Boiler Tube Welding | Boilermakers TIG Welding for Power Plants

Abe got with Xavier a former student of SCWA to to show you how they weld a tube panel! Here is some boilermaker welding coming at you! They will showcase the buddy welding system which is one guy feeding the wire while the other welder manipulates the torch. Team work!

[@weldtube]

👇WeldTube Store👇 www.weldlife.com

[@top6ear]

Are the lenses on these traditional style helmets better than some of the more advanced newer helmets I'm trying to figure out why a lot of professionals wear the oldest style?

[@trevorleader3690]

Great video. Rough caps though. Boilermakers are absolutely elite welders.

[@microgamer54]

Boilermakers are bolt up hands ✋️

[@trevorleader3690]

Obviously do t know boilermakers. Try triple nickel if it’s talent you seek.

[@parishjohnson7301]

I’m a union hand from the West Coast. Love the video !!!! Another way we do those waterwall tubes is we put in a tig root and then go straight to stick. “Buddy” weldin. Handing the arc at the membrane side. Keep up the good work on this awesome channel !!!!!

[@tynstaci]

I welded with some guys from local 72 in Atlanta. I wasn't a union welder. I ended up fixing their welds. Being a "union" guy doesn't mean anything. It means you give money to your union and they donate your "union" money to democratic politicians. I watched those guys asking all the hands for money because a 40 year "union" hand died and the union wasn't helping his family. I also watched a 36 year union hand retire and the stewards and union reps didn't even show up to congratulate the guy. It's disgusting what I saw the "unions" do. No thanks

[@STUPIDstutz5]

@@tynstaci I agree 100% but there a good place to start and because of here schooling and the experience you could gain. You can make a lot more money non union buys it’s not a bad ideal to do there apprenticeship then get out.

[@kevtech733]

Working both Union and None Union for over 30 years. There is good and bad welders in both. But the nice things about working in the union environment is you have a place to practice and test for no cost, your benefits are paid for 100% by the employer, employers pay into your retirement (Pension)package so much per hour, the wages and standards are agreed and stay the same for entire time on the Union agreement. As well as all members pay a death assessment if you die and is given to the Beneficiaries. While working none union you get what they offer and can change when ever employer wants to change your wages, benefits if there is any and standards other than the legal standards they have to follow. I prefer working for a union Environment and there is way more benefits for the worker and my time is compensated better. At least these are some examples of my experiences.

[@jeepwk6.5L]

@@tynstaci lol u sound uneducated and any union south of the mason dixon isn’t typically a true union due to the fact most of them are book buyers who never went through the apprenticeship. Most where non union and tested in. Come up north and you won’t be fixing my unions shit I’ll tell you that lol. I’ve worked with plenty of 72 hands. All of them but 2 learned from a trade school then jumped ship. Sad times.

[@征魏-x2l]

你好，我是一名焊接锅炉水冷壁左右手的焊工，我可以跟着你们公司干焊接吧？谢谢，

[@klaychesham1791]

Love this video. You are the man Abe, and Xavier is a testament to the work you guys do at south coast. Great work fellas.

[@abrahamjasmine]

Thanks bro!!

[@MrBlackseth296]

Such a great video! I like the quiet weld time filled with ghosty voice over

[@odinsbeard1117]

Dude this is one of the coolest videos I’ve seen you guys do!! I wish my school did half of the types of welding that you do. I feel like I would enjoy this type of learning experience

[@kimchiwelder8410]

This is 🔥Kimchi welder🔥 Thank you for allowing me to see tube welding that can't be reached unless in Weldtube!👍👍👍

[@johnvillanueva1240]

Proud to be a boilermaker union member

[@GTStabbin]

Hey congrats I’ll be joining soon hopefully

[@Slo6.7]

Great video! Abraham is one of my favorites to watch!

[@ericnelson8108]

Should of picked up some 3/32 7018 after the Tig root pass and learn to buddy weld learn to pick up the arc up from your partner from the other side of the tube panel, continue the weld on your side and hand off the arc to you partner, clean your weld and get a rod ready to pick up the arc from your partner and repeat / slag welding makes a beautiful weld on the cap if you're welding hot enough especially on stainless stick and don't forget the sponge after milling the tubes !!!!! Also the piece that replaces a blowout is called a Dutchman , and yes I'm a union boilermaker 154 strong!!!

[@daveuhl3392]

Local 101 here!!

