WELL...We Found BIG Problems with Wrecked Ford Raptor

[@FoodSlap]

We NEED more Westen vlogs, atleast guaranteed once a week maybe 2?! Pleaseeeee

[@mdx_vr]

Do that please

[@russanderson7859]

I 3 rd that

[@mattijsbusschers1799]

4 👍🏼🤣

[@zachariahpiper4284]

5th that @westin

[@AutoAuctionRebuilds]

Man yall put in some major work in this video! Thank you for excellent content!!

[@dapeman77]

Hey Randy, no refills here. Hopefully when you have the workshop built at AARHeadquarters you too can start rebuilding again.....

[@Rosso_Dabosso]

Dom really is just Bobby Hill all grown up.

[@rubber_duckie1536]

Damn it Bobby

[@King_Springmeyer]

@@rubber_duckie1536 read that in his voice

[@rubber_duckie1536]

@@King_Springmeyer lol

[@jakegianattasio3037]

His shirt said relax dip enjoy 😂😂

[@kevinparker4148]

Keep up the good work brother!!

[@davecruzen9352]

Really enjoy watching you and your brother working together. Your brother is a wealth of knowledge. You both are unstoppable when together. Really impressed that O'Reilly came over to help out. You guys arent afraid of stuff you eventually find wrong. You see a problem you attack it. You guys are a great joy to watch while the rest of us, the country, is locked down. Keep on plodding along. It's great you are able to do all that you do. Looking forward to more of your videos. Stay safe, stay healthy. Until then my "brothers". Thanks!

[@keejinjohanson]

“We’re short on lawn chairs to watch the tornado” As a midwestern dude I feel that one.

[@Djwally13]

I spit my lunch out when You asked Dom if he used the crane to put his girlfriend to bed! 🤣

[@vincem5]

same haha

[@jasontaylor7419]

And his next sentence was “ I just pulled on that forever”

[@Mr120volts]

LOL there are many big ass cracks in this video

[@chrisjennings8573]

Lol

[@americanpatriot3638]

Ya i saw one at 15:40 that should be fixed...hahaha

[@johnnydngrs]

saw another at 10:20

[@larrybe2900]

@@johnnydngrs Never knew cracks were worthy of a time stamp. ;)

[@Dizzz127]

Westen deserves more views, taking trucks apart and putting them back together piece by piece is just something else.

[@cassiuspuckett8789]

To have cracked that differential like that, the truck must've be traveling at a very high rate of speed. I'm kinda surprised you were able to find another differential housing so quickly for the truck. Nice video Weston......

[@CatchMeOffroad]

All Raptors come stock with 4.10 gears, front and rear. The gen1 and gen2 front differentials are the same also. So you can literally grab any raptor front diff and it would work. Only option is the Torsen front diff, which is nice but not completely necessary.

[@gliderider7077]

Now that’s a true “frame off” restoration

[@nightstalker824]

Super bad ass, but usually the parts are cleaned on a frame off...

[@gliderider7077]

night stalker yep that drove me a little crazy too!

[@Terk131]

Maybe we are just OCD LOL, I would have had everything cleaned and painted and sealed esp since I am in the salt loving North East.

[@19CD91]

"allz we gotta do is rebuild literally everything. AYYY whats the O'rielys part number for an entire raptor?"

[@iowafarmhandonajohndeere5902]

We know it will be expertly cataloged

[@DaveJohnsonad5nm]

I'm willing to bet when it's all said and done he has only about 1/2 the blue book value invested. A pretty good profit margin if he sells it.

[@danrowley6934]

What a deal. You get the O'Reilly's guy help you build your ride.

[@officialyoutubecommentator4357]

@@DaveJohnsonad5nm No, not really.

[@quentinblack287]

Finally another video quarantine has got me needing content 😂😂

[@TomsChevelle]

Nice work, wish I had a shop that huge. Enjoy the videos guys, keep up the good work. No drama, no cursing, no tantrums..

[@DavidSuttoninSpain]

Glad when its all finished and running, keep it up Western.

[@NoName-nb9qi]

I can not believe Westen made a video about rebuild the front end, installing front and rear suspension, dropping the motor and dropping the cab all in 1 video! That should've been at least 7 videos!!

[@erickespinoza9155]

Western saved me from boredom today from being in quarantine 🔥💪.

[@kuslak7241]

Watching them rebuild vehicles could never get old, they make it fun and worth watching...

