RYOBI, Milwaukee, Makita, DeWALT JUST THE TIP Tool ACCESSORY Testing!

We Put your favorite driver & drill bit tool accessories from Milwaukee, DeWALT, and Makita against Ryobi in the ultimate drill bit tool comparison! We built the Bitty Twister "rotisserie" Just The Tip style driver bit testing rig to "prove or Dispel" claims from RYOBI that their new 2 in. Diamond Grit Impact Drive Bits are better than all the competition sold at The Home Depot from Milwaukee Tool, DeWALT, and Makita! If you use tool accessories like drill bits and driver bits you'll wanna watch this video till the end because the results of this Just The Tip tool comparison will shock you!
Get the limited run Bitty Twister T-Shirt vcgconstructio...
Get Diamond Grit Driver Bits homedepot.sjv....
Join this channel to get access to perks:
/ @vcgconstruction

[@VCGConstruction]

Watch us PROVE that you can't always TRUST Tool Testing from the Brands! kzbin.info/www/bejne/l6C4gYOhn8Z3bdk

[@ryantreuter]

So I'm building a shed in my back yard. I kept stripping screws because I had cheapo Ryobi bits (and I have a bad habit of not keeping it perfectly straight) so I bought these Ryobi diamond bits because of this video. At first it was a GAME CHANGER... And then after 20-30 screws the coating wears off. Then I think they were just as bad (if not worse) than regular cheap Ryobi bits. So if you're on a budget and using a drill or lightly impacted they really are awesome. Just know that once the "diamond grip" comes off, game over folks.

[@briancockerham4731]

good info big dawg

[@gpjadams2]

I hope everyone sees your comment, because they need to.

[@NonieTools]

This is the real info no gimmicks. I watched a video by project farm about all these bits and they put them through rigorous testing and the Milwaukee shockwave bits showed almost no damage at the end. They were the clear winner. And that's what matters, how long they last without getting rounded and chipped, not if they can stick to a screw when they're brand new!

[@elic.2443]

Good too know

[@rickdavid1795]

Thanks I almost fell for it.

[@Icantball67]

Also something else to consider is the orientation of the first screw vs the second and third. Assuming their just Phillips head screws and not a Phillip Robertson combo. Does it matter if the star looks like an “x” or a “+”

[@kemalknight5505]

Don't know why I need a bit that does this but..... take my money.

[@VCGConstruction]

🤣👍🏻

[@slayerment]

Ryobi representing and Chaka lovin' it!! 💪💪

[@VCGConstruction]

He’s gonna blow a gasket! 🤣

[@djjinerson]

He’s eerily silent 😳 maybe on his way to ryobi hq for some sabotage 🤔 or his brain short circuited after viewing 🤷‍♂️

[@sanfranatic1]

He said Ryobi tools are trash...has he ever said Ryobi bits are trash❔❔🤔

[@andrewwithers530]

Very impressive. We need more testing with different fastners.

[@VCGConstruction]

🇬🇧

[@thisgirlshoots1791]

I'm heading to the Depot to get those Ryobi bits!! Love the bitty twister shirts!!!

[@harlanborders943]

Very impressive did not see that coming

[@Icantball67]

Also I’ve found and I imagine I’m not alone, manufacturer bits are made shaped for screws every so slightly different and the same goes for the impressions in screws. Resulting in different brand bits that work better or worse depending on the brand of screw that you use.

[@Slothtacular]

Yo Vince. Long time/first time. I have never been in a situation where I have had to stop working in the middle of driving a screw and leave my driver hanging. That being said, is the fit of these bits that much better, or is it just a coating that will wear off over time?

[@AtimatikArmy]

It's called diamond grip so I think it's safe to assume it's got some diamond dust in the mix and that is what's giving it the extra non-slip grip. IMO

[@snhvnc]

Definitely need to see different fasteners. I have Dewalt, Makita, and Milwaukee bits. Really like all of them. I'll need your further testing to see if I'll add those Ryobi ones. Thanks Vince!

[@oggoblin295]

Yeah, love to see those tested in different types of fasteners 🤘

[@VCGConstruction]

👍🏻

[@mjc8761]

Wow pretty cool! I would like to see it with different screws

[@toddincabo]

Just testing the tip, no worries ma'am.

[@VCGConstruction]

🤣🤣

[@skyemac8]

Ryobi has been killing it just a bit.

[@jaypowell0185]

I love to use the Makita bits, but that was very impressive.

[@HVACGUY]

Something about the sound of that impact hitting the floor made the whole thing worth watching.

