For those wondering, this stand is 50" wide. A 58" Samsung is 51" wide. You can mount up to a 55" Samsung without overlap. This is the best stand you can buy for $149.
@SheOnPurpose2 жыл бұрын
Great job!!! Thanks so much!!! I have a 65 inch and I was thinking about this one but I don’t want mine to overlap…. So thanks so much for the attention to detail in the explanation 👍🏽👍🏽👍🏽👍🏽👍🏽 God bless!! I’m here on Thanksgiving 2021 🍁🍁🍁
@davidc38332 жыл бұрын
I have a 65" I just purchased this tv stand! Only problem is! It's still in the box 😆 wish I could just pay to set it up lol
@sniperghostshooter71612 жыл бұрын
Lol same
@angeljackson64756 ай бұрын
I know this is 2 years later but we’re you able to get it mounted. I’m having that same issue now
@laronzothompson63127 күн бұрын
@@angeljackson6475😂
@DaRTHGTeR3 жыл бұрын
No help bro. The fact that you skipped over the actual mounting of the hooks to the tv just sucks.
@PassportBrosBusinessClass3 жыл бұрын
Read the Goddamn manual
@timi34023 жыл бұрын
@@PassportBrosBusinessClass the attitude was so unnecessary. Would never subscribe to you
@Petwayboy3 жыл бұрын
@@timi3402 on god
@Confidential6193 жыл бұрын
2:08 good to know, because I wasn't sure if my particular tv would fit on that so incase it doesn't I'll just not use that.
@weatherphobia2 жыл бұрын
We had this same design and one night at 3 AM we heard a sound like a cinder block dropped from 10 feet to the hardwood floor. When we looked, it was our LCD TV 36" laying face down onto the hardwood floor. The top glass shelf did not crack or break, but the metal brackets and sections gave way. It's not repairable, I tried, so we decided no more glass TV stands and no more TV stand type device for more than $150-$199.99. YMMV
@PassportBrosBusinessClass2 жыл бұрын
You must’ve made some kind of mistake building it. My mothers stand is still going strong since I made this video building it.
@kingeleven38202 жыл бұрын
How much did your tv weight? Im thinking about getting one these for my 55 tv but it weights 60 lbs im afraid in the long run the glass will break or the tube holding all weight will break the glass from all the pressure
@weatherphobia2 жыл бұрын
@@kingeleven3820 Mine weighed 23 pounds.
@weatherphobia2 жыл бұрын
FORGOT TO ADD: Even during/after the shelf collapse, not a single piece of glass from any shelf broke. I found that to be impossible, but it was true. The metal parts failed.
@MarienMarcus4 жыл бұрын
You skipped the whole presentation!
@kuteshellz4 жыл бұрын
Same thing I said, did the work then video after🤦🏽♀️
@PassportBrosBusinessClass3 жыл бұрын
I think you mistake a Set-up-guide for a REVIEW
@cj24000 Жыл бұрын
Lol
@MoxOpal86 Жыл бұрын
I have a 65 inch on it an it does overlap a little but still looks amazing
@PassportBrosBusinessClass Жыл бұрын
Because of the black bezels, it’s acceptable I think.
@MoxOpal86 Жыл бұрын
@@PassportBrosBusinessClass maybe but the overlapping really isn’t an issue at all the tv sits pretty far back on the stand so it almost looks mounted to the wall so the overlap isn’t really an issue the issue is the sturdiness of a stand that’s the only thing that needs to be looked at first wich this stand is very sturdy
@DarthVader964 Жыл бұрын
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@MoxOpal86 Жыл бұрын
@@DarthVader964 some of them were easy but some were a pain but i got out a little screwdriver and kinda went around the part you push in the hole and pushed them in and worked just fine
@AngelMaySin174 жыл бұрын
My dude sounds like Keith Lee from WWE! Lol but good stuff bro..imma set mine up tonight
@Hsw_wrestling3 жыл бұрын
Bask in his glory!
@jeffhardybaybay27613 жыл бұрын
Yo he kinde does
@joshlayman72172 жыл бұрын
I bought a 50 inch 4k Vizio Smart Cast tv at Walmart and the only tv stands they have is this one.
@ozzieperez2 жыл бұрын
Would a 60” TV be the perfect edge to edge fit? Or is the 55” the perfect fit to not overlap?
@ms.bonillas11253 жыл бұрын
The only part I'm struggling with is mounting the bracket to the TV helllppp
@diannewashington75173 жыл бұрын
I just received mine today. Thank you much for the video, awesome job!!!!!!!!!!!
