Wet Soda Blasting a Motorcycle Carburetor- Vapor Honing Technologies

[@scottdowney4318]

Nice looking and quick. For a DIY, simply you can use white vinegar soaking for several hours. Vinegar will clean all parts of the carb and also dissolve all kinds of rust.- corrosion.

[@geneva760]

In my opinion - the wet soda blast produces a more OEM appearance than using a grit such as glass etc and therefore would be very suitable where an exact factory look is still desired. Have a safe and nice day. CHEERS from AUSTRALIA.

[@VaporHoningTechnologies]

Thanks

[@EvrttGrn]

Awesome, You just answered my question about if reusing soda media was possible in a wet/vapor blaster. Thank you.

[@Waltkat]

This type of cleaning has been widely available in Great Britain for years (called vapor blasting), wish I could find a local outfit here in Calif. to do this type of work. When I call around, no one even knows what I'm talking about. Does an amazing job on alloys and is far superior to anything else requiring a delicate touch.

[@VaporHoningTechnologies]

Please visit our services directory to find vapor blasting in your area today. vaporblastingservices.com/

[@VaporHoningTechnologies]

Vapor Blasting uses many types of abrasive not just glass beads although this is a very common abrasive used.

[@TheRetiredtech]

did you watch the video?

[@Meisenheimer1938]

go to this website: www.clemcoindustries.com and seek a distributor in California. That distributor would know who has purchased soda blasting equipment and they might be who you could contact.

[@frankbutaric3565]

You can use an attachment on your pressure washer to siphon media. Works good but clogs easily.

[@wahyuistambah]

whether it is baking soda or soda ash ?

[@radioguy1620]

Good video and good luck with your products.

[@HTMR]

What is the price range of the machines listed on your website? I currently use a harbor freight cabinet with soda followed by an ultrasonic cleaner. I'm really happy with the results considering how much I have invested in my setup.

[@VaporHoningTechnologies]

Matthew, please contact me @ [e-mail] . Thanks

[@eleishadayman5590]

Vapor Honing Technologies and

[@robertbarton5464]

MatthewMCRepair

[@AshokKumar-fu3kx]

Vapor Honing Technologies r

[@Aikaramba12]

D.T. Baker because you can buy the parts you blast Brand new for 10 years before it is a good investment

[@JohnMSawyer]

I know it's obvious, but if you're cleaning a part that has areas that you can't get to easily or effectively using a blasting method, it can help to first soak the part for a few hours (if you've got time to do so) in some kind of cleaner. I've found that even a very basic approach of using Pine-Sol mixed with hot water is effective, and then I do the soda blasting.

[@bittainment5995]

What is the life of soda xl formula. How many engines can I clean with it. Is sodium bicarbonate reusable like glass beads.

[@VaporHoningTechnologies]

Good Morning this is Niki. You can use soda for 2 engines. Yes it is reusable. [e-mail]

[@tims317]

how can I get one of those blast nozzles

[@Cobra427Veight]

Slack Bastards !

[@anibbotson]

Wet soda blasting recycles the soda, but it must degrade in particle size with re-use so could you explain how long the media lasts before it has to be replaced please?

[@dominickty4943]

instablaster...

[@boltonky]

My problem i don't want to spend $400 on 50lb bag of soda for my home vapor blaster considering it eats glass about x5-x10 quicker than my dry system (although it involves more safety equipment not to die). I consider there maybe a flaw in my system but as i don't have a professional handy i probably will never know or be explained how the soda doesn't just dissolve (as got told pool soda work too and is cheap) I will get there or ill get rich first and by a commercial setup

[@zzubuzz]

I searched here to find out about firearms cleaning with soda, could find nothing about dry or wet soda blasting to clean carbon and or gunpowder out of a gun..can it safely do it without harm? I know it would be followed up with gun oil..needless to say. I ask cause I have a good blaster and compressor but it's not been experimented with much cause it's fairly new. I don't shoot much but the few times I did, cleaning them takes hours, just wondering if this would make it much easier.

[@VaporHoningTechnologies]

Yes, Vapor Blasting will clean rust off guns and prepping for coating. At this time, we are working with some firearm channels to get a video about rust and guns but we do have old videos. Please see links below. Feel free to give us a call or email us. We will be glad to answer any questions for you. kzbin.info/www/bejne/aIKshZqBdsShh9U kzbin.info/www/bejne/api2hYJud817h80

[@Meisenheimer1938]

Yes. Any use of bi-carb wet or dry is a superior form of parts cleaning. Of course with wet you need to assure that the parts dry properly. I shoot black powder and I clean my flintlock with hot soapy water after each session. I hadn't considered soda blasting until now, even though I work for a company that has pioneered the process. As for boring (comment by northerniltree) if doing a job (any job) properly, daunts you, why do it? And of course that begs... why complain? oh yes, because you are being: "cool"! Seriously?