[@VCGConstruction]

🤣

[@kentuckybeardsman]

Def should try other style screws and the other bits from this box of Ryobi diamond goodies

[@bronxbirdman21]

Gotta love the success of this channel!! Keep up the great work, VCG!! 👍👍

[@VCGConstruction]

Thanks Bronx, We appreciate that!

[@jporreca32]

The Bitty Twister is here!!!

[@VCGConstruction]

🤣🤣

[@arnoldmarcus3634]

Phillips were originally designed to cam out to limit the torque. It’s a feature not a bug. If you need more torque, use a different pattern.

[@JeffDM]

Looks fantastic but there's so much effort to make the drive bit not cam out even though the drive profile was originally designed to cam out.

[@Gowaduv]

Come on down to the Bitty Twister! If you can find a better driver bit - SCREW IT! I'm really impressed with these, gonna have to replace some but drivers just because haha

[@VCGConstruction]

Driver driver hey impact driver lovers! 🤣🤣👍🏻

[@roberts5erauedu]

Don't get me wrong I love the tool deals and that's why I got the bell on but these videos are why I started watching thank vcg

[@Jside68]

Love the video, but I need to mention that the test you did and the Ryobi test is not exactly the same. At first there was a lot of jerking motion in your twisting device. This back and forth motion is probably why the driver falling down. Looking at the Video again, you can see that the Ryobi jig is a lot smoother. Your third test was a lot smoother and reacted more like the Ryobi demo. Good job on going above and beyond with your testing and showing us the latest tools we "need"!

[@fraz6004]

I really enjoyed watching this video. It was hilarious, but most important, it was extremely helpful. Thank you!

[@VCGConstruction]

Glad it was helpful!

[@Icantball67]

Looks like Vince’s first attempts spinning the rotisserie with the drill were too jerky jerky

[@Kemm1214]

Bought a pair just now. Thanks a ton

[@VCGConstruction]

👍🏻

[@IMPACT-NATION]

Definitely watching From Dusk Till Dawn tonight! Salma Hayek in that movie!!😎🙌. Love this kind of content brother. Definitely keep them coming. Much love VCG crew

[@VCGConstruction]

Dang cuz, I think you’re the first to make the connection!

[@IMPACT-NATION]

@@VCGConstruction 😎✊😎💯👍💪

[@bradywernlund5228]

Great Video! Test the Ryobi bits under heavy load similar to the Milwaukee matrix bit that failed

[@VCGConstruction]

Good idea, and they do have #3 Phillips with diamond grit so that'll be a really high load!

[@johanneiden2987]

That was crazy!!!! Vince, have you look at or use Spyder Co bits?

[@VCGConstruction]

I’ll check them out Johann, thanks!

[@setheverhart]

Since you asked - I do not need more Ryobi bit videos. You the man.

[@austinboynton8494]

Haha getting a 2 in 1 testing, seeing how manny times the ryobi 1+hd impact can fall on concrete.

[@tdorney4334]

Dewalt has the best inclusive line of accessories and bits. Hopefully everything is sold in the tough cases and then it’s a no brainer

[@georgeferlazzo7936]

Hello again Vince and Vcg Thank you for another Great. Okay I am impressed. But how does it work? Will it remove/install say a hundred screws? With no cam out? In other words, is it worth buying? Again thank you

[@nextgentech4192]

It would be awesome to put the ryobi bit against spiders macblue driving bits. As an electrician I found out spiders bits are the best bits on the planet. They beat out every other brand on the market

[@hansangb]

OK, not gonna lie. That's pretty impressive. I'm going to have to buy one to test them out. Also, the "just the tip" is so sophomoric, but I chuckle EVERY time! LOL. EDIT: HD charges the same for 12 or 22 bit pack. For $9 and change.

[@mikepagel8100]

Excellent test! Very informational and fair.

[@musictypefoundry7345]

"I have a simpler explanation. You are all not worthy!" - Ryobi

[@tracyprzystas9350]

Vince, Bring on the fastners

[@hugheffo]

Just watched this and have one question. How strong was the magnets 🧲 on each bit ?

[@1ELiMusic]

Duuuuude! Ryobi got it right!

[@VCGConstruction]

Crazy

[@1ELiMusic]

@@VCGConstruction I think. I repeat, I think, Ryobi is onto something big and will be up to par with the big boys real soon. Mark my words!

[@laremystraub3798]

Wife and I were installing a fence and had one of the Ryobi Diamond Grit phillips tips break off inside the screw. Just snapped. The rest worked fine. Went out and bought some DeWalt tips after 😅

[@lcook0825]

Good video Vin. Thanks.