@DarthVader964 Жыл бұрын
How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well
@MRSEEK100 Жыл бұрын
@@DarthVader964 I know it's probably too late now, but I saw someone using a little bit of soap to slide them in easier
@iZack1874 жыл бұрын
The television looks pretty close to the top shelf... Is it possible to raise the TV even higher than that? I would assume a 65-70" TV would be larger in height
@dbssanchez114 жыл бұрын
yeah there are 4 mounting options for the height of the television, it looks like he has his on the lowest setting. I have my 55 inch on the second lowest setting and it fits a center channel speaker underneath it without issue. Source: I just set up mine.
@destressfrlyf84311 ай бұрын
This was absolutely handy
@FIGHTINGGAMER Жыл бұрын
Does anyone know if you can remove middle shelf I need more room
@PassportBrosBusinessClass Жыл бұрын
No
@JC-bl9bo4 жыл бұрын
Hello I just watched your video, very informative. Even though I'm buying a 75 inch TV I think this will for the bill. The legs are only 25.9 inches apart. And it only weighs 79 pounds. I know it will overlap the sides but I'm ok with that. What do you think?
@PassportBrosBusinessClass4 жыл бұрын
I don’t want too much overlap
@JC-bl9bo4 жыл бұрын
@@PassportBrosBusinessClass Thanks for the reply. I would be ok with the overhang. How easy or hard was it to put together? I am not the best at building stuff but it looked somewhat easy to install. Thanks again for the reply.
@shekilrose10772 жыл бұрын
@@PassportBrosBusinessClass Whalen is a good tv stand for 65 inch tv or 50 inch TVs or 55 inch TVs I have two 65 inch TVs
@lalow89492 жыл бұрын
I just got a 75 inch tv but im having an issue with the tv tilting forward, is it to heavy? Did you have this issue
@JC-bl9bo2 жыл бұрын
@@lalow8949 no, i did not have an issue with the TV leaning forward. What TV is this?
@vernebaptiste6040 Жыл бұрын
Good evening Sir....Do you have any video showing where you attached the two wooden end to the metal frame?
@JoEs_Do99 ай бұрын
Personally, I think the TV should be up higher versus lower to the table
@Stormmaniac11 ай бұрын
Mine came but the middle shelf don't fit bolts properly did you have this issue? I had to buy a drill to make them fit..
@shaydog94823 жыл бұрын
Thanks I was lost tell I seen this got it all ❤ together
@talksportsplustv40612 күн бұрын
Get the stand just mount your 70 inch simple
@lowk5182 жыл бұрын
will this fit with a 32 inch tv? before i go out and buy a bigger tv just for this stand i want to make sure if i can just keep my 32 inch.
@RavenHutchens2 ай бұрын
Yes but you skipped the whole process. We didn't get a book with ours.. I was looking for a step by step 😢
@PassportBrosBusinessClass2 ай бұрын
@@RavenHutchens Review is not the same thing as unboxing and assembly
@thatssoe12693 жыл бұрын
I’m glad that you upload this video, because I’m a woman. & I like to see videos that could help. I’m a visual person lol so thank you so much for this video.
@Mexihoney172 жыл бұрын
“2 man job my ass, who needs a man these days” 😥😌😌😌
@PassportBrosBusinessClass2 жыл бұрын
And you came to a Man’s KZbin channel for INSTRUCTIONS 😂
@Mexihoney172 жыл бұрын
Bigtruckseriesreview Motorsports I came to see if it was really a two man job LMAO
@crimsonguardian3412 жыл бұрын
But how would you take off the angle bars if you want to change out your TV? Please help ?
@y2k_cage8 Жыл бұрын
I have no clue if you will respond but did you have to put in the black fittings inside the tv? Or no? Because I have my 65” but the spacers that’s supposed to go inside out to big so wondering if you used them or just screwed in the bolt that fits
@PassportBrosBusinessClass Жыл бұрын
Different TV have different fitting requirements.
@charlotteespenido-pledger63343 жыл бұрын
What screw did u use to mount the tv
@Itscjayjames Жыл бұрын
My tv keeps leaning forward which I don’t like. Any help?
@jennyjones93782 жыл бұрын
U can adjusted the shelfs
@Steviewonderwhy Жыл бұрын
Did you use a restraint strap on tv? To prevent tip over? I don’t feel like using mine
@PassportBrosBusinessClass Жыл бұрын
The TV, as you can see sits away from the wall. a Restraint isn't necessary and we've had NO issues.