[@ericnelson8108]

@Shane Johnson what local you out of ?

[@ericnelson8108]

@Shane Johnson I work building and repairing tanks, 98% of the time jj White , matrix , and witherup Is who I work for i worked out of the hall when tanking was slow but after all the coal burners got shut down or converted to gas there's more people on the list waiting for work so it's harder to get work out of the hall I still keep up my common arc up to date ever 6 months it would suck to lose 30 contractors

[@ericnelson8108]

@Shane Johnson yes sir I am goats on the floor and 3:00 on the shell

[@eloyceja6132]

Im applying too the boilermakers union Thursday 🙏 hopefully we go back to our normal lives already. Great video like always guys 💯🔥👨‍🏭

[@ttownboy1]

What local you join

[@stefanlawver5755]

Me as a boilermaker screaming at my phone.. ITS NOT PIPE ITS TUBES!!!

[@raylegg2269]

Pipe has as seam. Tube doesn't. Split the membrane first. Millin motor. Then the grasshopper. It also looks like an element not the water wall. Prep work is ugly as well 😪.

[@lance3883]

Typical

[@lance3883]

There's seamless pipe dipshit

[@tudyk21]

​@@raylegg2269, I was wondering the difference.

[@quinnhowlett697]

Union Boilermaker welder apprentice here, local 128. That was a great video, thank you for that. I haven’t started tig welding yet but will definitely be watching this video again when I get into it

[@daveuhl3392]

Congrats on being an apprentice, but please remember that being a journeyman Boilermaker means you can do any and all of our trade. In over 20 years, I’ve never seen anyone’s union book say “Boilermaker Welder”. They say Journeyman once you bust out. Too many guys think that they are “welders only” and most are only rod burners, not a true welder and there’s a lot of work that has to be done prior to most the welding, such as demo or hanging new panels. Not trying to say anything bad, just trying to change the mindset of some of the younger generation. We need everyone that cares and wants to learn a good trade. I’m a 2nd generation, graduate apprentice out of Local 101. Went to the apprenticeship competition and now I’m a superintendent for a good sized Union Contractor. Just please don’t get stuck focusing on welding. Yes it’s a big part of our trade, but it’s only part of the skill set you will have after you bust out of the apprenticeship.

[@daveuhl3392]

Worked with some guys out of Local 359 when I was an apprentice. Great guys and willing to teach you everything they knew if you were willing to learn. Get them hours and be safe out there.

[@quinnhowlett697]

Dave Uhl thanks for the advice. I say I’m a boilermaker welder because that’s what I am in the union... I understand that I will learn Mechanic work and that I will do mechanic work. However, in the union I am a PSW (Pressure system welder) and I am going through the PSW program that was introduced to the union around 10 years ago. So when I’m a journeyman I will be a journeyman PSW. I am also on the welders list for dispatch. When a contractor wants welders then they call off the welders list. I have done mechanic work and I enjoy the mechanic work as well. However I am considered a welder

[@daveuhl3392]

Quinn Howlett when finished with your apprenticeship, you will be a red seal certified journeyperson Boilermaker. Currently you’re a Boilermaker Apprentice, nothing more and nothing less, unless you’re trying to take a welding test for your hall and then plan on buying your book, in which case you wouldn’t be an apprentice at all. But again, best wishes and get out there and make the Boilermakers Union proud by being the best you always can be.

[@quinnhowlett697]

Dave Uhl currently I am a second year Boilermaker PSW apprentice... I was hired into the union as a welder, in a separate welding program. I do not go through the same schooling as the mechanics... I will still be getting my red seal journeyman certification at the end of my apprenticeship, but I will still be a Boilermaker PSW, which is a Boilermaker Welder, getting dispatched from the welders list... I know what I am dude lol

[@juanescutia9959]

Good video! I’ve been working in the boilers since i was 18, we do it a little different and a lot easier but I know it can be done different ways, great videos !

[@blaivan89]

how u mean lot easier tho? every time i do or watch thise boilers seems hard anyway u do it

[@nolankirkwood9655]

The only place you need to feed wire to each other is on the sides. That’s a luxury that you can only do if you’re not on a waterfall with a bad draft. Otherwise you just gotta reach back in there and get it. You can burn the bevel off with your arc (if the gap is tight) and feed your wire on the inside to give you more room.