[@VCGConstruction]

Thanks Larry!

[@josephabaddi8226]

They did a lot better than I did with “just the tip”

[@user-cs1ne8gx9u]

The clocking of the screw may have an influence. Still pretty impressive compared to years ago though.

[@skyemac8]

How about diamond Wera bits?

[@nitrorc4life1]

I recently tried wiha bits, assembled over 24 grills, patio set and various smaller items (about a dozen) and it still bites screws enough I have to forcably remove from screw at times. I’m normally a Bosch bit user.

[@sendmedics]

More testing but I definitely think I’m getting these bits. They’re priced very nicely as well.

[@jmackinjersey1]

Before you made the second test, I was going to point out that when you rotated the block, it was bouncing, and the Ryobi display was smooth. Then you did your own smooth rotation and it made the bit hold.

[@juanvelasquez635]

I am a Milwaukee fan through and through but my bits of choice are the RSC Powerdrive bits never ever had a better Makita XPS bits are a close 2nd but I am excited to try these Ryobi Diamond tips. (Alarm Tech Installation Field)

[@VCGConstruction]

Thanks for sharing

[@Bootchair]

9:03 thought someone had a GTR on a dyno next door for a second 😂

[@randysmith9636]

I'm highly impressed with those bits. Yes it fell at complete horizontal but still, I have never seen a bit grip that well. Well done Ryobi, now change that dang kids toy box color.

[@AtimatikArmy]

You care about the color? It's a tool, form follow function!

[@1891kmk]

Come on color ain’t that bad

[@randysmith9636]

@@1891kmk For a kids toy. When you look at all the "Professional" looking tools out in the market and on the job site, red, yellow, blue, gray, orange and black, none gives the impression of being a cheap tool. Now look at kids sand box toys, bright and colorful.

[@randysmith9636]

@@AtimatikArmy I do, none of my tools look like they belong in a child's sand box. Ryobi is definitely not at the top for form or function. If they were kicking everything else off the hill I could get behind you statement.

[@AtimatikArmy]

@randysmith9636 I didn't claim.Ryobi was at the top in forn following function, but putting so much emphasis, or any emphasis on a tool based on its color is completely ridiculous! If that's you, then I can not take anything you say seriously.

[@RidgidRon]

My shirt has been ordered-that was over the top funny. Good Testing Vince!!! The smoother movement of the tester was better than being jumpy. What if you put the screws in an X pattern versus a + plus pattern? Do you think the outcome would be better or the same of all the bits? Only the Bitty Tester will know!!

[@VCGConstruction]

I appreciate it Ron, you are the first to order, thank you! I can honestly say I’ve never seen a bit grip so well, I don’t think the other bits can compete in that regard no matter which direction the screws are but we can always do further testing my friend!

[@focusonthefocus]

I guessed right! Very impressive!

[@benjoys6148]

Are you going to review Milwaukee cable stapler?

[@gettuffstudios]

Yes need more tests, use different screws with the Ryobi Diamond tips

[@mak450]

Shout out to that Ryobi for taking all those drops

[@VCGConstruction]

✅

[@daniel.x.r5848]

Oh so sad, Vince you dont deliver your VCG Merch outside of the US 💔

[@ryanguldbrandsen7672]

Alot of companies have diamond coated bits. Wera makes some nice diamond impact bits.

[@nathanpotter8569]

Ok, I didn't get to see this one when first posted, the short video worked, I laughed when I saw them in the aisles. Might need to take a 2d glance at them.

[@curtisyue182]

Well I'll keep this in mind next time I need to hang my tool my the bit lol. I'd love to see those ryobi bits durability tested.

[@markknister6272]

OH, yes! TEST!!

[@mopower01]

What about Hart? I remember a video you did a couple years ago where you hung the Hart driver in a #2 Philips screw with the impact rated bit set. 5/26/2020

[@VCGConstruction]

You want Hart in the Bitty Twister?

[@mopower01]

@@VCGConstruction They passed the just the tip challenge. Let's see if they can "hang" with the big boys.

[@bm2618]

Try wera Diamond coated bits.

[@Adam-qu7zn]

Shoot I love the title!! That movie was George Clooney and Quentin Tarantino at there finest!!

[@RileyNewcomb]

I’ve had the One+ mini impact and drill for a couple years now and they’ve never failed me, plenty of power for the work that I do

[@johnnyyaap]

we want MOREEEEEEE

[@bros558]

i just gotta get these bits now. this is nuts

[@VCGConstruction]

Good stuff Mario Luigi & Luigi Luigi!

