Get an E&L. Who cares how shit the internals are? All you're buying is beautiful wood and steel
@MagnustheJust7 ай бұрын
I am at the point, where using the knowledge (and sarcasm 😘) I have learned here, I buy boneyard replicas l like the externals of. Then l crack it open, dump out the gearbox, and go from there. My most recent one, is a JG G36, that is so quiet, the players next to me cannot hear it fire.
@Greendore7 ай бұрын
My double bell SR25, very good price for a base project, externally it feels very good and you actually get the 2.5 gearbox unlike the G&G which costs double the price!
@NegativeAirsoftTech7 ай бұрын
I'm going to sell one I have here if the dude doesn't pay his bill....
@seanmccann16917 ай бұрын
I just bought the sr25 I bought a kythera from a thrift store for $9.99 and saw this video when it came out saw how good the externals are and evike had them on sale for $212 + the $20 discount code just had to do it.then... watched astkilo's review and he gave the sr25 a 1/10 now I'm scared I hope I don't get a lemon like he did
@Greendore7 ай бұрын
@@seanmccann1691 You'll need to either replace the sector gear or cut down the cylinder to stop it being hit by stock sector gear, apparently all double bell V2's have this issue
@NegativeAirsoftTech7 ай бұрын
@@Greendore not all, some. I've had it once.
@Greendore7 ай бұрын
@@NegativeAirsoftTech Is it the stock sector gear causing the issue? I replaced the stock gears for SHS and as far as I'm aware, my guns been fine.
@hyperslow556gungamer7 ай бұрын
If using Threadlock for motor height screw: apply half droplet to threads of adjustment screw. Using non-absorbing material spread the very small amount of Threadlock each direction. It does not have to go all the way around adjustment screw. Let dry without installation. Once dry, install. This will keep the screw from vibrating out, but will allow easy removal with a screw driver. Don't stab yourself with the screwdriver.
@NegativeAirsoftTech7 ай бұрын
ERM.... *scoff scoff snort scoff... you need 57% of a droplet NOT! 50% of a droplet *scoff scoff... You're doing it wrong... *heavy mouth breather sounds & that's in fluid ounces not mils *scoff snort
@TheBrotherPrime7 ай бұрын
This comment is the universe mocking me after I have just stabbed my hand with a screwdriver after trying to remove someone's green threadlocker motor height screw
@Historyrevenge7777 ай бұрын
28 days later haunting music
@whocanmakeyourwholeweek72727 ай бұрын
wasnt sure if it was 28 days, or 28 weeks later. ive got the soundtrack but its been a while ( great to listen if you dabble with shrooms).
@Historyrevenge7777 ай бұрын
@@whocanmakeyourwholeweek7272 deffo days I'll never forget the first time hearing it
@alexismarilyn7 ай бұрын
Meal-team Six who think they’re in the army be like Regular M4: wow so boring, very generic and American. Regular M4 with L119A2 on the box: YAS QUEEN.
@MercutioUK20067 ай бұрын
Meal-Team Six 🤣 Good point, well made.
@felinor6937 ай бұрын
AK guys are the exact same way lel
@Debbiebabe694 ай бұрын
Meal team Six ;)
@jorgeemidio75077 ай бұрын
There is no doubt that some companies just squeeze the most out of any external modification if you can call it "modernization".
@konstancemakjaveli7 ай бұрын
You claimed handguards on aliexpress. Any link? I would like to find one bcuz i havent been able to on Ali.
@offender07 ай бұрын
Aliexpress had a lot of their airsoft stuff nuked sadly. There used to be a couple of really good stores on there but from what I can find there's only one; "AEG Handguard Store" but they don't have an L119A2 handguard. I'd love to get my hands on one too.
@grannynigel7 ай бұрын
I’ve had 2 Double Bells and they’ve both been fantastic. Ran my Mk12 Mod 0 yesterday (DMR’d out - granted its only got a V2 not a V2.5) and literally everyone was admiring the rifle. Rock solid. £110 + a bit of work and its launching 0.45g BBs a very long way. Some of the most fun I’ve had in a long time.
@Thanas907 ай бұрын
now im got Mk12 mod 1 my personal project .. retroarms GB shell ... on table :P ... for that price why not when nobody in real price sell it ..