[@larrymasterspowerbuildingc4477]

Thank you. I’m applying for boilermaking right now. Beautiful video that gives me Confidence!👍🏿💪🏿

[@andreww.4892]

Did you get in the boilermakers union?

[@征魏-x2l]

我可以加入吧，我也是一名锅炉管道焊接人员

[@RickAShriver]

Thank YOU for YOUR time!!!

[@RickAShriver]

@@weldtube Just like ART WORK!!!

[@djnonya9570]

Usually your partner starts on one side and welds towards you. Then takes over feeding and welding until he reaches the other side where you feed him again. And 90% of the time it's root pass gtaw then swap to smaw for fill and cap. The smaw is the actual "buddy welding".

[@chrispretorius3158]

I work on a power station in operating, I have huge respect for the people that repair tube leaks.

[@marioultimateart90]

So Relaxing and informative keep up the great work Weldtube

[@redrelder2603]

Good video for anyone that wants to be a boilermaker tube welder but y’all got to keep in mind this is just a waterfall simulation and that is the easiest it’ll ever be for ya on a outage. 🤘

[@stevencotta6676]

Without a doubt bud that aint no 6 deep in the mirror economizer weld

[@redrelder2603]

Steven Cotta gata b boofin🤫🤙 hope ur doing well brother

[@jameshobson1325]

Only boiler RAT....

[@edohgache]

Please, What type of test should I be ready to take to be a boiler maker welder?

[@LeadRakFPS]

@@edohgache 2” 6G heavy wall tube test. TIG root pass, no TIG hot pass, switch to SMAW ( preferably 3/32) for fill and cap. No grinder for the test. File, chipping hammer and wire hand brush only. Good luck.

[@donleejr7624]

THANK BROTHER I"M A TUB WELDER,PIPE WELDER KEEP UP THE GOOD WORK!!

[@mikeundereood1071]

BOILERMAKERS. THE REAL BOYS UNDER THE HOOD 🇺🇲🇺🇲🇪🇬🇨🇦🇺🇸🇺🇸

[@daniellucas7715]

You guys always have excellent videos!!😎😎

[@stevencotta6676]

Lets see some superheats. Mirror welding

[@daveuhl3392]

Good video, but usually buddy welding in a boiler is done on the cap with stick. 1 guy fires up and goes to the membrane and then the other guy takes the arc to his rod and does his half and then the 1st guy picks him up and finishes the pass. All the way around and never breaking arc.

[@danbradford5553]

On wall panels it is usually stick cap but individual pups it's usually tig all the way through

[@daveuhl3392]

Dan Bradford555 In my area, regardless if it’s the wall, a superheat panel or screen tubes, it’s a stick cap. Back pass or econo, then yes, TIG all the way out.

[@kevinbloxom8013]

If you are fighting a draft on the water wall you can also stick the hot pass.

[@redrelder2603]

We call passing the arc to each other hot pick ups and the guy picking the arc up had to chip the slag off from the start before he drops hood to pick up arc.

[@jwboilermaker]

And true buddy welding is done off the same machine with a Y for the stingers.

[@jakemoore-dm8jw]

Just getting started on the waterwall, those tangents are tricky. Boilermakers Local 128 baby!!

[@Ruben901]

Started from the boiler now were here 😜😜😜

[@Ruben901]

@@weldtube 👍

[@jamesgreer1046]

3/32 gap 1/8 wire about 135 amps. Faster, but alot less forgiving. Nice video. Not many people doing boiler tube videos

[@-n_hunter8403]

Yes sir the way we do it too..tighter gap so less to fill and cap..much quicker..I personally use the back and forth technique I picked up from Jody on welding tips and tricks.

[@fraggingremlin3868]

Could you guys do a video about how you pick your tig setup? Like how do you decide what filler wire diameter and cup size to use for different thicknesses or just something where maybe you need a longer stickout to reach. Love the vids and have learned a lot from you guys 👍

[@JungleConflict]

I have been on plenty of tube jobs and have never done this. It’s always been partner fills you wire for the tacks then you weld a quarter of the tube with your right hand then do the other quarter with your left. Then you pass the torch to your buddy and he does this same. And this is on black liquor boilers.... (and even power house) and if you know anything about that type (black liquor) you know what could go wrong with those hahah

[@JungleConflict]

And also forget about the burr grinder, you only use that if you absolutely need it. And if you know how to weld you will almost never need it. (Most companies will give you a couple extra $$ if you do it fast so don’t dick around) And most places never have you TIG the cap unless it’s a repair. It’s almost always 7018 for the cap....