@mahoganywalker51222 жыл бұрын
Dude I feel so cheated i paid 180 but it was worth it thanks for the vid
@victoriapennington16612 жыл бұрын
My problem is HOW to get the bottom screw in the brackets on TV. The hook covers the bottom hole for screw.Help!!!
@dajourlivingston2710 ай бұрын
That is to much work. I use the counter top
@Diana-uk8ql2 жыл бұрын
Good on you getting it set up Mines was just not working. The middle shelf was way off. Had to return. :(
@supermanx87112 жыл бұрын
That was because which of the 3 holes you use depends on which height of the middle shelf you chose to place it.
@sheilawhite78943 жыл бұрын
Thankyou you are a big help.
@akyawilk11 Жыл бұрын
Is the spine supposed to lean forward? I don’t know 🤷🏾♀️ if mine is put together correctly bc the spine leans forward a bit.
@PassportBrosBusinessClass Жыл бұрын
No
@truthtimetv45753 жыл бұрын
Sounds like a sketch on key and peele. One of peele voices little bit lol
@XxJuNiOrxX7143 жыл бұрын
Just finished assembling mine. It’s a really sturdy stand. I was really skeptical of how it would hold my 65” but it worked out well. Had a bit of trouble setting up the mounts to the tv since there aren’t really any videos specifying on how to do it plus the instructions aren’t really clear for that part. Overall it’s a really nice stand. Very satisfied. Just hope I assembled and mounted it correctly. Hopefully there aren’t any complications in the near future 😅
@RealestKhalil3 жыл бұрын
How did you get the spine to stand up straight & not leaning? Mine spine arrived yesterday & was confused why it was leaning forward & the bottom part is tight.
@XxJuNiOrxX7143 жыл бұрын
@@RealestKhalil just make sure everything is facing in the right direction, when I thought I had finished assembling mine I double checked everything and I still had to take a few things apart to make them face how they were supposed to. The spine was straight and sturdy when it was assembled I didn’t have any problems with it, if it is leaning im not sure why but like I said just double check everything and also make sure you add and tighten the hardware exactly how it is supposed to.
@RealestKhalil3 жыл бұрын
@@XxJuNiOrxX714 wish I could take a pic & post it on here
@ronaldhernandez60653 жыл бұрын
@@RealestKhalil hey man did you find a solution to the leaning part just set mine up and having the same problem I have a 65 inch tv too and I’m having the leaning problem of the tv as well
@Avazquez923 жыл бұрын
@@ronaldhernandez6065 I’m having this same issue I had to redo it just in case I did something wrong but the spine still leaned forward
@NICKMICKGames2 жыл бұрын
I'm having issues with screwing in the bottom part of the bracket pieces LR&LL on the back of my 50 inch tv. Are the spacers supposed to fit into the hole? The spacers I received don't fit into the hole.
@misspink543213 ай бұрын
I’m super late to the party, but did you ever figure this out? Having the same issue right now.
@kentrell8174 Жыл бұрын
You sound like druski
@prxncevino82263 жыл бұрын
Does it lift the TV up and down?
@kevoggtm91624 жыл бұрын
where can i get the brackets i be tryin to find them for so long
@Redsfreak193 жыл бұрын
They're in a box within the box. My swivel joint was taped to the outside of the box.
@JasonLee-t3b2 ай бұрын
Mounted my 70” and it hangs over maybe 2” each side and very sturdy! 70” fits great listen to the manufacturer
@makavelithedon23694 жыл бұрын
Hello, My tv keeps tilting. Any suggestions?
@PassportBrosBusinessClass4 жыл бұрын
Tighten the swivel
@Phoenix-Rising43 жыл бұрын
I had my 55 in on it but upgraded to a 65 in,so I excited and scared to put it on there 🤣🤣 but why did you skip the part the part where you put the bracket on the tv?
@brandenwatkins19883 жыл бұрын
Did you mount it on the wall or stand?
@ms.rolltide2563 жыл бұрын
I bought this last nite for my new 65 inch I bought last nite to watch Alabama play and Bama beat Fury 🙄 saying all of this to say I put it together but had to watch my tv on my floor because the brackets wouldn’t mount to my tv the Vizio 65 inch ugh
@joanimal_18 ай бұрын
Mine won’t tilt! How did you get yours to TILT? Mine will swivel but won’t tilt. Even when I loosen the twist knobs. Won’t tilt
@simmikaur1800 Жыл бұрын
Can you tell me how to fix tv position up to down and down to up. My daughter changed the position. My tv is all the way down . I don’t know how to fix it
@jaymenplan4677 Жыл бұрын
How did you guys figure out what size screws to use for the brackets?
