Wera Robertson Square Plus Screwdrivers. What is Square-Plus? Bits too?

linktr.ee/bzeug for instagram and more links
www.amazon.com/shop/bzeug
Wera #3 VDE Red and Black Square-Plus from KCTOOL: bit.ly/3PA8lJD
Wera #2 VDE Red and Yellow Square-Plus from KCTOOL: bit.ly/3EUXtBf
Wera #1 VDE Dark Green and Yellow Square-Plus from KCTOOL: bit.ly/46ubHVb
Wera #2 Red and Gray Square-Plus from KCTOOL: bit.ly/3CUZNHj
Wera #3 Black and Gray Square-Plus from KCTOOL: bit.ly/3PBIUHy
Wera #2 300mm Long Red Classic Handle Square-Plus from KCTOOL: bit.ly/48C0MLe
Wera #0 Orange and Gray Square-Plus from KCTOOL: bit.ly/46qQV90
Wera #00 Yellow and Gray Square-Plus from KCTOOL: bit.ly/466M0KG
Wera Square-Plus Screwdrivers Various from KCTOOL: bit.ly/3RCbbAv
Wera Impaktor Diamond Square-Plus Bits from KCTOOL: bit.ly/3LK7F34
Wera Bit Torsion Square-Plus Bits from KCTOOL: bit.ly/466MjVQ
Wera V "wedge" Square-Plus Bits from KCTOOL: bit.ly/3PBodf2
Wera various Square-Plus bits from KCTOOL: bit.ly/3REhiEk
Amazon USA affiliate links:
Wera Square-Plus Screwdrivers Various: amzn.to/3rxeuOD
Wera Square-Plus Bits Various: amzn.to/3EZX4NQ
Amazon GERMANY affiliate links:
Wera Square-Plus Screwdrivers Various: amzn.to/3RK97Gz
Wera Square-Plus Bits Various: amzn.to/46yFQTh
#tools #wera #werkzeug

[@Bornintheseat]

As a good Canadian I love my Robertson screws. I've used Torx screws a handful of times and find them to be inferior. 99 percent of the time I use wood screws with an impact but your video has inspired me to give the wera screwdrivers a try. I recently rebuilt a deck, and a relatively recent change I've noticed at big box home improvement stores, the Robertson wood screws are no longer made in Canada, and incidentally have way more defects in the batch. Far less reliable screwdriver retention as well. I am turning into an old man complaining about the good old days of screws lol.

[@kittytrail]

thanks to Warren WEF Buffet your canadian screws are now made in PRC and are way more profitable for him and his ilk... 😏👌

[@markhartgraves1880]

So glad you made this video. As a second generation cabinet maker as well I've always been on the lookout for the best #2 square bit. Currently it's between felo and wiha terminator especially their new 3.5" terminator bits. They stick on like glue. I've tried square plus but In a drill under force the bits seem to like to pop off the side I definitely feel like in the context of wood screws they are best used just for removing worn fasteners.

[@bcwrangler]

Canadian here... i didn't know that there was a Square + in Wera. i do have the black/red/green Wera screw drivers you show in my tool bag and i like the feel and fit of them. They're my go to for electrical. I've never seen 00 or #4 Robertson that i recall.

[@hard-die-fan]

_It's hip to be square+._

[@chriscas-ToolAficionado]

I called them square-plus many years ago. I was so surprised that none of their literature mentioned that feature. That seems to have changed in recent years as you showed with their bits. A few years ago I bought their square bits and yes, they are square-plus. I've never seen a #0 or #00 square, so I don't even own that size of screwdriver.

[@LilasTools]

Square plus?! I had no idea. Wera Robertson drivers and bits have been very good for me though!

[@jamesrodgers3132]

Here in the UK, Robertson is not very common, and I've never seen anything other than #2. For those, I find I can usually get by with a 3.5mm flat, which is a common electrical size and a pertect fit diagonally.

[@FixitFred]

As a Canadian these square screwdrivers from Wera are the best I have ever used. Also honorable mention to bondhus they have a ball drive square screwdriver which lets you tighten on an angle

[@johnnewell5025]

Nice vid, caused me to spend some more money on Wera drivers… 😆 But I want to comment on the ECX drivers and bits. Actually, I’m not sure that different tool companies are following a consistent spec. For example, Milwaukee’s drivers and bits (which in my experience work particularly poorly) look like they’re a combination of slotted and square, but others look more like slotted + Phillips or square + Phillips. Years ago I bought a pair of GB insulated screwdrivers and the combo/ECX driver (which is currently MIA) worked magically. The MW and Klein drivers and bits don’t work nearly as well, and you stated the reason: they don’t engage most combo screw heads very well. The Wera R1 driver work =really= well, maybe because of the “plus” tip configuration? - not sure about why, but sure about the results.

[@steve197232]

As always good video. I have been switching to Robertson when I can. I like the retention.

[@steve197232]

@@htr5372 how do you know I don’t buy Robertson brand screws?

[@peterryan7340]

We don't see square drive much in Australia

[@markcoulter3480]

Good video. You mentioned the hybrid #2 square with a flat not fitting as deep as a normal #2 due to the flat point being flush with the square point. I just received some PB Swiss bits today and one was a 2 CPZ that has the flat tip recessed a little lower than the square tip allowing the square to go in much deeper for a better fit. Works great for electrical receptacles.

[@scott5106]

Another great video thanks for the info.

[@kylehazachode]

I have a drawer getting filled with unused Robertson #3 bits. I switched to Robertson in the early 2000s. I prefer the color coded bits so I’ll buy the Rack-A-Tiers variety pack which happens to include #3 bits. I still haven’t got in a situation where I need a #3 bit.

[@kittytrail]

interesting (square of course) bit of info, those canuckian Robertson screwdrivers with CompoGrip handles have a german tool making heritage too having been patented by a german guy named Will... 😗👌

[@prasadvn524]

Very informative

[@goodygiggles5410]

What's a high bread?

[@robertrada4783]

Wera make the best Robbies

[@darrencampbell8817]

Not that I think it's a huge deal outside of square Canada, but thank you for calling all these fackers out. This needed to happen.

[@iangregoryhome]

Confusing, can't the sizes just be stamped on the top!?

[@bzeug]

Oh man how did I miss that! The sizes are stamped on the top. I forgot to show that.

[@kittytrail]

isn't being usable by -dumb canucks- innumeracy afflicted _screwy northernerds screw turners_ why the size has been indicated by the colour of the driver handle since the last century? 😏👍

[@confuseatronica]

do they make milk? MoWera Milk Bar

[@sp-vt4je]

*Plus

[@KaBoOM444]

Wera's square plus is BS. If you're slightly off centre with an impact they're almost as prone to camming out as the ol' Yankee phillips bit. Proper robbie bits pretty much center themselves. It's getting hard to find proper robertson bits - Task tools makes proper bits but they barely put any colour markings on them. For screw drivers, Gray makes damn fine robbie screwdrivers, and Klein's are a close second. I've only seen brown robbie heads once, in the cast iron harp of an old piano. You'll run into yellow robbies occasionally in electronics, I've seen them used to hold down circuit boards in old small electronics.

[@poldomalese]

Fwiw, you pronounce hybrid in a weird way

[@sp-vt4je]

I think Wera needs to quit making up names for screw types that already have a standardized name out there.

[@kittytrail]

they don't want to pay so they'll make weird names on the go... 😸

[@robertrada4783]

“Square” IS the standardised name for Robertson. Torx is “hexalobular” or something akin.