[@Roncass4]

By turning your torch out or down slightly at stop, it prevents that pop that can cause a fisheye and does not leave that glob to start off again and doesn’t require a burring tool. I hate those burr’s down my neck and in my shirt!

[@melvinalex330]

Tube is seamless and measured od. Pipe can have a seam but also can be seamless but is always measured id at 12” and under

[@tonyraymond3465]

Boilermaker local 584 ✌️ good stuff guys

[@egoydro8909]

why do they put their tacks at the side and not at the front? i'm a boiler welder myself but we always put our tacks at the front and we always do a bridge tacks... we rarely do that buddy feeding unless there's no way you can reach the side, and we usually weld a much tighter gaps than that. we (my partner) always do our own tie-in at front. whoever finish his tie-in first his partner will look his tie-in if it's good before he do his own tie-in. I'm just curious to know why they do like that. cheers

[@coreykelly6641]

Just wondering why you are tiging it all the way out. I've always tiged the root and hot pass then buddy whipped it out with stick

[@seanpoore500]

It all depends on the welding procedure. It could be tig root 7018 hot pass n cap. Or it could be tig all the way out.

[@wecx2375]

For the money.

[@dougbelasco5586]

very good trade the boilermaker union works in many industries

[@williebateman3613]

Thanks brothers 🤛🏾

[@mattwilliams3797]

I’m a boilermaker out of local 85 there a lot easier way to buddy weld then the way you guys doing it first one idk why your tigging it all the way out grab a buddy whip and stick weld it can crank out Aton of tubes a night and when your on the side of the tube where the membrane would be u can have your partner feed you the wife instead of holding ur wire at the top joint

[@brianewynkwardt4986]

This is where u separate the boys from the men👌🏽left and right hand welder👊🏼

[@olddawgdreaming5715]

👍👍 thanks for sharing your videos and jobs.

[@rhythmm860818]

Love the setup brilliant

[@sanzephyr7271]

Interesting welding technique

[@christiandiaz8333]

yall forgot to mention the specs of the smaller conversion of the head on the tig rig if im not mistaken it looks smaller

[@jwboilermaker]

They’re using a 9FV head. You don’t want a big rig in there because you need to be able to see around the cup at times

[@eridu77]

With a stickout that much a jumbo cup would serve you better to keep down porosity and improve the surface oxidation. There's also Pyrex cups to see through. A mini rig (WP-9FV) is rated for 125amps. If cheaply made they burn up often. I just don't see the need to have a light duty rig rig to do that, there's nothing in your way to restrict the movement of the head so why not get a WP-17H with a jumbo stubby and weld in it's capacity?

[@joselitoresco5369]

Way back 1990 quazvin iran boiler power plant project.we are using gtaw smaw process for 2 inch diameter pipe.especialy in a 45 degree position.

[@tanataotengahere5978]

Kaapai e hoa ma..mahi pera i te whare hiko.. (Huntly Power Station)..o muri atu.. Aotearoa..kia ora.. kaapai vid 👍

[@boroturkes7786]

Very nice work

[@davidwichert2315]

Glad to see something using tig something other than stick welding on pipe flanges or on a welding bed thats crude as a farmer built it , different from oil and gas welding for a living tig welding is were its at besides other ways to make a living living I a fithwheel trailer and going to job to job u know who u are !

[@ryanb1874]

Nice, boiler-buddies

[@ianjoseph145]

Great video thanks.

[@seandurler2467]

Boilermaker local 154 good job brothers

[@andrewgutierrez9]

For those that don’t know the difference between a tube and a pipe. Steam flows through a tube and shit flows down a pipe! 🤓

[@Posibrian]

Thats not necessary true. Steam flows through tubes and pipes, it is dependent on the package or prints as always.

[@andrewgutierrez9]

Brian B Boiermakers really only need to look at prints to see how the engineers f up.

[@fastmoneygod8676]

Not true, there’s boilers specifically called watertube boilers. The tubes are filled with water. So not necessarily just steam will be seen in tubes.

[@Roncass4]

@CalikuhL you are absolutely correct! Pipes are for conveying liquids and are not high-pressure tubes. Yes there is water in tubes but mostly steam and pressure. Pipes will explode under similar pressures.

[@davem3789]

Nice vide with good info.