[@laserfalcon]

How would this work on a fiberglass body to remove paint?

[@VaporHoningTechnologies]

It may work with garnet as the abrasive o strip the paint but not exactly sure.

[@Meisenheimer1938]

Good question. I'm out to the plant today to do some swing arm cleaning with alox. Ill ask our tech manager about cleaning fiberglass with soda blasting and post an answer back as soon as I find something out.

[@phoenix546]

Soda with strip paint off fiberglass but it won't leave a good profile to reapply your neccessary primers. I run a crushed glass on boat hulls through my dustless blaster. The right pressure can remove the gel coat blisters aswell

[@paky66]

what water pressure?

[@masterofnonetv8361]

I completely disassemble the carbs and use glass beads on the carb body's because it makes them look new. Yeah it's more work cleaning the media but you get a much better look with a fresh clean body and polished parts when they are put back together and put on your bike.

[@anthonyskorner4511]

How do you clean the parts after blasting?

[@murmenaattori6]

Glass beads remove too much detail and round corners.

[@quentinsmith9943]

damn . so we learn new things every day . awesome

[@prawny12009]

i thought soda would just dissolve?

[@ShabaaUkelele]

What's a "wahder", please?

[@eflanagan1921]

from Bah Hahboh ?

[@obfuscated3090]

I've seen their demos at motorcycle rallies and the system works very well. Not cheap, but if you have a business it would quickly pay for itself in time saved.

[@VaporHoningTechnologies]

Thank you Ob Fuscated.

[@paulevans5989]

Do you ship to the United Kingdom?

[@VaporHoningTechnologies]

Absolutely, just email [e-mail] for an accurate shipping quote.

[@rogerstolworthy3040]

Paul Evans you can buy from Machine Mart in the uk but will also need a air compressor at about 4 bar

[@agengsimuk7983]

White soda? Is a soda for cake its same?

[@andysanchez7050]

what is this

[@ps3customgamer]

This seems silly an ultrasonic cleaner will clean the hardened petrol inside and make the exterior gunk fall off. Soda blasting is nice on the outside after that but unnecessary

[@VaporHoningTechnologies]

There are many options out there. Wet Soda Blasting is only 1. Call us if you have an interest in Vapor Honing. 828-202-5563 x 103 Niki

[@kougerat5388]

I'm restoring a bank of 4 Mikuni's which were painted black from new, I have done the ultrasonic cleaning process 3 times so they are minty fresh internally but getting the last traces of the original paint off the outside of them is a real pain and that is where this system would be the only safe answer !

[@MrX-zu2qe]

2 1/2 min to clean that carb what a time saver I have to get one.

[@VaporHoningTechnologies]

+Mr X Call us at [phone] or email [e-mail] for more helpful tricks and tips.

[@adhiejabhrixmerzy3629]

nice..

[@Graters1989]

lol except the floats are bent. hope that wasn't going to a customer. that's not how you treat floats

[@vincevegacustoms8860]

ejgrae1989 5sec to remove as well

[@ClassicTrialsChannel]

he did say it was bought from a swap meet just to show the cleaning

[@VaporHoningTechnologies]

Thank you.

[@obfuscated3090]

Its a fucking demo carb, shithead. FOESAD.

[@Larrabjl]

Or you could just put it in a can of carb dip overnight

[@RedRupert64]

For that I'd rather use an ultrasonic cleaner.

[@VaporHoningTechnologies]

There are many options out there. Wet Soda Blasting is only 1. Call us if you have an interest in Vapor Honing. 828-202-5563 x 103 Niki

[@DumbCarGuy]

So basically you invented water jet cutting.

[@VaporHoningTechnologies]

For more information or to place your Order Today; please contact me at 828-202-5563 x 103 Niki or Email [e-mail]

[@bobgranger2278]

Looks o.k.- shame you wasted your time , because you didn't strip the carb !

[@vwmike333]

Nice. Try not to talk so much. You over state everything.

[@tims317]

how can I get one of those blast nozzles

[@tims317]

how can I get one of those blast nozzles

[@tims317]

how can I get one of those blast nozzles

[@VaporHoningTechnologies]

Tim do you have a Vapor Blasting Unit? If so, which one?