@PopeLeo7 ай бұрын
They should make an RSASS instead, quite similar, and it's not a shotgun
@charlie917577 ай бұрын
they would make great hpa's
@fusi0nn7 ай бұрын
I noticed this too a while back. Im glad you are pointing it out so others can take advantage and customize their guns themselves without breaking the bank.
@planetcaravan29257 ай бұрын
The music is too loud..
@eojii7 ай бұрын
hearing a godspeed you black emperor song was a very pleasant surprise.
@eargesplitten98767 ай бұрын
Proving that Luke was another mid-'00s metalhead hiding a love for post-rock.
@Brother-Crow7 ай бұрын
28 days later music hits hard
@eargesplitten98767 ай бұрын
Fucking 15 years later I find out that I wasn't hearing things and that GY!BE *was* in 28 Days Later.
@ReapingRose1157 ай бұрын
Have a Double Bell M16A4 It's pretty good, got it for about £160 at the time. Was after an M16A4 on the cheap and for some reason Cyma ones weren't in stock in most places. Took a gamble, but it was worth the purchase.
@seanmccann16917 ай бұрын
So In the US I was only able to find 1 place that sells the tt gen12 it was $200 and evike sells the cheaper m4 for $152 honestly for $48 more dollars I would rather get the tt gen12
@AidanMyne7 ай бұрын
I personally prefer if airsoft manufacturers didn't put ETUs in the gun or just used basic in line mosfets. Maybe i need to get over myself but i find it hard to trust any airsoft gun manufacturer to not scrimp on electronics.
@iammrbadguy97067 ай бұрын
So people complain that a shotgun, that can shoot slugs, shoots a single shot. Yet when a shotgun does fire 3 shots (tm aa12) they complain about range. How about no. How about we like nice things. That being said I do like High Capas.
@FelixstoweFoamForge7 ай бұрын
Double the price, same internals and performance? People are bloody idiots.
@MercutioUK20067 ай бұрын
I'm still staggered by what you can actually purchase for your money these days....regardless of the outer accouterments. Epic.
@paddywagon65427 ай бұрын
It is so insane how good these cheaper aegs are nowdays. I bought S&T ump9 from taiwangun for about 170 € and it has even etu with very good internals. Like 10 years ago it was normal to change parts here and there with cheaper aegs.
@Jamsandwich4u7 ай бұрын
Ah shit. I heard that GYBE guitar begin to kick in and stopped listening to you.
@larryk19787 ай бұрын
Where can you buy the Gen 12 Dracaris??? I want one!!
@whocanmakeyourwholeweek72727 ай бұрын
not airsoft related, but is that music from the film '28 weeks later'?
@Sab_Was_Taken7 ай бұрын
What is your opinion on the WE deagle?
@AdamHoy817 ай бұрын
Top info mate 👌 Thanks for the vid and keep up the great work 👍
@fubene54957 ай бұрын
All DB have same internals, steel gears, steel bearings, dual o-ring aluminun piston head that doesnt fuck up the airseal, with bearings full rack steel piston, aluminun nozzle with o-ring, QD spring guide with bearings, bolt open feature, motor tower with bearings.... The only thing i dont like is the wiring and the hop up chamber, easy fix.
@NegativeAirsoftTech7 ай бұрын
Eh.... the chamber is better than most standard hop units aside from the g2 rotary
@46templar7 ай бұрын
Luke ive kust brought a 2nd hamd Thompson and have you done any work on them as im hoping i can send it down to you soon
@NegativeAirsoftTech7 ай бұрын
Yeah, loads
@ImGoingSpace7 ай бұрын
werent those Dboys PDWs like £80-90 originally
@NegativeAirsoftTech7 ай бұрын
Yup.... Back in 2012
@darkshock42mlg057 ай бұрын
One thing I noticed while looking at $100 real steel optics vs airsoft optics while looking for a good hunting scope. Im not using an air rifle scope the size of a baby's dick on a bolt action or dmr. I want my gun to look correct. I noticed price ≠ quality. In airsoft anything goes. I can get a gun that's better than an ares for cheaper and easy to fix. My de was 250 with an eshooter kestrel pre installed. Never had an issue and of course it's going to work. They don't make that one anymore. Unfortunately I think it was a limited run but they still make the exact same gun with the falcon etu in it $200. Ares is $300. Only argument for ares is externals but same with g&p who has absolute fairy magic externals and no proprietary parts. Same with LCT and VFC. In fact I'd ironically buy a g&p m14 to hpa it. You need the volume to hop heavy ammo. Undervoulumed guns will have power dropoff even without the hopup set. As regular aeg's. Except VFC although only shooting Marui power in the UK, the performance leaves a lot to be desired. Vfc's are some of the best ootb but LCT and g&p are no better than a cyma or g&g raider 2.0. not even the 2.0e. don't know why everyone is starting with the gen 1 when the gen 2 is $10 more.