[@zakthompson6870]

Yeah but there rotating piece of wood didn’t stagger and yours is doing maybe the gear ratio or the bearings ?

[@mikee6657]

if you look at the Ryobi, the bit looks more like sandpaper it's rough. the other bits are smooth like glass, there's nothing to bite into the screw.

[@bikewurks1757]

Still pretty impressive

[@canadiancarpenter7152]

Love your show Carpenter here .... Milwaukee guy in tools

[@randymathews3348]

Xps are one of my favorites. Literally have them and the golds in my work pants back pocket 👍

[@VCGConstruction]

Which you like bette? I’m pretty sure I like the xps over gold!

[@randymathews3348]

@@VCGConstruction 60/40 XPS

[@zaimhazmin8851]

if its toppled xps, its good. its really good

[@DGALVIN45]

Love me some Wiha or Bosch bits 💯

[@B.r.i.a.n.1]

Crazy cool

[@mieciubimber9404]

This is awesome. Buying it when i would need extra bits :)

[@VCGConstruction]

Glad you like it!

[@bigmex8794]

Jesus! It took me 3:47 to get to the damn video.

[@meagaindave2049]

Yo Vince! "Bitty Twister" 🤣🤣 brilliant. Question: has Ryobi actually made an accessory that, not only rivals but, is BETTER than the competition? If so then I must react with an impression of TRZ. WHAAAA....?😲. 🤣🤣 Thanks for the demonstration and the video. LIKE button SMASHED!! May God bless the Carneglias and the very cool gang! 😁👍✌

[@VCGConstruction]

Thanks Dave, you da best!

[@CalvinHobbes92]

Ryobis rotating wood thing is turning a lot smoother.

[@batfreak6897]

Their test was in constant motion. Your test you had started and stopped so briefly where the impact bounced a little bit that’s the difference

[@boosted2.4_sky]

Wera has diamond grit driver bits...🤔

[@VCGConstruction]

I’ll have to check em out Craig! 👍🏻

[@thegreatoutdoors2000]

Brilliant Vince

[@forestwalters3847]

Ok now that I’ve watched the full length video my opinion stands use that bit your promoting as much as the majority of tradesmen do and tell me how great that bit is

[@KingYang05]

Bill Clinton approves of this video.

[@VCGConstruction]

🤣🤣

[@cheesethedad1855]

I'm only here because the phrase "just the tip". I mean I work in an office.

[@brandonwenzel5377]

Why would I need to leave my impact hanging in a fastener like that? Never had to previously, I don’t know what the relevance is.

[@tizzroy5769]

Bro, I'm not wearing a shirt that says just the tip testing

[@beetleclemens3727]

Just awesome awesome awesome awesome awesome awesome

[@ianthompson6288]

The orientation of the screw is going to make a big difference in this test

[@VCGConstruction]

really, why?

[@ianthompson6288]

@@VCGConstruction I would of thought that if the lines of the cross were horizontal/vertical to the drill bit + position it would offer more grip .more surface area of bit to the screw.simalar to if you were mounting a bracket to hold something .we're talking fractions of millimeters in holding area but feel it could make a different if I was to try this (in fact I might do) but I could be wrong in that .there did look to be a clear winner overall

[@crazymike4894]

They seem to be working well 🤔🧐 for the research may have to be done with them tips🤔❓🧐 as in see how they work with twice by 4 🤔 And a whole bunch of screws😍❓

[@ChibiTheEdgehog]

Loo, this has such a QVC vibe lol

[@arlanmckee]

Other than sheetrock, I dont understand why anyone would use Phillips drivers. Torx was the best thing to ever happen to exterior screws and If they had been around sooner I might not have had arthritis removed from my shoulder when I was 42. You don't even have to push to drive that 3 inch screw with a torx.

[@rudyvalentin1789]

Now mind you, I would have at least put a pillow or cushion at the bottom so the tool has a soft landing.

[@TheGreybush92]

My ryobi bits were Amazing and honestly I liked them more than my Milwaukee bits

[@lonedesertfox]

The Bosch diamond coated bits will do that although I have broken those much more often than other brands.

[@lancehall8267]

You let the bit twist on the screw on the Milwaukee and Dewalt. No wonder it didn't work

[@silkysh1t]

I had to use some drywall screws in oak when a coworker forgot some supplies. A few of the heads popped off using the xps bits and the heads were stuck so well to the bits that I had to pull pretty hard on them with my cobra pliers to get them off they fit so well

[@kc0lif]

impressive.