[@TheTontomtoofat]

Heads-up: Hoonigan is putting a diesel in a Camaro. You have competition.

[@stuartpickles6907]

There is already a Miramax in a camera its basass

[@saulgoodman4769]

I feel like Hoonigan caters to a different demographic then you will find here.

[@bubbajulian7294]

Ol cleeter done had it...and roadkill

[@McClellan71]

@@stuartpickles6907 I'll watch that. This guy jumps around way too much

[@livinctry]

Hoonigans just a copy cat! Westin is a pioneer!

[@lambition]

Did you check lash and pinion bearing preload on that diff? It is more involved than simple swap.. I destroyed my rear diff because I slightly over torqued pinion nut when I changes seal. Took 1/2 year before it failed..

[@maxwell6504]

nope, he didnt. diff is probably gonna blow.

[@Backyardmech1]

Let alone did he also check to see if the ring and pinion teeth were meshing properly and adding the correct spacers on either side of the carrier.

[@scrappyhustler7467]

In case nobody noticed Westen and dom are trained professionals and they are boob tube mechanics which make them again professional!

[@10thclimbtovictorystevens65]

Have you not watched this channel? Dude literally can rebuild anything that has an engine. The chances of you knowing more than him are slim to none.

[@darrongiancola3476]

Love your channel and all the energy you guys have! Keep killin it!!

[@__KNOX__]

FOR REAL Everytime I watch Westen I am always in a better mode my the end!!! Thanks man I needed that today....

[@familyfleetdiy5977]

You guys never cease to amaze me. Love these videos! Stay safe

[@pinkywilliams8063]

Thanks for the video.... that was fun watching the Raptor come together, she feeling more better for sure.... Stay safe Wes and family...

[@zaclarkby6389]

Y’all gotta race Hoonigans diesel Camaro when the diesel Mustang is done

[@JM-yx1lm]

To hell with that dude. They're like 2000 miles apart.

[@MK-sk2mi]

Roadtrip!!

[@LWNDmax]

Cleetus galaxie

[@jkwo2007]

Hello, Western, you are always optimistic, always confront your challenges. I like these characteristics of yours.

[@czarekaj1098]

547K subs Weston! I remember when you were surprised to have just over 35K Congrats and keep it up bro!

[@bengone3349]

Another milestone! You never fail to entertain me with your work and personality.

[@thinman4648]

“Straighten” (rip in half), the old frame out with your bulldozer and tractor!

[@thinman4648]

Duca, because it would make a good fun video

[@kyboy5]

put a real frame under it

[@MustObeyTheRules]

How about instead, chain the old frame to a giant tree and try ripping it in half with the dozer

[@robedmund9948]

How you pull of these miracles is beyond me, Westen! Maybe it's that bright, positive attitude of yours. Then again, it may be you natural fear of big-ass cracks!! Either way, well done, sir. Well-done!!!!

[@joeysawyer7572]

Im. So glad queen B got back with you I've been worried. Havent heard from her in a while.

[@paulbickley658]

It was more enteraining watching this video than any others... You know when your sitting in your somewhat new raptor, you are going to be sitting on top of the world... 🌎 your show is the best vehicle assembly show! How many people are excited about seeing Wes in his Raptor?

[@brodey4359]

Almost 5 grand views in 6 mins congrats WESTON!!!!!

[@brodey4359]

@robbie G dude I'm happy for Weston, he's the person I look up too and to see him succeed after alot of hard work is amazing

[@riskyb250]

This is a great project. Real men rebuild differentials like its nbd. Impressed by your unpretentious skills as always!

[@12tuber1234]

14:22 "we'll just roll the frame fordward" that makes sense to me, wouldn't want to roll this truck dodgeward or chevyward.

[@barrybambmessagedeletedbyy7467]

You're alive!

[@SteezySteez2011]

Subscribed to see this series pan out, so awesome to see you guys already slapping the new parts on the frame, and getting ready to reattach the cab!

[@edwinpinero249]

Great people,friends helping you....wish everything works 100% perfect...my respect.....from Puerto Rico...

[@ryansocha5526]

These videos are the only thing getting me through this quarantine.

[@nitrogaming0982]

This has been a long 5 days man I wish westen would upload everyday or every other day like if u agree

[@joshc.6829]

This guy is awesome! My wife and I have been watching this Raptor project and we love the enthusiasm and the exp that goes into these videos! Nice work, keep it up!!