@pablo-xf3jb7 ай бұрын
that thread lock
@badinfluencegreece7 ай бұрын
nice video mate!
@basserben897 ай бұрын
Hey, Luke - thanks for the vids! Been an awesome learning journey for me. Do you normally recommend bonding your racks to the pistons? Got a favorite adhesive?
@NegativeAirsoftTech7 ай бұрын
Pointless task, a decent piston has no movement on the rack - if it needs gluing is probably crap.
@basserben897 ай бұрын
You, sir, are fast on the bench AND the keyboard. Thanks!
@grimsurvivor23947 ай бұрын
I own a Double bell scar H its good fun but its very wobbly otherwise brilliant base pew. Imagine with upgrades and love it would excell.
@NegativeAirsoftTech7 ай бұрын
Hate scars
@grimsurvivor23947 ай бұрын
🤣 Fair enough bud.
@AidanMyne7 ай бұрын
Yeeeah Boyiiiii
@pappy3677 ай бұрын
i really wish i could get you to pimp the hell out of my G&G m14 but i am here in the states
@NegativeAirsoftTech7 ай бұрын
Shit platform too ..
@pappy3677 ай бұрын
@@NegativeAirsoftTech that is why I need you lol
@m1a1abramstank497 ай бұрын
For a full length Cyma M14 with an M115 spring, should I use a 455 6.02mm inner barrel in it? Or is it too short for the outer barrel? Would a 510mm inner barrel work or would it be too short?
@Greendore7 ай бұрын
Cyma full size M14's inner barrels are 500mm. You could use a 550mm and it'll be just at the end of the flash hider, but I would stick with a 500mm.
@m1a1abramstank497 ай бұрын
@@Greendore The inner barrel is like 550 on my Cyma, not 500
@Greendore7 ай бұрын
@@m1a1abramstank49 That seems really long, does it stop at the end of the flash hider? My full length M14 EBR was 500mm
@m1a1abramstank497 ай бұрын
@@Greendore This is the “wood stock” M14, not the EBR.
@PopeLeo7 ай бұрын
If you wanted the L119a2, the time it would take you to source all the extra parts, sell your old parts, fit all the parts, buy tools to fit the parts if you don't have them, or to pay for labour and wait for someone else to fit them if you don't have the skills to do it yourself, and have the risk that the aftermarket parts aren't the best quality/ don't fit, it's probably worth to just to spend the extra £125
@NegativeAirsoftTech7 ай бұрын
Unless you do have the time & skills. Horses for courses
@clockwork69667 ай бұрын
125? damn, whats the name of it again?
@NegativeAirsoftTech7 ай бұрын
Nuprol G36
@clockwork69667 ай бұрын
@@NegativeAirsoftTech the finest, for the best
@derekporter667 ай бұрын
are JG still around?
@joelm55097 ай бұрын
Somewhat yea
@NegativeAirsoftTech7 ай бұрын
Very much so @@joelm5509
@matts22087 ай бұрын
Yes they are now double eagle and golden eagle. Great value you for your money. I would taken a golden eagle over a cyma any day.
@matts22087 ай бұрын
Double eagle also makes a optical mosfet called the falcon. You get the snappy trigger like the perrun but you do not get all the extra bells and whistles. The double eagle falcon will only cost you $30 though. Amazing value
@gunsmoke1327 ай бұрын
TM aegs aren't worth the price. There I said it. Maybe their ngrs, never used one of them, but normal aegs, not worth it. And I'll go as far as to say neither are the majority of their gbbs