@PassportBrosBusinessClass6 ай бұрын
trial and error
@Man0War_Loki Жыл бұрын
Ok needed to see how much gap the tv was from the glass.. I have this stand but got a larger tv. I'll have to find a workaround. Like the stand too much to get another one
@RealestKhalil3 жыл бұрын
I brought mine yesterday for some reason the spine part keeps leaning forward I dont know you gotten it to stand up straight
@PassportBrosBusinessClass3 жыл бұрын
That shouldn't happen. Are you sure you tightened it correctly?
@RealestKhalil3 жыл бұрын
@@PassportBrosBusinessClass I'm pretty sure I did I spent all day yesterday trying to make the spine straight only thing it does just leans forward.
@Diana-uk8ql2 жыл бұрын
Oh so it’s not just mines that does that. Ended up just taking it apart and requested a refund and return.
@desarae41283 жыл бұрын
how do you tilt the tv forward? my stand isn’t tilting
@PassportBrosBusinessClass3 жыл бұрын
loosen the tilt lever.
@truexreclaimer4 жыл бұрын
Thanks for an honest and straightforward review! Going to buy this for my 55' Samsung
@jessicafletcher69623 жыл бұрын
What size bolts did you use for the brackets at the back of the tv? I’m having trouble mounting mine in the spine
@PassportBrosBusinessClass3 жыл бұрын
Everything I used came in the package. I think I tested 2 sets till I came up with the right size.
@jamescole12349 ай бұрын
Think u sir just got my today it looks awesome can wait to get together for my 58 in tv
@philiplopez43832 жыл бұрын
I just got this a few days ago and when I tried setting up the middle part one of the screws wouldn't go in all the way even though it was the right one
@meowmixes98 Жыл бұрын
Can someone bump it off?
@PassportBrosBusinessClass Жыл бұрын
There's no protection from the sides, back or front.
@henrymartinez68942 жыл бұрын
You should've started from beginning you have the frame practically done that was dumb for those who don't know
@PassportBrosBusinessClass2 жыл бұрын
When you clicked the video, did it say “assembly” or did it say “review”? Learn to fucking read Thanks for the views!!!
@alyssaponce89403 жыл бұрын
My spine was really wobbly and didn’t stand up
@RealestKhalil3 жыл бұрын
Same I brought mine & received it yet. Put it together & noticed the spine was leaning forward instead of straight.
@joedanielgonzales48558 ай бұрын
What size of tv is that
@PassportBrosBusinessClass8 ай бұрын
55”
@EricaMadden-y5h11 ай бұрын
I had to remove tv because I moved. How do I put it back on.
@sarahskies35686 ай бұрын
Getting mine on monday, can't wait to get it!
@willetthercrosby8717 Жыл бұрын
Y is my tv tilted
@marquesterry35853 жыл бұрын
I have no idea which screw to use to place on the back my TV to mount to the stand. Confused is not even the word lol
@AlbireoOkami3 жыл бұрын
What Vesa standards does this stand work with? I can't find this info anywhere.
@PassportBrosBusinessClass3 жыл бұрын
It’s pretty much universal.
@AlbireoOkami3 жыл бұрын
@@PassportBrosBusinessClass any way you can confirm i can mount a 200 x 200 vesa standard? I'm worried there is not enough gap to mount the TV center. About 6.5 inches between mounting bars
@CRE8LSM3 жыл бұрын
does anyone know where I would get a replacement for the wall mount? all the wall mounts online are only for well... walls. cannot find any that wrap around the pole of the tv stand... I really need one
@leahdavis91332 жыл бұрын
I have the same model assembled myself struggling with a tilt issue tv falls forward …
@onelovejamaica66823 жыл бұрын
My middle glass won’t sit on suction
@phillipmedina9877 Жыл бұрын
Kinda nervous to let it lean forward without it being attached to a wall, I have a 65 in, any suggestions?
@DarthVader964 Жыл бұрын
How did you put the suction cups in on the bars? It's literally impossible without melting the suction cups with a lighter
@PassportBrosBusinessClass Жыл бұрын
I pinched em. Didn't have a problem.
@Bingas_3 жыл бұрын
I can’t get the suction cups into the holes for the shelves...any tips pls??
@PassportBrosBusinessClass3 жыл бұрын
Push them with thumb force
@trishcook50023 жыл бұрын
Forehead sweat on the part that goes in the hole! Bam! They go right in.
@gftgrtrtyrty3 жыл бұрын
Does this set up tilt from left to right?
