Hi Bro, is it ok to use ply itself instead of profile handles? Which one is a better option considering strength and durability
@trishnadesign2 ай бұрын
Both are good, profile shutters will look more premium & cost will also increase.
@trishnadesign2 ай бұрын
For very less maintenance ply would be best
@fakhruddinmalura9 ай бұрын
Pls explain on price variation - 900 to 3000, is it per ft or per 10ft or per meter??
@Vinay_Acharya2 жыл бұрын
Achha bataya hai 👌👍😊 Thank you.
@geetav2993 Жыл бұрын
How long does the powder coating last on g handles . is anodisation lasts longer
@trishnadesign Жыл бұрын
The powder coat will last for 3-4 yrs, but if you are washing it regularly then it's tough. Anodizing its better than coating
@umamahesh34132 жыл бұрын
Very informative video bro. J profile ke koi disadvantages bhi hai kya? Please suggest Kare ki G aur J me kaun sa better rahega
@trishnadesign2 жыл бұрын
As such there are no positive and negative its actually depends on the design , which means according to your concept it will matters.
@Vinay_Acharya2 жыл бұрын
Let me explain in simple words. In G profile, the grip is opposite side of the groove in ply. Usually used in kitchen cabinets & lofts. In J profile, the grip & groove is on the same side. Usually used for pull-out drawers like cupboards. If you want lift & pull effect (pressure applied by you is towards the sky) use G profile. If you want press & pull effect (pressure applied is towards the ground) use J profile.
@nandkishorpatle3725 Жыл бұрын
sir muze CNR company ka G-profile handle 2080 ka ek 10ft ka pada ,, sahi rate me mila ya mahanga mila sir
@trishnadesign Жыл бұрын
It's Proper
@patilashwini2252 жыл бұрын
Can u pls tell me the color coad of that light peach colour near photo frame and also the colour used on wall behind u
@vaishalisapahia8205 Жыл бұрын
Black powder coating handles ki niklti toh nhi hai kuch time k baad??
@trishnadesign Жыл бұрын
Yes, Nikalti hai... But if it is PVD coating then it doesn't fade..
@abhinavsharma22123 жыл бұрын
informative video.. nice
@deepalirawat5567 Жыл бұрын
Kya HDHMR MAI YE profile handle lag sakte hai
@trishnadesign Жыл бұрын
Yes..
@garrysingh33378 ай бұрын
Q1. Can we keep 6mm ply for bottom of wardrobe drawer? And 18mm for side where channel will be added. Q2. Can we apply profile section handle only in the middle of top of wardrobe drawer? I don’t want it for full width of drawer like we do for kitchen. Q3. What kind of cater wheels tyres would be good for wardrobe that is rarely moved? Q3. Is there any compromise on strength of shutter or drawer if we use concealed handle?
@trishnadesign8 ай бұрын
1. No for safer side 12mm is must 2.yes 3.caster, or any buffer will do
@shailjamishra80702 жыл бұрын
actully it will be done with in next two day s kindly answer me
@trishnadesign2 жыл бұрын
I guess we are late to reply.
@interiordesignersinmumbai6342 жыл бұрын
Great information
@kaajalmelwani55942 жыл бұрын
Any complaints on g handle.. do they come out due to water. I had a bad experience with these in one of my rental property
@trishnadesign2 жыл бұрын
I guess they have not been installed properly... There is as such no complaint but the corners of the g-profile are sharp, and might get hurt in fast use.
@Publicchannel5 Жыл бұрын
@@trishnadesign Hi,There will be side caps to handle sharp edges.
@trishnadesign Жыл бұрын
@@Publicchannel5 yes you are right
@mamatamundaye46752 жыл бұрын
Nice one
@trishnadesign2 жыл бұрын
Thanks 🔥
@anithaparupalli78572 жыл бұрын
Hi which brand is better in profile handles
@trishnadesign2 жыл бұрын
As such there are no brands in it. Which are known
@shailjamishra80702 жыл бұрын
brother can I use it for kitchen cabinates if yes then how?
@trishnadesign2 жыл бұрын
Yes you can use it.
@shailjamishra80702 жыл бұрын
i didn't get in hefflr or hettich,i got ebco brand but it is good n heavy in gauge
@shailjamishra80702 жыл бұрын
Do u know about ebco
@trishnadesign2 жыл бұрын
@@shailjamishra8070 Yes its nice..brand
@Vinay_Acharya2 жыл бұрын
@@shailjamishra8070 Ebco is a good branded product 👌
@explorewithsimpa322 жыл бұрын
Nice informative
@trishnadesign2 жыл бұрын
Thank you so much
@dodiyairsad1647 Жыл бұрын
👍👍👍
@anilvishwakarma2424 Жыл бұрын
J sef porofail hendal kese lagaye
@trishnadesign Жыл бұрын
Same procedure hai...aap ko upar se lagana padega drawer ke.
@radhika.shinganapurkar Жыл бұрын
J type handle video please
@trishnadesign Жыл бұрын
sure
@sunilnichite13112 жыл бұрын
Kya j profile me end cap aata he
@trishnadesign2 жыл бұрын
yes
@adyannariyam5845 Жыл бұрын
Sir g profile fix hogaya hai edges sharp Hain to ab iska solution batain.
@trishnadesign Жыл бұрын
Edges will remain sharp, you need to take care. You can reduce it by polishing
@ghemersinghsolankijaisalmer2 жыл бұрын
J hendel fix kese karna
@trishnadesign2 жыл бұрын
just give a groove on the facia
@vickydahiya12 жыл бұрын
G profile ke corners sharp hai ..what to do about them
@trishnadesign2 жыл бұрын
Need to polish before purchasing (both sides)
@Vinay_Acharya2 жыл бұрын
Corners ke liye caps aate hai jo finishing degi. Sirf profile nahi lagate hai. Saat mei corner caps bhi dete hai hardware waale.