Beiter Plunger Tipps & Tricks

[@Bob-ts2tu]

Beiter products are always so well made and a joy to use, i have this plunger and microklicker also, both are quite a bit more expensive than other makes, but you get what you pay for, and as they say quality is remembered long after the price is forgotten.

[@127TROOP]

Excellent tutorial...thank you...NOW I understand my Beiter plunger......

[@re8ktor]

Herrlich Andreas, Respekt für das saubere Englisch, und für die wirklich helfenden Infos

[@wernerbeiter]

Vielen Dank!

[@miguelblancoalcocel3475]

excelente explicacion se venden las tuercas para cambiar el tamaño?

[@wernerbeiter]

Seguro :)

[@toxy1948]

This is a great explanation-best plunger out there.

[@wernerbeiter]

Thank you!!!

[@kraffles]

Thank you, very informative.

[@sjohn_8627]

So if I buy a 17-23mm one… then buy a small nut it’ll give me an extra 4mm??? So it’ll measure up to 27mm??? I need an over all length of 26.55mm

[@wernerbeiter]

If you also buy a small 7mm nut you will have up to 27mm correct.

[@MrIanfurniss]

Very useful info, and thank you for all your great products!

[@crispinduenas7297]

Great reference video! Thanks Andreas!

[@wernerbeiter]

Thank you Crispin!!

[@m.j.rogers6801]

Well done Andreas. I'll be sure to share. Thanks.

[@wernerbeiter]

Thank you MJ!

[@jumpingjoly]

Great tutorial!

[@wernerbeiter]

Thanky you!

[@marjanpodrzaj1518]

Thanks Andreas, useful tips for every archer. Best regards

[@wernerbeiter]

Welcome!! Took a while...

[@ArcheryGeorge]

Yes Andreas, some great tips. Hope you are well.

[@wernerbeiter]

Thank you!! All good

[@AntonLevshunov]

Thank you, was useful. So, 17.5-23.0 mm and 21.5-27.0mm versions of a plunger have the same length but the size of the nut is different, right? And the 25.5-29.5mm and 31.5-34.5mm versions are long version with two nut sizes?

[@wernerbeiter]

Exactly

[@adriang.3866]

Thanks! Very usefull tutorial.

[@wernerbeiter]

Gracias!

[@lorrainehaymes410]

Quick query, with a draw weight of 26lb would you suggest med spring at 7-8, or light spring at 5? Many thanks

[@wernerbeiter]

Start with center position 5 and find the spirngload needed by tuning the bow correctly

[@lorrainehaymes410]

@@wernerbeiter with the light spring?

[@wernerbeiter]

@@lorrainehaymes410 you can start with it...yes

[@slowmotionarchery]

What's the reason for the round end on the wrench? Are two wrenches provided so that one is a backup or is there some other reason? Thanks!

[@wernerbeiter]

Dear Lester we had the yellow one since ever...and we gave 2 of them in each box. Than we realized that when the barrell was too close to the nut, you were not able to screw off the plunger from the bow as the open end of the yellow would not fit over the barrel. So we made the red/orange one with 2 open ends. We kept the yellow as it is, as it has the chance to better adjust the hex nut of the springball.

[@slowmotionarchery]

@@wernerbeiter Thanks!

[@AbdullahÇağrıERDEM]

@wernerbeiter you re totally german... Like mg3... But we want to PKM... Why dont you simplify things?😄

[@harimathur2191]

Now that I know my plunger better, I'll get a better Beiter plunger😅

[@polycrase]

Why not make the wrench out of steel instead of cheap plastic?

[@DemBones7]

So you don't overtighten and damage your plunger or riser.

[@randallkadish5663]

Still have no idea how to measure the length.

[@werneririscenterbeiter2066]

If you dont have a caliper just use a regular measurement scale and measure the screw in depth from the plunger tip front to the nut.

[@pufek77]

Thank you

[@wernerbeiter]

Welcome

[@mikebyford5258]

This should be part of the user manual with such an expensive button

[@wernerbeiter]

Mike... it is available online.. :-) I mean this is better than a user manual.. you can watch it at anytime on your cellphone

[@BennerWild]

Das ganze auf Deutsch wäre schön....

[@wernerbeiter]

Ja.. das stimmt.. aber es gibt so viele andere Sprachen und unsere Produkte sind in 180 Ländern erhältlich. Da wir ein kleiner mittelständischer Betrieb sind und selbst zu 100% in Deutschland produzieren haben wir nicht die Zeit und Möglichkeit Zeit zu investieren, die andere haben. Wir können uns vorstellen.. keine zufriedenstellende Antwort, aber wir konzentrieren uns auf das was wir können,...Filme zu machen gehört nicht dazu! Wir sehen nur, dass wir Informationen bereitstellen müssen und versuchen es in einer universellen Art und Sprache zu machen.

[@BennerWild]

@@wernerbeiter das verstehe ich 😉 bin auch so zufrieden mit ihm 👌🏻

[@klausmuller8364]

Thank you for travelling with Deutsche Bahn...genauso doof