@PassportBrosBusinessClass2 жыл бұрын
yes
@Quayb243 жыл бұрын
Mine is tipping over and we have a 65 inch
@shatterst0rm3803 жыл бұрын
Thanks for doing this!
@shekilrose10773 жыл бұрын
I have this exact tv stand you can adjust the tv stand too extend too come out some more I have a 65 inch tv
@ChrisM0D3 жыл бұрын
Do you know if this can support a 65in Curve TV??
@Redsfreak193 жыл бұрын
The instructions say that it can. Slightly different bracketing procedures though.
@169Aquarius4 жыл бұрын
Mines didn’t come with mount how can buy the mount
@kathyscarlett98654 жыл бұрын
How can I buy the Bracket
@aaronramen59263 жыл бұрын
Wait, so this doesn’t have to be mounted on the wall?
@PassportBrosBusinessClass3 жыл бұрын
no
@earlona3 жыл бұрын
Nope..3 in 1
@earlona3 жыл бұрын
Mine is mounted on post in middle and it swivels..sturdy all round..very pleased
@derianparker58292 жыл бұрын
You didn’t show the actual mount ☠️
@CortaineyWright4 ай бұрын
😊
@jonsnow14358 ай бұрын
I am planning to move, can we remove those glasses from the rack?
@PassportBrosBusinessClass8 ай бұрын
Yes
@kadebeam12773 жыл бұрын
Anyone tell you that you sound just like Seth Roger?? Gosh I thought it was him
@kadebeam12773 жыл бұрын
Rogen*
@vanessawingfield5791 Жыл бұрын
The screws are the short for my 55 inch
@cscox132 жыл бұрын
I need to start from scratch 😩 😫 😭
@earlona3 жыл бұрын
It holds my 70 inch perfectly
@Quayb243 жыл бұрын
How did you get not to lean because mine leans forward and we don’t know what to do.
@BuGu162 жыл бұрын
@@Quayb24 me too it’s so annoying it kept leaning forward so I didn’t use it . I’m scare I’ll damage my tv
@Quayb242 жыл бұрын
@@BuGu16 mine still leans but it hasn’t fallen or anything so I guess we’re good. I think it’s just the weight of the TV
@mmll252 жыл бұрын
got it discounted at 77USD, couldnt say no to that price
@strasburgboy Жыл бұрын
Thank you very much!! Great video!
@kingeleven38202 жыл бұрын
Can this hold a 60 lbs tv with the tv mount?
@sumbl1ss3 жыл бұрын
It says it swivels.. didn’t see that :(
@Unkn0wn4503 жыл бұрын
Thank you for this video! Very informative. I know this was posted couple months ago but if you see this.. Do you know the true dimensions? I plan to buy this but I want to make sure the height is tall enough and the width is wide enough for my needs.
@bighp26122 жыл бұрын
Skipped the part I needed to see lol I lost my instructions
@PassportBrosBusinessClass2 жыл бұрын
I can’t believe people have so much issue assembling this. It’s mostly obvious
@LB-lx8iq3 жыл бұрын
Can you put a gaming monitor aoc 34 in g2 series on that mount?
@Omegaghostpanda2 жыл бұрын
My spine is at an angle for some reason. I've redone it multiple times and it's still at an angle
@PassportBrosBusinessClass2 жыл бұрын
Is it bent?
@Omegaghostpanda2 жыл бұрын
@@PassportBrosBusinessClass nah it doesn't seem to be bent just the whole spine goes at an angle once fully assembled
@JohnAranita3 жыл бұрын
The instructions say that if you have difficulty installing the suction cups to use the provided hex wrench. That took a long time. I used the side of a wrench to pressure the suction cups through the metal shelves. That worked super fast!!!
@trishcook50023 жыл бұрын
After struggling putting 1/2 of them in, I used my forehead sweat on the suction cup nubbings & they just popped in after that! 😆 Works great!
@Vanessa479123 жыл бұрын
I had to use one of the smallest screw drivers in my tool set to help guide the lip of the suction cup in....worked like a charm! I used the 2.5x40mm screw driver.
@Jesus-cx2tq2 жыл бұрын
Can this hold a 65inch qled Samsung tv?
@PassportBrosBusinessClass2 жыл бұрын
Yes
@anerisa12762 жыл бұрын
My mirror is sliding on mine. Have an idea why?
@PassportBrosBusinessClass2 жыл бұрын
you installed it wrong?
@anerisa12762 жыл бұрын
@@PassportBrosBusinessClass I don’t think so. The top and bottom one are in place but the middle isn’t