[@Unbearableboss]

Westen can we please get a Cummins first GEN update

[@TroubleBKC]

yes this!^^^

[@realrickharrison3103]

He sold it to me person man

[@Terk131]

Yes, update the 1st gen, it kinda just disappeared.

[@darkdays8004]

This

[@charlesortiz7019]

This is by far one of the greatest channels I have subscribed to. Keep up the great work.

[@drich6816]

I didn't see you set the bearing lash on the new diff.

[@kevinoscarson2941]

Haha...really think they did that?

[@vincescalise4821]

Hopefully someone did LOL

[@jefffowlerr]

If he didn't he's going to be replacing it all hope he did cause I was thinking the same thing I was going to replace mine until I seen all the tools I would need to do it right

[@darylnicklen3685]

Well done Westen, Dom and others that's a hell of a Job.

[@danf4616]

Missed opportunity: When installing the drive shaft, lube the splines. Then you could have said "Always grease your shaft." 😁

[@coltongreen4455]

my dad and I love watching your videos, keep it cataloged!

[@lukesanders7455]

Was the gear pattern even checked on the front diff. You have to set the pinion preload/carrier preload and adjust with shims. Probably will chop out the gear set rather quickly.

[@geoffmoroney9283]

Yeah, didn't see a dial gauge or gear marking compound on that work bench.

[@7natcho]

Luke Sanders glad i wasn't the only person who noticed that .... Honestly i would had stripped the differential down and welded the case ! I am fully capable of welding most metals but i have a friend / co-worker who is a VERY tallented welder . The damage on the pumpkin is a walk in the park for him .

[@markconley996]

I can't imagine anymore big ass cracks showing up in a westin video! !!! Gr8 progress.

[@paulcameron483]

Thank you sweet baby Jesus for entertainment... well, thank you Westin and crew really, BUT SERIOUSLY lol

[@pjak2000]

A one truly good thing to watch during the lock down! Thanks for great fun.

[@taylor_perez3607]

Finally I was so excited when I saw this video

[@adamdase3045]

Westen, you seem like a great guy to hang out with. I really enjoy your videos and builds! Keep up the great work!

[@puddmonkey]

I laughed more than I should have when you Hank Hill'd "GD Bobby!"

[@davidyoung9195]

You guys are fun to watch. You remind me of me and my buddy 50 plus years ago. Keep on keepin on.

[@user-tn2os8ts7h]

This episode has more crack than the streets of Chicago.

[@dr.potato_aim3254]

11:14 westen was so fed up with this shit the created clones to get it done faster

[@Spooky_Yellow_Doge]

I hope you set up those gears right and didn't just shove the old gears into to the new diff.

[@TheRoadhammer379]

I was thinking the same thing, I have never just dropped a R&P in an axle.

[@michaelj6886]

Amd ford diffs can sometimes be difficult from experience

[@james130211]

Nice to you guys working hard all along. Too many are taking advantage in seeing this as a way to be lazy or an extra long vacation. KUDOS to you and those still working hard!!!

[@sullysullivan9320]

"Dom knows all about big ass cracks" 😂

[@raymondpauze8801]

A budget breakdown would be nice. Always enjoy watching .

[@austinlucero6747]

She fed her husband to her tigers lol!

[@evilkermit8893]

#TigerKing

[@MrHuismeester]

Again a very nice video Westen and crew !! Looks again like a nice Truck !!!! Cant wait until the whole project is ready !

[@HighballHank]

7:19 cracked me up good 😂

[@JonBlondell]

Really glad to see a new post! Thanks Westen.

[@JonBlondell]

I'm not seeing Waylon, I hope he's ok?

[@mattbrew11]

Jon Blondell Covid + morbid obesity = no bueno

[@jeromefrady794]

Easy day at work, left on time without having to stay over and a Westin video, what more could anyone ask for...

[@zaclarkby6389]

Westen, you have competition. The guys at Hoonigan are also building a diesel muscle car.

[@johnparrish9215]

Cleetus Mcfarland has a cummins in an old Ford sedan and there is a very serious Nova with a Duramax running high 8s in the quarter mile.

[@zaclarkby6389]

John Parrish yeah but I was thinking that they’re both modern muscle cars with diesels

[@tokestermarshall]

Good freakin work Westen cant wait to see this monster back together and tearing up the road.