[@tombrennan6312]

Old time boilermakers call it heli-arc, not tig. Tig is for making french fry machines.

[@madcapmagician6018]

looks like in the root you were using a lay wire method of filling the gap, id this correct, and when you guys are saying that you use a longer than "normal" stickout, what cfh do you set your gas on ? interesting video guys =) please keep them coming .

[@WELDERMADEHEADBANDS]

Cool video fellas

[@goldeneagle_wld245]

Very good tecnick back and fower exelent 👏👏👏

[@charlieboy501]

You guys are good

[@albertoledezma2745]

Wishing i lived in Houston to apply at SouthCoast

[@Ruben901]

For tig right? Cuz from your profile pic it looks like your a bad ass on stick 😜😜😜😜😜

[@albertoledezma2745]

Ruben Rios yes!! Haven’t gotten right on some tig welding

[@Ruben901]

@@albertoledezma2745 Where you reside at? And is there any work over there?

[@dominikschoenewald7676]

Great Job. Why American Welders never use GTAW with HF and down slope?

[@jordansantander6893]

Thank for this video

[@darealaa]

Put a wooden wedge in there and create more space

[@bienweiser]

The membrane between the tubes on either side of the tube that you're welding on prevents them from moving. If you're on a emergency outage the plant wants the boiler up as fast as possible. So they aren't going to want to take the time to remove and replace any extra membrane. We do use wedges to spread tubes in other areas though.

[@jamescosta1174]

Dude, Booming is the shit, traveling and moving in synch w/ the plants seeing country quickly, vacationing ...big fun

[@gregorymalchuk272]

I'm curious, what % of welds, after inspection, radiograph, pressure testing, end up being considered failed and have to be retouched or cut out and rewelded? Like what is the expected success/failire rate for a reasoanbly competent tube welder?

[@mattharper588]

I’m a retired Union Boilermaker and if you are having a hard time making welds that will pass inspection the contractor you are working for will pull your welding papers for that company and you will not be allowed to weld for them again until you can pass a welding test and re certify and they will probably let the Union hall know also they only want welders that are consistent and do not have any bad welds at all

[@samuelbell2390]

It depends. They want a 100% pass rate. They know that's impossible, but you better not be fucking up often. Its gotta be once in a blue moon. Also stuff thats gonna be QCed to hell is gonna get the best welders. If youre not the best you'll probably get moved to less demanding welds.

[@mattharper588]

@@samuelbell2390 on critical black liquor boilers it is 100% x ray so every weld has to pass inspection but on most coal fired boilers it is 10% x ray and if that doesn’t pass they will start x raying more until they find out what the problem is and correct it

[@jeffs.5882]

You can always tell a pipe weldee from a tube welder by the back cap

[@user-zr6gh7mb4y]

Don't do the weave on the fill pass. It takes to long and tends to undercut on the top. I've took a test for the power industry last year. It was a gap - 5/32 with a 3/ 32 filler ( the inspector was very strict with the gap and filler size, nothing more, nothing less) 120 for the root, 150 for the fill with 2 stringers , 150 for the first two stringers on cap , 125 - 135 for the last. The membrane ( distance between the pipes) was 3/8. Time limit - 60 minutes for two joints.

[@sohailumar2231]

Good job

[@djdave5629]

Waterwall best job on the boiler 🤟

[@mikeundereood1071]

BOILERMAKERS 13

[@akilprabhu]

Its been great to watch tech videos in social media. Could u pls anyone share the time required to weld 2inch tube by TIG.

[@Konigkev]

Thanks gents!

[@Peter.Lecomte]

Local 29. Usually, we feed each other on the sides, but weld our own sides ourselves. Buddy weld hot pick-up after a tig hot pass... Good video though.

[@MulyasugaraWeldingexperimen]

Good job bro..... 🥰

[@CRISELIPHASLEVI]

Muito show Mestre 👏👏👏📖📖📖☕🇧🇷

[@Kurst535]

It is not that easy and its way different in the field. Tangent waterwall tubes are what we have at our plant and very few boilermakers that come to our plant can handle it. When doing a repair many times you have to do everything from one side forcing internal welds and window closures. And TIG welding the root is out the window completely. Not even a micro torch can fit in the tubes. Should try it or find someone who can. Would definitely be an educational video for sure. Weld on brothers.

[@Roncass4]

Window welds our best when they’re confined to one or two tubes and they don’t want to pull the skin off the outside of the boiler.

