What did they do with this guitar?

Рет қаралды 19,666

Tadyka Guitars

Күн бұрын

Пікірлер: 63

@TadykaGuitars 3 ай бұрын

I bet that it is not the last one 🙃 What you think about video? 😊

@rickperrotta 3 ай бұрын

I thought the video was great! Exposes the problem and a competent repair.

@TadykaGuitars 3 ай бұрын

@@rickperrotta thank you!

@markfogleman8438 3 ай бұрын

Happy to see that the electricity was available for the work. Nice restoration work! Please stay safe.

@TadykaGuitars 3 ай бұрын

@@markfogleman8438 thank you!

@TadykaGuitars 2 ай бұрын

@@игорьгоголев-х5е а ти вже вмер? 😊

@andyn5379 12 күн бұрын

This is now my favorite ASMR channel

@presto111man 2 ай бұрын

I had that exact thing happen- but when I would clamp one side the other would spring out. I had to end up gluing the top with CYA glue, and only work in 2 inch sections until it dried. That way I could control it and ensure a previously glued area didn't shift out of control. You did a great job.

@MrProfgalax 3 ай бұрын

Hello, my name is Eduardo and I am a luthier from Argentina.Great job. I really enjoyed watching the video. Greetings from Argentina.

@TadykaGuitars 3 ай бұрын

@@MrProfgalax thank you!

@tomk1tl39 Ай бұрын

Ooops . . . again 👍 👍 . . . outstanding job and best of luck to y'all there 😎

@blandest4788 3 ай бұрын

Great video! And what a lovely instrument 🎸...

@TadykaGuitars 3 ай бұрын

Thank you!

@johnnygrind77 3 ай бұрын

It makes me very happy when i see new videos from you and Tanya. Peace and love from the USA to you and your families and friends and all of Ukraine!

@TadykaGuitars 3 ай бұрын

@@johnnygrind77 thank you!

@SparrowStockwell 24 күн бұрын

Excellent work!

@StanleyBouchard Ай бұрын

Merveilleux ! J'aime votre soucis du détail ! Bravo!

@TadykaGuitars Ай бұрын

Thank you!

@scottreeves1226 3 ай бұрын

Beautiful craftsmanship. This D-28 lives to sing again!

@rickperrotta 3 ай бұрын

I own two Martin's a D-28 and a D-41, both were purchased new around the same time in 1990. Both guitars have had their binding separate just like this. I've never seen this happen on any of my other guitars. I contacted Martin and they told me they were too busy to take my guitars in and referred me to the factory authorized repair shop. The factory authorized repair guy said he might be able to get around to it in three to four months. He said he had 20 Martin's in his shop with the exact same problem. I'm sure Martin must have experimented with an unproven "new" adhesive and is now suffering the consequences. In any case you would think that a company that had been building guitars for that long would not get caught with their pants down! I feel that Martin has lost its way and not the company we once knew. Ordered a Collings, time to move on.

@TadykaGuitars 3 ай бұрын

@@rickperrotta this thing with bindings is wild 🙃 I think this is combo of bad choice of glue (it was all gummy) and celluloid binding. But this Martin was laying in bad environment for about couple years, and then someone tried to fix it himself. This was not good at all

@GEKO1200 2 ай бұрын

Absolutely! Big brands don’t care about customers issues, not even if you expose the problem to the world community. Realy it’s time to get educate and move to oder brands that simply cares about product, people and gives you a REAL lifetime warranty.

@dirkjanklijn9949 2 ай бұрын

As so many other brands they try to cut corners and ask top prizes, so in the end you just pay for the name, so many "cheaper" brands do not have these problems and for people without perfect hearing they all sound the same as I experienced when I played my Sigma DR28 against a Martin D28 in a shop with really good musicians, we blinded the headstocks and no one could hear or feel the difference. Ended up selling the Sigma because I felt both Martin and the Sigma were in fact verry inunteresting guitars soundwise for me and after playing a good deal of expensive Martins I now know these are not my guitars.

@danibasauri01 3 ай бұрын

Great job! A good amount of TLC for that guitar 👌🏻

@zapa1pnt 3 ай бұрын

Nice job. You and Tanya do really great work. Thank you, for listing what you use. I was curious about the glue, for the binding. 😁✌🖖

@stu-j 3 ай бұрын

Great work and don't worry about your playing! When I first started repairs and setups 35+ years ago I could only play 3 chords! Remember Leo fender couldn't play guitar

@TadykaGuitars 3 ай бұрын

Thank you 😊

@ojeffnoyoutube 3 ай бұрын

great video as always

@TadykaGuitars 3 ай бұрын

@@ojeffnoyoutube thank you!