[@riskyb250]

"Carole Baskin..THAT Bii" lol

[@rbhaskin]

I'm hoping you just skipped the gear set up steps in the video ... Nice work boys looking forward to see this beast rolling down the avenue

[@DeltaKilo77]

When are you going to take the Fummins into the Ford dealership for an oil change?

[@official.drebangbang]

I loves the way Westen so excited rebuild and restore those things and the engine on the new frame of Raptor. I like it and hes so funny 😂 . It's good to see what their doing tho

[@mikebelcher5111]

Damn it Weston I smashed the like button now talk my screen down at work....it's got a big ass crack in it thank Weston lmao

[@Deography]

Just the right amount of DIY project, humor and butt crack.

[@iowafarmhandonajohndeere5902]

“My name is John Wayne”- Dom 2020

[@willrobertson826]

Glad to see raptor is progressing

[@MrHowieZ1973]

You really need to go spend about 5 grand on some Milwaukee power tools.

[@huntersmith8062]

Coming along great job pouring with love from Missouri ❤

[@mitchellgant1396]

Hunter Smith where you at? Stockton, MO here! 🙋‍♂️

[@huntersmith8062]

@@mitchellgant1396 kansas city

[@PhilBender612]

Dam Wes, shes getting close. Soon you will be known as WESTON THE RAPTURE MAN!

[@glennhobbs59]

Wow you guys are killing it. Great job

[@josepholiver6733]

Can’t wait for the mustang to be dun

[@RobertHolster1]

Yea I've been waiting for that one too!

[@ciaranmcloughlin6684]

I can't wait to see it

[@boydboys9084]

Cumstain*

[@darrellroeters4951]

You tackled a big job, proud of you.

[@dandeecowboy1]

Man I wish you guys would do something about the video zipping in and out and across and and and and. I love watching your channel but this is hard on the eyes.

[@patricksproule6709]

It's called the Jello Effect. It's common on many CMOS sensor cameras when panning quickly.

[@richardbryant7972]

No big step for a high stepper, glad to see your still at it.

[@killintimeracing1368]

I keep waiting on goonzsquad's dad to make a random appearance

[@melvincherry5061]

I love your positive attitude about every build. Keep up the good work!

[@heltespanden7205]

what music do you use this is good edit found it

[@connorhutton7632]

helte spanden what was it. ?

[@heltespanden7205]

The momory of you swif7

[@kap1526]

I like his positive energy , great job dude, you rock !

[@robertwuebbling1025]

The irritation of a former axle Assembly tech from Dana

[@jmaxw2121]

“This part here is expensive” and immediately Throws it on the bench lol I love these guys

[@252laylow]

9:00 Carol Baskin lmao

[@dhovat]

Starting to come together. Looks great so far.

[@ThomasHA1982]

If you don’t like it anymore I’ll be happy to take it off your hands 😃🙏🏻🙏🏻🙏🏻

[@chrisrice2083]

Wow that's awesome looking good so far can't wait to hear it fire up and see you drive it

[@raovchaos5463]

Where did you find the mix you used for the time lapses ive been looking for like 30 mins and cant find it lol

[@yourmother946]

Swift7 the memory of you

[@Kurieitaa]

When you see parts everywhere, we call that 'yard sale' lol, keep up the great work guys.

[@AlejandroP1980s]

Hey may I ask you something is that car a 1968-69 Coronet super bee or a roadrunner GTX satellite

[@Kurieitaa]

@@AlejandroP1980s its a 318 1968 satellite sport, soon to have a gen 3 hemi, just have to put it in lol

[@matteger9500]

Dom looks like he’s being held there against his will

[@TheHankerchief26]

"Essential personnel"

[@jimmurihiku8009]

Breath of fresh air this morning in New Zealand 😷 Thank you guys😊🌞

[@dmeads5663]

$5 says that engine or transmission has a hairline crack in it that they won’t find out until later.

[@robertgall1275]

I think they are also going to find out that the axle shafts and axle tubes are bent as well...

[@gregkoerber5820]

Many more misses and Weston will be doing something else. Very expensive stuff to find after you start rebuilding. Hard to do in a rented garage.

[@shartne]

You guys got a lot done. I have seen that Oreallys guy when i lived in Piedmont Kansas. I didn a little work on my dads farm and his trucks i think i remember him it was 20 years ago though.