[@Kurst535]

@@Roncass4 agreed, but many times they need the boiler back ASAP and the extra work and manpower needed for that isn't feasible. Its all about the bottom line with most companies u know.

[@Roncass4]

@@Kurst535 agreed. But they also realize that union Boilermakers are saving them hundreds of thousands of dollars per hour, to get it done, and then get away from it. Unions train very efficient Boilermakers, and the companies that realize that instead of using scab labor save them time and money as well.

[@Kurst535]

@@Roncass4 I'm union brother, UWUA 1-2, just not a boilermaker. Not sure if you experienced forced outages or how the grid works where your located but our company loses hundreds of thousands every hour the unit is forced offline. And not for nothing, you know as well as I do not all, but many unions milk jobs for days, they're not all trained the same. At our plant in the time they take to set up, build skyclimber, cut out and replace tube they're about 24 hours in. Us house guys get it done in a 8 hour shift.

[@Roncass4]

@@Kurst535 that’s not how I handled my job’s. You have to be somewhat of a diplomat between your men and the companies you work for. They expect professionals and that’s what I gave them. I would never put up with a slacker. A real boilermaker will take pride in his work and companies understand this. I have made welds in a boiler where I could not use my hood at all, only a welding lens because of the heat, steam and humidity. I put on a harness attached a retrieving rope ( just in case) and crawled in. I would weld until I couldn’t see, then wipe off my lens then burn some more rod. I will always believe in unions for all the right reasons.

[@masterperfect830]

Very good

[@hayyremz]

Dude! Where may I cop one of those avestruz buckets?

[@paulmorrey733]

Thanks

[@poisonedarrow1968]

At 12:49, you need to cover both bevels with your cap.

[@michaelbrignac9995]

Man y’all’s videos are so informative, I been a pipe welder for 21 years now, I would love to come visit y’all’s school and check it out, I’m from Louisiana let me know where y’all at and when I can come visit!

[@buddybell4426]

Nice job as always

[@scottfreeman1514]

Why did you not stick the cap

[@Gh3ttoAstronaut]

Bm 146 baby much love

[@larryenglish9292]

Why not run the fill and caps with you partner feed you the wire?

[@jesusrios7124]

Show this pipe line welders what a real welding is

[@felixpereira4876]

It's all welding my guy!

[@bobhaddick2127]

Kind of an Ignoarnt comment. As a Pipefitter Welder, We respect Boilermakers for what they go through, They do things we couldnt do and we do things they couldnt do, both trades are superior in their own way. At the end of the day, most Boilys become Pipefitters for better wages, cleaner work, or to work closer to home.

[@jamescosta1174]

As pipeliner, this is hats off, for me that is, tedious compared giant puddle flying down

[@jeepwk6.5L]

@@bobhaddick2127 man I worked on a pipefitter job (I’m a pf) and they had a bunch of pipeline guys helping man the job. We had to make 128 stainless tig repairs in the field

[@thejourneyman2043]

@@bobhaddick2127 name one thing a pipe welder can do that a tube welder can’t.

[@bonerDB]

5L is the best cup for welding it.

[@butters_]

What’s the purpose of buddy feeding??

[@DerrickFishes]

Do they typically have a machine with lift arc in the field when doing this or do you have to scratch start?

[@eridu77]

Most contractors rent Miller XMT or a Lincoln equivalent, which has lift arc, and can stick, then run a Suitcase for FCAW the membrane between tubes.

[@jwboilermaker]

Just stick with scratch start. Then you don’t have to worry if you have to switch polarity midstream. You won’t have to climb out of the hole

[@maryparvin3041]

i worked in a job shop in memphis back in the early 60s,had to build some boiler tubes and welded them with a torch and coat hanger wires

[@Roncass4]

My father was a Boilermakers as well as me and he told me a similar story about coat hangers. I always thought it was just his way of saying that we can do it, no matter what it takes. My favorite is; “I have been doing so much, for so long, with so little, that I’m now qualified to do anything, with nothing!”

[@IndahKita]

Is it GTAW?

[@davidbabin1287]

Is a pressure test applied when you do a repair on boiler pipe. Or a UT...??! Also I thought those welds came out pretty good considering the restrictions... good job partnering that weld. That can’t be easy...

