What does the SMT operator’s workplace look like. FUJI NXT III series

[@Maikeru722]

Looks way more relaxed than my SMT department.

[@harithonichanz1967]

Where you from

[@Maikeru722]

@@harithonichanz1967 Lippert Components

[@Maikeru722]

Detroit mi area

[@Maudib99]

I love being an SMT operator 💰

[@ypsilonro7365]

this is the easy part, the change product is hell part when you go trew change nozzles and solv alot of errors and problems is it right?

[@Hordeftw01]

FACTS. im not joking when i tell you one of our machine still uses windows 2000 professional, more time is spent changing over a line than actually running an order where i work most of the time lol

[@prmvlogs6207]

I feel you 😂😂

[@mrvayne01]

All day every diggity day, with constantly rotating middle and upper management that don't understand the process and don't care to learn it.

[@generaczarnypiatek9567]

We have slightly better security at work. First we scan the empty roll with the full one in "sherpa desktop". This operation changes the individual component code (hu) in the BOM in the system (by the way, it prevents confusing disks with a similar component code). Then, using the "refil" option, scan the new puck to the machine. To connect the tapes, we have copper connectors in the magazine, 20. On the new disc, we leave a foil longer than the tape, so that the feeder pulls the tape off the joint smoothly.

[@clarencelopez8942]

Is it a good job?

[@generaczarnypiatek9567]

​@@clarencelopez8942 At least when it comes to the company I work for, there are a lot of responsibilities in this work on the SMT line. We have 1 person working on most of our lines. You have to watch to load the PCB into the container, watch the amount of paste in DEK, and the filling level of the components on the machines. Before converting the line to the next product, you need to prepare SMED for the next product (bring it), check with the documentation that everything is correct (strencil code, program availability, number of pins for DEK ect.). Then, when retooling, you have to change the convoyers, deca, SPI, load the program in ASM Siplace, and change the furnace. After which you need to complete some documents. Changeovers are the worst and least enjoyable.

[@clarencelopez8942]

@@generaczarnypiatek9567 thank you so much for the info.

[@gobberrit3474]

WHY? tracking reels and instant verification is offered by fuji free of charge. not to mention that the nxt3s have a electical tester for all parts

[@robsontrind126]

@@clarencelopez8942 is chill but becareful if u do a shit and produce to much wrong your boss demit's u very fast

[@santosrglz]

The printing machine is DEK brand, very good. The mounting is FUJI and the reflow oven is JUKI

[@gobberrit3474]

jukI? u mean junky? we replaced our mydata/micronic smt machines with jukis, worst business decision EVER

[@rakeshsuthar]

Which model is this?

[@alpraexblade1587]

in my company, for mounting machine we use panasonic brand and we stock many reelpart at the mounting machine,, so we cannot change or add feeder when changing model

[@Spaul2285]

I am panasonic 602 npm Dx machine operator please need a job

[@martingonzalez-zl7qq]

Hello, is it difficult to use those Juki machines? I know how to use those other machines, not that help!!!

[@АлексейКорнев-р8ц]

Yo what's the name of this stapler for tape connection?

[@balbirkumarsanatn5153]

Hello sir, Which company is it? Is there a vacancy?

[@santosrglz]

I am from Mexico and in the factory where I work I do the same. There are 6 lines of smt. The company is called industries sl is american

[@HectorLopez-fw9mo]

Cuánto le pagan a un operador SMT?

[@santosrglz]

@@HectorLopez-fw9mo De dónde eres

[@hadigilang_official7276]

Im familiar machine fuji im from indonesia

[@mdparvezhossain4900]

I am from Bangladesh. I have two year experience as a SMT operator. I need a job. can you help me searching a job ?

[@al-baghdadi7854]

Bro i am going to start next but i am very nervous. Idk anything. Is it hard or is it enought to have a brain

[@CarlosMartinez-fv7dk]

Can someone explain what SMT is?

[@niume7468]

Surface mount technology

[@mrvayne01]

It involves the placement of electronic parts on a circuit board before it goes in a reflow oven which causes the parts to be secured on the board by solder joints.

[@PankajSharma-jj5db]

This is a worst job .

[@Alozhatos]

I’m working as DEK Technical Assistant. Same as my routine everyday.