@TheGuitarsquatch 2 ай бұрын

I saw a video on Martin's Facebook page, and in it, one of the builders was using a bottle of Elmer's glue for the binding. I don't know if that's the reason for this prevalent issue, but it doesn't seem like a coincidence

@Michael-bm8hi 3 ай бұрын

To my knowledge Martin had around 2014 issues with a certain batch of glue. The repair should be covered by Martins warranty.

@TadykaGuitars 3 ай бұрын

Well, that’s if u are in US I guess 🌚

@Michael-bm8hi 3 ай бұрын

@@TadykaGuitars same in Europe

@Allexxios 3 ай бұрын

Чудова робота!👏🏻👏🏻👏🏻

@TadykaGuitars 3 ай бұрын

@@Allexxios дякую!

@robknights7205 Ай бұрын

My D28 I bought in 2000 gas the same problem . The binding has shrunk in length and pulled away from the body

@mwilsington 3 ай бұрын

I’m glad you were able to get guitar back in playing shape. Amazing what over humidification can do to a guitar. Was it moldy or stinky at all?

@TadykaGuitars 3 ай бұрын

@@mwilsington at first it was with weird smell, but after week of drying it mostly gone. After I finished the work there was any traces of moldy smell :) Thank you!

@jonathanhorne6503 2 ай бұрын

My1993 HD-28v has only had finish issues. The finish delaminates and chips off. I bought it ne and Martin doesn’t want to warranty repair it. As a septuagenarian it’s becoming hard to play, my 000-18 and slope shoulder Gibson get all the play now.

@LegsON 3 ай бұрын

Why won't Martin ever fix this production sin? GOOD LORD.

@zapa1pnt 3 ай бұрын

What production sin? This guitar came apart, due to excessive humidity. The same thing can happen to any brand.

@LegsON 3 ай бұрын

@@zapa1pnt No, Martin is infamous with their binding coming off issue. Happens several times less often to other American brands, I guess never to Asian.

@zapa1pnt 3 ай бұрын

@@LegsON: Oh, OK, you were just referring to the binding coming loose. In this case, it was a matter of humidity. What Usually happens, to Martins, is the plastic binding Shrinks, lengthwise and pulls itself loose. When that happens, you need to anchor the ends first, then work toward the middle, heating the plastic and stretching back into place, gluing and clamping quickly. That happened to mine, too. It is indeed a pain in the ass. 😁✌🖖

@greeremalachi926 3 ай бұрын

Same happened to my 2017 Martin 000-21 I traded it away

@TadykaGuitars 3 ай бұрын

Sad I really like triple 0 model, great guitar

@notabot6837 2 ай бұрын

Why not completely remove the top? If the glue is glad in a few places isn't it likely bad everywhere?

@TadykaGuitars 2 ай бұрын

@@notabot6837 I’m only doing it if it is necessary. It’s way, way more work. Top and sides could change shape after some time and it will be so hard to put it back together 🙃 And overall all repair could be more noticeable if I do so. And here situation was bad, but not as bad 😊

@billystephens9255 2 ай бұрын

Wow watching this martin come apart makes you wonder if they are worth the money they cost um no probably not.

@YegresAL 3 ай бұрын

Тітанична праця... Щоб телефоном не тиркатись - можна зробити якийсь аккаунт на другому девайсі та дзвонити собі по фейстайму. Тоді можна засунути телефон в корпус та в зрочному місці дивитись що там внутрі) Доречі от цікво наскільки ця робота буда б складніше/дорожче якщо знимати нижню деку? Все одно новий лак та поліровка + робити треба швидко щоб пластик байндінгу та/чи пікгарда не сжався - тобто те що корпус поведе не повинно бути проблемою, особливо якщо залишити пружини. Як то колись збирали класичні гітари...

@TadykaGuitars 3 ай бұрын

Дякую! З телефоном - норм ідея, рідко така потреба є тому якось не додумався :) А купити ендоскоп якось постійно забуваю Тут простише було так, бо у д28 задня дека не пласка. В ьакому випадку виходить дуже багато додаткової роботи 🙃