[@5spdiroc]

they usually xray 100% or at least a percentage but they hydro the boiler afterwards anyways so theyll find any leak

[@Roncass4]

I don’t think they will put the squeeze on tubes in a class. Mostly visual instruction. Maybe they could cut coupons for bind-test. Non-destructive such as x-ray ( not practical in class situations for obvious reasons.)

[@LeadRakFPS]

*Boiler Tubes. Not pipes.

[@ziggyc4474]

How is tbe weekly pay for a journey with great companies?

[@mattharper588]

2:45 it’s called a tube not a pipe

[@EddieVBlueIsland]

Schedule 40 and greater is pipe.

[@henryrollins9177]

@@EddieVBlueIsland Indeed..!

[@keithmartinez07]

EddieVBlueIsland incorrect

[@mattharper588]

@@EddieVBlueIsland tell that to a Boilermaker

[@miguelbravo4666]

Good luck to myself 😂😂😂

[@kabihog5789]

I noticed how you guys fit up the tubes....we use 2” angle with a welded nut and a bolt on one side and L shape plate welded on the other....those L shape will hook on the fins...(those longitudinal bar mostly 1/4 “ thick that’s welded in between the tubes)...you’ll figure it out which end you have to put it looking at the orientation of the tube,..that’s for up and down alignment,side to side...we use wedge..On welding, we supply filler on the other welder just on the corner, once able we supply ourselves....one thing about boilermaker you should be able to weld left and right...it gets easier.....but if you don’t know how to use your inferior hand,you’re bound to call a lot of saints in the process. I could not stand those soot when it turned to a slimy stuff...makes my skin dark and greenish..I’ll get allergic reaction to it...although boiler job is exciting I never miss it because of those

[@mattharper588]

Where is there a corner on a round tube

[@LeadRakFPS]

@@mattharper588 he’s obviously talking about the sides. I’m a Boilermaker. We only feed wire to our partner on the sides (in between the tubes), then once your welded out from the sides you feed wire yourself.

[@mattharper588]

@@LeadRakFPS I have no idea why you are responding to me,I’m a retired Union Boilermaker and we weld tube’s exactly how you explained you must have me confused with someone else’s comment keep the hood down and get after that money $$$

[@LeadRakFPS]

@matt harper 🤣 Because you were asking, "Where is there a corner on a round tube?" I was just pointing out that they were clearly talking about the sides when they said, "corner".

[@ielevate2084]

Educated welders but all i heard was um every 5 seconds great video though good work!

[@josephkingston9252]

Warning do not join the boiler makers union as a pipe welder because all you're gonna be doing is usually welding tube when you seldom get to weld, and very seldom do you ever get to weld, you do more bull gang work then anything else and the bullgang terminology is just a fancy term regarding to hard back breaking labor , back breaking labor, that's right, when you're a boiler maker you usually have to wear paper suits covering all of your body you have to wear a special mask cause you're around poisonous gasses And all of that's very encumbersome and the only pipe you get to Weld is tube, but that's very seldom ,mostly most boiler maker work ,even if you're are a welder ,most boiler maker work is hard Back breaking labor picking up, lifting tieing knots, transporting stuff , cleaning out air houses it looks like whatever they call them I've been with the boiler makers before and I know what I'm talking about you'd rather join the steamfitters Union or the pipe fitters Union but never the boiler makers Union

[@BB-yi3lr]

If you were really in the boilermakers union at all you would know that boilermaker is one word not two

[@kwesimcmaster8307]

Correct . You can also join the pipefitter union .

[@belindavidal4763]

Cap didnt look bad at all bro!

[@Lucifer.Morningstar.n1663r]

Free hand

[@lebroncan2018]

It’s called free hand I can do both free hand and walk the cup

[@tahirhussain9486]

I learne some things thank

[@josephkingston9252]

All welders will eventually learn possibly someday that the only way you really going to ever get to really enjoy your craft of welding is to have your own shop and be in business for yourself because one of the worst things about the field of welding are the other people that you have to weld with and weld around , it's a hard crew to get along with and no matter what you do or how much you do you never can satisfy the supervisor it seems like but if you got your own shop you can weld according to your own pace and you can build and weld whatever you want. I've noticed on jobs that I've been on offshore and inland before I retired it was always some other welder that was knifing me in the back out of jealousy. I hate to say it but most welders are alchoholics, and that reason alone if no other makes him a hard bunch to work with. Go to the channel of moseseseseses, type in: $3000.00 a day welding in your own back yard.