[@thombaz]

Nice.

[@Alozhatos]

@@thombaz Sadly I do have a chemical allergic towards solder paste.

[@yogelectronics]

Nice

[@yogelectronics]

Which country

[@Alozhatos]

@@yogelectronics Malaysia.

[@carmeloperez5546]

Donde está esa empresa tengo experiencia para manejar esas máquinas

[@martingomez1826]

Hello i was wondering if you could provide me a preventive maintenance informatio

[@차욱-r6w]

이렇게 느긋하게 자재연결하고잇으면 대한민국은 매거진으로 뚝배기맞음

[@germanarhipov8953]

Где в Китае можно пройти обучение работе на машине Fujitsu?

[@토맛토마토-v8c]

개웃기네ㅋㅋㅋㅋㅋㅋㅋ

[@hadigilang_official7276]

Where this

[@sheva2312]

La manera de colocar las pcb's en el magazin esta mal, debe ser de arriba para abajo.

[@rpearth2077]

I want to do this job because I have 2 years experience.

[@mittoay9865]

SMT công ty tôi đang làm kiểm soát vật liệu bằng hai hệ thống (Fuji mounter) và IMS, làm SMT vất vả đấy, 1 người làm nhiều công đoạn 1 lúc.

[@laurennguyen301]

Bạn nói chính xác

[@hadiamiri3664]

can some body explain to me,,,all of this machines ,is for what???? is this base of communication system??? base of fax ??? for example/,,,or what thanks?????????🙏

[@jamesflannery-serle3489]

The reels contain surface mountable electronic parts tiny 2mm 4mm ceramic capacitors chokes resistors small profile transistors diodes non polarised electrolytics ICs

[@hadiamiri3664]

@@jamesflannery-serle3489 oh,,,thank you my fiend, thats very kind of you🙏🙏🙏

[@aleydaalvarez4067]

En mi empresa super prohibidisimo Empatar rollos y mala colocacion de Pasata en Dek

[@anhnguyentien3625]

No ESD control :)

[@낮밤-g3f]

한국인입니다 SMT경력 15년 같이 일하고 싶습니다

[@罗跃德]

三星481plus比较好用简单 印刷机环城的

[@sonquangnguyen]

The name of Fuji smt M/C can be trust accurate placment and reliable ever I work nore than 28 year form fcp2, IP1 Up until now. give it correct part data or part sharpe every smt program will smooth to ride.

[@MsChen-lr1wf]

Nice

[@md.siddiq8535]

I'm doing NXT iii program

[@prmvlogs6207]

I have 5 years technician experience.

[@wisudiartiirni149]

For join component is very good

[@gauravuk0444]

SmT. Surface mount टेक्नोलॉजी

[@anikchakma6310]

wow,,, i can oparet this tipe smt mechin,,

[@hectorsantillan6459]

Si empatas cómo el muchas veces se revienta la cinta lo mejor sería dejarle una pestaña

[@FoxxoDev]

Yo lo que hago cuando el rollo está cortado al ras es abrirle un poco la película de cubierta y empatar

[@aleydaalvarez4067]

En mi Empresa es super Prohibido 🚫 Empatar

[@sohankumar44444]

Lava Main Smt Machine aise hi kaam karta hai

[@John-mb7yl]

Toilet breaks x 50

[@戴榮輝-i6h]

幹，臺灣，廣積很爛，為什麼不能接料

[@arashyusefi1889]

Thanks 😊👍💯🌹🌺🥀💐💖✨👑🆗🌿🌷🙏

[@mariaairinei3330]

Worst job I ever had.

[@tomaszadamowicz9786]

Moja też.!!!!! 2 lata w Kimall Electronics Poland. Dłużej nie wytrzymałem.!!!!

[@mariaairinei3330]

@@themememan5596 neah... 12 hour shifts, rubbish pay, and those screen errors...I could feel my blood boil. I had a colleague one night shift that felt asleep on the Panasonic.

[@dfttrapa]

easy long run job

[@cropside7949]

@@mariaairinei3330 What is the salary of an SMT operator in Poland?

[@mariaairinei3330]

@@cropside7949 în Ro was about 500 euros a few years ago