gebruikt hebben alvorens de filler aangebracht.

[@jonweaver2410]

Swapped the engine.

[@dillanmistry]

It's my birthday guys

[@memphis5220]

Happy birthday!

[@dillanmistry]

Memphis sorry bro it was funny sarcasm I'm straight😂👍

[@rj6110]

mine is on monday

[@alexw1875]

Are you a college student or are you finishing high school?

[@memphis5220]

College

[@skreech01]

2:20 KEKW cleans his tip or his pipe

[@HunterTheCatTV]

at least you should be wearing a welding gloves while you are using CO2 technique

[@korsakdaniel2068]

First :D